129,231 used machines on RESALE, but how to find them? Machine Search
For sale Emco CNC double spindle lathe type Hyperturn 45. A very complete CNC lathe with left and right spindle, as well as an upper and lower turret. Both turrets have driven tool positions! The upper turret also has a Y-axis with 70 mm travel. Tool holder attachment VDI25, rod capacity left spindle is Ø 45 mm, maximum speed 7,000 rpm. Maximum diameter is Ø 300 mm. Maximum part diameter is 480 mm. The distance between the two spindles is 720 mm. Fanuc 18i-TB control. The machine is equipped with high pressure pump, chip conveyor with right ejection, parts catcher, manual collet devices, etc. Available from stock, subject to prior sale. The machine has a light layer of soot. This can be easily removed.
Offered is a CNC lathe (sub-spindle, milling/C-axis, Y-axis). Equipped with bar feeder for balls 120mm, incl. Fanuc six-axis robot M-16iB with R-30iA control for automated loading and unloading as well as a bunker for raw material supply. Machine is operational. Inspection possible by prior arrangement.
Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible.
Travel X/Z: 180mm/510mm, max. turning length: 500mm, max. turning diameter over bed/face slide: 440mm/254mm, spindle speed: 3600rpm, bore: 70mm, tool stations: 8, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2600mm/1650mm/1800mm, weight: approx. 4300kg, controls: Siemens Sinumerik. Including collet and jaw chuck. Documentation available. On-site inspection is possible. Expected to be available from April 2026.
A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible.
turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC lathe Gildemeister including a chip conveyor and a Forkat chuck is available. 1) Gildemeister NEF CT 60, year of manufacture: approx. 1982, distance between centers: 1000mm, turning length: 1000mm, max. turning diameter: 460mm, center height: 300mm, bed width: 450mm, spindle bore: 107mm, speed: 3015rpm, tool stations: 12, quill diameter: 100mm, quill stroke: 180mm, machine dimensions X/Y/Z: approx. 5400mm/2100mm/2000mm, weight: approx. 7000kg. 2) Chip conveyor Allweiler GB 30L 38L. Without Filter. Documentation available. An on-site inspection is possible.
A fully autonomous CNC dual-spindle turning machine Index is available. Turning diameter: 220mm, main spindle bar capacity: 65mm, main spindle power chuck diameter: 210mm, sub-spindle bar capacity: 60mm, sub-spindle power chuck diameter: 210mm, tool stations: 12, Y-axis travel: 120mm, gripper diameter range: 4mm-45mm/40mm-65mm, coolant pump pressure: 8bar, high-pressure pump capacity: 80bar, chip conveyor discharge height: 1250mm. Overall system dimensions X/Y/Z: approx. 9150mm/4350mm/2000mm, weight: approx. 10500kg, operating hours: approx. 92000h. Including bar loader FMB turbo 8-80 XT/3200A, automatic loading and unloading system alphaMAX 6-axis, chip conveyor, coolant system, high-pressure pump and spare parts. Operation with the loading and unloading system is designed for disc diameters from 80mm to 220mm. This is a fully automated system without operator. Documentation available. ...
CONTROLS CNC controls TRAUB TX 8 BASIC FUNCTIONS number of spindles: 1 number of x/z slides: 1 number of turrets: 1 live positions: yes number of c-axes: 1 WORKING RANGE TURNING swing diameter (max): 450 mm turning diameter (max): 350 mm bar diameter (max): 60 mm worpiece length max.: 490 mm MAIN SPINDLE spindle revolutions (max): 4000 /min c-axis: yes TOOL MAGAZINE number of positions: 12 ELECTRICAL SPECIFICATIONS total power consumption: 39 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 3150 mm space requirements -front/back-: 2100 mm total height: 2100 mm total weight approx.: 4000 kg ATTA ...
turning diameter: - mm turning length: - mm control: - : ohne Gewähr total power requirement: - kW weight of the machine ca.: 4 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Turning diameter over bed/face slide: 560mm/370mm, turning length: 2000mm, spindle bore: 90mm, speed: 1800rpm, dimensions X/Y/Z: approx. 3800mm/1700mm/2100mm, weight: approx. 3300kg, control: Bosch CNC Alpha 2000/2, operating hours: 60000. Including various holders, 3- and 4-jaw chucks.
A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026.
