cnc lathe used for sale

Software: Eltro Pilot, controls: Heidenhain Turn Plus (EP90) 1190 V4.6, spindle hours counter: 45,288h, including accessories. Pictures upon request.

Center distance: 1500mm, rotational speed: 3-2800/min, max. swing over bed/ slide: 500/ 290mm, controls: Monforts Control-System K, weight: 3.3t, with accessories, without tools.

With accessories, documentation and Bar Loader FMV turbo ET 420, available in the third quarter of 2023.

Length: 2580mm, width: 2115mm, height: 1780mm, weight: 2.6t, with accessories, documentation and Bar Loader FMB turbo ET 420, there is another identical machine available as a source for spare parts.

Turning length: 3000mm, center height: 392mm, swing over bed/ slide: 800/ 490mm, rotational speed: 1500-6000/min, tailstock diameter: 100mm, controls: FAGOR 800 T, with documentation, three-jaw chuck 400mm, with change jaws, four-jaw plate face 500mm, Multifix change holder, fixed bezel.

Controls: Fanuc 32iTB, operational hours counter: 3527h.

Number of tool places: 12, controls: Fanuc 32iTB, operating hours: 3611h, with bar feeder IRCO Breuning MUK 7012, standard equipment for TA series: interpolating and bidirectional compensation of mechanical errors by laser measurement, main spindle: oil-cooled main spindle unit, foot pedal for opening and closing the chuck, load indicator for main spindle motor, safety device against chuck opening in case of hydraulic pressure drop.

Jessey Jaguar 2080 Ø 510 x 2000 mm CNC Swing over bed: 510 mm Swing over cross-slide: 340 mm Distance centre tot centre: 2000 mm Spindle cone: A2-8 Dia of spindle bore: 80 mm Power on the spindle: 11 kW Number of speeds: 12 > 1800 rpm Command: Fagor Length: 4060 mm Width: 1420 mm Height: 1600 mm Weight: 4 ton

Hollow spindle opening diameter: 42mm, rotational speed: 56-5600/min, controls: SYSTEM TX 8F, length: 2498mm, width: 1990mm, height: 2005mm, weight: 3.8t, operational hours: 38,274h, with driven tools, various tool holders VDI30, high pressure pump, the Drive Baumüller BUH-4-55-6-002 shows an error message and has to be overhauled.

Swing ober bed/ support: 400/ 245mm, Drehlänge: 1385mm, Spitzenweite: 2370mm, Steuerung: Fanuc Series 210i-T Anschlussleistung: 11kW, Länge: 3100mm, Breite: 1700mm, Höhe: 1600mm, Gewicht: 3,1t, mit Ersatzteilen.

Spindle power: 3.7/7.5kW, max. rotational speed: 5000/min, controls: Fanuc Series 0i-TF, length: 2560mm, width: 2512mm, height: 2145mm, weight: 4.3t, operational hours counter: 8923h, with documentation.

Main spindle opening: 30mm, clamping chuck: DIN 177E, number of tool slots: 12, controls: GE Fanuc Series 0-T, with Bar Loader IEMCA.

Length: 2700mm, width: 1900mm, height: 1900mm, weight: 2.5t, with Bar Loader FMB Turbo 8-80/320/A, year of construction: 2007, Chip Conveyor Knoll, documentation and Extraction Sartorius, was maintained regularly.

Used multi-spindle machine INDEX MS36E built in 1996 including a lot of accessories (collets, synchronizer guns, interchangeable wheels, various working curves, etc.) The plant is virtually ready for dispatch, in a dismantled state for inspection. For photos, technical data and a list of accessories, see Appendices. It has no major defects, is basically ready for operation, only the rubber hoses should be changed before commissioning and the coolant-lubricant system should be thoroughly cleaned and rinsed throughout. Accessory listing MS36E Iemca Loading Magazine Oil filter system (+3 rolls of filter paper) Collets Synchronizer Clamps (sentences) Ø 24 Ø 16 Ø 26 Ø 20 Ø 27 2x Ø 23 Ø 28 2x Ø 26 Ø 30,5 2x Ø 27,5 Ø 31 Ø 32 div. jaws Ø 33 for 3-jaw chuck Ø 34 Ø 36 SW 24 1x spindle stop (currently layer 4) 3 sets of rod guide tubes Various reductions f ...

