cnc machine center used for sale

internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with ...

- 10-STATION HORIZONTAL AXIS ROTARY TABLE, - bar max. Ø 60 mm;, - workpiece length max. 220 mm., - barr length max. 6.000 mm

ZM CNC microfeeder 800 x 1 mm

Vertical turning lathe SEDIN 1512 CNC CNC control- Eastern origin Table diameter: 1120 mm Max work-piece: -Diameter: 1250 mm -Height: 1000 mm -Weight: 3200 kg Table speeds range per 1 min: 5-250 Tool dimensions: 25×40 Max horizontal travel of the vertical ram: 775 mm Max vertical travel of the vertical ram: 700 mm Max horizontal travel of the horizontal ram: 630 mm Max vertical travel of the horizontal ram: 1000 mm Max turning angle of the vertical ram: 45 degree Cross rail: -Travel: 660 mm -Speed: 400 mm/min Main motor power: 30 kW Overall dimensions: 2750×2975×4100 mm Machine weight: 15700 kg

WAFIOS CNC winding and bending machine Type FTU5.3-98 Year of manuf. 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm WAFIOS CNC winding and bending machine Type FTU5.3-98 Built in 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm

SEDIN 1516 CNC Vertical Turret Lathe CNC control- Eastern origin Turning diameter: 1600 mm Table diameter: 1400 mm Max workpiece height: 1000 mm Max table loading: 5000 kg Max horizontal ram travel: 630 mm Max horizontal carriage travel: 975 mm Max vertical ram travel: 700 mm Max vertical carriage travel: 1000 mm No of feed carriages: 16 Carriages feed range: 0,07-12,5 mm/rev Distance between table and ram: 0-1225mm Fast stroke: 2000 mm/min Main motor power: 30 kW Speeds range: 4 - 200 rpm Dimensions: 3190x3360x4100 mm Weight: 18200 kg

Key data: 4000 mm, 1560 mm, 32

CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...

OFFER - KRÜSIMATIC from Krüsi G1 4 axis system 1 used carpentry machine from KRUeSI type Kruesimatic G1 Year of manufacture 2005 Can be operated with all carpentry programs such as Catwork, SEMA, Lockrichs, S & S, Nut Reiner, etc. 4 axis system with dovetail cutter Task / Editing from right to left 6 Side processing without having to turn the wood! Total length approx. 18 m Weight 5.5 t BTL controlled for interface to the office or of course manual input on the machine. To increase the cutting performance, the feed rate is frequency-controlled and can be optimized for many cross-cut cuts Platform height without floor shaft 920 mm Sections fall into mobile box incl. chips The system only needs to be connected to the electrical cabinet with plugs Max. wood cross-section - 200mm x 320 mm Plant set up and ready for demonstration Available IMMEDIATELY The entire system ha ...

x-travel: 1500 mm y-travel: 800 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 2,66 x 1,60 x 3,10 m CNC-controlled Coordinate Measuring Machine for fully automatic measuring of workpieces. Incl. Measuring Software MDM Metrosoft Level 2 for measuring of: - Points, surfaces, circles, cylinders, cones, distances and angles. - SPC software for statistic evaluation of the measurements Machine not operational! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4020 mm, 1 mm

with material thickness adjustment, hydraulics on the left side of the machine, without roller shears, bending beam with removable attachment rail approx. 8mm, 3 stop fingers, control on the swivel arm, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 4020 mm Sheet thickness max. steel: 1.5 mm Sheet thickness max. aluminium: 2.5 mm Sheet thickness max. VA: 0.8 mm Back gauge (max.): 1000 mm Projection: 1000 mm Colour: blue Total power requirement: 16 A Approx. space required: 6000 x 2000 x 1900 mm Weight approx.: 5000 kg Upper beam stroke (opening width): 200 mm without roller scissors Number of stands: 5 pieces Bending angle (max.): 145 degrees Machine Number: 0040-01

Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Control type (CNC/manual): CNC, CNC brand: FAGOR, CNC model: 8040-T, Dimensions ...

