We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,882 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Spinner TC400 52MC CNC Lathe C axis 8 inches Siemens Control Unit
used
Chipconveyor 2 steadies - max workpiece weight without steady: 3500 kg - max workpiece wieght with steady: 5000 kg Swing over bed: 920 mm Swing over cross-slide: 550 mm Distance centre tot centre: 5000 mm Spindle cone: ASA 11 Dia of spindle bore: 130 mm Power on the spindle: 22 kW Number of speeds: 8 > 1500 rpm Command: Heidenhain Manual Plus Total power needed: 65 kW Weight: 9100 kg Chuck: dia 800 mm
used
VDI Tooling (VDI 40 - DIN 69880-40 / DIN 5480) Chipconveyor Shunk chuck Coolant pump 12 bar nbsp; Swing over bed: 380 mm Distance centre tot centre: 675 mm Max longitudinal travel Z-axis: 550 mm Max cross travel X-axis: 300 mm Dia of spindle bore: 87 mm Power on the spindle: 25/34 kW Number of speeds: 5000 rpm Command: Heidenhain Plus IT Toolchanger: yes Number of tools: 12 driven VDI toolpositions
used
DMG Mori Seiki CTX 310 Ecoline CNC Lathe C axis(4 live tools) Chuck size : 8 inches Machine is in good working condition Control Unit: Siemens 840 D Maximum turning length : 450 mm Maximum turning diameter : 200 mm Number of station on turret : 12
used
Takisawa NEX CNC Lathe and KUKA Robot Takisaw is from 2009 Robot is from 2013(KRC4 60 KG) Machine and robot can be seen in working condition
used
The machine is functional, in good technical and visual condition. The lathe has powered tool holders Year 2005 Sinumeric 802D control Turning length 520mm Turning diameter 280mm Spindle passage 65mm
used
Doosan LEO 1600 CNC Lathe Fanuc control unit 6 inches Machine has been used only on aluminium Machine has very low working hour Max. Turning diameter mm (inch) 320 (12.6) Max. Turning length mm (inch) 303 (11.9)
used
Spinner TC800 110 MCY CNC Lathe CY axis 15 inches chuck Number of axis : 4 Power : 33kW Max rpm: 2600 rpm Turning diameter : 500 mm Tailstock: Yes Machine is in good condition
used
Goodway GLS 200 CNC Lathe Max turning diameter : 360 mm Max turning length : 500 mm
used
Control system: Mitsubishi Running time: 37.200 hrs good condition inspection possible
used
Control system: Mitsubishi Running time: 23.500 hrs good condition inspection possible
used
Control system: Mitsubishi Running time: 17.000 hrs good condition inspection possible
used
Doosan Puma 280L CNC Lathe Swing over bed mm. 630 Turning length : 1200 mm
used
Manufacturer Combi Model K2 Year 2001 Turning length 2500 mm Turning Ø 245 mm Ø above the bed 4000 mm Type of CNC Fanuc 210 IT Spindle taper MK5 Turning speed 250 rpm Spindle motor power 11 kW Tailstock yes Bar feeder no
used
Numerical Control: Z32 Touch screen Center height mm 210 Center distance mm 1000 Turning diameter over the bench mm 410 Turning diameter on the cross carriage mm 160 Bench width mm 260 ASA 6” spindle nose attachment Spindle hole diameter mm 62
used
Numerical control lathe, DMS 8TSY marketed by Utimac, two-spindle, motorized y-axis, Fanuc control, year 2009, bar 65 passage, bellegrandi BA60 collet chuck, BA52 caliper counter-spindle, Iemca Master 880 bar loader in production.
