cnc lathe gildemeister used for sale

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V bore capacity in steel: 16 mm throat: 169 mm quill stroke: 50 mm turning speed range - drilling: 50 - 2250 U/min spindle drive: 0,5 kW total power requirement: 0,75 kW weight of the machine ca.: 0,175 t dimensions of the machine ca.: 1,3 x 0,65 x 1,3 m 3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 125 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 1,25 x 0,6 x 0,6 m Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: 320 mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,6 x 0,75 x 1,7 m SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm bezel fixed Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. Base cabinet is optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 20 mm tailstock quill taper MT: 2 tailstock quill stroke: 60 mm metric threading: 0,4 - 3,0 mm thread - inch: 10 - 44 TPI thread - module: 0,2 - 12,5 mm connected load frequency: 230 V total power requirement: 1,0 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 380 mm turning length: 700 mm control: SIEMENS spindle turning speed - stepless: 2500 U/min tailstock quill taper MT: 4 weight: 1.5 t dimensions of the machine ca.: 2000x1400x1820 mmxmmxmm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5411 Type: SK 12 Producer: TOS Created: 1961 Parameters: Table diameter: 1200 mm Max. turning diameter: 1300 mm Maximum workpiece weight: 4 t Max. workpiece height: 1000 mm Weight: 18.3 t

VTL TOS SKJ 8F, working condition

I am selling this machine. Plugged in, can be tested. Very good condition. Documentation for the machine. Can be sent via whatsapp video of the machine

Max stock diameter 20 mm Number of tool stations 30 Spindle speed 10.000 rpm Main Spindle Axes 4 Back Spindle Axes 4

Seiger SLZ1000 (2009) – Short Details - Type: Heavy-duty cycle lathe (Zyklen-Drehmaschine) See picutres for specs The SLZ1000 is known for its stability, precision, and suitability for heavy-duty turning tasks, especially with large or long workpieces Find more here - / Contact us at -

A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible.

Center width: 1000mm, turning diameter over bed/crank/trolley: 360mm/510mm/205mm, spindle bore: 42mm, speed: 2100rpm, machine dimensions X/Y/Z: approx. 1950mm/900mm/1350mm, weight: approx. 750kg. On-site inspection is possible.

Manufacturer: SOMAB Model: UNIMAB-500 Year of Manufacture: 1989 Machine Type: 2-axis CNC lathe Control System: NUM SOMAB PL+5 Workpiece Probing System: Manual UNILOG program transfer software Weight :3400kg Technical Specifications: - Swing over bed: 500 mm - Max. machining length: 1450 mm Carriage: - Longitudinal Z travel: 1406 mm - Transverse X travel: 267 mm - Optical scale: ✗ Spindle: - Spindle nose: A1 8” ISO - Spindle bore: 72 mm - Speed range: 1500 to 6000 rpm - Power: 18 kW - Lubrication: Yes Chuck: - Chuck diameter: 315 mm Turret : - Number of tool stations: 4 - Tool holder type: BTS - Tool probing system: ✗ Tailstock : - Taper: CM5 - Sleeve diameter: 90 mm - Sleeve travel: 150 mm Find more here - / Contact us at -

The machine is in good technical condition, a test run is possible by prior arrangement. Lathe WEILER Praktikant 160 AC Year of Make: 1996 Serial Number: 4057 Circumferential diameter over bed: 320 mm Center width: 650 mm Circumferential diameter over support: 160 mm Spindle bore: 35 mm Speed range: 48 – 2500 rpm Drive power: 4 kW Dimensions (L x W x H): 500 × 1240 × 1550 mm Weight: 680 kg

Specification: Automatic plate

Pinacho SC 200 Ø 402 x 1000 mm Distance between centers: 1000 mm Swing over bed: 402 mm Swing over cross-slide: 380 mm Swing in gap: 560 mm Diametre of main spindle bore: 42 mm Power on main spindle: 4 kW Number of speeds: 40 > 2800 rpm Digital screen: yes Length: 2390 mm Width : 910 mm Height: 1625 mm Weight: 1190 kg

