cnc lathe sinumerik used for sale

Jesco JAGUAR 2260 — a CNC lathe machine. Type of machine: CNC turning lathe Specifications: - Manufacturer: Jesco Machinery Ltd. - Model: JAGUAR 2260 - Swing over bed: 560 mm - Centre height: 280 mm - Max turning length (distance between centres): 1500 mm - Spindle bore: 80 mm - Control unit: FAGOR 8060 - Country of origin: Taiwan The machine is in very good condition and has been used very little. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Center height: 210mm, distance between centers: 1500mm, swing over bed: 420mm, spindle bore: 57mm, speed range: 38–2000/min, main drive: 7.5kW, weight: 2t. Equipment: 3-jaw chuck, tailstock, steady rest, quick-change tool holder, coolant system, lighting, year of manufacture: approx. 1980–1985. No data sheet, fully functional, well maintained, ready for immediate use. Only slight oil moisture in the lower area due to age, without relevant oil loss. An on-site inspection is possible.

Swing diameter over bed/cross slide: 700mm/430mm, turning length: 4000mm, spindle bore: 80mm, speed: 1500rpm, bed width: approx. 550mm. Machine dimensions X/Y/Z: approx. 6300mm/1350mm/2000mm, weight: approx. 5700kg. An on-site inspection is possible.

turning diameter: 830 mm swing diameter: 920 mm turning height: 750 mm control: Fanuc 0i-TF travel -x axis: 495 mm travel -z axis: 780 mm turning speed range - spindle: 1940 U/min drive capacity - spindle motor: 37 / 30 kW chucking diameter: 380 mm turret (x-stations): 12 pos rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 20 m/min feed: mm/min spindle diameter in front bearing: 160 mm c-axis: 360° (in 0,001°) workpiece weight: 870 kg total power requirement: 61,78 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.: 2,1 x 2,7 x 3,6 m - Control unit FANUC 0i-TF - Tool Turret 12-fold - Coolant system - Foot switch - Automatic safety switch Front door & full enclosure - Work area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal lathe, little used Model: SN 710S x 1500 Make TRENS SK Accessories: Digital Display 4 Jaws Face Plate Coolant tank

Manufacturer: Pinacho Model: Smart Turn 6/180 Power: 7.5 kW Frequency: 50 Hz Control: FANUC CAPACITY • Center height: 180 mm • Center width: 750–1000 mm • Permissible diameter over bed: 360 mm • Permissible diameter over longitudinal slide: 335 mm • Permissible diameter over cross slide: 198 mm • Bed width: 250 mm SPINDLE • Spindle bore: 42 mm • Spindle nose: CAMLOCK no. 5 (DIN 55027 no. 5) • Spindle taper: Morse taper no. 4 • Number of spindle speeds: 1 • Cutting speed (constant surface speed): 0–4000 U/min FEED • Working feed Z,X (mm/min): 0–10000 mm/min • Rapid traverse Z,X (m/min): 10 m/min TAILSTOCK • Tailstock quill diameter: 58 mm • Tailstock quill travel: 200 mm • Tailstock taper: Morse taper no. 3 MOTORS • Main motor power: 5.5 kW • Feed force longitudinal (N): 4500 N • Feed force cross (N): 3500 N • Cool ...

