cnc lathe used for sale

Goodway GLS-200 CNC Lathe Machine is in very good working condition Machine has been worked on aluminium Production year : November 2017 Working hour : 340 (November 2023) Max. swing diameter Ø 500 mm Swing over saddle Ø 310 mm Max. turning length : 500 mm

Honor VL-400CM Vertical CNC Lathe Machine is in excellent condition Table diameter : 4000 mm Max swing diameter : 4500 mm Maximum turning diameter : 4500 mm Maximum cutting height : 2000 mm Maximum weight of workpiece : 40000 KG Distance from table to ram : 880-2320 mm

Doosan Puma V8300 CNC Vertical Lathe like new condition Control Unit : FANUC-Ä° Chuck : 24 inches Main Spindle Max Chuck 609.6 mm (24) Max Turn Length 750 mm Max Turn Diameter 830 mm X Axis Rapid Traverse 20 m/min Z Axis Rapid Traverse 20 m/min Swing Over Bed 920 mm Spindle Power 37 kW Spindle RPM 2,000 RPM

Mori Seiki SL-25L CNC Lathe The machine is to be sold with errors on the circuit board. Estimated repair cost: NOK 100,000 - 200,000.(8500-17000 EUR) The machine has been in full operation until the fault occurred. Tools are not included. Specification: Control: FANUC Turning length: 530.9 mm Chuck diameter: 259.1 mm X-axis: 195.6 mm Z-axis: 589.3 mm Spindle bore: 78.7 mm Number of tool positions in the magazine: 10 Turning speed: 3500 rpm Spindle motor power: 14.9 kW Tailstock: No Bar feeder: No Length x width x height 3175.0 × 1798.3 × 2057.4 Weight: 5390 kg

Haas ST 30 Y CNC Lathe with very low working hour Cycle time of 3800 hours, so it is relatively new machine. It has turret with BMT65 holders. Machine in full spec; Part catcher Tailstock Renishaw tool setter 20 bar high pressure coolant Cool cabinet for electro wardrobe 3 pieces fixed axial tool holder BMT65 3 pieces fixed radial tool holder BMT65 Only 4000 working hours, yom. 2019 VPS(active visual programming system) NGC new generation of numeric control 10“ jaw chuck Machine is working under power in full capacity.

Doosan LYNX 2100 LYB CNC Lathe Max. Turning Diameter 300 mm Max. Turning Length 510 mm Fanuc control unit Machine is in excellent condition 8 & 10 inch C / Y Machine has been installed March 2023 Low working hour Only aluminium has been done on the machine

Mori Seiki SL 303 MC/1500 cnc lathe Mori Seiki SL 303 MC / 1500. 3-axis machine. Turret with 12 stations, all of them motorized. C axis. Autoblok hydraulic rear window diameter 245 mm. Automatic and programmable doors. Integrated main head motor 22/18.5 KW. Direct motor powered tools 7.5 kW. High chip removal torque 920 N/M. Main head size A2-11. Bar pitch 90 mm. 250 mm Autoblok spindle plate with metric system. Plate with quick change of claws. Independent and programmable tailstock in Z axis movement by hydraulic fixation with M codes. Prismatic guides on all axes. Main head speed 3,000 rpm. Motorized tools speed 3,000 rpm. Turning diameter 755 mm. Machinable diameter 450 mm. Machinable length 1,450 mm. Mapps II conversational automatic programming system. 3D graphic simulation of part and machining times. Automatic effort control and too ...

Used Menti 250 BM cnc lathe + Bar feeder Pietro Cucchi Visible in Italy Year 1997

For sale here is a CNC lathe in very good condition. Year of construction: 10/2019 Machine hours: 1294 hrs. Control: Siemens Sinumerik 828D with workshop-compatible shop turn Main spindle chuck size: 200 mm Max. swing Ø over bed: 610 mm Max. turning Ø: 270 mm Max. turning length: 510 mm X/Z travel: 200 / 560 mm Y travel: 110 (z 55) Max. Bar capacity: 65 mm Main spindle Spindle speed: 4500 rpm Number of driven tool positions: 16 BMT 45 Machine weight: 5700 kg - Siemens touch display 15.6 - Jaw chuck Ø 200 mm - C-axis - Y-axis - Chip conveyor -Parts catcher - Tailstock (programmable) - Coolant unit, 20 bar - Work area light; foot pedal, chuck; Machine status light, multi-coloured - CE test Tools: - 7 driven tools - Various tool holders + tools Machine is connected and can be inspected by prior arrangement. Please send us a message and we will get back  ...

