cnc lathe used for sale

CNC carousel lathe with tool changer.You Ji GTH-35/45 ATC-I. Built 2012.Fanuc 0i-TD CNC Control.Planchime diameter 3,500 mm.Hydrostatic table - Max load 50 t.swing diameter max. 4,500 mm.Turning diameter max. 4,000 mm.turning height max. 2,200 mm.Stoesselplanweg X -1.750/+2.160 mm.Stoesselsenkrechtweg Z 1.500 mm.Table drive 60/75 kW.Speed 2 x 75 mm.Torque at the table 67,330 Nm.Tool magazine with 16 places.Tool holder 7/24 BT 60.Place requirement 12,375 x 8,210 mm.Machine height 7,920 mm.Full cladding.3-colors Signal lamp.NEW - 200 operating hours ! Immediately available;; As good as new

CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 200 run hours !Available immediately.; As new

Turning diameter: 700 mm Turning length: 1105 mm Turret positions: 12 CNC Brand: Fanuc DAEWOO - PUMA 350 CNC Lathe Ø 480 x 1050 mm MACH - ID 6305 Make: DAEWOO Type: PUMA 350 Control: FANUC YOP: 1998 Max. turning Ø   700 mm X-Axis     362 mm Z-Axis     1.105 mm Spindle bore      91 mm Speedrange       3500 Rpm Spindle power       26 kW ATC / revolver      12 Control       Fanuc 18iT Chip conveyor       Yes Pinole taperMk     6 Mk Stroke pinole        120 mm Dimensions Length     4.000 mm Width       2.400 mm Height      2.300 mm Weight      8.200 kg

CNC lathe make MONFORTS type DNC 5Year 1995 with C-axis and driven tool stationsCircumference diameter: 560 mmNumber of revolvers: 2Travel distance Z1 / Z 600/600 mmTravel X1 / X 260/260 mmMax. Spindle distance: 1460 mmSpindle passage: 85 mmSpindle flange: A8 / A8feed drivesRapid traverse Z1 / Z 15/15 m / minRapid traverse X1 / X 12/12 m / minFeed force Z1 / Z 11900/11900 NFeed force X1 / X 6600/6600 NNumber of revolvers: 2Number of tools per turret: 12Straight shank: 40 mmTurning tool shank: 25 x 25 mmSpeed range: 5 - 4000 rpm.Drive power: 18/24 kWWith:- CNC control SIEMENS 840 C- C axis- 2 tool turrets with driven tool stations- without driven tools- 2 opposite spindles- 1 set of tool holders- Chip conveyorSingle-layered run!usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors except ...

CNC Lathe Fabr. VDF BÖHRINGER Type 180 CmYear of construction 1996Turning length: 500 mmMax. Circulation diameter: 330 mmMax. Turning diameter: 250 mmSpindle bore: 78 mmSpeed range: 50 - 4500 rpm.Spindle mount: DIN 55026/6Max. Torque: 800 NmFeed rate: - 10000 mm / minRapid traverse speed: 15 m / minDrilling force: 10 kNDrive power: 53 kWWith- CNC control SINUMERIK 840 C- Drum revolver with 12 tool holders- 6 positions with driven tool positions- 4 powered tools- many tool holders 40 mm- Bar feeder SIEMCA MO 4.6 / 4musedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Turning diameter: 290 mm Turning length: 640 mm Turret positions: 12 CNC Brand: _Unknown / Other Make Gildemeister Type CTX 400 E Year 1996 CNC Lathe with revolver Centre height (mm)Swing = 290 Center distance (mm)Length = 640 Spindle bore Bore = 72 Speeds 5000 Rpm Revolver 12 Positions Collet device + inserts

CNC lathe Manufacturer: Mazak Model: QT Nexus 200-II M Year: 2008 CNC: Mazak Mazatrol Matrix Nexus

CNC lathe make VDF BOEHRINGER type VDF 315 C-UFabr. -No: 1117.7007-26 built in 1989Technical specifications:max. swing diameter: 550/520 mmmax.working lengthways: 450 mmMax.processing lengthways on the drum turret: 280 mmTurning length: 2000 mmSupport path Z: 2227 mmSupport path X: 435 mmSpindle bore: 78/103 mmSpindle mount: DIN 55022/8Infinitely variable speed range: 16 - 2500 rpm.max.torque of the main spindle: 1600/2240 NmFeed speed: 0.1 - 10000 mm / min.Rapid feed: 10 m / min.Feed force: 15 kNNumber of tool stations: 12Switching time: 1 / 1.8 sec.Hydraulic pressure: 60 barDrive power: 43 kWDimensions without chip conveyor approx: 6000 x 2400 x 2400 mmWeight approx: 14.2 twith- three-jaw chuck 400 mm dia.- Drum turret 12 stations of which 6 with driven tools speed 60 - 2500 rpm.- CNC control Siemens Sinumerik 880 T- many tool holders- chip conveyor- Forkhardt power chucksusedPrice on ...

