133,970 used machines on RESALE, but how to find them? Machine Search
Engine Brand: MERCEDES, Condition: USED, Nominal Power @ Nominal Rpm: 295 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Bore: 128 mm, Stroke: 166 mm, Engine Capacity: 12800 cc, Qty Cylinders: 6 Qty, Engine Fuel Type: diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 6405 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 340 Kw, Rated Speed: 1900 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mercedes-om-458-991-used/4 2315, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.050 kg, Type number: OM 458.991
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Working Hours: 6405 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 225 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c7-1-881-43557 07-used/42350, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 940 kg, Type number: C7.1 881-4355707
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 205 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c7-1-881-45865 16-used/42338, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.250 kg, Type number: C7.1 881-4586516
diameter: div. number: 44x tool adaptor: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Overhead Crane Indoor Crane Overhead Crane Steel Crane 1 t / 20.4 m STEEL EL-A10-20,410 E Year of construction :1999 Load capacity: 1000 kg Lifting height (max. hook travel): 6 m Gauge center (span) : 20,410 m Crane weight complete : approx. 3 t Degree of protection: IP54 Connected voltage: 400 V Control voltage :230 V Works perfectly, carefully removed and packaged, maintained in good condition, regular maintenance and inspection Documents available such as test book, data sheet, technical documentation, circuit diagrams, operation and maintenance instructions Prices: 7,500.00 Euro net + 1,425.00 ( 19 % VAT) = 8,925.00 Euro gross All prices are net including loaded onto trucks VAT reclaimable Shipping possible. Several cranes available in different span and lifting capacity
Power generator machine set, stock as good as new, unused Machine set (engine/generator/radiator) on base frame Engine: Perkins Type: 4012-46 TAG2A LTP power: 1650 kVA PRP power: 1500 kVA Cooling: Water Speed: 1500 1/min Generator: Leroy Somer LSA 50.2 L8 Voltage: 400/231 V, 50 Hz Operating hours: None! Warranty: 6 months from delivery Subject to prior sale - errors possible! Internal reference number: E-1004-104
pressure: 185 t chamfer lenght: 4000 mm distance between columns: 4100 mm Control: Cybelec VisiTouch 24MX stroke: 300 mm dayligth: 500 mm : 175 mm/s bending speed: 0-12 mm/s total power requirement: 22 kW weight of the machine ca.: 15.500 kg dimensions: 4970 x 3260 x 2090 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 t chamfer lenght: 4000 mm distance between columns: 4100 mm Control: Cybelec VisiTouch 24MX stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 18 kW weight of the machine ca.: 13.000 kg dimensions: 5080 x 3110 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ABB SDS 100 Servo Drives SDS102-069A0-400V00-0000 3ADT211027R0001 46kW overhauled by the manufacturer Output 670V DC Input 380-400V AC 39 kg Very large selection of ABB Servo Drive. Our equipment has all been overhauled. See pictures. Devices are shipped regardless of the date of refurbishment. Please note that the colors on your screen may differ slightly from the original colors. H1R1a23 More items - new and used - can be found in our shop! International shipping costs on request!
Interroll roller track 2.17m with drive The Interroll roller track element is in very good condition. Furthermore, the runway has its own drive motor. Series: 5600 Width: 410mm Length: 2175mm Pitch: 75mm Load Capacity: 200kg per meter Drive voltage: 400Volt Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!
Bosch Aventics, R 412 000 393, R412000393, rotary module, Pemax: 8 bar Item condition: unused stock goods The goods come from a company liquidation from the automotive industry and were temporarily stored in paternosters. Slight traces of storage possible. H1R6A13K33 12_CK 2Kg You can find more rotary modules - new and used - in our shop! International shipping costs on request!
pressure: 100 t chamfer lenght: 4100 mm distance between columns: 3700 mm column arm: 415 mm stroke: max. 215 mm dayligth: 410 mm ajustment speed: 200 mm/sec working feed: 10.0 mm/sec return speed: 150 mm/sec work height max.: 1080 mm table width: 100 mm Control: CYBELEC oil volume: 160 ltr. voltage: 400 V power capacity: 8.5 kW weight: 10200 kg range L-W-H: 4800 x 1800 x 2600 mm Equipment: - BEYELER electro-hydraulic CNC press brake - CNC CYBELEC control unit DNC 1200 PS/B” High-resolution screen Clear, concise menus in the operators language Tool and product library Swiveling control panel, front right - CNC-controlled axes (Y1+Y2-X) - CNC-controlled backgauge adjustment (X-axis) 2x manually adjustable stop fingers - Manual upper tool clamping - Manual lower tool clamping - Rear safety device (safety door) - Side safety device (safety doors) - Bending tools 1x set of split uppe ...
