cnc lathe gildemeister used for sale

Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Bar automat Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Spindle nose: Camlock D1-6, Machine equipped with: (1x) Sony digital readout, Type: LG10-2 with X and Y readout, (3x) chuck, (1x) tailstock.

ul> Distance between heads: 3000 mm Diameter above the bench: 800 mm Lathe equipped with a fixed bezel Digital visualization MINILEXPRO 3-jaw chuck Manual tailstock Lots sold as is, unchecked, without tools or tool holders.

centre height: ca. 150 mm centre distance: 1300 mm : vorhanden diameter: ca 250 mm digital readout: 1x make: Heidenhain u. Werkzeug-Sc serial number: 63-06 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Rexroth System 200 BTV30 Circulation diameter over bed: 160 mm Circulation diameter over face carriage 250 mm Chuck diameter 160 mm Turning length 300 mm Spindle speed 8000 min-1 12-speed revolver with attached Competition. Workpiece conveyor belt Conveyor Various tool holders

chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300

Consisting of: (1x) Clamping plate, (1x) carriage/guide seat and 4-jaw chuck.

Unchecked

With pallet accessories.

CONVENTIONAL LATHE Inv. No. 13.223C1 Make OPTIMUM Model D660x3000DPA Serial number 2-130 Center distance 3000 mm Max. swing over bed Ø 660 mm Max. swing over cross slide Ø 440 mm Spindle bore Ø 105 mm R.P.M. 25 – 1.600 HP 7.5 Volts 400 Cycles 50 Including: 3-jaw chuck Emergency stop. Threading Coolant system Safety protection screen D.R.O. 2 axes

Clamping claw chuck 250mm diameter, automatic thread cutter

(3x) Lathe chucks (3- and 4-jaw) with loose jaws and accessories.

Center height 165 mm, center width 635 mm, spindle bore approx. 40 mm, power 2.2 kW

Make PBR Model TM200P Centre distance 1.250 mm Max. Swing over Bed Ø 400 mm Max. Swing over Cross-slide Ø 210 mm Max. Swing in Gap Ø 600 mm Spindle bore Ø 55 mm R.P.M. 33 – 1,500 (12x) KW 4 Volts 380 Cycles 50 Accessories: Taper turning attachment Quick change toolpost Coolant

CNC LATHE Inv. No. 13.113C1 Make PBR Model T30 SNC x 1500 Control SIEMENS 805T Year 1996 Centre Distance 1.500 mm Max. Swing over Bed Ø 600 mm Max. Swing over Cross Slide Ø 410 mm Max. Swing in Gap Ø 960 mm Spindle Bore Ø 105 mm R.P.M. 47 – 2.000 (in 2 ranges) kW 15/22 Volts 400 Cycles 50 Including: Automatic Turret, 8 positions Enclosed guarding Coolant

Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

TEACH IN LATHE Inv. No.: 12.689C1 Make CHEVALIER Model FCL40160 Mach. No. X7895C01 Control SIEMENS 810D Centre Distance 4.000 mm Max. Swing over Bed Ø 1.015 mm Max. Swing over Cross Slide Ø 670 mm Spindle Bore Ø 134 mm R.P.M. 0 – 1.200 kW 22/33 Volts 400 Cycles 50 Including: 1 x Steady Rest Ø 300 mm Chip Conveyor 4 Way Automatic Toolpost Fixed toolpost multifix Hydraulic chuck 380mm

Description Hoesch MFD CNC Heavy Duty Lathe with Siemens Control Details Face plate Ø 2,006 mm Center height 1,499 mm Reversible saddle Ø 2,235 mm Circulation diameter over bed Ø 2,997 mm Turning length 12,192 mm min/max workpiece held in chuck Ø 457 mm/1,600 mm Maximum workpiece weight 110 tons Speed range 0.5-140rpm (300hp engine) Feed range 0.0118-7.08"/rpm Permanent capacity Ø 356-902 mm Copy depth 508 mm inductive Maximum cutting force 30,000 Nm Double drum with constant capacity Ø 356-902 mm 50 Ton Capacity, Roll Type

Equipped with various turning parts, spindles, and clamps for lathes

Turning diameter above bed 600mm, turning diameter with removable part of bed approx 800mm, max turning diameter above carriage 430mm. Newall digital X-Y readout, including various tool holders, 2 glasses, and four-jaw chuck (500mm). Please note! The available forklift cannot load this machine, please bring your own suitable resources