Turrets: 2, tool stations: 12, tool holder: VDI 40, max. turning diameter: 320mm, max. swing diameter: 390mm, spindle bore: 61mm, speed: 5000rpm, spindle power: 15kW, travel X/Z: 230mm/430mm, machine dimensions X/Y/Z: 3900mm/2000mm/2900mm, weight: approx. 8600kg. Including robot. Documentation available. On-site inspection is possible.
Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1) ...
Offered is a Traub TND 400. Center distance: 800mm, turning diameter approx. 250mm, travel X/Y approx. 220mm/850mm, spindle bore: 65mm, speed range: 40-4000rpm, 12-position disc turret, tool holder: VDI40 DIN69880, integrated coolant system, dimensions X/Y/Z approx. 3000mm/2000mm/2000mm, weight approx. 4300kg-4500kg. Inspection by appointment possible.
A CNC counter-spindle lathe Index with Y-axis and bar feeder MBL 42 is available. Turning length: 400mm, turning diameter: 420mm, bar capacity: 60mm, speed: 6000rpm, machine dimensions X/Y: 4750mm/1950mm. Documentation available. An on-site inspection is possible.
control: Haas Automatic : 3 Backen x-travel: 850 mm changer: 12 fach serial number: 70422 total power requirement: 22 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 4000 mm width: 1800 mm height: 1800 mm : 5000 x-travel: 600 mm tail stock: ja tool adaptor: VDI 30 weight of the machine ca.: 5,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Fanuc length: 3700 mm width: 1850 mm height: 2000 mm accessories:: ja weight of the machine ca.: 4,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC slant bed lathe Okuma is available. Chuck diameter: 200mm, swing diameter: 400mm, turning diameter: 300mm, turning length: 470mm, tool stations: 8. Machine dimensions X/Y/Z: approx. 4000mm/2150mm/2150mm, weight: approx. 5500kg, control: OSP 3000 L. Documentation available. An on site inspection is possible.
turning diameter: 660 mm turning length: 2000 mm control: Fagor 8050 turning diameter over bed slide: 370 spindle diameter: 104 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 2400 mm turning length: 6000 mm control: Siemens 880T Turning diameter over slide: 1400 spindle diameter: 320 mm speed: 0.4 - 1000 m/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 220 mm turning length: 250 mm control: SIEMENS SINUMERIK 820 T swing diameter: 380 mm chucking diameter: 250 mm x-travel: 200 mm z-travel: 250 mm spindle turning speed range: bis 4000 U/min rapid travel - longitudinal/face: 15 m/min total power requirement: 27,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,2 x 2,9 x 2,2 m acc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible.
A CNC compact turning machine Eguro is available. Turning diameter: 350mm, machining diameter: 200mm, turning length: 200mm, speed: 5000rpm, bar capacity: 1inch, travel X/Z: 250mm/250mm, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/1200mm, weight: approx. 1250kg. An on-site inspection is possible.
machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-138
Swing diameter over bed/slide/bed bridge: 660mm/460mm/960mm, max. machining length: 300mm, distance between centers: 4000mm, turning length: 3680mm, bed width: 480mm. Spindle power: 15kW, torque: 1600Nm, speed: 2000rpm, travel X/Z: 316mm/3730mm, quill diameter: 105mm, quill stroke: 300mm, tool positions: 8, tool holder: VDI 40, chuck diameter: 500mm. Machine dimensions X/Y/Z: approx. 6700mm/2250mm/2300mm, weight: approx. 7200kg, control: Siemens Sinumerik 828D ShopTurn. Including additional 400mm three-jaw chuck, shims, hinged chip conveyor and working area enclosure. The lead screws of the X and Z axes were renewed in 2023. Documentation vorhanden. An on-site inspection is possible.