Year: 2006 - technically efficient, ready to work – after full service - 2 pneumatic motors (top + bottom) - disc cutter: 250 mm - 2 CNC axes - working height: 140 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/Outfeed table
FOR SALE - NEW PRECOMBUSTION CHAMBER + SPARK PLUG SOCKET Part Number: 438604 + 367151
A Zionair sandblasting cabin is available. Cabin volume: 420l, internal dimensions X/Y/Z: 1200mm/600mm/580mm, max. workpiece weight: 40kg. Machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 125kg. An on site inspection is possible.
A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible.
Offered is a tensile testing machine year 1979 with retrofitted Doli testing software. Test material reinforcing steel, max. tensile force approx. 400kN, clamping tool: VAS Prüftechnik & Werkzeugbau year 2015. Inspection possible by arrangement.
Transnorm Belt conveyor 1880-400-300 RA1391 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1996 Condition: good (used) Motor: fully functional conveyor length (FL): 1880 mm nominal / external width (NB): 400 mm belt width (GB): 300 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 1.05m/s, adjustable conveying speed with frequency converter also possible at extra cost Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1996 condition: good (used) Conveying length in mm: 1880 Nominal / outside width in mm: 400 Belt width in mm: 300 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,10 scope of delivery: without supports and side guides For individual, professional advice, simply get in to ...
Machine set up for ampoule labelling With new format sets, also suitable for cylindrical objects such as vials or cartridges Suitable for ampoules of 1, 2, 3, 5, 10, 20, 30 ml Output: 12,000\endash27,000 ampoules/hour Label processing range: min. 25 x 10, max. 110 x 78 mm Label roll diameter 400 mm Inclined belt infeed magazine for cassette filling Label presence check with luminous sensor Allen hot printing device, type holder 5 lines Scanware camera for 100% print control Scanware camera for colour ring control Automatic reject ejection with counter-check Inline outfeed to downstream tray packaging/cartoning machine With format sets for 1, 2, 3, 5, 10, 20 ml ampoules in accordance with DIN EN ISO 9187-1 Modem for remote monitoring Electronic batch protocol with audit trail 21 CFR Part 11 compliance Beckhoff service ...
Cutting length: 2520 mm, cutting thickness: 4 mm, voltage: 380 V, power connection: 16 A. The blades of the shears are likely no longer able to be sharpened due to wear and tear and would need to be replaced. On-site inspection is possible.
Max. operating temperature: 450°C, number of fans: 1, fan power: 0.75kW, power loss: 8kW, voltage: 400V, phases: 3, frequency: 50Hz, power supply: 26/26/32A, connected load: 18kW, control panel: Program Controller C40. With full documentation. The oven is in good condition, has been inspected regularly, and was in operation until recently. An on-site inspection is possible.
Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Rectangle: 200 x 80 or 150 x 70 mm mitred at 45° rectangular/flat: 150 x 70 mm Portrait: 100 x 60 mm 2 cutting speeds by pole-switchable motor: 19 and 28 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Drive motor: 380 V, 1.7/2.6 kW Weight: approx. 850 kg Space requirement: 1200 x 1100 x 1620 mm
Shaft Ø: 40 mm Bending Capacity: Flat bar upright at 500 mm Ø: 60 x 10 mm flat at 400 mm Ø: 100 x 15 mm square at 500 mm Ø: 35 mm L-iron leg outwards at 450 mm Ø: 50 x 50 x 6 mm L-iron leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-iron T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm electr. Connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 400 kg
Paper cutter EBA 430 E, format 43 cm, in as new condition with optional box stand. With all serial equipment and operation manual. Safety cover in from and back.
dimensions of saw-band: 5.330 x 41 x 1,3 mm capacity 90 degrees: round: 460 mm capacity 90 degrees: square: 460 mm capacity 90 degrees: flat: 440 x 600 mm Cutting area at 45 degrees left: round: 445 mm : 410 mm Cutting area at 60 degrees left: round: 295 mm Cutting range at 60 degrees left: square: 295 mm table height: 890 mm cutting speed: 25 - 80 m/min total power requirement: 3,75 kW machine weight ab.: 1.500 kg dimensions: 2810 x 1135 x 1860 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 8,5 bar liter capacity: . l total power requirement: 454 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- 4 head drilling machine - with the existing accessories
A paper filling system for dispensing packaging paper is available. Speed: 12m/min, basis weight: 50g/m²/70g/m². Machine dimensions X/Y/Z: approx. 630mm/400mm/400mm, weight: approx. 40kg. Documentation available. An inspection on site is possible. The machines are ready for dispatch. The picture is an example.
A paper filling system for dispensing packaging paper is available. Speed: 85m/min, operating modes: 3, grammage: approx. 50g/m²/70g/m². Machine dimensions X/Y/Z: approx. 910mm/910mm/1650mm, weight: approx. 25kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The image is a sample unit.
Several air cushion machines activaTec are available. Production speed: 15m/min, film thickness range: 13mm-40µm, roll length: 700m/1500m. Machine dimensions X/Y/Z: approx. 315mm/300mm/315mm, weight: approx. 10kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The picture shows an example unit.