Key data: 8000 mm, 3 mm

Machine is in stabillier welded construction with 9 columns, 9 clamping cylinders and 36 coupling joints K38 mounted on a base frame The machine has the following equipment: CNC 8000 Control with Touch Screen TFT Color Display 17 Inch Attachment rail, brush table, upper beam with water seam groove Oil filling, fastening and levelling material, emergency stop rail via the Full length of the machine, integrated emergency stop operation in the foot pedal for upper and lower Bending beam, 2nd foot pedal for 2-man operation, upper bolster protection 2 short-part clamping fingers Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 8000 mm Sheet thickness max. steel: 3.0 mm Sheet thickness max. aluminium: 4.0 mm Sheet thickness max. VA: 2.0 mm Back gauge (max:.) 1150 mm Back gauge (min.): 150 mm Colo ...

G+H precision external cylindrical grinding machine RS 600 CNC / P for machining multiple diameters in a single setup, in plunge or oscillating mode. Grinding table driven by a digital servo axis, ball screw with a 10 mm pitch, axis speed 0.01 mm/min - 15 m/min, positioning via linear scale, resolution 0.001 mm, V-flat slide guide, guideways are Turcite-B coated. Disc feed support driven by a digital servo axis, ball screw with a 5 mm pitch, axis speed 0.01 mm/min - 10 m/min, positioning via linear scale, resolution 0.0005 mm, V-flat slide guide, guideways are Turcite-B coated. Workpiece headstock with digital servo spindle, positionable with initiator for detecting the reference mark, adjustable 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm. Center height  ...

Centerless grinding machine - centerless Ghiringhelli M100 CNC 1A 400x100mm wheel CN 1 axis plunge + through feed grinding The machine can be seen working in our warehouse in Gussago BS. Mimu(dot)com machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 100, Wheel diam ...

gasleiding: Ø50 x 3,91 mm stalen buis: Ø60 x 3 mm roestvrijstalen buis: Ø60 x 2 mm koper/alu buis: Ø64 x 4 mm massieve staaf: Ø35 mm massieve rechthoekige staaf: 60 x 10 mm vlakke staaf (hard): 60 x 16 mm platte staaf (gemakkelijk): 60 x 30 mm doosdoorsnede: 60 x 30 x 4 mm maximale straal: 200 mm buigsnelheid: 1,25 amp; 2,5 rpm video klik hier Length: 900 mm Depth: 400 mm Height: 1100 mm Weight: 140 kg

Centreless grinding machine GHIRINGHELLI M2200 CNC 5 axes grinding wheel 200x610 CNC FANUC 5 AXIS Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy), Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: piecesﻠ...

Distance between points: 1000 mm, Height of points: 250 mm, Axis B: Accuracy 0.1 , CNC brand: Kelco , CNC model: 90, Left grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 63 mm, Right grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 50 mm, Rotation of the workpiece head: -30º +120º , Workpiece holder head cone: MK 5, Max. workpiece weight between points: 150 Kg, tailstock cone: MK 4, Counterpoint reed route: 50 mm, Max tangential speed: 32 m/s, High-frequency internal grinding spindle: Ø120 mm, High-frequency internal grinding spindle brand: WARNER model K 3.000, Main engine power: 7.5 Kw, Total power: 26.5 Kw, Max travel Z axis: 1.150 mm, Max speed Z axis: 15 m / min, Work table rotation: 0º to 9º, Max travel X axis: 320 mm, Max speed X axis: 7.5m/min, Long: 3600 mm, Width: 2000 mm, Weight approx.: 5.000 Kg

