We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,600 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Doosan Puma GT2100B CNC lathe 10 inches 2 axis 10 station turret X axis : Q390mm Z. axis: 525mm Chip conveyor Machine is in very good condition
used
Puma 700LM CNC Lathe Length : 3000 mm Diameter : 700 mm C axis 21 inch chuck Fanuc control unit 12 station turret Machine is in good working condition
used
Hyundai Kia SKT 21 LMS CNC lathe C axis 2 piecs live tools will be give(Value is 10 000 USD) Tool holders and tools are included Bar feeder is included Subspindle Probe 8 inch chuck Turning diameter : 400 mm Machine is in good working condition
used
On offer is a DOOSAN lathe, year 2006, type PUMA 160, FANUC computer, USED ONLY 50 WORKING HOURS
used
used
Takisawa NEX-108Y CNC Lathe Y and C axis 11/7.5 Kw spindle engine Takisawa A2-6 4000 rpm spindle Chip conveyor Maximum turning length : 431,5 mm Turning diameter : 260 mm Fanuc control unit Machine is like new
used
Manufacturer DOOSAN Model PUMA 700 LM Year 2005 CNC FANUC 21i TD Capacities Ø Swing over bed 1.030 mm. Ø swing over saddle 800 mm Max turning diameter 900 mm. Max turning length 3.200 mm. C Axis and Driven Tools INCLUDED Chuck size 24” Bar working diameter 164mm. Travels and feedrates X travel 470 mm. Z travel 3.235 mm. Rapid traverse rate X/ Z Axis 12/10 m/min Main spindle Max spindle speed 1500 rpm Speed ranges 2 Main spindle power 75/60 kW Main spindle torque 11.004 Nm Spidle nose A1 – 15 C Axis. Positioning Precision 0,001º Turret No of tool stations 12 Turret tool size 32 x 32 mm Max boring bar size 80 mm. Turret Indexig Time 0.25 s. Rotary tool motor power 11 kW Max rotary tool speed 3.000 rpm. Tailstock Tailstock travel 3.135 mm. Quill diameter 160 mm Quill travel 150 mm Quill bore taper #6 Equipment 3 Jaw-Hydraulic chuck Ø600 mm I ...
used
Type: RNC 5 Plus Mayfran chipconveyor Swing over bed: 600 mm Swing over cross-slide: 425 mm Distance centre tot centre: 1000 mm Spindle cone: A8 Dia of spindle bore: 96 mm Power on the spindle: 18,5 kW Number of speeds: 1 > 4000 rpm Command: GE Fanuc16-T ACCESORIES: yes Toolchanger: yes Number of tools: 12 VDI toolpositions
used
Voest Alpine Weipert NC 500S heavy duty lathe hydraulic steady Sauter toolchanger with 12 positions VDI-tooling Driven tools + C-axis Heidenhain manual Plus 4110 (retrofitted) Swing over bed: 540 mm Swing over cross-slide: 450 mm Distance centre tot centre: 1000 mm Dia of spindle bore: 77 mm Power on the spindle: 35 kW Number of speeds: 11 > 4000 rpm Command: Heidenhain Manual Plus ACCESORIES: yes Toolchanger: yes Number of tools: 12 positions (driven)
used
used
used
used
Haas ST 20 CNC Lathe Turret capacity : 12 Axis: X-Z Live tools : NO spindle speed : 4.000 rpm Chuck size : 210 mm Max Part Swing : 533 mm
used
Bought new in Slovakia. FANUC system, tailstock, suction belt, workpiece catcher. It is also possible to buy a 3m rod feeder FEDEK SN-542 (almost unused), which was previously connected to it, we also bought it new.