CNC Portal Plasma Cutting Machine with Skew Rotator Bevel Bevel Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2020 CNC Control: Global Control Plus Working area: 3 x 12 m Track width: 4,000 mm 1 oxy-fuel burner ALFA 1 plasma torch with Skew Rotator Bevel bevel unit Power Source Hypertherm XPR300 Cutting thickness: 50 mm hole piercing 80 mm cut-off Extraction table Beuting without filter system Software: Omniwin with Bevel
Year of manufacture 2005 4 drum feeders TAS (standing) 2 drum feeders TAL (horizontal) 1 UFA 400 transfer feeder Stapler ST 400 4 staple heads 2 eyelet stitching heads Three-knife trimmer TR 400 Medium-cut device Compensating stacker Gämmerler BL 408 Price on request. Worldwide delivery & installation.
connected load frequency: 230 V dimensions: 1,6 x 0,8 x 1,55 mm weight: kg Bubble wrap machine - Documentation - Includes 7 rolls of film - Like new condition See pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Thickness planer PANHANS type 425 510mm is optically and technically in very good condition, the machine comes from an assembly company and has been used only a little, everything is in its original condition, nothing has been repainted, the machine has only been cleaned everything works perfectly with non-return protection the planer blades can be adjusted very easily and very precisely, there are adjustment gauges that can be screwed onto the knife shaft, which ensures the highest precision the chips can be discharged very well through the closed system with 4-knife shaft for normal strip planer knives The thickness table is mounted on 2 trapezoidal spindles to prevent tipping and torsion. with protective cover that can be opened upwards max. planing width 510mm, max. planing height 250mm the machine will be delivered and demonstrated by us personally throughout Germany for ...
Manufacturer: Engel Model: Emotion 440/160 Year of Manufacture: 2018 Max. installation height :460 mm • Center support package • Max. closing force :1600 kN Cylinder size: 40 mm • Screw CRN coated • OptiShut backflow preventer • max. spray pressure 1940 bar • Injection volume 55-220 cc Max. injection weight :174 g Operating hours: 33526 h Equipment: • 1 core pull incl. auxiliary unit • Plasticizing cylinder set, highly wear-resistant design • Needle valve nozzle • E-Flomo • IQ weight control • IQ Clamp control • EM 63 interface • separate water and electricity connections Find more here - / Contact us at -
Specifications Maximum pressure: 32 tons Pressing force: 4.33 kg/cm2 Number of bindings: 4 horizontal Channel cross-section: 820 x 900 x reg mm Dimensions of the tailgate: 82 x 135 cm Bale weight: bos 400 kg Weight: approx. 6.1 tons Power connection: 380 V/ 22 kW Bale tying: automatic
• Brand: C.M.I, • Model: BF 4000, • Serial No.: 0046, • Year of construction: 2006, • Operating hours: approx. 4,500 h, • Weight: 62 t (without accessories), • No-load shaft speed: 3 rpm
x-travel: 14000 mm y-travel: 4480 mm z-travel: 3000 mm w-travel: 300 mm table:: table load: (145) 450 t table width: 3100 mm table length: 14770 mm Passage height: 3800 mm passage width: 3200 mm diameter of quill: 305 mm spindle turning speed range: max. 600 U/min spindle motor: 100 kW rapid travel x/y/z: 12 / 6 / 6 m/min output: 100 kW quill:: ISO 60 control: SIEMENS 840 D Powerline total power requirement: - kW total wight: - t dimensions of the machine ca.: - m Complete retrofit in 2010 - Siemens 840D powerline CNC control - Table guide: hydrostatic -- Hydrostatic system redesigned for max. load of 450 tonnes (with even load distribution) - Orthogonal milling head ISO 60 - Angle milling head ISO 60 - Additional attachment heads available that have not been used to date (extra option) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 4.500 mm greates pass round over bed: 810 - 760 mm swing diameter over slide rest: 740 mm control: SIEMENS - 840 C max. turning diameter: 800 mm turning diameter over slide: 740 mm travel -x2 axis: 875 mm travel -z2 axis: 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=1.36 m, Overall length= 1.72 m, Overall width= 0.74 m, Net weight= 193 kg,
Height=2.31 m, Overall length= 3.62 m, Overall width= 0.82 m, Net weight= 504 kg,
Dimensions (L/W/H): 1800x740x1000 mm Weight: 420 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 815x740x1140 mm Weight: 232 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2700x1400x1750 mm Weight: 1800 kg Total power requirement: 5 kw Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4500x1500x2000 mm Weight: 6500 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 5000x1150x2980 mm Weight: 665 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1900x1000x1250 mm Weight: 800 kg Total power requirement: 12,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1300x1200x1650 mm Weight: 440 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3300x2100x2100 mm Weight: 1500 kg Total power requirement: 17,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
