cnc lathe used for sale

Technical parameters Maximum turning length (travel in the Z axis): 540 mm Maximum turning diameter over bed: 530 mm Spindle bore: 65 mm Maximum turning diameter over carriage: 300 mm Maximum travel length in the X axis: 245 mm Maximum X-axis feed rate: 16 m/min Maximum feed rate of the Z axis: 24 m/min Maximum power of the main spindle: 11 kW Maximum rotation of the main spindle: 4500 1/min Lathe length: 3000 mm Lathe width: 1900 mm Lathe height: 1800 mm Lathe weight: 4.5 t Total number of tools in the VDI40 turret: 12 Tool measuring probe. Sleeve holder + sleeves in a full range of sizes. Additional jaw chuck. Free: Lots of VDI40 holders. Chip ejector Full documentation The machine did most of its work with plastic elements.

Tsugami B0326E-II CNC Swiss Type Lathe Machine has been installed in the factory in 2019! Bought brand new! Additional features which were added to the machine Main Side Left side ER16 3 x and ER20 1 x live tool slots available Main Side Right Side ER16 3 live tool slots available Chip Conveyor (Domestic) Opposite mirror 2 Extra Live Holder Slots Available Automatic fire extinguishing system available

centre distance: 2600 mm weight: 8 t : multifix: : 900 mm serial number: 152/03 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Twin Turret and twin Spindle Controller fanuc 31iA Main spindle bore diameter 51 mm Maximum Cutting Length 125mm Spindle Nose A2-6 Spindle Speed 5000rpm B axis Travel 635mm X axis Travel 190mm X2 axis Travel 175mm Y axis Travel +/-40mm Z axis Travel 500mm Z2 axis Travel 500mm

handle diameter – 210 mm turning diameter over the bed – 500 mm Maximum turning diameter - 200 mm Maximum turning length – 500 mm Maximum longitudinal travel of the sled – 600 mm Maximum cross slide travel – 160 mm Spindle hole diameter – 55 mm Spindle speed control (stepless) – 40-4000 r/m Tool shank size 25 x 25 mm Minimum entered value (Z axis) - 0.001 mm / (X axis) – 0.001 mm (in diameter) Tailstock sleeve diameter – 80 mm Maximum extension of the tailstock sleeve – 100 mm Rapid traverse (Z axis) – 20m/min / (X axis)-16m/min Tailstock sleeve cone – Morse 5 Main engine power (alternating current) – 11 kW Servo motor (Z axis) – 7 Nm / (X axis) – 7 Nm Hydraulic unit engine power – 1.5 kW Chip conveyor motor – 0.2 kW Coolant pump motor – 0.55 kW External dimensions (length x width x height) – 3900 x 1800 x 1750 mm Net weight – 5 ...

HD2200C turning center iTrol control (Siemens 828D) Machining field: -Maximum clearance above the bed mm Ø 550 -Maximum turning diameter mm Ø 390 -Maximum turning length mm 550 -Maximum rod diameter mm Ø 81 Spindle: -Handle diameter mm Ø 254 -Spindle speed rpm 3500 -Spindle motor power (constant/max.) kW 15/18.5 -Torque (constant/max.) Nm 245.4/403.6 -JIS A2-8 spindle nose Shifts: -Maximum travel X axis mm 215 -Maximum Z axis travel mm 580 -Rapid traverse in the X axis m/min 24 -Rapid traverse in the Z axis m/min 30 Guide type: -sliding Tool head: -Number of tool positions: 12 pcs -Tool shank square mm 25 x 25 - Round tool shank mm Ø 40 -Head rotation time (1 position) s 0.12 Horse: -MT4 cone -Pinola mm Ø 65 -Travel mm 513.7 Requirements : - regarding power supply: Maximum power consumption kVA 17 -Air supply pressure bar 5.51 -Air  ...