Dugard Eagle 32 Mini Tur cnc lathe Production year: 2008 Bar diameter (spindle bore): Ø32 mm Spindle revolutions: 6000 rpm Spindle power: 3.5 kW Rapid feeds (X / Z): 18 m / min Number of tools in the head - 8 pcs. Control system: Fanuc 0i-TC Space requirement: 1950 x 1450 Machine height: 1600 The machine works with a 3 m long Barload automatic bar feeder.

Okuma Space Turn LB4000 EX CNC Lathe with C Axis 100% Japanese origin OSP P200L with Controller, (new control unit, touchscreen, Windows based) You can transfer programs wirelessly, with USB, with cable, 4GB hard disk available All books and CDs are available. With the IGF dialog program, you can make the programs systematically and very easily without using G and M codes. Load monitor is available, anticipates the tool will break With 12 inch chuck, kitagawa chuck is like new, It is 1600 mm length, 2008 model, brand new installed in Turkey in 2010, You can bring your part, process it, test it and get it It is rigid and precise, you can machine parts with grinding quality, Tool measuring arm is available, It is automatic center. You can program it as NC, it is rotary center(You can hold parts with a diameter of 20-270mm) It has 4 driven tools and over 20 tool holders, The ...

Gildemeister Sprint 32 Linear CNC lathe with Boss 21 bar feeder Machines are in good condition

TRAUB TND 400 CNC Lathe, used - machine no.: 192 - operating voltage: 380 V - frequency: 50 Hz - control voltage: 22 V - valve voltage: 24 V - coupling voltage: 24 V - total nominal current: 102 A - total connected load: 48 kW - read off operating hours: 48739 - control system: TRAUB SYSTEM TX 8F - spindle passage: 65 mm - clamping chuck diameter: 200/250 mm - turning diameter over cross slide: 240 mm - turning diameter over bed: 480/170 - turning length: 800 mm - tool holders in turret: 12 pieces for cylinder shaft 40 x 63 mm - slide travel cross: 220 mm - slide travel length: 850 mm - rapid traverse cross: 10000 mm/min - rapid traverse longitudinal: 20000 mm/min - speed at drive wheel: 4000 rpm - ttailstock quill diameter: 85 mm - quill stroke: 140 mm - holder MK5 - press force of quill at 20/60 bar: 3300 N/10000 N - the machine is equipped with one tailstock, ...

Doosan Puma V8300 CNC Vertical Lathe like new condition Production : 11.2019 Max. turning dia. : 830 mm Maximum turning length : 750 mm Maximum spindle speed : 2000 rpm Fanuc control unit

The SF 55/1000 CNC lathe is in good technical condition. It is equipped with a hydraulic chuck with a dia. 300 mm and a tool head with 8 positions enabling automatic exchange. The rear tool holder can be clamped to the support. The machine can be tested. Accessories: rear knife holder Circulating diameter above the bed: 550 mm Revolving diameter above support: 310 mm Distance between spikes: 1000 mm Spindle drilling: 82 mm Spindle speed - range: 80-3500 Max. workpiece weight: 2000 kg

We hereby offer this used Doosan Puma GT2100 CNC lathe from 2021, located in Slovakia. With a generous 562 mm turning length, Fanuc i control unit, 4500 RPM spindle speed, and a robust 18.5 kW motor, this machine offers precision and power for your turning needs. Technical specifications: Year: 2021 Made in: South Korea Working hours: 630 hours Control unit: Fanuc i X-Axis travel: 230 mm Z-Axis travel: 580 mm Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Max turning diameter: 390 mm Max turning length: 562 mm Through hole diameter: 66 mm Chuck size: 203 mm Spindle speed: 4500 rpm Motor power: 18.5 kW Turret stations: 12 slots Dimensions: Length: 2940 mm Width: 1628 mm Height: 1700 mm Weight: 3700 kg

Stock number: 3840 CNC LATHE Manufacturer: OKUMA, Type: LT 300 MY Machine NO.: 123046, Year of manufacture: 2006 Specifications: Main motor power 22/15 kw Main spindle speed range 38-5000 rpm Bore through drawing tube 70 mm dia. C Axis - Main Spindle Movement 0.001 Degree Y axis 160 mm +/- 80 mm Tool turret 1 with 12 stations Powered stations turret 1 12 pcs. Motor power driven tools 7/3.3 Kw Tool turret 2 with 12 stations Powered stations turret 2 12 pieces Driven werkzeuumdr. 45-4500 rpm Counter spindle Counter spindle speeds 38-3800 pr/min Motor Power Counter Spindle 22/15 Kw Control OSP P200L Fabr. Spindle operating hours 16692 hours Controlled in 7 axes Accessories: Hydr. Chuck main spindle Kitagawa B210 mm dia Hydr. Chuck Subspindle Kitagawa B-210 mm dia Tool holder VDI Chip conveying. Mayfran  ...