CNC SINGLE COLUMN VERTICAL BORING MILL Inv. No.: 12.769D1 Make PITTLER Model PV1600 Control SIEMENS 880 Year of Manufacture 1995 Max Swing Ø 1600 mm Table diameter 1500 mm Z-Travel 800 mm X-Travel 1600 mm B-axis 360,000 Table speeds 2.8 – 450 rpm Driven tooling speed 0 – 5000 rpm Driven tooling type SK50 Rapids 12 m/min Motor 90 KW Electrics 440V – 3Ph – 50 Cycles Dimensions 9200 x 6900 x 4740 mm Weight of Machine 31500 KG Including: A.T.C., 20 Positions Flood Coolant Through spindle coolant Interlock guards Twin swarf conveyor

Conventional version 8 spindle speeds Speed range: 65 – 1150 rpm 3-jaw chuck available Extra clamping plate / chuck included 4-way tool holder Tailstock available Mechanical gearbox Signs of wear and slight corrosion visible

CONVENTIONAL LATHE Inv. No. 13.188C1 Make PINACHO Model S-90/180 Mach.no. 22417 Centre Distance 750 mm Max. Swing over Bed Ø 360 mm Max. Swing over Cross Slide Ø 205 mm Spindle Bore Ø 42 mm R.P.M. 30 – 2000 kW 2.2/3.4 Volts 400 Cycles 50 Including: 3-Jaw Chuck Ø 200 1 x Steady Rest Toopost Rapid Original type A Coolant attachment

HEMPEL CKE semi-auto lathe 20 Long. max 2000 mm, max Ø 250 mm. Manual/auto controls, longitudinal carriage, 3-jaw chuck. Robust construction for wood or metal turning, suitable for prod. average. Reliable and versatile machine.

CONVENTIONAL LATHE Inv. No. 13.038C1 Make TOS Model SUI 50 Serialnumber 150200900558 Centre Distance 2000 mm Max. Swing over Bed Ø 500 mm Max. Swing over Cross Slide Ø 320 mm Max. Swing in gap Ø 560 mm R.P.M. 14 – 2240 kW 7 ,5 Volts 400 Cycles 50 Including : DRO Coolant Emergency stop Safety protection over chuck

CONVENTIONAL LATHE Inv. No. 13.114C1 Make STANKO Model 1M635 Center distance 3.000 mm Max. swing over bed Ø 700 mm Max. swing over cross slide Ø 380 mm Spindle bore Ø 76 mm R.P.M. 10-1250 (16x) kW 15 Volts 380 Cycles 50 Including: 3-jaw chuck

Including various accessories

Lot consisting of drills, tappers and all kinds of accessories. See photos.

Centre distance 1.100 mm Max. Swing over Bed Ø 360 mm Max. Swing over Cross-slide Ø 180 mm Max. Swing in Gap Ø 480 mm Spindle bore Ø 40 mm R.P.M. 33 – 1,500 (12x) KW 4 Volts 380 Cycles 50 Accessories: Quick change toolpost Coolant

Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Weibert DB 460XL Vario Lathe Diameter max. 305mm Center Size x Height: 460 x 155mm Spindle head thread M33 x 3.5 MK2 3 speeds: 650-1430, 1240-2790, 1600-3800 rpm Electronically variable Rotating grain tip Four-pronged driver Swivel steel support 150mm, 300mm Clamping washer 145mm Quill adjustment: 55mm Motor 550W 230V 50Hz Dimensions (LxWxH): 900 x 340 x 410mm Net weight approx. 38kg G&STÜ-5920462

Control: manual Max.turning length: 1500 mm Max swing diametr over bed: 500 mm Quick Change Toolposts:1 Coolant tank:50l 2006 Made in Slovakia

Control: SIEMENS / MTC K Max.turning length: 1000 mm Max swing diametr over bed: 500 mm Quick Change Toolposts:1 Coolant tank:100l Made in Germany

Max.turning length: 600 mm Max swing diameter over bed: 250 mm Quick Change Toolposts:1 Coolant tank:50l Made in Germany Control: manual

Gurutzpe Super AT lathe. Distance between centers: 4000mm. Swing: 1020mm. Swing over carriage: 710mm. Swing in gap: 1320mm. Bore: 76,5mm. Motorized carriage. 4 independent jaws chuck. DRO Heidenhain.

Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos

Tip distance approx.                                                    400 mm Tip height above bed 130 mm 12 speeds from 125 – 2800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Specifications: Maximum turning length 90 mm Circulation diameter over bed 220 mm Circulation diameter over support 110 mm Center width 160 mm Bore 23 mm 3 speeds 350 / 700 / 1400 rpm