Turning diameter: 450 mm Turning length: 900 mm Turret positions: 12 CNC Brand: Siemens CNC Lathe with c-axisSPINNER - TC 800 MC  Max. turning Ø: 450mm X-Axis:         360mm Z-Axis:         900mm Spindle bore:   110mm Speedrange:     2600Rpm ATC / revolver: 12 Speed live tools:4500Rpm Chip conveyor:  Yes Tool eye:       Yes Length:         4700mm Width:          2000mm Height:         2200mm Weight:         7500kg

Turning diameter: 550 mm Turning length: 2000 mm Turret positions: 20 CNC Brand: Siemens CNC Lathe with y-axisWFL Austria - M55 Max. turning Ø:   550mm X-Axis:           550mm Y-Axis:           500 (-130/+270)mm Z-Axis:           2000mm Spindle bore:     100mm Speedrange:       4000Rpm ATC / revolver:   20 B-Axis Toolsystem:sK40 B-Axis Speedranges:3000Rpm B-Axis power:     15kW Chip conveyor:    Yes Pinole taper:     5Mk Stroke pinole:    160mm Length:           7000mm Width:            5000mm Height:           3300mm Weight:           16000kg

Turning diameter: 670 mm Turning length: 630 mm Turret positions: 0 CNC Brand: Fanuc CNC Lathe with y-axisTAKISAWA - NEX 908  Max. turning Ø:670mm X-Axis:        220mm Y-Axis:        100mm Z-Axis:        630mm Spindle bore:  52mm Speedrange:    5000Rpm Length:        3020mm Width:         1820mm Height:        2200mm Weight:        6000kg  

DMG Mori NLX2500SY/700 CNC Lathe CNC controller: CELOS ERGOline Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Swing diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross-slide mm: ø742 Bar work capacity mm: 80 Upper turret Number of tool slots St .: 10 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5,5/3,7 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18,5/15 Spindle bore mm: ø111 Spindle nose: JIS A2-8 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7,5 Spindle bore mm: ø73 Spindle nose: JIS A2-5 Counter spindle travel mm: 734 Equipment Chip conveyor Signal lamp Tool measuring arm part catcher various jaws various tools Working time hours Under power:35850(July 2022) Rated power kVA: 40,27

Mazak Integrex 200Y cnc lathe Swing: 21.226″ Chuck Size: 8″ Max RPM: 10,000 RPM Tailstock: Yes Control: CNC (Mazatrol Fusion 640T) Max Swing : 21.25″ Max Machining Length: 39.5″ Spindle Nose – Main: A2-6 Spindle Bore – Main: 2.4″ Spindle Speed – Main: 5,000 RPM Spindle Motor – Main: 30 HP Tailstock Travel: 37.5” Min Spindle Indexing Increment – Main/Sub: 0.001 X-Axis Travel: 15.87″ Y-Axis Travel: +/- 3.15″ Z-Axis Travel: 42″ Rotary Tool Speed Range: 10,000 RPM Tool Capacity: 40 Equipped with: Mazatrol Fusion 640MT Control (2) PCMCIA Slots / 2 GB Hard Drive Variable Feed Rate Control 10.4” Color CRT / RS-232 / 3.5” Floppy / (2)PCMCIA Tool Life Monitoring Tool Wear Compensation Tool Eye Measurement Background Tool Path Check EIA/ISO Option Package Door Interlock Coolant Through Milli ...

CNC turning lathe Brand: DMG Mori Model: MSL 60 Year of manufacture: 2010, Bar passage: 60 mm, C axis, 7 axes, Sub-spindle integrated in main turret for second operations, 2 turrets, Stationary tools on comb head, Battery tools second operations, Possibility of 4 tools machining simultaneously, CNC: Fanuc 31i, Main motor: 7.5 kW, Main spindle speed: 5000 rpm, Bar loader interface, Parts collector, Main clamp holder and secondary integrated head, Inspectable by a qualified technician, working

turning diameter:1600 mm turning length:12000 mm control:FAGOR 8050 Used CNC Lathe with FAGOR 8050 and extensive accessories. For further technical data and accessories, pls browse the Appendix. Parallellathe WMW mod. 4 GUIDE-WAYS ¦ CNC: FAGOR 8050 ¦ bed: monolithic ¦ centres height: 800 mm ¦ centres distance: 12000 mm ¦ swing over cross-slide: 1250 mm ¦ turret: automatic 4 positions ¦ tailstock: motorized ¦ tailstock connection: hydraulic ¦ platform: diam. 1000 mm ¦ steady rests: nr.02 ¦ chip conveyor Warranty: none Take advantage of the favorable leasing and hire-purchase terms from IKB Leasing. Ask us about it.