Description: tool holders for CNC lathe VDI 30 = 25 pcs VDI 40 = 2 pcs weight approx.: 25 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 300 mm

Mazak Integrex 100-II SY 5 axis cnc lathe Double chucks Machine can be seen in working condition Control unit Mazatrol 640 M Swing length 755 mm Turning diameter 470 mm Swing over bed 470 mm X Axis travel 360 mm Y Axis movement 60 mm Z Axis travel 785 mm C-Axis index 0.001 degrees Spindle nose A2-5 spindle speed 6000rpm Engine power 7.5 kW Tool magazine 40 positions

Mazak Quick Turn Smart 200L CNC Lathe Machine is installed in 2017 Turning length : 1100 mm Turning diameter : 400 mm

We hereby offer this used Mori Seiki NL 2500 SY CNC lathe from 2008, located in Spain. Boasting a substantial turning length of 755 mm, this machine offers unparalleled versatility in shaping your metal components. Fueled by a robust 18.5 kW motor, it ensures powerful and precise machining operations. The machine is seamlessly controlled by the Mori Seiki MSX-850 III unit, providing advanced functionalities for efficient workflow management. Technical specifications: Control unit: Mori Seiki MSX-850 III Turning length: 755 mm Turning diameter: 365 mm X-Z axis fast traverse speed: 30 m/min Y-Axis travel: +- 60 mm Number of axes: 5 Bar pitch: 80 mm Spindle taper: A2-8 Secondary spindle taper: A2-6 Motor power: 18.5 kW Sub-spindle motor power: 11 kW Spindle speed: 4000 rpm Turret: 12 stations motorized Speed of motorized tools: 6000 rpm Dimensions: Length: 4420 mm Widt ...

We hereby offer this used Mori Seiki SL 303 MC / 1500 CNC lathe from 2003, located in Spain. Boasting precision and versatility, this powerhouse is armed with the advanced Mori Seiki MSX 501 control unit, ensuring seamless operation and control. With a substantial turning length of 1450 mm, it accommodates diverse machining tasks, while the formidable 3000 rpm spindle speed guarantees swift and accurate results. The dynamic motor power of 22/18.5 kW adds to its prowess, making it a reliable choice for demanding metalworking applications. Technical specifications: Control unit: Mori Seiki MSX 501 Turning length: 1450 mm Turning diameter: 755 mm Machinable diameter: 450 mm X-Z fast traverse speed: 25 m/min Bar passage: 90 mm Spindle taper: A2-11 Spindle speed: 3000 rpm Motor power: 22/18.5 kW Hydraulic steady rest Autoblok diameter: 245 mm Turret: 12 stations motorized Spee ...

We hereby offer this used Mazak Integrex 300 4 ST (2008) CNC lathe in Belgium. With approximately 40000 working hours, it features a spacious 1524 x 760 mm working area and a high-performance 12000 RPM spindle speed. Technical specifications: Control Unit: Mazatrol Matrix Working hours: 40000 H approx X-Axis travel: 630 mm Y-Axis travel: 230 mm Z-Axis travel: 1610 mm Max. Turning length: 1496 mm Max. Turning diameter: 660 mm Spindle speed: 3000 rpm Chuck Size: 10 inches Rapid traverse: 38 - 26 - 38 m/min Number of tools: 40 (Standard), 72 (Optional) Type of tool holder: Capto C6 Motor power: 25 - 30 kW Rated capacity: 102.2 kVA Dimensions: Length: 5100 mm Width: 2900 mm Height: 2798 mm Weight: 13300 kg Includes the following: -Recently equipped with a new spindle and W-Axis.

