131,211 used machines on RESALE, but how to find them? Machine Search
Machine type: Edgebander Manufacturer: Homag Model: KF 61/07/QA/25 Year: 2004 Serial number: 0-202-25-9459 Technical data: - Application: Edge banding of chipboard and MDF panels - Machine type: Throughfeed edgebanding line - Workpiece thickness: approx. 8 – 60 mm - Feed speed: infinitely variable up to approx. 40 m/min Electrical data: - Voltage: 380 V - Frequency: 50 Hz - Phases: 3 + N Equipment: - Industrial edgebanding system for furniture production - Rolling chain transport system - Suitable for continuous production lines Remarks: Machine used in industrial woodworking environment; functionality not checked, sold \"as is\". Own mass: approx. 6000 kg Dimensions (LxWxH): approx. 11500 x 3000 x 2000 mm Auction-ID: A7-46477-3
Machine type: CNC drilling machine Manufacturer: Biesse Model: Skipper 130 Year: 2008 Serial number: 04671 Control: BiesseWorks CNC system Application: CNC machining center for wood panels (drilling, milling, grooving) Technical data: - Working area (X/Y): approx. 3000 x 1300 mm - Workpiece thickness: 8 – 90 mm - Min. workpiece size: approx. 90 x 70 mm - Drilling spindles: 31 + 31 vertical (top & bottom) - Horizontal spindles: 8 + 8 (X direction), 2 + 2 (Y direction) - Max. spindle speed: 6000 rpm (drilling), up to 24,000 rpm (electrospindle) - Main motor power: approx. 4.5 kW (electrospindle) - Total installed power: approx. 22.5 – 24 kW Working capabilities: - Simultaneous machining on top and bottom sides - Processing of all 6 sides in one pass - Drilling, milling, grooving and dowel operations - Automatic panel measurement and thickness adjust ...
Machine type: CNC drilling machine Manufacturer: Biesse Model: Techno Logic Year: 1987 Serial number: 239187 Technical data: - Machine type: Throughfeed multi-spindle drilling machine - Application: Drilling and boring of wood panels - Working width (X-axis): up to approx. 3200 mm - Panel processing: horizontal and vertical drilling - Drilling units: multiple vertical and horizontal heads - Control system: electronic positioning system Electrical data: - Voltage: 380 V - Total power: approx. 28 kW Equipment: - Throughfeed conveyor system - Multi-spindle drilling heads - Pneumatic clamping system - Chip extraction system Remarks: Machine used in industrial woodworking production; functionality not checked. Own mass: approx. 4500 kg Dimensions (LxWxH): approx. 5600 x 2450 x 2000 mm Auction-ID: A7-46477-4
A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible.
Length 2100mm 320 x 120 1 piece 320 x 160 2 pieces 200 x 100 5 pieces With Atlas connectors on the front side Auction-ID: A1-46501-2089
A CNC coordinate measuring machine Zeiss calibrated at the end of 2025 is available. Measuring dimensions X/Y/Z: 1200mm/1800mm/1000mm, max. workpiece weight: 2000kg, length measurement deviation: 2µm/L300, resolution: 0.2µm, measuring rate: 200/s, max. stylus length: 800mm, max. probe mass: 600g, measuring head: VAST Gold Scanning. Machine dimensions X/Y/Z: approx. 3000mm/2050mm/3550mm, weight: approx. 6000kg. Without grid plate, probe rack, software license and computer. Documentation available. An on-site inspection is possible.