Connected load: 44kVA, length: 3185mm, width: 1700mm, height: 1700mm, weight: 4.3t, spindle hours: 83,000h, with documentation and short bar feeder MULTIFEED, the bar feeder is not functional, the lathe has been serviced regularly.

Length: 2100mm, width: 1350mm, height: 1800mm, weight: 2.5t, the machine should be overhauled, an inspection is possible.

Center distance: 1500mm, max. rotational speed: 2500/min, spindle opening: 77mm, chuck diameter: 250mm, swing over bed/ slide: 510/330mm, controls: Siemens SINUMERIK 805, connected load: 20kW, weight: 3t, with stainless steel tab, steel holder and tool cone, an inspection is possible.

Spindle diameter: 30mm, rotationalspeed: 7500rpm, with chip conveyor and base holder. Control: Siemens Sinumerik 840 C, length: 3210mm, width: 2084mm, height: 2214mm, weight: 3.2t. Line pressure: 210bar, injection force: 182kN, clamping force: 1000kN, opening stroke: 0-400mm, mold installation height: 450-750mm. An on-site inspection is possible.

Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.

Length: 2600mm, width: 1700mm, height: 1800mm, connected load: approx. 12.5kW, on-site inspection is possible.

X-travel: 195mm, y-travel: 85mm, z-travel: 405mm, controls: GE Fanuc Series 21i-TB, weight: 6.3t, including 1x jaw chuck, 2x driven tool for face machining, 3x driven tool for cross machining, 7x internal drilling holders, 9x turning holders, with documentation, on-site inspection is possible, the machine is defective and needs to be overhauled, the turret no longer moves.

Turning length: 250mm, center height: 240mm, swing/ over slide: 280/ 185mm, operational hours counter: 55,325h, with documentation, without tools, was maintained regularly, an inspection is possible.

Connected load: 58.5kVA, operational hours counter: 50,559h, with documentation, without tools, was maintained regularly, an inspection is possible.

Spindle opening: 2x 65mm, turning diameter: 230mm, turning length: 673mm, turning chuck diameter: 210mm, max. rotational speed: 5000/min, spindle power: 11kW, controls: FANUC Series 31i-MODEL B, connected load: 60kVA, weight: 8.5t, operational hours counter: 9860h, with documentation, accessories, various tools, clamping devices and bar loader, without robot, was maintained regularly, an inspection is possible.

Swing ober bed/ slide: 600/ 360mm, center height: 350mm, bed width: 450mm, width: 2050mm, height: 2000mm, weight: 7,4t, including documentation, various tool holders, two stands, base jaws, counter tips and various spare parts.

X-travel: 520mm, z-travel: 200mm, circumferential diameter: 325mm, spindle bore: 60mm, rapid traverse: 30m/min, number of tool positions: 25, control: Index C200-4, including three-jaw chuck, pallet circulation system, coolant tank, scraper belt conveyor, tool holder and documentation, on-site inspection is possible.

Control: Heidenhain DMG plus, connected load: 44kVA, length: 8000mm, width: 2500mm, height: 2000mm, weight: 6t, with accessories, on-site inspection is possible.

Turning diameter cross slide/bed: 170mm/400mm, turning length: 550mm, spindle bore: 42mm, bar length: 3200mm. Tool turret: 12-position turret, control: TX8F, loading magazine: LNS Hydrobar, spindle hours: 30707. Including chip conveyor, tailstock (not in use). Available from May, 2024.