Brand gurutzpe Model a 1000 Reconstruction year 2019 Cnc fagor 8055 conversacional Technical details Travels travel longitudinal Z 3000 Travel longitudinal Z 640 Max. Diam. Turning over slideways 1100 Max. Diam. Over carriage 800 Distance between slide ways 685 Spindle Axe of spindle asa 11 Chuck diameter 630 Chuck clamping hidraulic Diam. Of principal axe 105 Cone morse 6 Gear of speed 2 gear Geautoatic change system hidraulic Max. Speed 1200 r.P.M. Main engine 60 kw Advances Workin advance 1000 in x 2000 in z Fast advance 6000mm/min Tail stock Tail stock axe diam. 140 Tail stock axe travel 300 Tail stock axe travel system hidraulic Cone morse 6 Turrets Number tools fo vertical turret 4 Number tools of horizontal turret 8 Max weight of piece Kg Between points 7000 Air with center of gravity 250mm 2000 Weight of machine Net weight 13.000kg Lay-out Hei ...

Complete turning centre, can also be used for long turned parts. Use of standard lengths of 6m for raw materials (bar loader). Machine with double turret, 24 tool positions in total. Machine with double spindle. Machining time 330 hours to date.

Gildemeister GMC20 ONE, Options / Accessories, - 5 Cross-slides pos. 1;2;3;4;5, - 2 Radial slides pos. 6 for cutting and rear-working operations, - 1 C-axis for the pick up spindle, - Pneumatic work-piece unloading chute for pos. 6, - Work-piece conveyor belt, - Swarf conveyor, worm type, - 5x Frontal tool spindle, fix, - Pick- up spindle in pos. 6, - High pressure coolant device 70l / 50bar, Country of origin: Italy, Control: Siemens 840D, Number of spindles: 6, Max bar diameter [mm]: 25, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 9,1, Z - travel [mm]: 70 / 140, Total power requirement [kVA]: 98, Weight of the machine ca. [kg]: 9.800, Auto bar loader: Cucchi Giovanni DBM.625

Control: SIEMENS 840D Max.turning length: 350 mm Max swing diameter over bed/slide: 320 mm/152mm Workpiece diametr: 310 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:8 Taper ? VDI20 Coolant tank:80l p

Control: SIEMENS 840D Max.turning length: 350 mm Max swing diameter over bed/slide: 320 mm/152mm Workpiece diameter: 310 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:8 Taper ? VDI20 Coolant tank:80l

Component size: Max. diameter 150 mm, height 112 mm, min. diameter: 70 mm, height: 64.2 mm CNC Path Control Sinumerik 840 D For more technical data, see PDF Electrified viewing possible in Bielefeld

Partial excerpt machine description (details on request): 6 motor spindles 5.5 kW max. speed 8,000 rpm. Spindle capacity 16mm, Z 50mm stroke; 6 slides x 40mm stroke 1 carriage for counter operation, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8,000 rpm, 150mm stroke, Rotating ejector with flushing HP Numerical control Fanuc 30i Parts disposal and pneumatic Slide plastic-coated Outer distribution belt larger capacity Active rod preference device Collets type F16 for active Bar preferential device Various clamping and reduction tubes Turning Tool Holder Base (16x16) Transverse drilling unit ratio 2:1 Max. 8,000 rpm - max. 4.4 Nm Front drilling unit ratio 2:1 Max. 8,000 rpm - max. 4.4 Nm Electrical control cabinet Oil tank 1,100 litres Coolant pump 100 l/min., 4 bar Paper filter system 50 μm Fine filter system 5 μm hydrostatic circuit Hy ...

twin spindles and C axis of the Muratec brand that we have for sale, machine currently in production and inspectable while machining part, attached main Muratec MT 25 MC. 7 axis machine. Double head, twin spindles. Motorized tools, C axis. Interface for loader of bars. Short bar loader, Multifeed 1.5 meter model. Automatic cleaning of heads by means of air. Automatic parts collector. Parts conveyor belt. Extractor arm for finished parts. Pneumatic parts ejector in second operation. 18.5 KW head motors. Size heads A2-6. Step of bar 65 mm. Prismatic guides in all axes. Vdi tool clamping system. 2 arms of automatic measurement of Renishaw tools. Two kitagawa cymbals on 10-inch main headstock. Fanuc programming system. Automatic effort control and tool consumption monitor. Speed fast displacements 20 m/min. Head speed 3,500 rpm. ...