CNC Portal Plasma Cutting Machine Manufacturer: Eckert Type: Jantar 2 Year of Make: 2011 CNC control Working area: 2x4 m 1 plasma torch with power source Kjellberg HiFocus 161i Automatic gas console Extraction table
The machine is in good technical condition, after prior agreement it is possible to test it. with a bar seller, 65 mm draw tube passage, Sauter revolver, driven tools, hydraulic tailstock, it is after GO, new draw cylinder for clamping tools, still connected in operation, including draw tube inserts, tool holder, etc.,
Used lathe with numerical control HEIDENHEIM PLUS Basic parameters: Diameter: 490 mm, Length 1000 mm Max. diameter over cross slide 280 mm Bed width: 350 mm Spindle bore 65 mm Main motor 12/16 kW Max. speed 2500 /min Feed range 0.01 - 3 mm/rev. Quill stroke 160 mm Quill bore 70 mm Dimensions 2800 x 1800 x 1400 mm Weight 3.2 tons
Make: Sodick Type: CNC Die Sinking EDM Machine Model: AM3L Control: Sodick LN1 Technical data: - Working tank: Die sinking EDM - Table size: approx. 600 x 400 mm (estimated) - Axes: X / Y / Z - CNC control: Sodick LN1 Equipment: - Die-sinking EDM generator - Enclosed working area with safety guard - Control cabinet with monitor & keyboard - System 3R tooling interface - Oil unit (Oilmatic temperature regulator) - Dielectric filtration system Condition: Used Auction-ID: A7-45993-51
Key data: 350 mm, 650 mm, 3500 1/min
CNC Teach-in Lathe COLCHESTER Alpha 1350 XT CNC FANUC Between points: 650 mm Maxi turning diameter: Ø 350 mm Spindle diameter: Ø 42 mm Rotation max: 3500 RPM Turret: 8 tools Year of construction: 2006 Working hours: 174 working hours only MACHINE IN VERY GOOD CONDITION
DMG MORI CL2000A CNC turning center was built in 2017 in Japan by DMG MORI CO., LTD. The machine is new and has never been used. The DMG MORI CL2000A is an excellent choice for the production of high-precision and repeatable parts used in many industrial sectors. This compact yet extremely powerful lathe will excel in even the most demanding production challenges. All machining processes, i.e. precision turning or threading, are performed fully automatically by means of the spindle and the cutting tools, taken from a 10-position turret. The spindle, driven by a high-powered motor, rotates at a maximum speed of 4500 rpm and operates in two X,Z axes with feeds of 245 mm and 370 mm respectively. What’s more, the machine’s design is based on the Finite Element Method (FEM). This solution guarantees the maintenance of high geometrical accuracy of the design, even under heavy loads. ...
Machine type: CNC Die Sinking EDM Manufacturer: Sodick Model: AM35L Control: Sodick LN / LN1 control Year: n/a Serial number: n/a Working hours: n/a Table size: approx. 600 x 400 mm Axis travel (X/Y/Z): approx. 350 / 250 / 250 mm (typical for model) Process type: Die sinking EDM Generator: Sodick generator Tank: Integrated dielectric tank Control system: Sodick LN1 control with external monitor (KME) Data input: Floppy disk (2DD) interface Cooling system: External oil temperature regulator (Kanto Seiki Oilmatic) Pump system: Integrated dielectric pumps Accessories: Oil temperature unit, dielectric system, control unit Remarks: Machine in used condition. Control boots (system loading visible). Typical signs of use and dirt/oil residues. Equipped with external oil temperature control unit and dielectric system. Own mass: approx. 3,500 kg Dimensi ...
Machine type: CNC Vertical Machining Center Manufacturer: Tongtai Model: TMV-720A Control: Heidenhain CNC control Year: n/a Serial number: n/a Working hours: n/a Table size: approx. 900 x 400 mm Spindle: Vertical spindle Tool holder: SK40 (visual assumption) Tool changer: Yes, side-mounted tool rack Number of tool holders: approx. 20+ pcs included Coolant system: Yes, internal coolant nozzles Chip management: Chip conveyor installed Coolant unit: External filtration unit (Granch Filtration) Control panel: Heidenhain with manual pulse generator (MPG) Emergency stop: Yes Status light: Yes Accessories: Tool holders, coolant system, filtration unit Remarks: Machine in used condition, signs of wear and coolant residues visible. Control boots and initializes. Includes multiple tool holders and external coolant filtration system. Own mass: approx. 5 ...
