cnc hundegger used for sale

For sale Mori Seiki CNC lathe type DL-15 in good condition. Equipped with 2 x 12 positions turret and left and right spindle. Maximum speed 6,000 rpm of both spindles. Fanuc MSC-516 control. Chip conveyors and bar feeders. Still in good condition and still under power, subject to prior sale

Control Siemens 840 D Rotary diameter. [mm] 250 Turning length [mm] 650 General: Year of manufacture 2007 Control Siemens 840 D Bar passage 65 mm Turning diameter 250 mm Turning length 650 mm Main Pindel: Motor spindle technology Speed 5,000 rpm Power max. 35 kW Torque max. 370 Nm C-axis 0.001° Bar passage 65 mm Chuck Hainbuch Clamping Top Size 65 Clamping Cylinder Hollow Clamping Cylinder Sub-spindle: Motor spindle technology Speed 5,000 rpm Power 26 kW Torque 290 Nm C-axis 0.001° Chuck Hainbuch Clamping Top Size 65 Clamping Cylinders Partial Hollow Clamping Cylinders Z-axis 670 mm X-axis 175 mm Tool carrier I (X/Y/Z): Technology Tool turret, 12 stations Tool holder VDI 30 Tool drive 4,000 rpm, 11 kW, 28 Nm X-Axis 300 Y-axis 80 mm ( +/- 40 mm) Z-axis 650 mm Tool carrier II (X/Z): Technology Tool turret, 12 stations Tool holder VDI 30 Tool  ...

CNC vertical machining center Type: VF-9 D/40 HE Manufacturer: HAAS Year: 2006 Control: Haas X: 2134 mm Y: 1016 mm Z: 762 mm Table: 2134 x 914 mm Max table load: 1814 kg Max spindle speed: 10000 rpm Through spindle cooling Machine weight: 12837 kg In good condition, fully functional, under power Find more here - / Contact us at -

Travel X/Y/Z: 700mm/630mm/700mm, max. workpiece dimensions X/Y: 750mm/700mm, pallet clamping surface X/Y: 500mm/500mm, max. pallet load capacity: 500kg, tool holder: SK40, feed rate: 50m/min, rapid traverse: 50m/min, positioning accuracy: +/-0.004mm, repeatability: +/-0.001mm, spindle speed: 12000rpm. Machine dimensions X/Y/Z: approx. 4000mm/3800mm/3000mm, weight: approx. 12500kg, control: Fanuc Series 21i-MB, operating hours: approx. 42400h, spindle hours: approx. 11500h. Includes Renishaw OMP 40-2, central lubrication, and 4 pallets. Documentation available. On-site inspection possible. Expected to be available from January 2026.

Travel X/Z: 210mm/610mm, Travel Y: +/-40mm, Swing over cross slide: 360mm, Spindle bore: 65mm, Tool stations: 12, Tool holder: VDI30, Speed: 4000rpm, Rapid traverse: 24m/min, Feed force: 5000Nm. Machine dimensions X/Y/Z: approx. 4000mm/2500mm/2500mm, Weight: approx. 6000kg, Control: Siemens Sinumerik 810D, Operating hours: 4894h. Including oil cooler, parts catcher, power chuck Kitagawa BB08, collet device, turning tool holders and boring bar holders. Documentation available. An on-site inspection is possible.

turning diameter: 200 mm turning length: - mm control: DMG total power requirement: kW weight of the machine ca.: 5200 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 246 mm turning length: 445 mm control: Fanuc 32 total power requirement: kW weight of the machine ca.: 4250 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: OSP-300LA Year of Make: 2019 Distance between tips or spindle lugs: 1085 mm Circumferential diameter over carriage / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm Travel C-axis: 360 mm Travel W-axis 895 mm Main spindle speed: 45 - 5,000 rpm Sub-spindle speed: 45 - 6,000 rpm Recording: BMT Tool turret: V12 (driven) Equipment: Conveyor One touch IGF Touchsetter 2x 3-jaw chuck Sub-spindle Coolant Plant HMF-980 Suction