Converted to CNC in 2002, control: Siemens 840D, footprint X/Y: approx. 6000mm/8000mm, max. speed: 2000rpm, interference circle turning diameter: 1800mm. Including: Tool changer with 12 tools. Documentation available.

Max. speed range: 5000 rpm, bar capacity: 65 mm, max. turning diameter: 200 mm, max. turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14, Siemens control. Including outfeed conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), switch cabinet with cooling unit, CO2 extinguishing system and INDEX bar loader. General overhaul in 2016.

Max. turning diameter: 200mm, max. turning length: 400mm, spindle speed: 6000rpm, bar capacity: 42mm, weight: approx. 4300kg.

Okuma Twin-Star LT300 MY with 2 equivalent main spindles and tool turrets (2x12) Speed range: 38-3,800 rpm. Torque: 420 Nm with CNC control Okuma OSP-P200L with tool monitoring system for tool life and breakage with control expansion kit One-Touch-IGF-M-D Gravity Belt Filter SPB4 Coolant pump 20 bar, 40 l/min. 2 x Kitagawa B208 power clamping device Full clamping cylinder programmable right + left Y-axis with stroke for driven WZ stations Interface + servo drive integrated for loading portal Loading portal MIDI diam. 200 x 150 mm Pallet stacking magazine PSM 100/20 Workpiece shuttle, stacking table extension Connection nozzle for air filter (preparation) Turning diameter 350 mm (550 mm above bed) Speed range: 38-3,800 rpm. Torque: 420 Nm Year of construction 07/2011 Operating hours: 25,871 h / Spindle running time: 24,773 h At the end of last year, almost € 6 ...

Turning diameter: 430 mm Turning length: 1335 mm Turret positions: 12 CNC Brand: _Unknown / Other CNC Model: 532 CNC Max. turning Ø:430mm X-Axis:        320mm Z-Axis:        1335mm Spindle bore:  94mm Speedrange:    2500Rpm Spindle power: 53kW ATC / revolver:12 Vdi-40 Pinole taper:  4Mk Stroke pinole: 1500mm Quill Ø:       100mm Length:        7005mm Width:         2600mm Height:        2200mm Weight:        9500kg

Including chipconveyor Swing over bed: 630 mm Distance centre tot centre: 1000 mm Max longitudinal travel Z-axis: 500 mm Max cross travel X-axis: 320 mm Dia of spindle bore: 92 mm Power on the spindle: 17 kW Number of speeds: 2 > 3000 rpm Command: Siemens Sinumerik 810D Total power needed: 52 kVa Length: 5500 mm Width: 2200 mm Height: 2100 mm Weight: 6,6 ton Toolchanger: yes Number of tools: 12 positions

min/max diameter: 6 gt; 120 mm min bar stock length: 130 mm max bar stock length: 1600 mm max bar stock weight: 67 kg pushing force: 167 Nm loading cycle for bar stock: 8 gt; 12 sec loading cycle for shaft loading: 4 gt; 7 sec Length: 2048 mm Width: 1486 mm Height: 1400 mm Weight: 600 kg

WE SELL GREAT CONDITION BIGLIA EQUIPPED WITH COMPLETE TOOLS AND ACCESSORIES , BAR FEEDER LNS MACHINE HAS RUN ONLY 606 HOURS AND IT COMES WITH COMPLETE DOCUMENTATION AND ACCESSORIESS WE ORGANIZE DISMANTLING AND LOADING. FOR CUSTOMER WE CAN ORGANIZE AS WELL TRANSPORT .

Ref. -No.: 10367 Manufacturer: WEILER Year of construction: 1996 Type of control: CNC Control: Siemens Storage location: Halberstadt Country of origin: Germany Turning Speeds: 500 RPM Machine length: 7000 mm Machine width: 2300 mm Machine Height: 2600 mm Weight Of The Machine Ca.: 9,25 t Spindle Taper: 6 Mk Travel quill: 300 mm Bed width: 800 mm Turning Length: 3000 mm Turning Diameter Over Bed: 900 mm Swing Diameter Over Bed Slide: 530 mm Spindle Bore: 254 mm Spindle power: 45 kW Tailstock - Insertione Into The Sleeve: 140 Ø Max. Workpiece Weight: 5000 kg Further information: Machine can be inspected under power.