used
Spinner TC400 52MC CNC Lathe C axis 8 inches Siemens Control Unit
used
DMG Mori Seiki CTX 310 Ecoline CNC Lathe C axis(4 live tools) Chuck size : 8 inches Machine is in good working condition Control Unit: Siemens 840 D Maximum turning length : 450 mm Maximum turning diameter : 200 mm Number of station on turret : 12
used
Takisawa NEX CNC Lathe and KUKA Robot Takisaw is from 2009 Robot is from 2013(KRC4 60 KG) Machine and robot can be seen in working condition
used
The machine is functional, in good technical and visual condition. The lathe has powered tool holders Year 2005 Sinumeric 802D control Turning length 520mm Turning diameter 280mm Spindle passage 65mm
used
Doosan LEO 1600 CNC Lathe Fanuc control unit 6 inches Machine has been used only on aluminium Machine has very low working hour Max. Turning diameter mm (inch) 320 (12.6) Max. Turning length mm (inch) 303 (11.9)
used
Spinner TC800 110 MCY CNC Lathe CY axis 15 inches chuck Number of axis : 4 Power : 33kW Max rpm: 2600 rpm Turning diameter : 500 mm Tailstock: Yes Machine is in good condition
used
Goodway GLS 200 CNC Lathe Max turning diameter : 360 mm Max turning length : 500 mm
used
Control system: Mitsubishi Running time: 37.200 hrs good condition inspection possible
used
Control system: Mitsubishi Running time: 23.500 hrs good condition inspection possible
used
Control system: Mitsubishi Running time: 17.000 hrs good condition inspection possible
used
Doosan Puma 280L CNC Lathe Swing over bed mm. 630 Turning length : 1200 mm
used
Manufacturer Combi Model K2 Year 2001 Turning length 2500 mm Turning Ø 245 mm Ø above the bed 4000 mm Type of CNC Fanuc 210 IT Spindle taper MK5 Turning speed 250 rpm Spindle motor power 11 kW Tailstock yes Bar feeder no
used
Numerical Control: Z32 Touch screen Center height mm 210 Center distance mm 1000 Turning diameter over the bench mm 410 Turning diameter on the cross carriage mm 160 Bench width mm 260 ASA 6” spindle nose attachment Spindle hole diameter mm 62
used
Numerical control lathe, DMS 8TSY marketed by Utimac, two-spindle, motorized y-axis, Fanuc control, year 2009, bar 65 passage, bellegrandi BA60 collet chuck, BA52 caliper counter-spindle, Iemca Master 880 bar loader in production.
used
turning diameter: 800 mm turning length: 4000 mm control: cnc total power requirement: kW weight of the machine ca.: 7,3 t dimensions of the machine ca.: 6,6x2,2x2 m Brand: Phoenix Type: FL 8040 CNC IT Year of make: 2001 Distance between centers: 4.000 mm Centre height: 400 mm Swing over bed: 800 mm ø Swing over support: 510 mm ø Swing in the gap: 1.100 mm ø Spindle boring: 250 mm ø Steady rest: 350 mm ø 3-Jaw chuck: 630 mm ø Machine dimensions (lxwxh): 6.500 x 2.200 x 2.000 mm Machine weight: 7.300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
FANUC 18iTB CNC X Axis travel 250 mm Y Axis travel 100 mm Z axis travel 580 mm Powered tool station No. 12 Self-centering chuck Diam 254 mm Spindle speed Rpm 35 -3500 Spindle power 15/22 kW C axis travel ° 360 Tool dimensions 25×25 mm Tool rotation speed Rpm 50-5000
used
Spindle bore : 42 mm Stroke X : 160 mm Stroke Z : 260 mm Stroke Y : 70 mm Turret : 12 posts Spindle speed : 5000 rpm Power spindle motor : 7.5 KW Power subspindle motor : 3.7 KW
used
CNC : MATRIX II Maxi turning diam : 350 mm Distance between centers : 500 mm Main spindle chuck diam : 210 mm Spindle bore : 76 mm Stroke X/Z : 30/33 m/min Spindle speed : 5000 rpm Power motor : 26kW Turret : 12 posts Subspindle speed : 6000 rpm Subspindle power : 7.5kW EQUIPMENT : Chip coveyor : Barfeeder : LNS
used
CNC Fanuc Oi-TC Rotating diameter on the bench 510 mm Rotating diameter on the carriage 290 mm Maximum turning diameter 250 mm Maximum turning length 510 mm Turning diameter from bar 51 mm X axis travel 175 mm (160 + 15) Z axis travel 550 mm Spindle speed Rpm 6000 Spindle motor Kw 12 ASA A2#5 spindle connection
used
Z Axis travel: 1118 mm Turning diameter: 648 mm Spindle connection: ASA11 Chip conveyor: Yes on the whole Self-centering main spindle dimensions: 381 mm Max Bar Passage Capacity: 102 mm Spindle power Kw: 37 kw Government Unit: Fanuc Main Spindle Spindle Speed: 2400 Rotating diameter: 876 mm
used
Doosan Puma 700XLY CNC Lathe Fanuc control unit Max. turning diameter : 900 mm Machine is in excellent condition Year : November 2017
used
Turning machining center Doosan type PUMA 1500 SY, bu, 2008 year, Fanuc CNC, overall dimensions 3118 1705, weight 4800 kg, power consumption 39.5 kVA, 4 pieces available!