Key data: 800 mm, 4000 mm

Description Seiger SLZ 800E cycle lathe incl. milling unit Details Machine no. 4443 Year of construction 2008 Control Siemens Sinumerik Turning diameter 800 mm Turning length 4,000 mm Face plate 800 mm, 4 jaws Face plate 500 mm, 4 jaws 3-jaw chuck 400 mm Lynette up to 450 mm (2 different) Accessories various jaw sets powered tool Permissible workpiece dimensions: between tips without setting stick 2,000 kg with a setting stick 2,200 kg with two sets 2,500 kg flying in the face plate 750 kg Machine dimensions incl. cladding 2,000 mm + Tip Wide x 2,750 mm x 2,000 mm incl. documentation

ED 300ECO Metal Lathe Motor 400W (S1) 230V 50Hz Dimensions in mm 760x230x254 Center width/height 300mm / 90mm Rotary spindle speed 50-2500 rpm Spindle bore 20mm Spindle mount MK3 Tailstock Cone MK2 Travel longitudinal slide 275mm Traverse travel cross slide and top slide 70mm Quill path 5mm Thread Metric in mm/r 0.5-2.5 max. tool holder 8mm Weight 48kg G&HM ED300Eco_2

CW61125B Ø 1250 x 8000 mm Distance between centers: 8000 mm Swing over bed: 1250 mm Diametre of main spindle bore: 130 mm Power on main spindle: 21 kW Number of speeds: 3 > 315 rpm Length: 11 000 mm Height: 1700 mm Weight: 17,8 ton Max weight between centers: 5 ton

turning length: 2000 mm : 980507 x-axis: 7000 mm z-axis: 10000 mm : 65 mm total power requirement: 15 kW weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workbench parallel Lathe WABECO 10200 Between points: 500 mm Maxi Ø on bench: Ø 200 mm Maxi Ø over saddle: Ø 120 mm Spindle diameter: Ø 26 mm Spindle speed: from 10 to 1000 RPM (on electronic dimmer) Square/ tilting turret 3-jaws chuck Ø 100 mm Year of construction: 2001 Tailstock CM2 Longitudinal auto feeds Supplied with the gears (see photo) Supplied without the table Voltage: 220 V mono Dimensions (L x W x H): 1200 x 300 x 450 mm Weight: approx 100 kg

Combined copying milling machine - lathe MICHÄL KÄMPF

Colchester Univ. Lathe Master 2500 Center height 180 mm Center width 600 mm Bore (passage) 40 mm RSF 2-Axis Digital Display Type Z-550 incl. accessories

Parallel Lathe JET PROMAC 941 V Between points: 500 mm Maxi Ø on bench: Ø 240 mm Maxi Ø over saddle: Ø 140 mm Spindle diameter: Ø 21 mm Spindle speed: from 100 to 1700 RPM Square turret Chuck: 3-jaws Ø 125 mm Year of construction: 2012 - Almost new Spindle motor: 1,3 kW Threadings: Metric + Whitworth Tailstock: CM2 Variable speed drive for the spindle Supplied with one 4-jaws chuck Ø 125 mm Supplied with the gears for threading Electronic tachometer Voltage: 220 V mono Dimensions (L x W x H): 1200 x 600 x 1400 mm Weight: approx 200 kg

Turning diameter over bed: 500mm, turning diameter over face slide: 250mm, center distance: 2000mm, spindle bore: 58mm, speed: 1400rpm. The feed of the machine is defective. On-site inspection is possible.

BACCI horizontal copying lathe mod. TC4O - 4 working positions -Cabin - Wheelbase 180 mm. - Complete with manual

Manufacturer: Citizen Model: M-32 Year of Manufacture: 2003 The machine comes with an automatic bar feeder and oil mist filter. Automatic Bar Feeder: Manufacturer: FMB Model: TURBO 5-42/3200/C Year of Manufacture: 2004 Find more here - / Contact us at -

Manufacturer: Citizen Model: M32 V Year of Manufacture: 2003 Mass: 3200 kg The machine comes with an automatic bar feeder and oil mist filter. Find more here - / Contact us at -

SPECIFICATIONS: Center width: 1200 mm Tip height: 250 mm Installed power: 2.2 kW Spindle speed min/max: 650/3000 rpm EQUIPMENT: Miscellaneous accessories and tools