faceplate diameter: 6300 mm swing diameter: 7000 mm turning height: mm ram adjustment: mm cross rail adjustment - vertical: mm ram head - cross travel: mm ram swivable +/-: ° main drive: kW table revolutions:: 0 - 14 U/mn workpiece weight: 75 /125 t ram head dimension: mm total power requirement: 170 kW weight of the machine ca.: 120 t dimensions of the machine ca.: 10 x 10 x 7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 375 mm turning diameter over bed: 1030 mm turning length: 1750 mm spindle bore: 375 mm max. turning diameter: 650 mm spindle turning speed range: 5- 500 U/min spindle motor: 45 / 37 kW Control: OSP P300 L x-travel: +330 / -140 mm z-travel: 2040 mm rapid traverse x + z axis: 5 / 10 m/min tail stock: tailstock quill diameter: 180 mm tailstock quill stroke: 200 mm taper in tailstock MT: MT 6 total power requirement: kW weight of the machine ca.: ca 23 t dimensions of the machine ca.: 7,1 x 3,2 x 2,85 m Cnc Oil Country Lathe CNC-controlled oilfield lathe For heavy-duty machining of large and heavy turned parts and pipe end machining - CNC Control OSP P300L - Front and Rear CHUCK: SMW Autoblok 3 - jaw Chucks (both 850mm dia.) - Tool Revolver 12-fold (static Tools) - Chip Conveyor - Exhauster Power on: 20.538h , N/C Running Time: 2.270h Spindle Revolution Time: 2.287h, Cuttin ...

Key data: 900 mm, 5000 mm

Sony Digital read out 2 axis Taper Turning attachment Steady rest 4 pcs 3 jaw chuck selfcentering 4 jaw chuck independent Coolant system

Spindle bore: 42mm, max. workpiece diameter: 115mm, speed: 3150rpm, power: 9kW, bar length: 5200mm. Machine dimensions X/Y: approx. 2100mm/1000mm, weight: approx. 1500kg. Including bar feeder Stamag D 5000 and various accessories such as collets and feed collets. Documentation available. An on site inspection is possible.

CNC vertical lathe Type: SKJ 12 NC Manufacturer: TOS Modernization: 2002 Control: Mefi CNC 856 Max workpiece diameter: 1400 mm Clamping plate diameter: 1250 mm Maximum workpiece height: 1150 mm Maximum workpiece weight: 6000 kg Clamping plate speed: 2.5 - 225 rpm Main motor power: 37 kW Machine weight: 13000 kg In good condition, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines

Lathe SARO SP 1250x3000, working condition

turning diameter: 270 mm turning length: 630 mm control: SIN840D swing over bed: 400 mm swing diameter over slide rest: 220 mm longitudinal slide -travel: 745 mm cross slide - travel: 200 mm turning speeds: 10 - 4.000 U/min power capacity at 100 % load: 15,00 kW spindle head DIN 55026 - Size: 6 spindle bore: 62 mm chucking diameter: max. 315 mm feed x-axis: 1 - 12.000 mm/min rapid traverse X-axis: 12,00 m/min Feed z- axis: 1 - 20.000 mm / min. rapid traverse Z-axis: 20,00 m/min tailstock quill taper MT: 3 quill stroke: 112 mm quill pressure: 10,00 kN tool turret with 12 work positions: tool taper DIN 69880: Ø 30 mm Tool drive speed max.: 4.000 1/min total power requirement: 37,00 kW weight of the machine ca.: 4,00 t dimensions of the machine ca.: 4,00 x 2,75 x 2,30 m With SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool hol ...

Dimensions (L/W/H): 2150x480x1330 mm Weight: 230 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1230x490x2120 mm Weight: 200 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1600x330x420 mm Weight: 130 kg Total power requirement: 1,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2150x480x1330 mm Weight: 230 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2150x480x1330 mm Weight: 220 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2150x480x1330 mm Weight: 220 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SEDIN 1512 vertical lathe YOM 1987 Table diameter 1120 mm Max. turning diameter 1250 mm Max. workpiece height 1000 mm Max. workpiece weight: - 3200 mm (5…80 rpm) - 1000 mm (250 rpm) Main motor power 30 kW Installed power 37 kW Dimensions L/W/H 2750/2975/4100 mm Weight 16000 kg