Mori Seiki NL 2500 SMC. Year 2008. 5-axis machine. Subspindle. Turret with 12 stations, all of them motorized. C axis on both spindles. Integrated main head motor 18.5 KW. Integrated 11 KW sub-spindle head motor. Direct motor powered tools 5.5 kW. Engine starting torque 640 N/M. Motors without belts or steps. Main head size A2-8. Secondary head size A2-6. Bar pitch 80 mm. 250 mm main spindle plate with metric system. 170 mm subspindle plate with metric system. Prismatic guides on all axes. Main head speed 4,000 rpm. Motorized tools speed 6,000 rpm. Turning diameter 755 mm. Machinable diameter 365 mm. Machinable length 755 mm. Oil cooler for both Daikin heads. Mapps 4 conversational automatic scheduling system. Automatic effort control and tool consumption monitor. Rapid movement speed 30 m/min in the X and Z axis. Turret change indexin ...

Description of technical parameters of the machine : Max. turned diameter 600 mm, max. machined diameter 310 mm, distance between tines 3000 mm, max. machined length 2800 mm, CNC control system Mitsubishi M70L spindle clearance max. 104 mm spindle speed 2500 min-1 tool head with driven tools VDI-30 measuring by absolute optical rulers in X, Z axis with pressure protection against dirt ingress sliding, fixed lunette, chuck diameter 300mm belt-type scanner with oil skimmer air-conditioning of the electrical cabinet

Nakamura Take WT 300 MMY. 2 turrets. 2 twin heads. 9-axis controlled turning and milling center. Facing headstock machine. Upper turret with Y axis with +- 60 mm. Lower turret with C-axis driven tools. Both turrets with 12 stations each and all of them motorized. Possibility of setting with 24 tools in each turret. Motor power of both heads 15 Kw. Power of milling motors 5,5 Kw. Speed of both heads 4.000 rpm. Speed of motorized tools 5.000 rpm. Bars loader of 1,5 meters. Interface for any brand and model of loader. Front bucket type parts collector installed in the door. Rear parts collector gantry robot type with 3 Kg. capacity clamp. Cutting power 320 N/M. Distance between heads 980 mm. MQ system for tool clamping. Main spindle bar pitch 70 mm. Size of heads A2-6. Rapid traverse speed 25 m/min in X and Z axes. Indexing time for turret chan ...

Hwacheon Model: VT-550 2SP Serial No.: M088358K4G E Year of Manufacture: 2010 Maximum spindle speed : 2000 rpm Maximum turning length: Ø700 mm. Spindle height: 1230 mm Maximum tool diameter: Ø26 Magazine capacity: 2 magazines x 12 tools X axis: 350 mm Y axis: Z axis: 790 mm Control: Fanuc Series Oi-TD Machine weight: 13.000 kg (each machine) Power: 75 Kva Running hours: 45963 Hours. Cutting time: 20155 Hours.

cnc Mazatrol 640T Nexus passage bar 77 Max. diameter rotation (mm) 750 Max. diameter turning (mm) 420 Max. length turning (mm) 1,597 X-axis rapid feed (m/min) 30 Z axis rapid feed (m/min) 25 Spindle speed (rpm) 35 - 4,000 Spindle motor power for 30 min (KW) 26 Continuous spindle motor power (KW) 22 Tailstock body stroke (mm) 1,580 -Hydraulic chuck 12 Kitagawa B self-centering diameter 300 mm Spindle nose 8 JIS A-2 / ASA