Key data: 6020 mm, 1 mm

With hydr. Roller shears SM 1.5 and depth stop (4 stop fingers). with emergency stop rail, slide-back sheet metal supports and control on the swivel arm, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 6020 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.80 mm Back gauge: 1000 mm Colour: blue Total power requirement: 16 A Dimensions: 6810 x 1580 x 1870 mm Insertion depth: 1000 mm Machine weight: 3000 kg Upper beam stroke: 200 mm Roller shears motorized Number of stands: 5 pieces Opening width: 200 mm Bending angle: 140 degrees Back gauge: 25 mm Machine number: 9888-10

Distance between points: 1000 mm, Max external diameter to be rectified: 320 mm, Working wheel dimensions (od x id x width): Ø500 x Ø127 x 80 mm, Max internal diameter to be rectified : 200 mm, Height of points: 175 mm, Control type (CNC/manual): CNC, CNC brand: FANUC, CNC model: 16GC, Maximum length to be rectified: 1000 mm, Max. piece weight: 130 Kg, Maximum length to be rectified in plongeé: 80 mm, Main engine power: 7.5 Kw / 2870 rpm, Ø min/max to be rectified: 2 - 320 mm, Total power: 30 Kw, Indoor power head: 15 Kw, Turning range: 220º, Max. revolutions of the workhead: 30 - 750 rpm, Strain: 380 V / 50 Hz, X-axis feed: 0.0001 – 5,000 mm/min, main engine: 7.5 Kw, Z-axis feed: 0.0001 – 10,000 mm/min, Air pressure: 1.5 - 3 bar, Coolant flow rate: 100 L/min, Max travel Z axis: 1050 mm, Max travel X axis: 275 mm, Max. rotation of workpiece table: 8.5º, Inner cone of workpiece  ...

- Two-roller technology - 180° arrangement of wheels - Closed work area with coolant and lubricant equipment - Hydraulic roundabout centering device - Gearbox with oil circulation lubrication -Temperature Specifications: Workpiece diameter (max.): 360 mm Blank diameter (max.): 380 mm Workpiece length (max.): 600 mm Center width (max.): 1,340 mm Tip width (min.): 200 mm Tool holder DIN 55026: Gr. 11 Force per axis (transverse) (max.): 117 kN Axle force (longitudinal)/feed axle (max.): 140 kN Stroke (transverse): 190 mm Stroke (longitudinal): 690 mm Feed axis speed: (max.) 1.8 m/min Rapid traverse (longitudinal): 7.0 m/min Adjustment roller (axial): 0-20 mm Stroke ejector: 380 mm Ejector force: 26 kN Tailstock stroke: 800 mm Tailstock force: 5-19 kN Speeds (infinitely adjustable): 6-231-387 min-1 25-850-1,550 min-1 Main drive (DC motor): 33  ...

Inv. Num. : 8852 Type: SKJ 8 CNC Producer: TOS Created: GO 2006 Parameters: Control system: MEFI CNC 859 Table diameter: 780 mm Motor power: 40 kW Max. workpiece diameter: 1050 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Weight: 9000 kg Equipment: Ant electric drives

Key data: 6400 mm, 1 mm

used Jorns double bending machine, with the following equipment: - 4 pneum. Clamping finger with short-part clamping finger - Attachment rail - Foot control - Sheet metal cassettes - Upper beam with rebate groove - Hydr. Material thickness adjustment - Clamp and angle stop (Matic) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6400 mm Sheet thickness max. steel 1.5 mm Sheet thickness max. aluminium 2.0 mm Sheet thickness max. VA 1.0 mm Back gauge (min.) 15 mm Back gauge (max.) 1125 mm Colour anthracite/light grey Total power requirement 20 A Dimensions 7332 x 3721 x 2040 mm Weight 9250 kg Upper beam stroke (opening width) 200 mm Bending angle (max.) 145 degrees Crowning manual without roller scissors Number of stands 5 pieces Insertion depth 1150 mm Machine number K13036