faceplate diameter: 2950 mm swing diameter: 3200 mm turning height: 3500 mm table load: 20 t feed range: 3000 mm/min main drive motor: 70 kW milling drive: 16,1 kW Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control FAGOR 8070 C-axis with 360,000 positions Milling head Inspection under power in the factory possible. Machine location is Spain. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working diameter: 140 mm turning diameter: 185 mm workpiece length: 120 mm control: Siemens turning speeds: 7.000 U/min Vertical Turning Machine | FAMAR - BISUB 160 2G The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: BISUB1602G | BISUB160 2G | BISUB-160 2G The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 1400 mm control: Siemens 840D travel -x axis: -80 / +1100 mm travel -z axis: 1060 mm workpiece height max.: 1400 mm max. workpiece weight: 8000 kg Shank diameter: 200 x 240 mm table turning speeds: 2- 400 U/min drive capacity - spindle motor: 44 kW max. torque on the faceplate: 14510 Nm rapid traverse: 12 m/min turning speed range - milling: 0,01 - 7,4 U/min speeds of tool: 4 - 3000 U/min work piece power: 22 kW Torque: 840 Nm total power requirement: 90 kVA weight of the machine ca.: t dimensions of the machine ca.: m equipped with: - CNC control Siemens 840Dsl - C-axis - driven tools - tool changer 12-fold (driven tools) - complete enclosure - chip conveyor - coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement.

Description Labor-E 275 Details Type 275 Year of manufacture 1997 Machine no. 9711848 FAGOR CNC 850T control Tip height above bed 275 mm Center width 3,000 mm Footprint 5,050 x 1,800 x 1,430 mm Circumferential diameter over bed 550 mm Circumferential diameter over carriage 340 mm Spindle nose 8" Spindle bore 103 mm Main spindle motor 11.5 kW Z-axis motor 1.4 kW X-axis motor 0.7 kW Quill feed 220 mm Quill diameter 100 mm incl. documentation SPECIAL PRICE

General Manufacturer: Citizen Type: Cincom R 07 VI Year of Make: 2012 Control: Citizen Cincom Number of axles: 6 Turning diameter: 7 mm Turning length: 40 mm Thread diameter: 4 m Spindle passage: 12 mm Spindle Speed: 0 – 16,000 rpm Spindle power: 1.1 kW Sub-spindle Speed: 0 – 10,000 rpm Pick-up length: 40 mm C-axis: 1° Tapping diameter: 3 m Tool Carrier Quantity: 2 Number of stations: 13 Turning tools: 5 Drilling tools: 4 Tool shank cross-section: 8 mm Counter-processing Number of tools: 4 Drive Connection 50 Hz 3x: 400 Volts Sub-spindle power: 0.5 kW Total power requirement: 4 kVA Dimensions and weight Dimensions: 1,465 mm x 560 mm x 1,410 mm Weight: approx. 950 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Pneumatic workpiece extraction LNS Tryton 112 Rother mini ...

Manufacturer: INDEX Model: MS42C Year of Manufacture: 1998 ( Machine 1 ) 2002 (machine2 ) Machine 1 : Power supply: 3-phase / 50 Hz Rated voltage: 400 V Control voltage: 24 V Rated current: 125 A Rated power: 69 kW Electrical cabinet weight: 1500 kg Machine weight: 11000 kg Machine 2 : Power supply: 3-phase / 50 Hz Rated voltage: 400 V Control voltage: 24 V Rated current: 100 A Rated power: 72 kW Electrical cabinet weight: 1500 kg Machine weight: 11000 kg Working area Maximum bar diameter (bar feed, external): 42 mm Bar feed positions: spindle positions no. 1, 3, 4, 6 Spindle circle diameter: 320 mm Main spindle (turning spindle) Clamping system: Power clamping with INDEX spring-loaded hollow clamping cylinder and draw tube Maximum clamping stroke: 4 mm Clamping force: 26 kN Drives Main spindle drive (per spindle): Motor type: Variable-speed hollow-shaf ...

Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T

A conventional universal lathe Bulmak with gap bed (gap-bed lathe) is available. Center height: 210mm, turning diameter over bed/cross slide/in gap: 440mm/230mm/620mm, distance between centers: 1000mm, spindle speed: 2000rpm, bed width: 360mm, travel X/Z: 250mm/130mm. Machine dimensions X/Y/Z: approx. 3100mm/1300mm/1400mm, weight: approx. 2500kg. The machine is partially defective. On-site inspection is possible.

An untested conventional turret lathe WMW with extensive accessories is available. Machine dimensions X/Y/Z: approx. 2500mm/1600mm/1200mm, weight: approx. 2000kg. An on-site inspection is possible.

The new Hans Schreiner infinitely variable turning lathe with leading spindle and feed rod and cross feed. Hardened and cut bed and gear wheels. Main spindle, tapered roller bearings and v-ledges. Camlock mount C4, top slide ratatable by 360°, tailstock adjustment +/- 5 mm for taper turning. Good metal-cutting performance, infinitely variable speed via electronic speed control with digital speed indicator. Incl. three-jaw chuck 160 mm and steady rest. Technical data: Center height 140mm Distance between centers 650 mm max. turning diameter 289 mm Spindle bore 38 mm Spindle cone MK 5 Clamping cone tailstock MK 3 Spindle speeds 50 - 1125 RPM and 100 to 2250 RPM Speeds 2 Main motor power 1,5 kW S6 Voltage 230 Volt Weight 230 kg Standard equipment: 3-jaw chuck 160 mm with changeable jaws for internal turning center point Optional equipment: 2 axis digita ...

Metal lathe Mammut CD6250B, good condition, built in 2006, standard equipment, 6 kW, 1500 mm center width, 250 mm center height, 2000 kgPrices subject to change, errors, printing and typesetting errors excepted

Lathe Hans Schreiner MDB-S900, YOC 2015, good condition, 1.5 kW , 900 mm center height, 165 mm center height, 65-1810 rpm, 500 kgPrices subject to change, errors, printing and typesetting errors excepted

The new professional turning lathe by Holzprofi Maker stands out due to its precise workmanship, stepless speed and left/right-turning. Cast iron drive unit and bed. Motor is splashprooved for wet wood turning. The tailstock has quick adjustment, the headstock has a hollow spindle with Mk 2 mount also in the tailstock. 36 pitch with latching. Standard equipment: quick adjustable tailstock rest grab chuck face plate live center Technical data: Distance between centers 1000 mm Center height 254 mm Tail stock thread M33 Din 800 Motor power 2,25 kW, S1 Speeds variable 100-1350 100-3550 rpm Voltage 230 V Weight 240 kg Optional: Outturning extension (increases the center height by approx. 220 mm or lengthens the center distance by approx. 460 mm)

The new small professional turning lathe by Holzprofi Maker stands out due to its precise workmanship, stepless speed and left/right-turning. Cast iron drive unit and bed. Motor is splashprooved for wet wood turning. Standard equipment: quick adjustable tailstock rest grab chuck face plate live center Technical data: Distance between centers 640 mm Dist between centers with opt. extension 1120 mm Center height 204 mm Tail stock thread M33 Din 800 Motor power 2,2 kW, S6 Speeds variable 100-1200 100-3200 rpm Voltage 230 V Weight 135 kg

Precision full gear, lead, pull, shift spindle lathe, bed and gear gears hardened and ground. Main spindle, tapered roller bearings and wedge bars plan/upper slide can be adjusted. Camlock mount C5, upper slide 360 rotatable. Tailstock adjustment +/- 5 mm for taper turning,High clamping capacity, DIN acceptance protocol, operating and spare parts list.Dial rings metricWith 3-axis Sino digital display and removable bedStandard equipment:Sino 3-axis digital displayTool Quick-change holder E