used
FANUC 18iTB CNC X Axis travel 250 mm Y Axis travel 100 mm Z axis travel 580 mm Powered tool station No. 12 Self-centering chuck Diam 254 mm Spindle speed Rpm 35 -3500 Spindle power 15/22 kW C axis travel ° 360 Tool dimensions 25×25 mm Tool rotation speed Rpm 50-5000
used
Spindle bore : 42 mm Stroke X : 160 mm Stroke Z : 260 mm Stroke Y : 70 mm Turret : 12 posts Spindle speed : 5000 rpm Power spindle motor : 7.5 KW Power subspindle motor : 3.7 KW
used
CNC : MATRIX II Maxi turning diam : 350 mm Distance between centers : 500 mm Main spindle chuck diam : 210 mm Spindle bore : 76 mm Stroke X/Z : 30/33 m/min Spindle speed : 5000 rpm Power motor : 26kW Turret : 12 posts Subspindle speed : 6000 rpm Subspindle power : 7.5kW EQUIPMENT : Chip coveyor : Barfeeder : LNS
used
CNC Fanuc Oi-TC Rotating diameter on the bench 510 mm Rotating diameter on the carriage 290 mm Maximum turning diameter 250 mm Maximum turning length 510 mm Turning diameter from bar 51 mm X axis travel 175 mm (160 + 15) Z axis travel 550 mm Spindle speed Rpm 6000 Spindle motor Kw 12 ASA A2#5 spindle connection
used
Z Axis travel: 1118 mm Turning diameter: 648 mm Spindle connection: ASA11 Chip conveyor: Yes on the whole Self-centering main spindle dimensions: 381 mm Max Bar Passage Capacity: 102 mm Spindle power Kw: 37 kw Government Unit: Fanuc Main Spindle Spindle Speed: 2400 Rotating diameter: 876 mm
used
Doosan Puma 700XLY CNC Lathe Fanuc control unit Max. turning diameter : 900 mm Machine is in excellent condition Year : November 2017
used
Turning machining center Doosan type PUMA 1500 SY, bu, 2008 year, Fanuc CNC, overall dimensions 3118 1705, weight 4800 kg, power consumption 39.5 kVA, 4 pieces available!
used
bar diameter 18 mm. max. turning length 160 mm. spindle/counter spindle speed 8,000 rpm rapid feeds 32 m/min controllable axes 4 machine dimensions 1600x1000x1660 mm. Pusher tube
used
Graziano ctx310 Year 2002 Diam spindle 200 Passage of bar 50 12 tools Siemens sinumerik840d control Complete with many tools
used
Yang ML-15A Year 1995 Diam spindle 160 Passage of bar 30 6 tools Fanuc O-T control Stopped for 2 years Tool kit included
used
Working hours : 18831 h Maxi diameter over bench : 920 mm Maxi diameter over carriage : 745 mm Maxi turning diameter : 550 mm Distance between centers : 1416 mm Stroke X : 315 mm Storke Z : 1350 mm Rapid speed X/Z : 30 m/min Spindle speed : 3000 rpm Spindle bore : 95mm Turret : 12 posts ACCESSORIES : Steady rest Living tools Chip conveyor Tailstock Lot of tooling
used
Used Daewoo Puma 230 MS cnc lathe Year 2003 IEMCA Bar loader Visible in Italy CE
used
Jesco Jaguar Ø 840 x 4100 mm CNC Swing over bed: 840 mm Swing over cross-slide: 560 mm Distance centre tot centre: 4100 mm Dia of spindle bore: 105 mm Command: Fagor 8060FL Length: 6500 mm Width: 2100 mm Height: 2000 mm Toolchanger: yes Number of tools: 8 positions
used
- LNS Quick Load Servo 80 S2 short bar loading magazine (for mounting on the lathe) - Tools + tool trolley - Collets - Control 840D
used
Machine is in good condition Max bar diameter mm. 36 Spindle speed rpm / min 6300 Machine is in good condition
used
The lathe is in good condition. Berg lathe chuck. Full technical documentation turret: 12 - VDI-40 tools max. spindle speed 4000 /min passage 90 mm max. roll 600mm max turning length 1000mm machine weight: 7.5 tons
used
Hurco TM8 Type of CNC Hurco ULTIMAX Turning length 483 mm Turning Ø 256 mm Ø above the bed 548.6 mm Ø above transversing slide 320 mm Length between centers 584.2 mm X-axis 203.2 mm Z-axis 508 mm Spindle bore 61 mm Number of turrets 1 Number of tools on turret 10 Number of rotating tools 10 Turning speed 4800 rpm Spindle motor power 11.2 kW Tailstock
used
Muratec Mt 12 CNC Lathe With Integrated Portal And Quick Load Automatic Feeding System
used
Hyundai L210A CNC Lathe 10 inches Machine is in good working condition Swing over the bed : 550 mm Swing over the carriage : 350 mm Maximum turning diameter : 350 mm Maximum turning length : 410 mm
used
Jinn Fa JCL-60 automatic lathe, programmed for bar feeder with 40 mm passage, Siemens CNC, complete with machining equipment.