Key data: 8020 mm, 3 mm

with hydraulic scissors, emergency stop rail, attachment rail, control on the swivel bracket, radius adjustment. The connection Hydraulic power unit is behind the machine. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 8020 mm Sheet thickness steel: 3.0 mm Sheet thickness aluminum: 4.0 mm Sheet thickness front: 1.5 mm Back gauge (max.): 1000 Radius: 1020 Colour: grey/blue Total power requirement: 46 A Space requirement: 10,000 x 2,300 mm Insertion depth: 1000 Machine weight: 8000 kg Oberwangenhub: 200 Roller shears: 3.0mm Number of stands: 10 with cutting device for cutting to length/ Öffnungsweite_ h 200 Max. bending angle: 143 crowning without underbeam adjustment Back gauge (min,) 15 Machine number: 09488-01/K19149

1 piece surface grinding machine FS 640 SC with Fagor control Make: Geibel&Hotz Year of Make: 2010 Technical data Working Range: Grinding area - Maximum grinding area 600 x 450 mm - Standard magnetic plate dimensions 600 x 400 mm - Clamping surface table to spindle centre 140 - 525 mm - Standard grinding wheel 300 x 50 x 76.2 mm - Table load incl. magnet 600 kg - Power grinding spindle motor approx. 3.7 kW - Total connected load approx. 11 kW - Table speed 2 to 28 m/min - Transverse/vertical speed 100-1000 mm/min Dimensions 3.95 x 3.16 x 2.47 m Machine weight approx. 2.1 t Facilities machine-specific accessories, belt filter system, magnetic separator, extraction Magnetic clamping plate with adhesive force control, automatic dressing incl. compension, Dressing diamond, balancing device, clamping device, 4 grinding wheels

This SPINNER PD-CNC was manufactured in 2006. A reliable horizontal turning machine, it offers solid performance for your machining needs. Consider the opportunity to buy this SPINNER PD-CNC horizontal turning machine. Contact us for more information.

This Takisawa LA-300 CNC was manufactured in 2018. A robust horizontal turning machine featuring a spindle speed of 3,500 rpm, maximum turning diameter of 450 mm, and a 12-position tool turret. It includes a FANUC Series 0i-TC control for precise operations. If you are looking to get high-quality turning capabilities, consider the Takisawa LA-300 machine we have for sale. Contact us for further details regarding this machine.

This 4-axis PENTA 1060 CNC die-sinking EDM machine was manufactured in 2014. Ideal for detailed and precise metalwork, it offers advanced control and efficiency. Consider the opportunity to buy this PENTA 1060 CNC die-sinking EDM machine. Contact us for more information.

This 4-axis TOS WFQ80NCA-CNC/50 boring machine was manufactured in 1990. Consider the opportunity to buy this TOS WFQ80NCA-CNC/50 boring machine. Contact us for more information.

This 4-axis Schaublin 140R CNC horizontal turning machine was manufactured in 2008. It features a CNC Fanuc 18i-TB control, a maximum turning diameter of 300 mm, and a spindle speed range of 50 – 5,000 rpm. Equipped with a Y-axis and sub-spindle, it offers a turret with 12 driven tool stations. If you are looking to get high-quality turning capabilities, consider the Schaublin 140R CNC machine we have for sale. Contact us for more information.

This VOUMARD VM 110 CNC T was manufactured in 2008. A robust internal grinding machine, it features a GE FANUC Series 31i-Model A control, a maximum grinding diameter of 150 mm, and a depth of 80 mm. It supports a longitudinal travel (Z-axis) of 300 mm and a cross travel (X-axis) of 220 mm. Consider the opportunity to buy this VOUMARD VM 110 CNC T internal grinding machine. Contact us for more information.

This JUNKER EJ 29 CNC was manufactured in 2002. A robust cylindrical grinding machine, it features a grinding wheel diameter of 400 mm, motor power of 4.5 kW, and spindle speeds up to 1000 rpm. It can handle grinding lengths up to 600 mm and diameters up to 280 mm. Control is managed via a GE Fanuc Series 21i-T unit. Consider the opportunity to buy this JUNKER EJ 29 CNC cylindrical grinding machine. Contact us for more information.