Rotation diameter max. 360mm Turning length max. 500mm Seiki Seicos A 10L control maximum rotation diameter 450 mm main spindle: Speed range - main spindle 30 - 4,000 min/-1 Drive power - main spindle 11 / 15 kW Spindle assembly A2-8 maximum usable bar diameter 65 mm maximum spindle diameter 255 mm Distance spindle center - plane 1.015 mm racing: x-axis 265mm z axis 530mm C axis 360 Tool turret: Number of tool positions 10 pos. Outer diameter 25mm Inner diameter 32mm Type QCT / KV 40mm Tool holder no. 40 QCT Tool magazine: Number of tool places 12 pos. Maximum tool size 50 x 80/200 mm Maximum tool weight 6.0 kg Driven tool stations: Number of motorized tool stations 5 stations. Speed range - driven tool stations 100 - 3,000 min -1 Drive power - driven tool stations 5.5 / 2.2 kW Counter spindle equipped with C axis. Excellent supply of driven tool holders.

Distance between centers: 800 mm Max swing over bed: 920 mm Max swing over slide: 745 mm Ø bar passage: 66 mm Speed: 4000 rpm Year: 2016 Equipped with: Control: FANUC Series 32 High pressure pumps: in spindle and sub-spindle Chip conveyor: Yes Presetter: Yes Arm of piece extraction: Yes Automatic bar loader LNS SPRINT 565 S2: Capacity Ø5-Ø65mm. Length 3000mm

Complete with SCHMID LM 3200 bar loader Spindle passage 51 mm Turning length 280 mm Control SIEMENS, SINUMERIK 840 C INDEX control, C 200-4 Travel x1 90 mm Travel z1 280 mm Travel x2 81 mm Travel z2 80 mm Max spindle speed . 6300 rpm Rapid traverse Rev. 1 24/24 m / min Rapid traverse Rev. 2 16/24 m / min X / Z axis feed force Rev. 1 5500/5500 Nm X / Z axis feed force Rev. 2 8300/5500 Nm - Revolver 1 for 7 tools + synchronous spindle - Revolver 2 with 6 tool places - 4 rear drilling stations (1 of which guided) - C axis

FAGOR 8055TM CNC Description: - Distance between points: 1,000mm - Point height: 260mm - Diameter over bench: 530mm - Diameter admitted on longitudinal carriage: 475mm - Diameter admitted over cross slide: 315mm - Bench width: 350mm - 2 spindle speed ranges: from 0-625 rpm and from 625 to 2500 rpm - Work advances Z and X axes in mm/min.: 0-7000 - Rod pitch: 72mm - DUPLOMATIC turret with 8 tools It has all the manuals for both the lathe and the Fagor cnc. All tool holders and chuck jaws seen in the photographs are included. In 2021 a retrofitting was carried out. - Bench grinding - Preset spindles and axis nuts + change of axis balls - Change bearings axles + belts

Distance between points mm. 800 Max Turning Diameter mm. 300 Main spindle Spindle Nose (Asa Attachment) Asa A2-6 Spindle speed (Min./max.) Rpm/min. 4,000 Spindle Motor Power Kw Kw. 18.5 Bar passage mm. 65 Counter spindle Spindle Nose (Asa Attachment) Asa A2-5 Spindle speed (Min./max.) Rpm/min. 5,000 Spindle Motor Power Kw Kw. 11 Bar passage mm. 51 Number of upper turrets 2 Number of Lower Turrets 1 X Axis Travel mm. 200 Z Axis Stroke mm. 290 Y Axis Travel mm. 60 (+/- 30mm.) X Axis Travel 2 mm. 200 Z Axis Travel 2 mm. 290 Y Axis Travel 2 mm. 60 (+/- 30mm.) X Axis Travel 3 mm. 200 Z Axis Travel 3 mm. 771.5 Y Axis Travel 3 mm. 60 (+/- 30mm.) Fanuc 16it control Weight 10,000 kg