used
bar diameter 18 mm. max. turning length 160 mm. spindle/counter spindle speed 8,000 rpm rapid feeds 32 m/min controllable axes 4 machine dimensions 1600x1000x1660 mm. Pusher tube
used
Graziano ctx310 Year 2002 Diam spindle 200 Passage of bar 50 12 tools Siemens sinumerik840d control Complete with many tools
used
Yang ML-15A Year 1995 Diam spindle 160 Passage of bar 30 6 tools Fanuc O-T control Stopped for 2 years Tool kit included
used
Working hours : 18831 h Maxi diameter over bench : 920 mm Maxi diameter over carriage : 745 mm Maxi turning diameter : 550 mm Distance between centers : 1416 mm Stroke X : 315 mm Storke Z : 1350 mm Rapid speed X/Z : 30 m/min Spindle speed : 3000 rpm Spindle bore : 95mm Turret : 12 posts ACCESSORIES : Steady rest Living tools Chip conveyor Tailstock Lot of tooling
used
Used Daewoo Puma 230 MS cnc lathe Year 2003 IEMCA Bar loader Visible in Italy CE
used
2012 Muratec MW 120 GT Metal 2012 Muratec MW 120 GT and more: Mori Seiki ZT 1500YB in operation, can be viewed during operation. 2002 yes Mori CL 2000 can be viewed under power. Currently not in operation 2004 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2001 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2003 yes Tsugami NP-32 can be viewed under power. Currently not in operation 1992 yes Riello in operation, can be viewed during operation. 2002 yes
used
Tool holder and accessories included (see photo) In perfect working order, serviced, ready for testing, connected. Rod diameter 32 mm, year 2005. See the photo for characteristics Connected
used
- LNS Quick Load Servo 80 S2 short bar loading magazine (for mounting on the lathe) - Tools + tool trolley - Collets - Control 840D
used
Machine is in good condition Max bar diameter mm. 36 Spindle speed rpm / min 6300 Machine is in good condition
used
The lathe is in good condition. Berg lathe chuck. Full technical documentation turret: 12 - VDI-40 tools max. spindle speed 4000 /min passage 90 mm max. roll 600mm max turning length 1000mm machine weight: 7.5 tons
used
Machines are in excellent condition 2 machines are available for sale 2 Kamsan 3 meter bar feeder Mitsubishi control unit See all details : http://www.polygim.tw/products/product_detail-29
used
Hurco TM8 Type of CNC Hurco ULTIMAX Turning length 483 mm Turning Ø 256 mm Ø above the bed 548.6 mm Ø above transversing slide 320 mm Length between centers 584.2 mm X-axis 203.2 mm Z-axis 508 mm Spindle bore 61 mm Number of turrets 1 Number of tools on turret 10 Number of rotating tools 10 Turning speed 4800 rpm Spindle motor power 11.2 kW Tailstock
used
Muratec Mt 12 CNC Lathe With Integrated Portal And Quick Load Automatic Feeding System
used
Hyundai L210A CNC Lathe 10 inches Machine is in good working condition Swing over the bed : 550 mm Swing over the carriage : 350 mm Maximum turning diameter : 350 mm Maximum turning length : 410 mm