CNC control max. rod Ø: 26 mm Max. speed: 50 - 7,000 1/min 3 Cross-supports 6-station turret Bwjwvu Neyhd Aqsu Ijh IEMCA BOSS 432/32 N Bar Feeder Max. bar length: 3,200 mm

max. wheel diameter: mm gear width: mm max. module: 0 min. module: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This GEPELEKTRO Phantom CNC was manufactured in 2020. It features a large working area with table dimensions of 12,000 × 3,000 mm and is equipped with a Lincoln Electric Burny Phantom II controller. It can handle flame cutting up to 300 mm steel and plasma cutting up to 50 mm steel. The machine includes a complete extraction system and Messer OmniWin 2019 software. Contact us for more information about this machine.

This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information.

This 3-axis ABERLINK Axiom Too CNC CMM machine was manufactured in 2016. It features a Renishaw TP8 measuring head with indexable joint and multiple ruby ball tips, ensuring precise measurements. The machine includes Aberlink3D software and a control system with a dual-core processor for efficient data handling. Options like automatic temperature compensation and a flexible fastener set enhance its functionality. If youre considering expanding your measurement capabilities, buy this ABERLINK Axiom Too CNC CMM machine. Contact us for more information.

This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine.

This 3-axis Coord3 ARES NT-L 10.7.5 CNC was manufactured in 2018. It features a high-precision RENISHAW PH20 motorized indexing probe head, RENISHAW UCC controller, and a robust aluminum alloy frame. The machine includes a black granite worktable with threaded holes for secure workpiece fixation. Ideal for detailed 3D measurements with a maximum speed of 500 mm/sec and acceleration of 1700 mm/sec². Contact us for further details regarding this machine.

This 4-axis MONTAVAR HBG 105 CNC was manufactured in 2009. It features X-axis travel of 2000 mm, Y-axis travel of 1250 mm, Z-axis travel of 1000 mm, W-axis stroke of 600 mm, and B-axis rotation of 360 degrees. Equipped with Heidenhain TNC 530 controls and a maximum RPM of 1200. If you are looking to get high-quality milling capabilities consider the MONTAVAR HBG 105 CNC machine we have for sale. Contact us for more information.

This 3-axis QUICK CNC KQ-63E was manufactured in 2025. Its a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information.

This 6-axis PEDRAZZOLI Bend Master 42 MRV IMS CNC was manufactured in 2001. It features a max tube diameter of 42 mm, a min tube diameter of 6 mm, and a max bending radius of 270 mm. With a power of 22 kW and a bending length up to 3000 mm, consider the opportunity to buy this PEDRAZZOLI Bend Master 42 MRV IMS CNC roll bending machine. Contact us for more information about this machine.

Key data: 5000 mm, 8000 mm, 4000 mm

Berthiez Vertical Turning Lathe • Year of manufacture: 1982 • CNC type: older system (CNC axes) Dimensions and Working Parameters • Table diameter: 5000 mm • Maximum turning diameter: 8000 mm • Maximum turning diameter at center: 5000 mm • Maximum workpiece height: 4000 mm • Ram travel (T): 3600 mm • Saddle travel (TA): 650 mm Speed and Power • Table rotation range: 0.6 – 60 rpm • Table motor power: 140 kW • Maximum load on hydraulic support: 160 t • Ram feed speed: 400 mm/min • Saddle feed speed: 2500 mm/min • Spindle rotation for milling: 0.01 – 0.50 rpm • Positioning speed: 0.001 – 0.50 rpm Tool Carriages 1. Hand-Operated (Primary) Carriage • Kulannum section size: 360 × 360 mm • Axial travel (CA): 2500 mm • Horizontal travel (CB): 3400 mm • Tilt range (E-F): 15° – 45° 2. Side Tool C ...