- Distance between points: 1,000mm - Point height: 260mm - Diameter over bench: 530mm - Diameter admitted on longitudinal carriage: 475mm - Diameter admitted over cross slide: 315mm - Bench width: 350mm - 2 spindle speed ranges: from 0-625 rpm and from 625 to 2500 rpm - Work advances Z and X axes in mm/min.: 0-7000 - Rod pitch: 72mm - DUPLOMATIC turret with 8 tools It has all the manuals for both the lathe and the Fagor cnc. All tool holders and chuck jaws seen in the photographs are included. - Bench grinding - Preset spindles and axis nuts + change of axis balls - Change bearings axles + belts

Complete with Lns Quick Load Servo Iii bar loader Max Distance between Tips mm. 970 / Min. mm. 210 Max Turning Diameter mm. 190 Main Spindle: Spindle Nose (Asa Attachment) Asa A2-6 Spindle speed (Min./max.) Rpm/min. 4,500 Spindle Motor Power Kw Kw. 11/15 Bar passage mm. 65 Counter spindle Spindle Nose (Asa Attachment) Asa A2-5 Spindle speed (Min./max. )g./min. 5,000 Spindle Motor Power Kwkw. 11/7.5 Bar passage 51 mm Number of upper turrets 2 Number of Lower Turrets 1 X Axis Travel mm. 167.5 Z Axis Stroke mm. 250 Y Axis Travel mm. 102 X Axis Travel 2mm. 167.5 Z Axis travel 2mm. 250 Y Axis travel 2mm. 102 X Axis Travel 3mm. 167.5 Z Axis travel 3mm. 685 Fanuc 16i-tb control Dimensions W D Hmm.3.930 X 2.270 X 2.110 2 High Pressure Pumps Paper Filter Conveyor Finished Pieces External mat Weight 12,000 kg Year 2004

CNC Fanuc Oi-TC Rotating diameter on the bench 510 mm Rotating diameter on the carriage 290 mm Maximum turning diameter 250 mm Maximum turning length 510 mm Turning diameter from bar 51mm X-axis travel 175 mm (160 + 15) Z axis stroke 550 mm Spindle speed Rpm 6000 Spindle motor 12 kW ASA A2#5 spindle connection Spindle hole Mm 53 Turret N 24 stations Hours of work No. 6323 MT4 tailstocking Dimensions Mm 2630 x 1670x 1650 Weight Kg 4000 Complete with: User manuals CE certification

Indramotion MTC micron numerical control (installed 2021) Rotation diameter over the bench 460 mm Swing diameter above the carriage 258 mm Rotation diameter under head 670 mm Point height 225 mm Center distance 1000 mm Guide distance 300 mm Spindle speed 0-3000 RPM SPINDLE ASA D1-6” Spindle hole 58 mm Self-centering hole 90 mm Maximum weight between points 400 mm Dimensions 2430mm long 1346mm wide 1545mm height Year 2001 Machine weight 1750 k

Fanuc CNC model Version of the CNC 18i - T Main spindle nose ASA 8 Main spindle power 15 Kw Turning diameter 350 mm Turning length 536 mm Main spindle rpm 3500 Number of tool holder turrets 1 Number of tool places first turret 12 Number of fixed tool places first turret 12 First turret X-axis travel 220 mm Z axis travel first turret 580 mm Linear axis rapid feeds X Y Z 30 m/min Counter spindle yes Number of counter spindle revolutions 6000 Bar passage 90 mm Counter spindle Z stroke 500 mm

CNC Year of construction 2006 FANUC CNC CAPACITY: -Maximum rotating diameter on the bench 685 mm -Maximum diameter on the carriage 510 mm -Maximum turning diameter 400 mm -Distance between the tips 676 mm AXES: -X axis travel 240 mm (200+40) -Z axis travel 640 mm SPINDLE: -Rotation speed rpm 50-3500 -ASA 8” A2 spindle connection - Internal diameter of the spindle hole 86 mm -Bar passage 77 mm - Self-centering diameter 210/250 mm -Spindle motor power 30 min/continuous kW 25/18