Make: Sodick Type: CNC Die Sinking EDM Machine Model: AQ35LR Control: Sodick LN1 Controller model: LQ3 Technical data: - Axes: 3 (linear) - Working tank: Die-sinking EDM - Table size: approx. 600 x 400 mm (estimated) - Z-axis display visible on control Equipment: - Sodick LN1 CNC control with keyboard & monitor - Integrated dielectric system - Tooling system (Walker-Hagou fixture visible) - Electrode changer / tool rack - Pressure gauges and flushing system - Manual control pendant Condition: Used Auction-ID: A7-45993-52
Make: Big-Plus (Taiwan) Type: CNC Vertical Machining Center Model: 850 VMC Serial number: BM110CE01 Control: FANUC Series 0i-MD Technical data: - X / Y / Z travel: approx. 850 mm / 500 mm / 500 mm - Table size: approx. 1000 x 500 mm - Spindle speed: 10,000 rpm - Main voltage: 415 V AC - Power requirement: 20 kVA - Air required: approx. 6–8 kg/cm² Equipment: - Vertical spindle (Big-Plus spindle system) - Tool changer (carousel type) - Coolant system - Enclosed working area with sliding door - Manual pulse generator (handwheel) Control panel: - FANUC interface with display and full keyboard - Feed / rapid / spindle override controls - Emergency stop and cycle controls Condition: Used Auction-ID: A7-45993-49
Machine Overview Machine Type: Used Multi-Tasking Machine (Turn-Mill Center) Manufacturer: MAZAK Model: INTEGREX 200-III S (IG 200S III) Year of Manufacture: 2004 Control System: Mazatrol PC FUSION CNC 640MT Pro Working Area & Capacity Max. Swing / Turning Diameter: 660 mm Max. Turning Diameter over Carriage: 500 – 660 mm Max. Bar Work Capacity: 51 mm Max. Workpiece Weight: 100 kg (Chucked) / 150 kg (Shaft) Travels (X / Z / Y / W): 580 / 1045 / ±80 / 1050 mm B-Axis Swivel Range: -30° to +195° (0.0001° positioning) Spindle Specifications Main Spindle: 22 kW, 35 – 5,000 rpm, 349 Nm torque Second Spindle: 18.5 kW, 35 – 5,000 rpm, 326 Nm torque C-Axis Indexing: 0.0001° (Both spindles) Chuck Diameter: 210 mm (Main & Second spindle, Kitagawa B-208) Milling Spindle & Tooling Milling Power: 15 kW Milling Speed: 15 – 12,000 rpm Tool Magazine: 80-station (Drum typ ...
Type: CNC surface grinding machine Model: ABA Z&B EL 806 Year: 2003 Control: CNC control panel (integrated aba control) Working area: Magnetic clamping table Machine layout: Horizontal grinding spindle with enclosed working area Technical data: Voltage: 400 V Total power: 29 kW Machine weight: approx. 5,700 kg Equipment: - Magnetic clamping table - Enclosed grinding cabin with sliding door - Coolant system - Air filtration unit (AIRTECH) - Control panel with joystick and keypad Condition: Used, not tested Remarks: Signs of wear and corrosion visible; complete system with extraction unit Own mass: approx. 5,700 kg Dimensions (LxWxH): approx. 4000 x 2200 x 2200 mm Auction-ID: A7-45993-17
Table size: 800x400 mm Tool changer 12-speed Electric handwheel Auction-ID: A1-46607-98
Make: Dugard Type: CNC Vertical Machining Center Model: Eagle 1000 VMC Serial number: MC97BF06 Control: FANUC Series 0i-MC Technical data: - X / Y / Z travel: approx. 1000 mm / 500 mm / 500 mm (typical for model class) - Spindle speed: 8000 rpm - Main voltage: 415 V AC - Power requirement: 20 kVA - Air required: 5–6 kg/cm² Equipment: - Vertical spindle - Tool holders included (side mounted rack) - Coolant system - Manual pulse generator (handwheel) - Enclosed working area with sliding door Control panel: - Full FANUC keyboard and display - Feed / rapid / spindle override controls - Emergency stop and cycle controls Condition: Used Auction-ID: A7-45993-48
Fully populated tool changer, 30 position tool changer, with dividing head - 4 axis, Vise ALLMATIC LC125, Handwheel Auction-ID: A1-46607-33
Type: CNC Vertical Machining Center Brand: EMSIL Techtrans Model: DMC2100H Control: FANUC Series 18i-MB Machine Type: Super Vertical Machining Center Axes: 3-axis (X / Y / Z) Equipment: - Enclosed working area with sliding doors - Large T-slot worktable - Automatic tool interface (tool holder included) - CNC control panel with screen and full keypad - Emergency stop - Coolant system with adjustable nozzles - Electrical cabinet integrated - Status signal tower (stack light) Displayed Data (at time of inspection): Run time: approx. 19,568 h Part count: 84,933 Condition: Used Remarks: Alarm displayed (pressure low); machine not tested; sold as seen Auction-ID: A7-45993-78
X-axis: 600mm, Y-axis: 400mm, Z-axis: 420mm; Speed range:20-4000 rpm, Tool holder: ISO40, Clamping table: 900x480mm, Control: Heiden-Hain, Type: TNC350 ; for more details see photos of manual Auction-ID: A7-46619-300
Table size: 1000 x 560 mm Probe: Heidenhain Tool changer: 30 places Auction-ID: A1-46607-51
A CNC universal bed milling machine Anayak is available. Travel X/Y/Z: 2500mm/900mm/975mm, table dimensions X/Y: 2900mm/800mm, spindle taper: ISO50, spindle speed: 3000rpm, power: 22kW, feed: 6m/min, rapid traverse: 10m/min, tool positions: 30. Machine dimensions X/Y/Z: approx. 6000mm/3000mm/3000mm, weight: approx. 20000kg, control: Heidenhain TNC 426. Documentation available. An on-site inspection is possible. Expected to be available around September 2026.