For sale is a Hyundai twin turret CNC lathe LM 1600 TTSY from 2023 with 1565 operating hours and 506 spindle hours., Features:, - High-performance, integrated spindle motor, - High productivity through simultaneous use of upper and lower turrets, - Robust BMT turret, - Multitasking is possible with the addition of a Y-axis to the upper turret (TTSY specifications)., - Integrated machining through synchronized control of main and counter spindles, - Design with hybrid guides: Combination of box guide (XY axis) and roller guide (Z axis), (Series LM1600/1800TT), Specifications:, - Max. turning diameter 230mm, - Max. turning length 705mm, - Main feed size 6 / Secondary feed size 6, - Drive type Built-in, - Spindle speed 6,000 rpm, - Spindle power 15/11 kW, - Spindle torque 208/140 Nm, - Travel distances (X1/X2/Z1/Z2/ZB/Y) 65/195/700/720/700/100 mm, - Rapid traverse (X1/X2/Z1/Z2/ZB/Y) 20/20/4 ...

For sale is a Hyundai twin-turret CNC lathe LM 1600 TTMS from 2023 with 1407 operating hours., and 343 spindle hours., Features:, - High-performance, integrated spindle motor, - High productivity through simultaneous use of upper and lower turrets, - Robust BMT turret, - Integrated machining through synchronized control of main and counter spindles, Specifications:, - Max. turning diameter 230mm, - Max. turning length 705mm, - Main feed size 6 / Secondary feed size 6, - Drive type Built-in, - Spindle speed 6,000 rpm, - Spindle power 15/11 kW, - Spindle torque 208/140 Nm, - Travel distances (X1/X2/Z1/Z2/ZB) 65/195/700/720/700 mm, - Rapid traverse (X1/X2/Z1/Z2/ZB) 20/20/40/40/40 m/min, - Lead type LM, - Number of tools: 2 x 12 pieces, - Tool size 20/32 mm, - Milling spindle speed 5,000 rpm, Subject to prior sale, changes and errors!

Machine name: Horizontal Machining Center Manufacturer: Hüller Hille Model: NBH 230 Machine number: A.1003260.01 Year of construction: 2009 Condition: used Functionality: Fully functional Price & Location Location: Mielec, Poland Poland Offer details Listing ID: A19275746 Reference: 60 Update: last on 02.06.2025 Description Machine designation machining center Manufacturer: Hueller Hille Model No.: NBH230 Year of construction 2009 Serial number A.1003260.01 Control system Sinumerik 840D Travel X-axis 1200 Y-axis 800 Z-Axis 1200 Tool holder HSK100 Spindle speed 10000 rpm Feed rate (X-Y-Z axis) 1-60000 mm/min Rapid traverse (X-Y-Z axis) 60m/min Rapid traverse (B-axis) 15 rpm Tool pallet 630x800mm NC rotary table 0.001 grd Cebmlewpi Ucsb Saljri Tool magazine 3 cassettes of 50 tools each Direct displacement measuring system with incr ...

Two nearly identical Maho milling machines, one with and one without a tool changer, as well as a complete range of accessories/spare parts, are available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: ISO40, quill stroke: 80mm, spindle speed: 5000rpm, feed rate: 4m/min, rapid traverse: 6m/min. Tool diameter: 130mm/100mm, max. tool length: 250mm, max. tool weight: 6kg. Machine dimensions: approx. 3150mm/3750mm/2150mm, weight: approx. 3600kg. Documentation available. On-site inspection possible.

Stama MC531 Nr.5311119 BJ. 1999 Spindle revolutions 1/min 1050 SK40 Travel ranges mm X 800 Y 400 Z 355 Number of tools Tool diameter mm Tool length mm Max. tool weight kg B Axis NC Power kVA 53 Control system Sinumerik 840D

Tripet TST201CNC nr 3520.17.137 BJ.1987

Serial Number: 6171067 Year of Make: 1986 Control: Sinumerik System 8. Spindle speed: 25-4000 rpm. Tool holder: SK40 Travel X: 630 Y: 500 Z: 550 Optical measuring system in axes X, Y, Z Axis B Mode NC 2 pallets table surface: 400x400. Interchangeable pallet system Tool magazines: 2x with 24 tools each Max tool diameter: 110mm. Max tool length: 320mm. Max tool weight: 15kg. Power supply: 380V 50Hz 36kVA.