Three axes + revolver turret with twelve driven tools + automation. Turning diameter: 160 mm Turning height: 150 mm Table/pallet diameter: 100 mm Turning power: 19.5 kW Z axis carriage travel: 375 mm Number of tools: 12 Pallets: Yes Length: 7000 mm Width: 3500 mm Height: 3100 mm Weight: 5500 kg

Type designation: Gildemeister CTX 400 S2 Year of manufacture: 1999 Operating hours: 65.655,88 h Control: Heidenhain CNC Pilot 3190/4290 Special equipment: Software update Turn-Plus rapid traverse X/Z: 10m/15m Spindle speed: 25-5000 rpm Turret: Sauter 12-position turret, no driven tools Chuck: Power chuck SMW Autoblock Spindle passage: 0 Turning diameter: approx. 200 mm Turning length: max. 635 mm Tailstock/quill: available and mounted Chip conveyor: Yes, mounted Maschinenmaße: 4527x1940x1730mm Total weight: 5140 kg (incl. chip conveyor)

CNC 18 ITB Diamètre de broche 66 mm Course – x 210 mm Course – z 840 mm Vitesse de tournage 40-5000 1/min Nez de broche JIS A2-6 Diamètre 66 mm Axe C 0,001° Nez de broche 110 mm Tourelle 12 Pos. : FANUC 31iA Turning diameter : 400 mm Distance between centers : 840mm Main spindle chuck : SMW 210mm Sub spindle chuck : SMW 130mm Main spindle bore : 66 mm Turret : 12 post C axis :

CNC turning center with 6-axis Mitsubishi robot arm (robot cell) - Machine can be tested under power Specifications: Manufacturer: Mazak Model: QTG-50 SG Control: Mitsubishi M80 Year of construction: 2019 Properties: oscillation diameter: 470 mm oscillation diameter over Feed size: 100-135 mm rod diameter: 32 mm workpiece weight for shaft parts: 20 kg workpiece weight incl. chuck with suitable clamping force and stiffness of the feed: 20Kg Distance spindle nose - tool holder slide 105 to 340mm Main spindle: speed 7,000 min-¹ Min. speed 35 min-¹ Gearbox gradation Continuously variable Spindle nose H6 flat, 115 mm diameter. spindle passage 45 mm 30 min. rated power 7.5 kW B3lphazt0t TOOL REST: Tool rest type Tool holder slide Number of tools: 6 Tool dimensions (turning tool): 16x16mm Tool dimensions (drilling tool): 20 mm diameter Feed axles Rapid tr ...

Number of axes - Equipment - : - - : 2 MAIN SPINDLE : Spindle power : 15 kW Spindle speeds : 5000 rpm Max. bar diameter : 45 mm Max. machinable length : 560 mm Max. chuck diameter : 220 mm TURRET : Number of positions : 12 X/Z stroke : 170 / 560 [mm] WEIGHT & DIMENSIONS : Machine floor space : 4240 X 2000 [mm] - Machine height : 1900 [mm] - Machine weight : 4200 [kg] CNC : Fanuc 21i-TB Coolant tank : Chips conveyor : Tool probe :

CNC turning machine Brand : CMZ Model : TD 30YS Year : 2020 Max diameter swing over bed : 950 mm Max diameter swing over slides : 715 mm Max. turning diameter : 550 mm Distance between spindle and tailstock center : 800 mm X-axis travel : 380 mm Z-axis travel : 800 mm Fast feedrate X (m/min) : 30 Fast feedrate Z (m/min) : 30 Fast feedrate B (m/min) : 30 Max bar diameter : 82 mm Spindle power (kw) : 40/25 Working hours : 1516 h

Control Fanuc Oi-tf With Manual Guide Maximum Cutting Diameter 280 Mm Bar Capacity 65 Mm Distance Between Spindles 400 Mm Spindle Motor Power 7,5/11kw Spindle Nose A2-6 Spindle Speed 4500 Rpm Sub Spindle Bore 59 Mm Sub Spindle Max Speed 4500 Rpm Turret Positions 12 Station Tool Size 25 X 25 Mm Milling Rpm 5000 Rapid Feedrates Xzya: 24x27x12x30 M/min C Axis 0.001 Degree X Axis Travel 221 Mm Y Axis Travel +50/-50 Mm Z Axis Travel 400 Mm Machine Dimensions 2470 X 1850 X 1930 Mm Machine Weight 5600 Kg Chip Convoyer Tool Probe With Bar Feeder Lns Qls80 S2 Cutting Time 4638 Hours