tooling cabinet not included machine ready for transport Auction-ID: A1-44905-4
X-axis: 300 mm Y-axis: 120 mm Z-axis: 800 mm machine ready for transport and to be assessed on viewing day 9 loading meters needed in truck Auction-ID: A1-44905-94
Max. turning Ø180 mm X-Axis 110 mm Z-Axis 300 mm Spindle bore 52 mm ATC / Revolver 12 Pinole taper 3 Mk Stroke pinole 40 mm machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-122
machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-137
machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-88
Make: Schiess AG Model: 14 DK 1250 Year of construction: 1982 Overhaul: Complete general overhaul in 2021 Control: Siemens SINUMERIK 840D (new in 2021) Condition: Used, fully refurbished Availability: Immediate delivery Machine type: CNC single-column vertical lathe Weight: Approx. 12,000 kg Technical specifications: - Turntable diameter: 1,250 mm - Table height: 1,000 mm - Max. workpiece height: 1,150 mm - Max. swing diameter: 1,400 mm - Support travel (right): 750 mm - Support travel (left): 180 mm - Max. traverse movement: 1,150 mm - Max. workpiece weight: 5,000 kg - Table speed: 3.15–315 rpm (2 gear steps) - Main motor: 40 kW, 100–2,800 rpm - Max. torque on table: 14,000 Nm - Max. cutting force: 50 kN Auction-ID: A7-45257-4
Three similar but not identical CNC sliding headstock automatic lathes Tornos including LNS bar loaders are available. 1) Lathe, axes: 9, spindles: 2, max. bar diameter: 10mm (one only 7mm), speed: 16000rpm, stroke: 66mm, machine dimensions X/Y/Z: approx. 1700mm/1050mm/2000mm, weight: approx. 1500kg, control: Fanuc. 2) Bar loader, bar diameter range: 1mm-12mm, loading capacity: 7mm/10mm: 36/24. Documentation available. An on-site inspection is possible. Individual sale of one lathe with associated bar loader possible by agreement.
Equipped with 3-jaw chuck ø 170mm, DMT control Auction-ID: A1-41275-8
Manufacturer: Nexturn Model: SA-20D Year of Manufacture: 2008 Machine Hours - Control ON Time: 36,985 hours - Automatic Running Time: 23,697 hours - Feed Time: 17,438 hours - Total Parts Produced: 1,188,215 Recent Maintenance & Overhauls - Sub-spindle replaced approximately 2 years ago including spindle bearings and sealing air - system retrofit - Y-axis fully overhauled in autumn 2025 (bearings and ball screw replaced) - X2-axis overhauled approximately 3 years ago Included Accessories - Loading magazine with additional channels - Various collets for main spindle and sub-spindle - Various guide bushings - Chip conveyors Find more here - / Contact us at -
Offered is a CNC vertical turning machine - pick-up system. Chuck diameter: approx. 160mm - 200mm, swing diameter: approx. 270mm, travels X/Z: approx. 500 - 600mm/approx. 160 - 200mm, max. spindle speed: 6000rpm, tool carrier: 12-station turret, drive system: Siemens SIMODRIVE 611, hydraulic unit: available, coolant system: including pumps and filter (One Eye Ind. magnetic filter installed), hinged belt chip conveyor. Inspection is possible by appointment.
Rotating diameter on the bench: 630 mm Maximum turning diameter: 600 mm Maximum length between tips: 2,000 mm Bar passage: 100 mm Self-centering chuck:400 mm Spindle speed: 1,800 - 2,000 Low rpm Motor power:30 / 37 Kw Fanuc Engine Floor space: 5,500 x 2,300 Height: 2,200 mm Machine weight: Approx. 12,000 kg Auction-ID: A7-44885-6
Takisawa EX 310 M motorized lathe Turning Diameter: 350 mm Turning Length: 600 mm Bar Passage: 75 mm Spindle: 10\" (ASA 8) | 3,500 rpm | 18.5 kW Turret: 12 BMT motorized stations Rapid (X/Z): 20 / 24 m/min CNC: Fanuc 0i-TD Functions: Manual Guide i, cylindrical/polar interpolation Length approx. 2,850 mm Depth (width): approx. 1,750 mm Height: approx. 1,850 mm Total Weight approx. 5.200 kg Auction-ID: A7-44885-15
YOU-JI Vertical Lathe Model YV-320 E Fanuc Control Maximum Turning Diameter: 450 mm Self-centering diameter: 200 - 250 mm (8\" - 10\") X-axis travel (horizontal): Approx. 200 - 250 mm Z-axis travel (vertical): approx. 400 - 450 mm Spindle speed: Up to 3,000 - 4,000 rpm Total Machine Weight: approx. 4,500 - 5,000 kg Ground Clearance (W x D): Approx. 1,600 x 2,400 mm Total Height: Approx. 2,600 mm Auction-ID: A7-44885-22