3-jaw wedge rods lathe chuck FORKARDT TYPE F+160No. 1659 181Identical to Forkardt, SMW or RöhmDiameter: 160 mmInner diameter: 45 mmChuck flange: Short taper DIN 55022 Size 61 Set of chuck jaws consisting of basic jaws and hard top step jaws for turning1 set of chuck jaws consisting of basic jaws and soft top step jaws for turning- central adjustmentWeight: 11 kggood condition; used

Hydraulic copying device SAUTER type KMC 8001Copier turning device, copying turning device for lathesThe copying device comes from a lathe.Connections for oil supply and oil returnCopying stroke: approx. 140 mmRadial travel at 60 Construction: 120 mmRequired operating pressure: approx. 25 barOil volume flow: max. 7 litres/min. Drive power of the lathe: max. approx. 15 kWSpan cross-section: max. 3.5 mm²Copy carriage stroke: approx. 125 mmDistance of lathe chisel to the stylus: 800 mmDead weight Copier: approx. 100 kggoods

Manufacturer: Böhringer Model: DUS 560 Year of Manufacture: 2011 Machine Type: Universal CNC Lathe Control System: Sinumerik 805 Max. Turning Length: 1,000 mm Max. Turning Diameter: 500 mm Max. Workpiece Weight: 700 kg Drive Power: 19 kW Spindle Speed Range: 2 – 2,500 RPM Find more here - / Contact us at -

Technical data: Complete retrofit year 2008 CNC Fagor 8055T Working diameter 4,200mm Table diameter 4,000mm Table speed 55rpm Z axis travel 1,500mm nr.02 RAM capto C8 tool holder Maximum workpiece height 2,000m main motor power 182 Kw nr.01 chip evaders permissible weight on the table 50 ton Machine in excellent condition available unless sold.

Technical data: Complete retrofit year 2002 CNC Fagor 8065T Working diameter 3,400mm Table diameter 3.200mm Table speed 59 rpm Z axis travel 1,500mm nr.02 RAM capto C8 tool holder Maximum workpiece height 1,640m main motor power 75 Kw nr.01 chip evaders Weight allowed on the board 16 ton Machine in excellent condition available unless sold.

Tornio verticale Morando KR 50-65 usato, retrofittato a nuovo Tornio dotato di: Modalità di tornitura; Modalità di fresatura/foratura con asse C per posizionamento tavola in continuo; Utensili motorizzati. Dati tecnici: CNC: Siemens 840 SL Diametro plateau: 5000 mm Potenza motore mandrino: 120 kW Diametro tornibile: 6500 mm Diametro max passaggio fra i montanti: 7000 mm Portata mandrino: 100 ton Altezza di tornitura: 4000 mm Corsa verticale della traversa: 3800 mm Dimensioni macchina completa di protezioni: 12000x7500x11000(h) mm

Parallel Lathe WABECO D6000E Between points: 600 mm Maxi Ø on bench: 270 mm Maxi Ø over saddle: 170 mm Spindle speed: from 45 to 2300 RPM Multifix turret type A Concentric 3-jaws chuck Ø 100 mm (NEW) Year of construction: 1998 (machine very little used) Spindle speed by variator Tailstock CM2 Scale 2 axes EAE type Mikronel 220 L Supplied with one clamp tie rod Accessories: 5 tool holders + different thread wheels Voltage: 220 V mono Dimensions (L x W x H): 1500 x 900 x 1700 mm Weight: approx 200 kg

Universal lathe TOS SN 40C/1500

Inv. Num. : 8570 Type: SU 50 A/2000 Producer: TOS Generated: Parameters: Maximum turning length: 2000 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter via support: 250 mm Weight: 3260 kg Equipment: Digital measurement

Röhm 20641, KFM 130/2, Power Chuck 130 MO KFM 2-Jaws, ZA110 Overall diameter: 130 mm PF003850 Number of Jaws: 2 Jaw Stroke: 5.5 Inner diameter: 46 mm Width: 63 mm Manufacturer's specifications for technical data: Max. actuation force: 5 kN Max. total clamping force: 11 kN max. speed: 3950 rpm rpm min^-1 at that time new price approx. 4500€ You can find more power chucks - new and used - in our shop! International shipping costs on request!