Emco Emcoturn 332 Mc 2 Spindle Ve Taret C Eksen Cnc Torna Ve Çub 2 Spindle 2 turret C axis Chip conveyor Bar feeder(LNS) Maximum turning diameter :140 mm Maximum workpiece length: 580 mm

GD-12 - electric scheme - user manual - programming with error codes - technical instruction with drawings GLD-12 - electric scheme - technical instruction BAR FEEDER IEMCA SHOP - electric scheme - operating instructions (setting, parameters, errors) BAR FEEDER FMB SHOP - electric scheme - operating instructions (setting, parameters, errors) Additionally - an original cable for connecting a computer to the GD-12 and GLD12 via RS-232, if there is no RS-232 on your computer, you need a USB-RS-232 adapter. PC and machine communication software and all machine parameters. As well as: - user manual; - programming instructions; - electric scheme; - drawings of mechanics. this is the original documentation. a couple more unnecessary books and CNC documentation (this can be downloaded on the Internet in Russian) There are 3 main shops for shops - mechanics, electric ...

GLD-12 - electric scheme - technical instruction BAR FEEDER IEMCA SHOP - electric scheme - operating instructions (setting, parameters, errors) BAR FEEDER FMB SHOP - electric scheme - operating instructions (setting, parameters, errors) Additionally - an original cable for connecting a computer to the GD-12 and GLD12 via RS-232, if there is no RS-232 on your computer, you need a USB-RS-232 adapter. PC and machine communication software and all machine parameters. As well as: - user manual; - programming instructions; - electric scheme; - drawings of mechanics. this is the original documentation. a couple more unnecessary books and CNC documentation (this can be downloaded on the Internet in Russian) There are 3 main shops for shops - mechanics, electrics, instruction manual.

Distance between centers: 6000 mm Height centers: 800 mm Max swing over bed: 1600 mm Max swing over slide: 1225 mm Main spindle hole diam: 150 mm Speed range: 4 Speed ​​range I: 0-90 rpm Speed ​​range II: 0-180 rpm Speed ​​range III: 0-355 rpm Speed ​​range IV: 0-710 rpm Cross slide travel: 830 mm Quill diameter: 320 mm Quill travel: 250 mm Equipped with: Control: Siemens Sinumerik 840 D Shop Turn 4 independent jaw chuck: Ø 1400 mm 4 independent jaw chuck: Ø 560 mm Square Auto Turret: SAUTER 4 pos - Ø 320x320 mm Tailstock and quill: motorized Chip conveyor: Yes 1 steady rest: Ø 100-500 mm 1 steady rest: Ø 500-900 mm

FANUC CNC CAPACITY: -Maximum rotating diameter on the bench 685 mm -Maximum diameter on the carriage 510 mm -Maximum turning diameter 400 mm -Distance between the tips 676 mm AXES: -X axis travel 240 mm (200+40) -Z axis travel 640 mm SPINDLE: -Rotation speed rpm 50-3500 -ASA 8” A2 spindle connection - Internal diameter of the spindle hole 86 mm -Bar passage 77 mm - Self-centering diameter 210/250 mm -Spindle motor power 30 min/continuous kW 25/18

Goodway Model GLS 2000 Motorized Lathe, Complete with hand piece unloading, bar feeder interface and Iemca loader mod. Boss 552 HD 3 meters Machine in operation at our customers site, machine in excellent condition Government Unit: Fanuc OI Maximum Workable Length 1 Capacity: 500 mm Turning diameter: 310 mm Bar passage: 51 mm Spindle holder: ASA 6 Main Spindle Spindle Speed: 4200 rpm Turning Spindle Power: 15 Kw Motorized speed: 4000 rpm Motorized power: 3.7 Kw Chip conveyor: Yes on the whole

Machine also is fitted with: -Span conveyor ; -Cooling device; -Fairing for cooling device. Last edition CNC Fanuc equipment. Delivery time: 2 months. Please send request for more technical details, price and photos. Machine can be seen in our workshop anytime.