turning diameter:360 mm turning length:1000 mm control:Fanuc Oi-TF turning diameter over bed slide:300 mm max. swing over slide:190 mm bed width:250 mm spindle taper:A2-5 spindle speeds:0-4000 1/min. spindle bore:42 mm tailstock quill diameter:58 mm tailstock quill stroke:180 mm taper of tailstock quill:4 MK max. length of work piece:1000 mm rapid traverse x/z:15/12 m/min power requirement:7,5 kW weight of the machine ca.:1200 kg dimensions of the machine ca.:2250x1115x1630 mm automatic tool changer:8-fach CNC controller:Fanuc Oi-TF tools:1 Satz foundation bolts:1 Satz New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TD Made in Europe For more information please see the attached documents

turning diameter:1010 mm turning length:4000 mm control:FANUC OI TF max. swing over slide:718 mm bed width:500 mm spindle taper:A2-15 spindle speeds:0-1400 1/min. spindle bore:130 mm transmission ratio:2 tailstock quill diameter:120 mm tailstock quill stroke:300 mm taper of tailstock quill:6 MK max. length of work piece:4000 mm rapid traverse x/z:10/10 m/min power requirement:22 kW weight of the machine ca.:9500 kg dimensions of the machine ca.:6557x2202x2487 mm max. workpiece weight between centers:8600 kg automatic tool changer:8-fach CNC controller:FANUC OI TF tools:1 Satz coolant system:6 bar New CNC lathe KRAFT ST 500/3000 with FANUC OI TF Made in Europe For more information please see the attached documents

turning diameter:1300 mm turning length:5300 mm control:FAGOR 8055 max. swing over slide:900 mm spindle bore:150 mm transmission ratio:2, automatisch schaltend taper of tailstock quill:6 MK automatic tool changer:4-fach elektrisch CNC controller:FAGOR 8055, NEU control cabinet Siemens PLC:NEU New CNC lathe KRAFT ST 500/3000 with FAGOR 8055 Made in Europe For more information please see the attached documents

turning diameter:450 mm turning length:1000 mm control:FANUC OI TF max. swing over slide:260 mm bed width:300 mm spindle taper:A2-6 spindle speeds:0-3000 1/min. spindle bore:65 mm transmission ratio:1 tailstock quill diameter:68 mm tailstock quill stroke:200 mm taper of tailstock quill:4 MK max. length of work piece:1000 mm rapid traverse x/z:12/15 m/min power requirement:9 kW weight of the machine ca.:1400 kg dimensions of the machine ca.:2800x1215x1750 mm automatic tool changer:8-fach CNC controller:FANUC OI TF tools:1 Satz 3 jaw chuck Ø:200 mm live center:4 MK :aus Guss New CNC lathe KRAFT ST 225/1000 with FANUC 0i mate TD Made in Europe For more information please see the attached documents

turning diameter:450 mm turning length:1000 mm control:FAGOR 8055 max. swing over slide:260 mm bed width:300 mm spindle taper:A2-6 spindle speeds:0-3000 1/min. spindle bore:65 mm transmission ratio:1 tailstock quill diameter:68 mm tailstock quill stroke:200 mm taper of tailstock quill:4 MK max. length of work piece:1000 mm rapid traverse x/z:12/15 m/min power requirement:9 kW weight of the machine ca.:1400 kg dimensions of the machine ca.:2800x1215x1750 mm automatic tool changer:8-fach CNC controller:FAGOR 8055 tools:1 Satz :aus Guss New CNC lathe KRAFT ST 225/1000 with FANUC 0i mate TD Made in Europe For more information please see the attached documents