Description: Swing diameter max. 300 mm Travel - X 280 mm Feed rate X - axis 0.1 - 30,000 mm/min Rapid traverse X - axis 30 m/min Travel - Z 1,150 mm Feed Z - axis 0.1 - 60,000 mm / min. Rapid traverse Z - axis 60 m/min Spindle bearing diameter 90 mm Spindle head according to DIN 55026 - size A6 Speed 1 - 5.000 rpm Tool turret - number of stations 12 Tool holder Capto C4 Total power requirement 45 kW Description: CNC lathe with SIEMENS SINUMERIK 840D control, screw conveyor with chip breaker and return pump station, NC steady rest SMW-SLU-1-OLD Ø10-70mm, 12-position tool turret SAUTER 0.5.440.220, NC tailstock, Artis breakage monitoring, pick-up loading via pallet belt. Without coolant system, was connected to central supply. The machine can be demonstrated under power. turning diameter: 250 mm, Drehlänge: 400 mm, x-motion: 280 mm, z-motion: 1,150 mm, control: Siemens ...

Its brand new! Its never made chips! List of accessories and equipment included: - CNC lathe CC-6000 1.4kW with ballscrew, - lead screw protection, - safety cabin, - machine stand with storage, - automatic 8-tool changer, - manual tool holder - NCCAD 9 Turn lifetime license I tested the movements of the spindle, X, Z and turret tools with the software supplied, and all was OK. The price is negotiable (reasonably) and delivery possible. Photos and videos on request.

turning diameter:620 mm turning length:1000/1500/2000/3000 mm control:Fanuc/Fagor/Siemens max. swing over slide:540 mm bed width:350 mm spindle taper:As-8 spindle speeds:0-2500 1/min. spindle bore:105/155 mm transmission ratio:1 tailstock quill diameter:95 mm tailstock quill stroke:220 mm taper of tailstock quill:5 MK max. length of work piece:1000/1500/2000/3000 mm rapid traverse x/z:15/12 m/min power requirement:11 kW weight of the machine ca.:2300/2515/3010/3700 kg automatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 310 Series with Fanuc/Fagor/Siemens control Made in Europe For more information please see the attached documents

turning diameter:570 mm turning length:1000/1500/2000/3000 mm control:Fanuc/Fagor/Siemens max. swing over slide:490 mm bed width:350 mm spindle taper:As-6 spindle speeds:0-3000 1/min. spindle bore:80 mm transmission ratio:1 tailstock quill diameter:95 mm tailstock quill stroke:220 mm taper of tailstock quill:5 MK max. length of work piece:1000/1500/2000/3000 mm rapid traverse x/z:15/12 m/min power requirement:11 kW weight of the machine ca.:2250/2475/2970/3640 kg automatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 285 Series with Fanuc/Fagor/Siemens control Made in Europe For more information please see the attached documents

turning diameter:450 mm turning length:1000/1500 mm control:Fanuc/Fagor/Siemens max. swing over slide:260 mm bed width:300 mm spindle taper:As-6 spindle speeds:0-3000 1/min. spindle bore:65 mm transmission ratio:1 tailstock quill diameter:68 mm tailstock quill stroke:200 mm taper of tailstock quill:4 MK max. length of work piece:1000/1500 mm rapid traverse x/z:15/12 m/min power requirement:9 kW weight of the machine ca.:1400/1680 kg automatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 225 Series with Fanuc/Fagor/Siemens control Made in Europe For more information please see the attached documents

turning diameter:360 mm turning length:750/1000 mm control:Fanuc/ Fagor/ Siemens max. swing over slide:300 mm bed width:250 mm spindle taper:As-5 spindle speeds:0-4000 1/min. spindle bore:42 mm transmission ratio:1 tailstock quill diameter:58 mm tailstock quill stroke:180 mm taper of tailstock quill:4 MK max. length of work piece:750/1000 mm rapid traverse x/z:15/12 m/min power requirement:7,5 kW weight of the machine ca.:1200/1490 kg automatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 180 Series with Fanuc/Fagor/Siemens control Made in Europe For more information please see the attached documents

control:SIEMENS SINUMERIK 840 C WORKING RANGE TURNING:. - swing diameter (max):300 mm MAIN SPINDLE:. - spindle revolutions (min):28 /min - spindle revolutions (max):7000 /min - torque (max.):188 Nm X/Z SLIDE:. - x-axis traverse:920 mm - traverse velocity z (min):0 mm/min - traverse velocity z (max):24000 mm/min - traverse velocity x (min):0 mm/min - traverse velocity x (max):40000 mm/min - cutting force:8 kN X SLIDE:. - traverse velocity x (min):0 mm/min - traverse velocity x (max):40000 mm/min - rapid traverse x:40000 mm/min ELECTRICAL SPECIFICATIONS:. - mains power supply:54 kVA - mains voltage:400 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total height:2900 mm - total weight approx.:6500 kg Technical description : Vertical self loading CNC lathe