In perfect condition. two axes. Worked very little. Most of the time he stood. 2011 release. The control stand is practically new: no scratches or scuffs. Absolutely everything works. Accuracy 1 weave. The guides are not worn. The beating of a lathe chuck (diameter 250 mm) on zeros. Advanced release: spindle speed up to 3000 rpm, automatic tool change (4 positions). Heavy cast bed. Pistol blowing system. There are handles for manual turning if desired (according to the indicators on the scoreboard), which is very convenient when tying or grinding something quickly and piece by piece. Spindle bore diameter Ø 76 mm Turning diameter over support 282 mm. Distance between centers 1219 mm. You can come turn it on and see how everything works. Check accuracy. For sale due to the need to purchase an expensive CNC milling machine. When buying, we will teach you how to work, we will sh ...

Description: Fabrication number: R3GL9012 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 27 A Control unit: FANUC SERIES 21-T Turning length: approx. 500 mm Travel distances: Z: approx. 300 mm X: approx. 300 mm Incl. 10-position tool turret Attention: the tool holders in the tool turret are not included in the scope of delivery Tool holder: VDI 30 Incl. bar loader from the manufacturer KUPA Type: 42R weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,400 x 1,900 mm

Description: Fabrication number: R2EV3202 Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 33 A Control system: SIEMENS SINUMERIK Turning length: approx. 500 mm Travel distances: Z: approx. 400 mm X: approx. 400 mm Incl. a 12-position tool turret with driven tool stations The machine has a C-axis Attention: the machine is delivered without any visible tool holders Tool holder: VDI 30 weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,700 x 1,900 mm

Description: Factory number: R6ET1802 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 38 A Control: SIEMENS SINUMERIK Turning length: approx. 1000 mm Travel: X: approx. 400 mm Z: approx. 600 mm The machine is equipped with a tailstock and a two-jaw chuck from the manufacturer SCHUNK (diameter: 250 mm) Attention: without the tool holders on the tool turret Incl. chip conveyor Tool holder: VDI 30 weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,000 x 2,000 mm

Features BIGLIA B501S Complete with TS560 magazine Bar passage 54 mm Maximum workable diameter for shooting 250 mm Maximum workable length 500 mm Maximum rotating diameter 520 mm Main spindle Rotation range from 40 to 4000 RPM Spindle nose Asa five Spindle hole 52 mm Bearing internal diameter 80 mm Self-centering diameter 165 mm Motor power 5.5 to 7.5 kW Turret Number of positions 12 Bidirectional type Tool shank external internal diameter 25 × 25 diameter 32 mm Racing aces X axis travel 210 mm Z axis travel 500 mm B axis travel 510 mm

PUMA TT1800SY Upper Driven Head with Y Axis, Lower Driven Head, Dual Spindles. FANUC 31i-B control system. Max. circulating diameter above the bed 300mm. Max. circulating diameter above support 230mm. Max. turning diameter above bed with upper head 230mm. Max. turning diameter above bed with lower head 230mm. Max. turning length 600mm. Max. distance between the face of the right and the face of the left spindle 980mm. Milling range outside the turning axis using the Y axis mm 100 (+/- 50). Max. diameter of turned bar (left spindle) 65mm. Max. diameter of turned bar (right spindle) 65mm. Max. permissible weight of the workpiece without the use of a counterspindle (including the weight of the chuck = 23 kg) 12 kg. Total weight 7800kg. Accessories: Feeder SS 2500, length 200-1525mm. Standard accessories. The machine is in good technical condition, it is necessary to seal the upper machining ...