Article: CNC Lathe Manufacturer: Spinner Type: SB-CNC Year of construction: currently not known, estimated 1990 Control: SIEMENS SINUMERIK 810T Bar passage: measured approx. Ø 34.6mm -> nominal Ø 32mm? Tool turret: Manufacturer Sauter Machine has processed plastic The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: CNC Lathe Manufacturer: Spinner Type: BK-CNC Year of construction: currently not known, estimated 1990 Control: SIEMENS SINUMERIK 810T Bar passage: measured approx. Ø 34.6mm -> nominal Ø 32mm? Tool turret: Manufacturer Sauter Machine has processed plastic The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

turning diameter: 42 mm turning length: 250 mm control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-lathe with bar feed with Sameca bar feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mm turning length: 450 mm control: TX8D bore: 80 mm spindle speed:: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe fabr. SCHERER-FEINBAU type SNC 80Machine -No: 8079 Year 1995Distance between centers: 350 mmCircumference diameter over bed: 320 mmCircumference diameter over support: 160 mmPath Z + X: 250 mmSpindle mount: DIN 55021 / A 3Speed range up to: 6000 rpm.Feed infinitely variable: 0.1 - 10000 mm / min.Rapid traverse: 10 m / min.Quill stroke: 125 mmDrive power: 7.0 kWWeight approx: 2.0 tOutside dimensions approx: 2100 x 1500 x 1900 mmWith- Siemens control 810 T- power chuck- Linear turret with 4 tool holders- Cooling deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Star SR-32 Swiss Type CNC Lathe Machine is in working condition All maintenance has been done regularly FMB Bar feeder Chip and tool conveyor are included

Haas SL-10HE CNC Lathe 6 inch Without tailstock Machine is in good condition Machine can be seen in working condition

Mazak Quick Turn Smart 200 ML CNC Lathe with C Axis Mazatrol Control unit Machine is in good condition

FAT TUR560 MN X 1000 CNC lathe TUR560 MN X 1000 8 puppies 6 handles

HANWHA XE20 cnc lathe HANWHA XE20 2017 The machine is located in Spain. Weight 2500kg

Litz LT-400 CNC lathe Good condition, little wear, complete. 2011

Takisawa TS-4000YS CNC Lathe C and Y axis Double Chuck Number of live tools : 6

Mori Seiki NZ2000T2Y2 CNC Lathe Machine is in excellent condition Chip conveyor Short bar feeder Live tools(around 20 pieces) Fixed tool holder(Around 30 pieces) And many other tools and spare parts also included

Mazak Integrex 200 IV CNC Lathe 5+2 axis Simultanously Serviced by Mazak Machine is in good condition

Haas ST 25 CNC Lathe Chuck size : 10 inches Machine is in good condition and regularly serviced!

AVM DG13 CNC lathe visible in processing in excellent condition. Bar passage 90, with Cucchi loader for bar machining 8 station turret not motorized Fanuc 0T / C control BA100 collet holder Chip evacuator Filtermist fume extractor Various fixed tool holders

Working hours : 250 Hyundai Wia L 210LA CNC lathe with 250 working hours! Turning length : 530 mm Turning diameter : 350 mm

CNC lathe Manufacturer: Mazak Model: Nexus 200M Equipped with claws and tools

Mazak Integrex i-200 5 axis cnc lathe Machine is in good working condition Bar feeder is included 0,001 accuracy

DMC DL 8T 2 axis cnc lathe Fanuc control unit Swing over Bed(Max. wing dia.): 480 mm Max. Turning Dia.: 280 mm Machine is in excellent condition

Emco Turn 425 MC CNC Lathe 2 bar feeder 2 turret 4 spindle Machine is in good working condition

Takisawa TS-3000 YS 5 axis cnc lathe Machine is in excellent condition

Doosan Puma 280M CNC Lathe C axis Machine is in good working condition

Mazak Quick Turn Nexus 150 CNC Lathe Machine is in very good condition 8 inches Length : 500 mm Turning Diameter : 300 mm

Mazak Multiplex 6100Y CNC Lathe Maximum Machining Diameter 230 mm / 9.060 in Maximum Machining Length 170 mm / 6.690 in https://www.mazak.sg/machines/multiplex-6100y/

Samsung SMEC SL 2500Y CNC Lathe C and Y axis 10 inches 6 pieces axial live tools 2 pieces radial live tools BMT 65 turret Fanuc control unit Chip conveyor Machine is in excellent condition

Haas ST 30 CNC Lathe Chuck size : 254 mm Maximum Turning Diameter : 533 mm

Mazak Integrex 400Y 5 axis cnc lathe 12 inch chuck Turning length : 1500 mm Capto C6 holder Conveyor Machine can be seen in working condition

Doosan PUMA 280LM CNC lathe with C axis Length . 1050 mm Chuck size : 12 inch 5 live tools(4 horizontal + 1 vertical) Machine is in good working condition