FANUC control, complete with chip conveyor, manuals present Auction-ID: A7-44885-23
HAAS ST-20 DATA SHEET (MOTORIZED) Control: Haas CNC (Fanuc/ISO compatible) Max rotation diameter: 533 mm Max turning diameter: 381 mm Max turning length: 533 mm Bar Passage: 51 mm (or 64 mm Big Bore) Main Spindle: 4000 RPM / A2-6 Turret: 12 BMT65 stations (all motorized) Driven tool speed: 6000 RPM C-axis: Integrated radial positioning Rapid (X, Z): 24 m/min Overall dimensions: 3300 x 1800 x 1900 mm Machine weight: 4100 kg Scope of delivery: 15\" monitor, 1 GB memory, cooling system Complete with books and motorized aggregates Auction-ID: A7-44885-13
Working Capacity: Maximum Rotating Diameter: Approx. 650 - 700 mm Maximum turning diameter: Approx. 550 mm Maximum turning height: Approx. 400 mm Autocratic Capacity: Usually mounted with 12\" (305 mm) or 15\" chuck Spindle speed: Typically up to 2,000 - 2,500 rpm Spindle attachment: A2-11 Engine: High torque for heavy duty machining (typically around 18.5 - 22 kW) FANUC Series 18-T Control Tool stations: 10 or 12 position automatic turret \"R\" configuration: version with live tools (BMT) and C-axis, allowing off-axis drilling and milling operations Guides: Integral prismatic guides for maximum rigidity and vibration damping during interrupted cuts Auction-ID: A7-44885-3
Maximum Turning Diameter: 390 mm Maximum Turning Length (L Version): 680 mm Self-centering diameter: 250 mm (10\") Bar Passage (Version C): 76 mm Spindle Speed: Up to 3,500 rpm (high torque) Spindle nose mount: A2-8 Total Machine Weight: Approx. 5,200 kg Floor Dimensions (W x D): Approx. 3,350 x 1,700 mm Maximum Height: 1,900 mm Auction-ID: A7-44885-5
Technical data Manufacturer: Colchester Model: MASCOT (Electronic Mascot) Machine Type: CNC Lathe Control: GE Fanuc Series 20-T Spindle speed: approx. 20 – 1600 rpm Spindle bore: approx. 74 – 76 mm Turning diameter over bed: approx. 430 mm Turning diameter over slide: approx. 260 – 270 mm Center width: approx. 1200 – 2500 mm Spindle motor power: up to approx. 11 kW Weight: approx. 2.2 – 3.0 t Configuration CNC control Fanuc 20-T Tool holder / turret (typical) Tailstock available Coolant Setup Closed machine enclosure Note The technical data was researched on the basis of publicly available information on the Colchester Mascot series. Original machine documentation was not available. Deviations are possible. Auction-ID: A7-45416-31
Technical characteristics: Control type: FANUC Number of pins: 2 Chuck diameter: 2 x 165 mm Number of tools per turret: 2 x 10 Maximum speed: 3,500 rpm X/Z Fast Forward: 24 m/min X/Z axis travel: 190 / 170 mm Auction-ID: A1-44765-645
Manufacturer: HARDINGE Year: 2005 Type: CNC Motorized Tool Lathe with C-Axis Numerical Control: FANUC 21i-TB Bar Capacity: Ø 51 mm Max. Turning Circle: Ø 310 mm Max. Turning Length: 470 mm Chuck: Ø 200 mm (8\") Bed Inclination: 45° Spindle: 50–5,000 rpm – 18.5 kW (max) / 11 kW (continuous) Turret: 12 stations, all motorable positions Motorized implements: 4,000–5,000 rpm – 3.7 kW Fast feeds: X/Z 19 / 24 m/min Accuracy: ±0.005 mm Included equipment: Programmable C-axis (0.001°), IEMCA Boss 545 bar feeder Weight (kg): approx. 4200 Auction-ID: A1-44765-272
CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AA Max. turning diameter: 165 mm Turning length: 100 – 340 mm Diameter above bed: 220 mm Main spindle speed: 50 – 5,000 rpm Main spindle power: 5.5 / 7.5 kW Main spindle bar passing: 65 mm Sub-spindle speed: 50 – 5,000 rpm Sub-spindle power: 3.7 / 5.5 kW Sub-spindle bar passage: 42 mm C-axis: 0.001° Turrets: 2 Tool positions: 2 × 16 Motorized tools: 2 × 16 positions Strokes: X 175 mm / Z 240 – 680 mm Total power: 41 kVA Dimensions (mm): 3,500 × 2,800 × 2,000 Weight (kg): 5,500 Auction-ID: A1-44765-236
maximum number of results exceeded
please refine your search
2.500 € 