4-axis dividing head Auction-ID: A1-46607-111
A CNC universal bed milling machine Anayak is available. Travel path X/Y/Z: 2000mm/1300mm/1460mm, table dimensions X/Y: 1350mm/1550mm, max. table load: 6000kg, speed: 3000rpm, spindle taper: ISO50, feed rate: 3m/min, rapid traverse: 10m/min, weight: approx. 24000kg, control system: Heidenhain TNC426CB. Documentation available. An on-site inspection is possible.
Key data: 290 mm, 450 mm, 5000 1/min
Control: EPL Country of origin: Germany Spindle passage: Ø65 mm Tool turret: 12-fold driven places Tool holder: VDI 40 Speed tools: 3000 rpm Weight: approx. 4,700 kg + 600kg control cabinet Chip conveyor: BMF Bürener Maschinenfabrik Bar feeder: GIOVANNI CUCCHI, type DB 70 Tools for an extra charge There are a total of 6 machines with bar feeder (price per machine with loader) Dcjwvey N Tdzeu Nu Ieg There is 1 machine without loader available (€ 8.500,-)
Tool Holders and Machining Tooling – Assorted Set General data: Equipment type: Tool holders and cutting tools Condition: Used Included items: SK / ISO / BT taper tool holders ER collet chucks Drill chucks Small boring heads Assembled tooling (drills, countersinks) Applications: CNC machining and milling operations Drilling, boring, and finishing processes Tool clamping and precision workholding Description: Set of industrial tool holders and cutting tools used in CNC and conventional machining. Includes various taper holders, collet systems, and assembled tooling suitable for a wide range of machining applications. Ideal for workshops, toolrooms, and production environments. Auction-ID: A7-46498-56
BROTHER TC-R2A – CNC Vertical Machining Center General data: Manufacturer: Brother Model: TC-R2A Machine number: 111291 Year of manufacture: 2002 Machine type: CNC vertical machining center Technical details: Axis travel (X / Y / Z): 420 / 320 / 450 mm Tool changer: 14-position automatic tool changer Pallet changer: yes Rotary table: CNC rotary table included Control system: CNC control: Brother Electronic handwheel: included Description: Compact CNC vertical machining center BROTHER TC-R2A designed for high-speed and precise machining operations. Equipped with automatic tool changer, pallet changer, and rotary table, the machine is suitable for efficient production and multi-axis processing in industrial environments. Auction-ID: A7-46498-40
BROTHER TC-215 – CNC Vertical Machining Center General data: Manufacturer: Brother Model: TC-215 Machine type: CNC vertical machining center Technical details: Spindle speed: 6000 – 10000 rpm Control system: CNC-400 Description: CNC vertical machining center BROTHER TC-215 designed for precision milling and machining operations. The machine provides reliable performance and a versatile spindle speed range, making it suitable for various industrial and workshop applications. Auction-ID: A7-46498-58
Rotary table diameter: 700 mm Table surface: 1250 x 700 mm B-axis: +30 / -120 C-axis: 360 Tool changer: 32 times 2019: X/Y/Z guides and KGT renewed Auction-ID: A1-46607-120
Tool changer: 20 places electronic handwheel Auction-ID: A1-46607-119
Travels: X-axis: 210 mm Z-axis: 520 mm Auction-ID: A1-46607-52
1 Pos-Mill 2050 3-axis machine, year of manufacture: 2016 Heidenhain control, HSK63 Spindle speed 12,000 rpm, spindle hours: 10,375, 60-station tool changer, travel ranges 2050 mm x 1050 mm x 780 mm, MH infrared probe, tool measurement with Blum laser, IKZ. Hours in pictures Find more here - / Contact us at -
Pos-Mill H800U 5-axis machine, manufactured in 2016 Heidenhain control, HSK63 Spindle speed 18,000 rpm, spindle hours: 9,601, 96-position tool changer, travel ranges 670 mm x 820 mm x 600 mm, Heidenhain infrared probe, tool measurement with Blum laser, IKZ. Hours in pictures Find more here - / Contact us at -
Travel X/Y/Z: 350mm/250mm/256mm, travel U/V: +/-70mm, max. taper angle: 30°, max. height: 100mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 750mm/550mm/150mm, max. workpiece weight: 200kg, max. threading height: 250mm, wire tension: 25N. Machine dimensions X/Y/Z: approx. 1650mm/2050mm/2250mm, weight: approx. 2600kg, control: Agievision. Documentation available. An on-site inspection is possible.