turning diameter:810/680 mm turning length:2.500 mm centre distance:3.040 mm swing diameter over bed slide:530 mm spindle bore:145 mm turning speed range:10 - 2.000 1/min spindle drive:76 / 63 kW turret (x-stations):12 Pos. tool taper:VDI 60 Torque:1150 / 4005 Nm rapid travel range:X12 / Z12 m/min max. workpiece weight between centers:4.000 kg max. workpiece weight -without tailstock:630 kg total power requirement:140 kVA weight of the machine ca.:17,6 t dimensions of the machine ca.:7,7 x 2,85 x 2,7 m CNC-lathe with tailstock - live tools 12 / 8 kW (85 / 105Nm), - spindle 2,5° indexing, - steady 50 -200mm, - hydr. 3-jaw-chuck, - chipconveyor, coolant device, - tailstock, tailstock quill: - MT 5, - dia. 160mm, - stroke 285mm,

Article: Hand-, Cycle- and CNC-Lathe Manufacturer: DMT Kern Type: CD480 Control: Haidenhain Year of construction: 2000 Machine has processed plastic Lead screw and/or lock case must be overhauled Sale without tool holder! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Technical data: Turning diameter over bed: 1260 mm Turning diameter at opening: 2700 mm Turning diameter at the pit: 3800 mm Turning diameter via slide: 900 mm Turning length: 4000/5000 mm

Technical data: Diameter over bed: 625 mm Turning length: 1500 mm Diameter via slide: 325 mm Spindle head shape: Cam-Lock Spindle drilling diameter: 105 mm

Technical data: The machine is completely overhauled in 2011 with new electrics, new wiring, including new control SIEMENS Sinumerik 840D max. circulating and turning diameter: 2,000 mm max. turning height: 1,500 mm Sheet disc diameter: 1,600 mm max. table load: 11.20 to. Cross-beam adjustment: 1,170 mm

CNC Heavy Duty Universal Lathe POTISJE PA45 Year of manufacture 1991 Machine complete In its working condition Very good condition Technical details : Swing over bed 910 mm Swing over carriage 630 mm Height of centres 450 mm Max turning lenght 6000 mm Longitudinal carriage feed Min 0,049 rpm Max 5,6 rpm Transversal carriage feed Min 0,024 rpm Max 2,8 rpm Morse taper 6 Spindle rotational speed Min 11 rpm Max 500 rpm Dismensions (lenght x width) 8725 x1400mm Main motor power 15 kW Weight 11000kg

Manufacturer: GORBREX Model: TKV 512 New in: 2015 CNC Control: SIEMENS SINUMERIK 828 Location: our warehouse Rudniki - Poland Machine fully modernized and modified of SEDIN 1512. Machine with new electrical unit, new lubrication unit, painted, slideways regrinded, replacement of worn mechanical parts. Machine will be equipped with new CNC control SIEMENS SINUMERIK 828. Delivery time about: 2 months Technical details Number of columns: 1 Number of carriages: 1 Type of carriages: Rotary head in 5 position or ram Number of axis controlled: X/Z Turning diameter: 1 250 mm Table diameter: 1 120 mm Max. Turning Height: 1 000 mm Max.weight of workpiece: 3 200 kg Table speeds: 5-250 rpm Number of table speeds ranges stepless: 3 Vertical travel in Z axis: Rotary head: 700 mm Ram: 1000 mm Horizontal travel in Z axis: 775 mm Range of working feeds: 2-2000 mm/min Rapid fee ...