used
used
Fanuc 18iTB Weight approx. 1,400 kg Main spindle 8,000 U/min Spindle passage diameter 32mm Work race X 250mm Z 285mm Year 2016
used
Machine weight: 4000 kg Spindle drilling: 51 mm Spindle speed - range: 5000 Chuck diameter: size 8 mm X/Z Stroke:: 213/572 mm Powered tools: : 4000 rpm Horse:: YES Machine dimensions lxwxh: 3620 x 2290 x 2340 mm
used
Lathe MAS Kovosvit MT 70/ 2000 CNC, Siemens Sinumerik system, year of manufacture 2004 is in good technical condition. Circulating diameter above the bed: 820 / max / mm Distance between spikes: 2000 mm Spindle drilling: 106 mm Spindle speed - range: 1800
used
The machine is in good technical condition. Max. machining diameter: 32mm Max. machining length: 190mm Tool ID: 4 ID tool length: 50mm Dimensions: L x W x H: 2280 x 1175 x 1825mm Weight: 2950 kg
used
The POLY GIM DIAMOND 52 lathe is in good technical condition. Can be seen in operation by appointment. Distance between spikes: 470 mm Spindle drilling: Spindle through hole diameter: 60 mm Spindle speed - range: 100-4000 Max. turning diameter:: 500 mm Max. outside machining diameter:: 300 mm X and Z axis: : 200 and 510 mm
used
Circulating diameter above the bed: 500 mm Revolving diameter above support: 290 mm Distance between spikes: 780 mm Spindle speed - range: 500 Chuck diameter: 170 mm Max. workpiece weight: 45 kg Largest turning diameter:: 200 mm Maximum turning length: : 500 mm Number of driven tools:: 12
used
Machine in good technical condition, possibility of testing after agreement. Technical parameters: - spindle passage: 105 mm - max. circulating diameter above the bed: 630 mm - max. rotating diameter above support: 400 mm - max. diameter for turning: 630 mm - max. turning length: 1800 mm - axis displacements: X 350 mm Z 1810 mm Machine weight: 3800 kg
used
Control unit Mazatrol T Plus Turning diameter 350 mm Turning length 365 mm X-Axis travel 200 mm Z-Axis travel 365 mm Bar capacity 41.91 mm Spindle bore 52 mm Spindle speed 5000 rpm Spindle taper JIS A2-6 Motor power 11 kW Turret tool capacity 12 positions Dimensions L 5000 x W 3500 x H 3000 mm
used
Control unit Siemens Sinumerik 840D Passage over the bed 650 mm Passage diameter over the bed 380 mm Distance between centers 3000 mm Spindle bore 105 mm Number of ranges 2 (automatic change) Spindle speed 2 - 2000 rpm Tailstock quill diameter 100 mm Tailstock quill extension 200 mm Tailstock taper 6 Morse Traverse travel 370 mm Weight 5500 kg
used
Turning diameter: 320 mm Turning length: 495 mm Turret positions: 12 CNC Brand: Mazatrol Flex GL 150 Gantry loader Full C Axis 360.000 Double chuck Double 12 position revolver Tool eye Max. turning Ø:320mm X-Axis: 230mm Z-Axis: 495mm Spindle bore: 61mm Speedrange: 5000Rpm Spindle power: 22kW ATC / revolver:2 x 12 Length: 6500mm Width: 2300mm Height: 3100mm Weight: 7600kg
used
Type: E 30 Parameters: Manufacturer: Weiler Year of production / SO / GO: 2018 / - / - Description: Lathe in good technical condition, after agreement the possibility of testing. Maximum turning length (Z axis) 750 mm. Turning diameter above the bed (max) 330 mm. Maximum rotation speed of the main spindle 4500 1 / min. Total power consumption 15 kW. Lathe weight 1.7 t.
used
Turning diameter: 570 mm Turning length: 1000 mm Turret positions: 1 CNC Brand: Siemens CNC Model: SIEMENS 810D Swing over bed Ø 570 mm Swing over cross slide Ø 340 mm DBC Turning Length 1000 mm Bed width 350 mm Tailstock spindle Ø 80 Ø Spindle taper 5 Mk Workpiece weight 1300 Speeds / ranges 2500 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 5000 mm/min.
used
Machine weight: 4200 kg Circulating diameter above the bed: 600 mm Revolving diameter above support: 400 mm Spindle speed - range: 45-4500 Max. workpiece weight: 120/300 kg Max. turning diameter: : 300 mm Max. turning length in chuck:: 510 mm Max. diameter of turned bar:: main spindle/counter spindle: 65/34