Excellent condition - Fully operational - Loading / Transport possible! Twin spindle Swing over bed: 530 mm Turning length: 330 mm X-Axis travel: 210 mm Z-Axis travel: 310 mm Rapid traverse: 30 m/min Spindle speed: 8000 Rpm Spindle configuration: A2-4, 5C Spindle bore: 27 mm Turret type: VDI 25 Live tool speed: max. 6000 Rpm Number turret positions: 16 Control: GE Fanuc Series 18i-TB Incl various tool holders a.o. 6x driven toolholders Note! No tooling Bar Feeder: BARLOAD Type: Hydrafeed BA 65 S/N: 16080043 Year 2009 Bar length: 1200 mm Bar diameter: 5-65 mm Bar capacity: 10 pcs (65 mm) Dimensions: 1910x1000x1250 mm Weight: 320 kg
Excellent condition - Fully operational - Loading / Transport possible! - nominal force: 500 kN - Max. eccentric load: 80 kN - Max. bending length: 2000 mm - table length: 2000 mm - table width: 60 mm - table height: 965 mm - Passage between pressing beams: 370 mm - stroke: 100 mm - Jib length: 400 mm - distance between columns: 1690 mm - Max. pressure: 31.6 Mpa - number of cylinders: 1 - oil capacity: 45 L - Motor power: 6 kW - Max. Delivery Speed: 79 mm/sec - Max. working speed: 10 mm/sec - Max. Return Stroke Speed: 80 mm/sec
Machine dimensions: approx. 3,300 × 1,800 × 1,800 mm | FEDEK DH-65L bar feeder | Bar length: approx. 1,500 mm | Bar diameter: approx. 5–65 mm | Interface: bar feeder interface available | The machine can be viewed by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale
used) | Very well maintained machine directly from the user | Machine has only run with oil | Operating hours around | FANUC 16i-T control with 9 axes | 9 axes (X / C1 / Y / E / B / A / X / C2) | Bar Ø max. 20 mm | Turning length max. 205 mm / 195mm | Main spindle, max. speed 10,000 rpm, C-axis | Counter spindle with collet chuck, max. speed 10,000 rpm, C-axis | 4-fold tool holder | 3 cross drilling units | Turret with 8 stations | Various additional tool holders, quills | parts conveyor belt | Machine coolant: oil | Loading magazine FMB Turbo 3-26 /3200/A / from Ø3- Ø26 mm | The machine can be inspected by appointment. | Changes and errors in the technical data and information as well as prior sale reserved!
used MORI SEIKI NL 2500/1250 CNC lathe, manufactured in 2006, is for sale. It is equipped with a MORI SEIKI MSX 850III / MAPPS III control system and an IRCO SIMAG loading magazine for automatic bar feeding. | Technical specifications | Control system: MORI SEIKI MSX 850III / MAPPS III | Country of origin: Japan | Type: Slant-bed CNC lathe | Centre distance: 1,250 mm | Max. turning length: 1,298 mm | Max. turning diameter: 356 mm | Standard turning diameter: 275 mm | Swivel diameter over bed: 923 mm | X-axis: 260 mm | Z-axis: 1,345 mm | Spindle speed: up to 4,000 rpm | Spindle bore: approx. 80 mm | Turret: 12-station | Number of turrets: 1 | Chip conveyor | Powered tools | C-axis | Y-axis | Machine weight: 7,600 kg | Machine dimensions: 5,000 x 2,300 x 2,400 mm | The machine can be viewed in operation by appointment. | Subject to changes and errors in the technical data and specification ...