Hiller Hille nbh110 SN 15642 Year of manufacture 1999 Spindle SK40 12000 1/min X 630mm Y 630mm Z 600mm Max. feed speed 7500mm/min Tools 36pcs Tool diameter 150/340mm (with free adjacent slots), Tool length 270mm Number of pallets 4 Pallet dimensions 400x500 Max. pallet load 600kg Axis B NC NC control Sinumerik 840D Power 69kVA

Ashine: TC800 Serial Number: 25133 Year of Make: 1986 Control: Sinumerik System 8. Tool holder: SK50 Travel X: 1600 Y: 1000 Z: 1100 Optical measuring system in axes X, Y, Z 2 pallets table area: 800x800 Interchangeable pallet system Tool magazines: 60 tools Power supply: 380V 50Hz 55kW.

Traub TNA500 SN 253 Year of manufacture 1997 Spindle 2800 1/min 12-Tool Turret It has powered tools Power 46kVA

Engine: TC800 Serial Number: 25132 Year of Make: 1986 Control: Sinumerik System 8. Tool holder: SK50 Travel X: 1600 Y: 1000 Z: 1100 Optical measuring system in axes X, Y, Z 2 pallets table area: 800x800 Interchangeable pallet system Tool magazines: 60 tools Power supply: 380V 50Hz 55kW. Legal information

turning diameter: 340 mm turning length: 600 mm turning diameter over slide: 300 mm control: Siemens 840 D spindle passage: 55 mm spindle nose: ASA 6 number of spindle speeds: 4000 U/min spindle motor: 27 kW Number of tools: 12 VDI 40 driven stations: 12 VDI 40 speed of driven tools: U/min power of driven tools: kw rapid traverse: 30 m/min Spindlespeed subspindle: U/min power sub spindle: 15 kw range L-W-H: m weight of the machine ca.: t CNC- lathe with driven tools an subspindle Driven toolstation cannot be used due to cable breakage - chip conveyor - sub spindle - driven tool stations (not working) - tool measuring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Hueller Hille Nbh 70 Serial number: 6161034.1 Year of Make: 1985 Control: Sinumerik 810 Spindle speed: 25-6000 rpm. Tool holder: SK40 Travel: X: 630 Y: 500 Z: 550 Optical measuring system in axes X, Y, Z Axis B can be rotated 1 degree each. 2 pallets table surface: 400x400. Interchangeable pallet system Tool magazines: 2x with 24 tools each Max tool diameter: 110mm. Max tool length: 320mm. Max tool weight: 15kg. Power supply: 380V 50Hz 36kVA.

Stama MC325 106 BJ1997 SN KMM3251165 Main spindle SK40 Feed speed X-Y-Z axis 1-10000mm/min Rapid traverse speed X 40000mm/min Y 45000mm/min Z 45000mm/min Tool magazine Tool diameter max 88mm Tool diameter with free neber places 100mm Tool length max 220mm Tool weight max 10kg Number of magazine slots 36 Times Chip-to-chip 2.8s Workpiece change time of pendulum table 2.8s Connection value of the compl. System 28kVA Compressed air system Supply pressure min 6bar

Travel X/Y/Z: 560mm/500mm/450mm, tool holder: SK40, speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min, table dimensions X/Y: 530mm/900mm, max. table load: 450kg. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg, control: Deckel Contour 2. An on-site inspection is possible.