This 5-axis San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) was manufactured in 2000. It features a horizontal spindle orientation, a table size of 1,300 x 1,100 mm, and a tool magazine with 30 positions. Spindle speeds range from 20 to 3,000 rpm, and it includes a continuous rotary table. Consider the opportunity to buy this San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) boring machine. Contact us for more information about this machine.

Boring machine manufactured in 2007. This TOS WH 10 CNC features a work spindle diameter of 100 mm and a maximum workpiece weight capacity of 3000 kg. The machine includes a programmable spindle speed range of 10-1800 min-1 and a robust clamping surface measuring 1000 x 1120 mm. If you are looking to get high-quality boring capabilities, consider the TOS WH 10 CNC machine we have for sale. Contact us for further details.

This QUICK CNC KQ-62 Lite multi-spindle drilling machine was manufactured in 2025. It handles workpieces from 70 to 2400 mm in length, 9 to 60 mm in thickness, and 30 to 1220 mm in width. Features include a Higerman control system, dual 3.5 kW milling spindles at 18000 rpm, and comprehensive drilling units. Consider the opportunity to buy this QUICK CNC KQ-62 Lite multi-spindle drilling machine. Contact us for more information.

1 CNC cylindrical grinding machine Make: Buderus Model: CNC-335-I-A Year of Make: 2001 CNC control: Siemens 840C Bore machining range: 150 mm Maximum workpiece depth: 100 mm Largest external processing area: 150 mm Largest swing diameter over table: 310 mm Workpiece spindle speeds: 0 – 3000 rpm. X-axis table lifts: 1050 mm Z-axis: 300 mm Infinitely adjustable feed speed: 0.01 - 10 mm/min Stroke-dependent: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Machine weight approx.: 7.5 to.

This JUNKER EJ29 CNC was manufactured in 2002. It features a FANUC 21i-TB CNC control, servo drives for spindle and table axes, and a hydraulic/manual tailstock. The machine can handle workpieces up to 280 mm in diameter and 800 mm in length, with a grinding wheel diameter of 400 mm. Consider the opportunity to buy this JUNKER EJ29 CNC cylindrical grinding machine. Contact us for more information.

Technical data: Manufacturer: ogp Type: Smartscope CNC 250 Year of Make: 2004 Travel distances X/Y/Z: X 250 mm, Y 150 mm, Z 200 mm Scale resolution: 0.5 μm Condition Condition: Used Functional: Tested and fully functional

A hydraulic sheet punching machine Indumasch without sheet manipulation axes, but with CNC backgauges for manual sheet positioning, is available. Punching force: 40t, max. sheet thickness: 10mm, stroke rate: 150/min, max. punching diameter: 105mm, working dimensions X/Y: 1000mm/750mm, positioning accuracy: 0.1mm, weight: approx. 3500kg. Without tools. The controls were overhauled in 2014. Documentation available. An on-site inspection is possible.

VOUMARD Model: CNC 300 Condition: Excellent Year: 2007 Machine type: BU 1000 T L7400 Was recently removed from power due to routine upgrades and was making good parts with full functionality. Siemens 840D CNC Control. Manuals included. Has grinding capability for: Internal diameters External diameters Front faces Back faces Internal tapers External tapers Profiles Drive spigots Face keyways Cams Bilobes and trilobes Internal threads External threads Bearing tracks Travels Display .0001degrees or .0001mm A - 360 degrees - 34 t/min B - -20/+1 degrees - 240 degree/min C- 360 degrees - 500 t/min U- 300mm - 20 m/min X - 300mm - 20 m/min Z travel - 1000mm - 20 m/min 4 position turret Workhead Through Bore - 50mm Rotation Speed - 850 Max workpiece weight - 200 daN at 100 mm from flange Taper - metric 70 Weight - 8000kg