used) | Very well maintained machine directly from the user | Machine has only run with oil | Operating hours around 69500 | FANUC 16i-T control with 9 axes | 9 axes (X / C1 / Y / E / B / A / X / C2) | Bar Ø max. 20 mm | Turning length max. 205 mm / 195mm | Main spindle, max. speed 10,000 rpm, C-axis | Counter spindle with collet chuck, max. speed 10,000 rpm, C-axis | 4-fold tool holder | 3 cross drilling units | Turret with 8 stations | Various additional tool holders, quills | parts conveyor belt | Machine coolant: oil | Loading magazine FMB Turbo 3-26 /3200/A / from Ø3- Ø26 mm | The machine can be inspected by appointment. | Changes and errors in the technical data and information as well as prior sale reserved!
Operating hours: 86760 | Technical data | - Number of axes: 5 | - Number of spindles: 2 | MAIN SPINDLE | - Max. bar diameter: 16 [mm] | - Z-axis travel: 140 [mm] | - Spindle speed: 8000 [rpm] | - Spindle drive power: 2.2 [kW] | - Number of tool positions: 13 | COUNTER SPINDLE | - Max. bar diameter: 10 [mm] | - Spindle speed: 8000 [rpm] | - Number of tool positions: 4 | FMB Turbo 3-26 bar loading magazine | The machine can be viewed by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale!
Year of manufacture: 2004. | Control: Heidenhain iTNC 530. | Technical data: | Travel distance X: 2,500 mm. | Travel distance Y: 920 mm. | Travel distance Z: 820 mm. | B-axis: x/- 105° | Work table: 3100 x 900 mm | Spindle exception: HSK 63 | Spindle speeds: 20 - 18,000 rpm | Tool changer: 30 pcs. | Equipped with: | - Chip conveyor | - Cooling via spindle 40 bar | - Operating instructions | Country of origin: Germany | Motor power: 35 KW | Machine LxWxH: 6000 x 3800 x 2950 mm | Machine weight: 25,000 kg | The machine can be viewed by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale!
Year of manufacture: 2007 | Machine type: CNC Swiss-type sliding headstock lathe | Control: Fanuc, Series 18i-TB | Power-on hours: 20,279 h | Operating hours: 67,058 h | Technical Data | Machining capacity: | Max. turning diameter: Ø 20 mm (optional up to Ø 22 mm) | Max. turning length: 205 mm | Main spindle: | Speed: up to approx. 10,000–12,000 rpm | Power: approx. 3.7–5.5 kW | C-axis | Sub-spindle: | Speed: up to approx. 6,000–8,000 rpm | C-axis | Axes configuration: | X1 / Z1 / Y1 (main machining) | X2 / Z2 (sub-spindle) | Rapid traverse: approx. 24–30 m/min | Machine dimensions & weight | Dimensions (L × W × H): 2400 × 1205 × 1700 mm | Machine weight: approx. 2,200 kg | Subject to prior sale, changes and errors in technical data and specifications excepted.
Year of manufacture: Dec. 2000 | Control: Haas | Drive type: High-speed spindle (High Efficiency) | Axis configuration: 3-axis machining | Technical Data | Travels: | X-axis: 760 mm | Y-axis: 410 mm | Z-axis: 500 mm | Spindle speed: up to 10,000 rpm | Axis Drives | X/Y/Z axes: Ball screws, precision linear guides | 3rd axis: Tilting / rotary table integrated, CNC-controlled | Tool Changer | Capacity: 20 tool positions | Taper: SK40 | Equipment | Chip conveyor | Installation Dimensions | Approx. 2,400 x 2,310 x 2,690 mm (W x D x H) | Machine weight: approx. 4,860 kg | Condition | The machine is fully operational both electrically and mechanically. | Technical documentation is included. | The machine can be inspected under power by appointment. | Subject to prior sale. All specifications are indicative and errors excepted.
maximum number of results exceeded
please refine your search
3.500 € 