Key data: 250 mm, 500 mm

Item no.: 0727 Year of Make: 1995 Equipment: Bar Feeder Sameca Chuck + Collet Chuck Various tool holders Remark: Electronics defective

Key data: 350 mm, 300 mm

Control: Okuma OSP-E100L Travel: X approx. 350 mm. Z: approx. 300 mm, maximum rotary diameter: 400 mm Item No.: 110174 Year of Make: 2004 Equipment: Conveyor Ewag infeed belt -20 positions

Mazatrol Smooth ai 5-axis simultaneous machining Max. Rotary Diameter 600 mm Max. turning length 850 mm Travel X-axis: 535 mm Y-axis: 210 mm Z-axis: 900 mm B-axis -30 to 210° Main spindle Drive power: 11 kw Max. spindle speed: 6,000 rpm Spindle Nose: A2-5 Max. bar passage: 52 mm C-axis, 0.0001° Sub-spindle Drive power: 11 kw Max. spindle speed: 6,000 rpm Spindle Nose: A2-5 C-axis, 0.0001° Milling spindle Drive power: 12 kW Max. spindle speed 12,000 rpm 38 tool positions Capto C6 Coolant system -chip management Knoll KF150/950 Compact Filter System 70 bar high pressure pump Mayfran MT10 Chip Conveyor, Right Discharge Further equipment 5 Axis Machining Package for Smooth Ai -EIA/ISO 5-axis simultaneous machining F) Tool tip control 5-axis simultaneous machining Spline Fine Interpolation 5-axis spline interpolation Path Error Suppressi ...

Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/490mm, tool holder: SK40, speed: 3150rpm, quill stroke: 100mm. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2100mm, weight: approx. 3300kg, control: Heidenhain 415, operating hours: approx. 64000h. Including coolant pump and an enclosed length measuring system LS403C. Documentation available. An on-site inspection is possible.

A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible.

A Bystronic CNC laser cutting system is available. Laser type: ByLaser 4400, laser power: 4400W, wavelength: 10.7µm, working dimensions X/Y: 3000mm/1500mm, cutting dimensions X/Y/Z: 3000mm/1500mm/170mm, positioning speed: 80m/min, simultaneous positioning speed: 113m/min, acceleration: 4.5m/s², positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. workpiece weight: 890kg, max. sheet thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm. Machine dimensions X/Y/Z: approx. 12900mm/6100mm/2100mm, weight: approx. 13500kg, laser hours: 58157h, blower hours: 93930h, pump hours: 10398h. Includes water cooling unit, without extraction. The control was completely renewed in 2025. Documentation available. An on-site inspection is possible.

pressure: 200 t chamfer lenght: 3600 mm distance between columns: 2650 mm dayligth: 500 mm throat: 300 mm stroke: 250 mm working feed: 10,5 mm/sec return speed: 100 mm/sec ram stroke speed: 150 mm/sec table height: 900 mm oil volume: 500 l total power requirement: 37 kW weight of the machine ca.: 17800 kg dimensions of the machine ca.: 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t chamfer lenght: 4100 mm distance between columns: 3100 mm dayligth: 425 mm throat: 300 mm stroke: 225 mm working feed: 10 mm/sec return speed: 100 mm/sec table height: 900 mm oil volume: 260 l total power requirement: 11 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: 4400 x 1750 x 2500 mm Equipment: - Cybelec DNC 34 PC control system - Controlled backgauge 700 mm (X-axis) - Hydraulic tool clamping at the top - 2 support arms with sliding system - Upper tool - Lower tool - Side + rear safety device - 2 manual foot switches The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 310 mm turning length: 600 mm control: Sinumerik 810 D PL Siemens turning diameter over bed: 425 mm Main spindle: turning speed range - main spindle: 500 - 4.500 min/-1 max. Torque: 280 Nm power capacity - main spindel: 16,5 kW Spindle diameter: 100 mm C-Axis: 360 ° chucking diameter: 210-52 mm spindle bearing diameter: 120 mm clamping cylinder: 65 mm Bar feed: max. 65 / (52) mm spindle nose: A8 DIN 55026 axis stroke:: x-axis: 230 mm z-axis: 740 mm rapid traverse X-axis: 15 m/min rapid traverse Z-axis: 24 m/min turret:: tool positions turret: 12 pos. driven statition: 12 pos. tool taper: VDI 30 DIN 69880 Spindle speed driven tools: 6.000 min -1 power capacity - driven tools: 3,7 kW max. Torque: 9,5 Nm tail stock: dia. of quill: MK 4 80 mm quill stroke: 120 mm tailstock adjustment: 475 mm tension force: 500 daN total power requirement: - kW weight of the machine ca. ...

CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...

A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible.

pressure: 130 t chamfer lenght: 3060 mm distance between columns: 2690 mm column arm: 410 mm stroke: 215 mm dayligth: 385 mm ajustment speed: 200 mm/sec working feed: 1-10 mm/sec return speed: 135 mm/sec table width: 120 mm table height: 1050 mm tiltable up to: +/- 10 mm Number of working hours: 53.820 h compressed air: 5.0 - 7.0 bar oil volume: 250 l operating pressure: 340 bar voltage: 400 V total power requirement: 16.0 KVA weight of the machine ca.: 11250 kg range L-W-H: 3640 x 2210 x 2375 mm - in checked condition - machine video - https://www.youtube.com/watch?v=23IbxRaZ2KA Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display tool & program library including new TFT-LCD industrial monitor - CNC controlled axes: Y1 + Y2 / X / R - CNC electro-motor / controlled back st ...

x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm table surface area: 1000 x 543 mm spindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/min feed X/Y/Z-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min table load: max. 350 kg control: HEIDENHAIN MillPlus milling-head swivable +/-: 90 ° total power requirement: 26 kVA weight of the machine ca.: 4,2 t dimensions of machine L x W x H: 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

From a current recycling we offer you a well-maintained CNC lathe MIYANO BNE-65MYY incl. FMB bar feeder SL 80 V. Year of construction:2023 Condition: good Asking price: 180.000,00 VHB Original price: 284.000,00 Location: 78628 Rottweil Equipment / accessories / other information: See appendix Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. The sale is without warranty Subject to prior sale

turning diameter: 475 / 260 mm turning length: 1000 mm control: Heidenhain Manual Plus turret head: 12 x VDI 30 total power requirement: 25 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,51,52 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 , 1500 , 3000

1. Employs world-leading fiber lasers with a fixed optical path design, eliminating optical path maintenance, reducing operating costs, and ensuring high cutting quality and processing efficiency. 2. The machine tool adopts a gantry structure with a rack and pinion dual servo drive structure, achieving a maximum acceleration of 0.8G, ensuring high-speed and high-precision operation. 3. Stable optical path and control systems that are simple to learn and operate. 4.Uses top-brand fiber lasers, resulting in excellent beam quality, stable output power, and precise cutting.

Milling machine from Reckermann: TYPE: DELTA1300 K X(Longitudinal)/Y(Transverse)/Z(Vertical): 1500x 500x 450 mm Tool holder DIN 2080: SK50 Works flawlessly

2 pieces (identical) used lathes Turning center milling center INDEX R200 INDEX VirtualLine Year of construction 2011 and year of construction 2009 At that time, the original price of both machines together: €1,385,647.90 gross Regular service only from the manufacturer INDEX. Service and parts exchange alone between 17.04. and 05.08.2025 in the amount of € 96,305.41 (invoices are available for inspection). Therefore, the machines are in absolutely excellent condition. Spindle hours (as of 21.11.2025) Year of construction 2011: S1: 4,114 h S2: 3,064 h S3: 2,535 h S5: 4,170 h Spindle hours (as of 21.11.2025) Year of construction 2009: S1: 2,951 h S2: 953 h S3: 3,524 h S5: 5,990 h Turning-milling centre with roller bearing slide guides Work spindles can be moved on slides. Tool carrier integrated into recesses in the machine bed, all linear axes arranged at  ...