Main spindle: Spindle bore (I.D.): 80 mm Spindle nose: ASA A2-8 Revolver: Automatic 4-cavity turret SQT-190-87-C Lining (front): 3-jaw universal chuck ASA8 Diameter: Ø 315 mm Speed: 1250 rpm Inner Passage (I.D.): 103 mm Accessories: Set of 3 basic jaws Ø 315 mm Accessories: Set of 3 hard top jaws Ø 315 mm Accessories: Set of 3 soft top jaws Ø 315 mm Lining (back): 3-jaw universal chuck (rear) Diameter: Ø 315 Inner Passage (I.D.): 103 mm

CONTROLS   CNC Teach In Controls SIEMENS BASIC FUNCTIONS   design principle: flatbed   number of spindles: 1 WORKING RANGE TURNING   swing diameter (max): 720 mm   turning diameter (max): 380 mm   bar diameter (max): 108 mm   worpiece length max.: 1500 mm MAIN SPINDLE   spindle revolutions (min): 0 /min   spindle revolutions (max): 1200 /min   number of gears: 3   spindle bore diameter: 108 mm X/Z SLIDE   traverse velocity Z (max): 5000 mm/min   traverse velocity X (max): 5000 mm/min   rapid traverse Z: 5000 mm/min   rapid traverse X: 5000 mm/min   tool fixture: Steel Holder TAILSTOCK   distance betw. centers (max): 1500 mm   sleeve stroke: 200 mm   sleeve diameter: 120 mm   taper: MK 6  ...

Lathe Hempel Semi-automatic stencil lathe Hempel Type: CH 4 Turning length 400 mm max. turning diameter 100 mm Spindle motor 4 kW, 2800 rpm. Hydraulic pump motor 0.85 kW Infinitely adjustable hydraulic feed Automatic workflow – clamping the scantlings, forwarding and rewinding the front support with the turning steels, finishing turning through the forming steels on the rear supports and clamping the finished turned part Weight approx. 725 kg

Distance between centers: 3000mm, swing over bed/cross slide/in bed gap: 630mm/350mm/880mm, spindle bore: 77mm, speed: 1600rpm, power: 7.5kW, tailstock: MT5, quill stroke: 250mm. Machine dimensions X/Y/Z: approx. 5050mm/1300mm/1450mm, weight: approx. 3500kg. Includes three-jaw chuck, fixed and travelling steadies, as well as a quick-change tool holder. An on-site inspection is possible.

WMW Niles Ø 1400 x 2000 mm Distance between centers: 2000 mm Swing over bed: 1400 mm Swing over cross-slide: 1100 mm Swing in gap: 1800 mm Diametre of main spindle bore: 90 mm Power on main spindle: 14 kW Number of speeds: 382 rpm Chuck (3/4 pinch) -- diametre: 1200 mm

Klaaßen SDM15-5 turning machining centre, The top lathe we offer has the following in the basic configuration Technical parameters: ▪ SDM 4-5 CNC 4-Panel Bed Precision Lathe - Z-travel (slide longitudinal)= 5,000 mm (6,000 with TAE3) X-travel (face slide transverse)= 1,000 mm Y-axis (vertical movement)= 350 mm Maximum workpiece Ø = 1,500 mm Circulation diameter over face slide = 1,500 mm - Center width = 4,500 mm (5,500 with TAE3) ▪ CNC machine designed as a 4-lane tip lathe with full drive-over of the Bezels and superstructures - - - Cross slides and face slides restrict the diameter range by lateral arrangement on the lathe bed. As a result, there is no accompanying Diameter restriction above the face slide/tool carrier. Cross slide unit can be fully attached to the steady rests, HSSL and tailstock. This significantly reduces the set-u ...

Center height: 230mm, turning diameter over bed/cross slide: 460mm/270mm, spindle bore: 62mm, distance between centers: 1000mm, threading range inch: 4-80 TPI. The machine has been retrofitted with a digital display. An on-site inspection is possible.