Ref. -No.: 10364 Manufacturer: MAZAK Year of construction: 1997 Type of control: CNC Control: MAZATROL T PLUS Storage location: Halberstadt Country of origin: Japan Machine length: 6365 mm Machine width: 3180 mm Machine Height: 2800 mm Weight Of The Machine Ca.: 7 t Bar passage: 64 mm Max rotation diameter: 510 mm Turning Diameter: 400 mm Turning Length: 1539 mm Spindle power: 22-26 kW Spindle Speed Min.: 35 RPM Spindle Speed Max.: 3500 RPM Rapid Travel Speed X-Axis: 12 m / min Rapid Travel Speed Y-Axis: 10 m / min Rapid Travel Speed Z-Axis: 18 m / min Motor power milling spindle: 7,5 kW Max. speed milling head: 15-6000 RPM X-axis travel: 450 mm Y-axis travel: +/- 90 mm Z-axis travel: 1539 mm Number of tools in the chain magazine: 40 (15 + 25) POS Further information: The main spindle was replaced with a new one in Oktober 2019. In the course of this, small spare parts were renewed or r ...

Ref. -No.: 10294 Manufacturer: SCHNEIDER WERKZEUGMASCHINEN Year of construction: 1983 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 27.0175 Weight Of The Machine Ca.: 4 t Turret places: 8 Pcs Turning Diameter: 595 mm Turning Length: 3000 mm Bezel diameter (inside): 240 - 490 mm Further information: Tool turret, with 8 holders, with chip conveyor, approx. 300 mm wide, Belt filter system Mayfran, 2 bezels, 1 x for diam. up to 240 mm, 1 x for diam. until about 490 mm

Ref. -No.: 10154 Manufacturer: HEYLIGENSTAEDT Year of construction: 2014 Retrofit: 2015 Type of control: CNC Control: SINUMERIK 840D solution line Storage location: Halberstadt Country of origin: Deutschland Bed width: 2000 mm Feed rate: 1-5000 mm / min Turning Diameter: 2600 mm Turning Length: 10000 mm Centre Distance: 11500 mm Faceplate Diameter: 2000 mm Spindle Speeds: 0,5 - 36 min-1/20 - 140 min-1 RPM Max. Torque: 120 Nm Max. Workpiece Weight: 40000 - 70000 kg Total Power Requirement: 230 kW Cross slide shift (X-axis): 640 mm Further information:

Ref. -No.: 10036 Manufacturer: JOHNFORD Year of construction: 2009 Type of control: CNC Control: Fanuc Series 18i-TB Storage location: Halberstadt Country of origin: Taiwan Machine length: 9800 mm Machine width: 3695 mm Machine Height: 5292 mm Weight Of The Machine Ca.: 32,6 t amount of positions: 12 Bar passage: 165 mm Serial no.: TDF9007 Turning Length: 2000 mm Turning Diameter Over Bed: 1550 mm Swing Diameter Over Bed Slide: 1270 mm Longitudinal Travel (Z-Axis): 2000 mm Spindle Head: A2-15 Spindle Diameter In Front Bearing: 240 mm Spindle Bore: 185 mm Spindle power: 37/30 kW Cross Travel: 685 mm Spindle Speeds: 1000 RPM Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 12 m / min Tool changer: 12 Pcs

Multi-spindle lathe (8 spindles) max. rod diameter 16 mm Guide tubes 4,000 mm Conveyor