Milling machine Deckel FP4 NC BJ 1987 Specifications •Travel: o X-axis: 560 mm o Y-axis: 500 mm o Z-axis: 410 mm • Includes tool cabinet and various tools (see photo)

Key data: 650 mm, 1500 mm

Year of construction 2014, commissioning 2017 OSP P300S Controller Travel: X1/X2 axle: 695/235 mm Y-axis: 300 mm Z1/Z2 axle: 1,600/1,461 mm B-axis: -30° to +210° Max. turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11, max. speed: 3,000 rpm, Max. torque: 955 Nm, bore 112 mm Hollow Clamping Cylinder SMW VNK320-127, Bore 127 mm 3-jaw chuck Forkardt 3QLK 315-88 Z11 Pressure reducing valve 8-70 bar Milling spindle 22 kW, max. speed: 12,000 rpm Tool magazine with 40 tool positions, HSK-A63 Lower turret with 12 tool stations Self-centered bezel on the lower turret Hydraulic bezel SMW SLU-X-3.2-ZS, clamping range: 50-200 mm Programmable tailstock Renishaw RMP Probes Drum trough filter TMF300 with 980 L tank 8 bar circulation pump 70 bar high pressure pump Hinge belt chip conveyor Tool monitoring system for tool life and breakage Tool measur ...

Key data: 820 mm, 3000 mm

Smooth X Control Max. turning diameter: 820 mm Travel: X/Y/Z/Tailstock: 870/500/3,122/2,990 mm B: -30° to +210° (0.0001°) Main spindle Drive power: 30 kW Max. speed: 3,300 rpm Max. torque: 3,100 Nm Spindle nose A2-11 Spy bore: 104 mm Milling spindle Drive power: 37 kW Milling spindle max. speed: 10,000 rpm Tool magazine 40 tool positions Capto C8 Programmable NC tailstock MK5 - Tailstock forward/back via footswitch - Tailstock extension 150 mm Hydraulic bezel, SMW Autoblok type RX5 - Max. clamping range: 430 mm Automatic opening/closing of the clamping jaws Clamping force regulation high/low (via M-code) 3-jaw chuck Schunk 500 mm Cooling with air through the rotating milling spindle Cooling by the spindle 70 bar Mayfran Concep 2000II Coolant System - Double switching filter - 70 bar high-pressure pump - 3 pressure levels - Hinged belt chip conveyor Maz ...

CNC controller: BROTHER Axes X-axis travel mm: 450 Y-axis travel mm: 320 Z-axis travel mm: 410 Worktable Table dimensions mm: 550x350 Spindle Spindle speed rpm: 12000 Tool system Tool holder: BT-30 Tool magazine slots: 26

CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cabin 54 pallet Storage Gressel (ø340 x 348mm x 89kg ) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operatin ...

gemotoriseerde X as Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 600 mm Max travel Z-axe: 600 mm Max height workpiece: 600 mm Power on spindle: 3 kW Table size: 900 x 250 mm

Inv. Num. : 8820 Type: MINI-88 Y Producer: POLY GIM Created: 2007 Parameters: Control System: MITSUBISHI Max. turning diameter: 25 mm Maximum length of travel in the X-axis: 165 mm Maximum length of travel in the Y-axis: 148 mm Maximum feed in the Z-axis: 150 mm Maximum spindle speed: 6000 1/min Spindle bore: 34 mm Max. rod diameter: 26 mm Length: 1200 mm Width: 1000 mm Height: 1500 mm Weight: 1058 kg Equipment: Conveyor Y-axis Bar Feeder FEDEK STM-326

Lathe Weipert

Universal CNC lathe INDEX G 400 RATIO Line Hersteller [manufacturer]: INDEX Type [ type]: G 400 Control unit: Siemens C200-4D incl. milling of cylindrical tracks Incl. handwheel Baujahr[construction year]: 10/2004 Turning length 1250 Main spindle D102 with swing-in gear 1700 Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE TOOL CARRIER 1 COMPL. AXES X,Y,Z,B with turning/milling operation Disc turret VDI40 10 stations MILLING SPINDLE HSK A63 Tool carrier axles 2 XZ Disc turret VDI40 10 stations SUB-SPINDLE D102 DIRECT DRIVE 1300Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE DISC MAGAZINE ON THE LEFT OF THE HSK63 SINGLE-SWING GEARBOX WITH 32 TOOL HOLDERS DISC MAGAZINE RIGHT COMPL. M.32 TOOL HOLDERS HSK 63A Travel path: X= 320mm Z=1250mm Displacement measuring system X-axis glass mast. (abs) Fe ...