Hans Schreiner Metal LatheSuperut 1500 DigitalTechnical data:Center height 250 mm, center width 1500 mm, max. turning diameter 500 mm, spindle mount Camlock 8, hollow spindle 80 mm, tailstock cone MK5, spindle speed 24 to 1600 rpm, speeds 15, main motor output power 7.5 kW, max. diameter over face slide 300 mm, max. turning diameter i.d. bridge 630 mm, longitudinal feed 0.07 - 4 mm/revolution, transverse feed 0.02 - 1.35 mm/revolution, metr. Thread 0.5 - 28 mm pitch, inch thread 56 - 1 gears/inch, module thread module 0.5 - 3.5, thread diametrically pitch 56 - 8,

Exhibition machine! Standard equipment: SDS2-3L Sino 3-axis digital display. Base frame, halogen lamp, jaw American 160 mm, 4-jaw American 160 mm, face plate 250mm, 2 steady restsTechnical data:Tip height 160 mm, center width 900 mm, max. turning diameter 460 mm, spindle bore 38 mm, spindle cone MK5, spindle speed 65 to 1810 rpm, speeds 18, main motor output power 2 Kw S6 ( 1.5 Kw S1), weight 510 kgSymbol photoPrices subject to change, errors, printing and typesetting errors excepted

multifix: ja digital: ja centre distance: 1000 mm : 440 length: 2000 mm width: 1400 mm height: 1500 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A slant bed lathe Traub Sonim is available. Turning diameter over bed/cross slide: 350mm/160mm, turning length: 200mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3200mm/1500mm/1700mm, weight: approx. 3500kg. An on-site inspection is possible.

turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2150 mm turning diameter over slide rest: 1800 mm turning length: 10000 mm speed: 1 - 300 U/min faceplate diameter: 1800 mm spindle bore: 200 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 4-jaw face plate Ø 1800 mm - 2 Steady rest Ø 100 to 560 mm and Ø 1.3 to 1.8 m - 4-way toolpost - tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Copyng lathe with 4 spindles BACCI mod. T4MO - Max turning diameter 170 mm - Max working length 1000 mm - Longitudinal sanding unit - Nr. 4 spindle - Year 1994

turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 610 mm, 375 mm

The machine is in very good condition and still under power. Pick-up can be arranged at short notice.

greates pass round over bed: 1050 mm dist. between centers: 6000 mm centre height: 520 mm turning length: 4810 mm workpiece weight max. (main spindle): 6000 kg Maximum workpiece weight with steady rests: 8000 kg max. torque on the spindle: 12500 Nm number of spindle speeds: 2,8-560 1/min Speed range 24 levels: feed per revolution: 0,08-56 mm chuck diameter: 630 mm Maximum travel distance of the longitudinal slide: 4810 mm Maximum travel distance of the cross slide (suppor: 530 mm Maximum travel distance of the tool slide (support: 340 mm Tailstock quill diameter: 150 mm total power requirement: 31 kVA weight of the machine ca.: 10500 kg dimensions of the machine ca.: 7860 x 1970 x 1480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3 multifix: ja weight: 2 t : 500 centre distance: 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1230x490x2120 mm Weight: 200 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A barely used cycle-controlled flatbed lathe Wagner with extensive accessories is available. Swing diameter over bed/face slide: 500mm/280mm, distance between centers: 1500mm, bed width: 350mm, speed: 3000rpm, travel X/Z: 295mm/1435mm, rapid traverse: 5m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm, quill diameter: 75mm, quill stroke: 150mm, quill taper: MK5, machine dimensions X/Y/Z: approx. 3300mm/1700mm/1700mm, weight: approx. 3000kg, control: Siemens Sinumerik 802C base line, operating hours: approx. 1702h. Including various tools, coolant system, tool holders, 3-jaw chuck and several Parat tool holders. Documentation available. An on-site inspection is possible.

centre distance: 2000 mm : 600 weight of the machine ca.: 3,2 t Passage 49 mm Digital Lynette The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.