Manufacturer: KRAMATORSK Model: 1A 660 Condition:Very good, complete. Year of manufacture: 1987 Control: CNC BOSCH M5 Distance between centers: 11.500mm Turning diameter Over bed: 1650mm Over cross slide: 1340mm Workpiece weight: max 25T Spindle bore: 105mm Spindle speed range: 0,5-250rpm Cross slide travel: 735mm Spindle stock pinol travel: 260mm Threads Meter: 1-96mm/r Whitworth: 20-3/8 Module thread D-P thread Size: Length: 17.100mm Width: 2.800mm Height: 2.000mm Weight: 46,5T

CNC-heavy duty lathe Kramatorsk 1A660 Year of manufacturing: 1984 Distance between centers: 11.500 mm Turning diameter: -Over bed: 1650 mm -Over cross slide: 1340 mm Work piece weight: max 25 tn Spindle bore: 105 mm Spindle speed range: 0,5 - 250 rpm Cross slide travel: 735 mm Spindle stock pinol travel: 260 mm Threads: -Meter: 1 - 96 mm/r -Whitworth: 20 - 3/8 -Modul thread -D-P thread Size: -Length: 17.100 mm -Width: 2.800 mm -Height: 2.000 mm -Weight: 46,5 tn Control: Bosch M5

Hydraulic pump motor Spare part for INDEX GE 42/GE 65 or GB Please refer to the nameplate for the performance data Price on request

Year of construction: 1998 Control: NUM with cellar software -4-way steel holder machine Dre diameter over bed: 1000 mm Dre Ø over carriage: 620 mm intake: CL 11 motor spindle: 37 kW speed 1500 rpm. Spindle bore: 105 mm Reitstock-Ø 125 mm Weight: approx. 8500 kg

Control: Z/32 Tip height: 500 mm top width: 3000 mm turning diameter: 1000 mm Dre Ø over carriage: 620 mm spindle nose: CL 11 motor spindle: 37 kW revolver 12 POS. (C axis) Chip conveyor speed: 1500 rpm Spindle bore: 105 mm weight: approx. 8500 kg

Control Siemens

CNC Control Traub System TX 8D C-axis/ Driven tools Bar feeder Stamag DN42 Collector of the finished parts Chip conveyor Internal liquid cooling Very good condition Max. bar diameter 42 mm Turning length 220 mm Hydraulic chuck Chuck- max. turning dia. 140 mm Max. turning diameter 140 mm Max. turning diameter over bed 390 mm Spindle boring 42 mm Number of turret heads- 3 -1st turret 12 tools -2nd turret 12 tools -3rd turret 4 tool Tool holders VDI 30 X axis travel 200 mm Z axis travel 300 mm Spindle speed 5600 rpm Max. bar length 4200 mm Max. working bars in dia. 42- 7 Total power requirement 34 kW Interlocking cover Total dimensions: 7400x1900x2400 mm Weight 4500 kg

turning diameter: 660 mm turning length: 2000 mm control: Fagor 8050 turning diameter over bed slide: 370 spindle diameter: 104 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe VDF / Boehringer, peak width 1000 mm, control has been converted to Siemens

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16 Operating hours: 5859 Technical data Distance between centres: 610 mm Swing over cross-slide: 300 mm Swing over bed: 450 mm Max. turning diameter: 525 mm Spindle hole: 52 mm Turning diameter: 210 mm Turning length: 525 mm Carriage: Longitudinal travel (Z-axis): 560 mm Transversal strocke (X axis): 135 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 6 Inner cone diameter: 32 mm Indexing time: 0.7 sec Taper in spindle:: JIS A2-5" Spindle speeds: stepless from: 60 rpm up to: 6000 rpm Taper in tailstock: Morse taper: 4 MT Spindle stroke: 80 mm Spindle diameter: 75 mm Feeds: stepless longitudinal from: 1 mm/min up to: 15000 mm/min transversal from: 1 mm/min up to: 12000 mm/min Spindle motor: 11  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS 840 D Technical data Number of axis total: 7 Number of spindles: 2 Number of revolvers: 2 Spindle nose: DIN 55026 A4 Spindle hole: 32 mm Travels: X1: 180 mm X2: 195 mm Z1: 340 mm Z2: 440 mm Y1: +40/-40 mm Y2: +40/-25 mm Y axis: 70 (-30/+40) mm Turret slide: number: 2 Number of positions turret 1: 16 Number of positions turret 2: 12 Driven tools turret 1: 16 Driven tools turret 2: 12 Spindle speeds: 6000 rpm Power of driven tools: 6 kW Spindle nose: VDI: 25 DIN 69880 Main spindle: C axis Spindle speeds: stepless up to: 8000 rpm Back spindle mobile: max. speed: 8000 rpm Power of back spindle: 12 kW Spindle motor: 7 - 9 kW Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Total power required: 25 kVA Total power required: 20 kW Machine ...