CNC multi spindle bar automatic, Gildemeister GMC 35 ISM, - 6 integretat spidles with C-axis, - 5 compound slides pos. 1; 2; 3, 4; 5;, - intipendend feed for central block, - douple slide in pos. 6, - pick-up spindle in pos. 6, - 5 frontal spindles, rotating, with internal coolant supply, ISO 40, - swarf conveyor, - Fire fihthing system CO2, - ARTIS tool breakage control system, Stangenlademagazin :, Cucchi Pietro PB 41 Compact, Country of origin: Italy, Control: Siemens 840D, Operating hours: 56.000, Number of spindles: 6, Max bar diameter [mm]: 35, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 21, Total power requirement [kVA]: 107, Auto bar loader: Cucchi Pietro PB 41 Compact

Tool holder, tool holder, tool holder, axial tool holder -Rotating tool: 27 mm -Number: 9x shots -Price: per piece -Dimensions: 73/67/H197 mm -Weight: 4.7 kg

turning diameter: 850 mm turning length: 6100 mm control: Siemens type: 840 D turning diameter over slide: 570 mm Tool changer: 12 Pos turning speeds: U/min chip conveyor: 3-jaw-chuck diameter: 600 mm total power requirement: kW weight of the machine ca.: 17 t dimensions of the machine ca.: 12x2x2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Work piece maximum diameter: 8500 mm; - Distance between columns: 8500 mm; - Work piece maximum diameter through gantry travel: 11000 mm; - Work piece maximum height: 6000 mm; - Work piece maximum weight on faceplate: 100 tons; Table-Faceplate - Diameter: 6000 mm; - Speeds range (continuously variable): 0-50 rpm; - 4 x 40 kW main motor FANUC make: 160 kW; Fixed table - Dimensions: 3x2000x6000 mm; Gantry - Horizontal travel Y axis: 11800 mm; - Feeds range (continuously variable): 10000 mm/min; Cross rail - Vertical travel W axis: 5200 mm; - Feed range (continuously variable): 0 ÷ 250 mm/min; - Feed motor power: 50 kW; Vertical Rail Head (turning and milling operations) - Vertical ram travel (Z axis): 2700 mm; - Rapid feed speed for Z axis: 10000 mm/min; - Ram cross section: 450x450 mm; - Milling motor power: 40 kW; - Millin ...

Citizen E25J CNC Swiss Type Lathe in very good condition Iemca mini boss 325 bar feeder 4 pieces live tools 10 pieces tool holder

working hours - 9,500 hours This is a turning center with a counterspindle. Excellent condition, mostly turned aluminum only. Circulating diameter above the bed: 600 mm Spindle drilling: 78 mm Chuck diameter: 210 mm Circulating diameter above cross bed:: 355 mm Max. machining diameter / Max. machining length: : 310 / 500 mm Rod Capacity - Main/Counter - Diameter:: 65/45 mm

Max. Turning Dia. 100mm Max. Bar Working Dia. 65mm Max. Turning Length 230mm Collet Chuck Type KK6-185E60B Spindle Nose A2-6 Spindle Bore 66mm Max. RPM. 6000rpm Sub-spindle Capacity Max. Turning Dia. 100mm Max. Bar Working Dia. 30mm Max. Turning Length 100mm Collet Chuck Type KK5-173E42B Spindle Nose A2-5 Spindle Bore 31mm Max. RPM. 6000rpm C Axis Least Command Unit 0.001° Positioning Accuracy 0.02° Travel&Feed X1/Y1/Z1 axis 150 / 410 / 250mm X2/Y2/Z2 axis 450 / 380 / 300mm Rapid Feed 30m/min Repeated Positioning Accuracy 0.005mm Motor Main-Spindle Servo Spindle 11.0kw Sub-Spindle Servo Spindle 3.7kw X1/Y1/Z1 axis AC Servo 1.5k X2/Y2/Z2 axis AC Servo 1.5k Motorized Tool AC Servo 1.5k A.T.C System OD/ID Tools Main Spindle 6 / 5 OD/ID Tools Sub Spindle 5 / 9 Tool Shank Size □ 20mm Drill Holder Size (Main) ER-20 / Ø20mm