cnc horizontal used for sale

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

Working field: axis x: 3200 mm, axis y: 944 mm, axis z: 110mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill holder: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 24 horizontal spindles in X, 10 vertical spindles in X line Working pressure air pressure: 6 bar Installed power: max 25 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit

equipped with manual crowning and 1 set of flatbed tools; Recently equipped with new control and laser security Auction-ID: A1-45793-27

Working area: X 5200 x Y 1260 mm Heading of main spindle: X 5709 mm, Y 1650 mm 8 workpiece consoles Equipment: Drilling unit with 18 spindles, 12 vertical sp?ndles, 6 horizontal spindles (4 in direction X , 2 in direction Y ) Grooving saw Milling motor 11 kW, 20000 rpm max, HSK-F 63 take-up, liquid-cooled, 5-axis controlled Tool changer with 16 positions Laterally positioned changer with 8 positions PC control

Including various tools; Auction-ID: A1-45793-23

Hydraulic unit and CNC control for Voortman drill Auction-ID: A1-45793-107

Equipped with new control and laser protection from PILZ; including 1 set of tools with 2 V die sizes Auction-ID: A1-45793-16

excl. tools; equipped with Heidenhain CNC control; machine works well but has little play on the X axis Auction-ID: A1-45793-12

Exclusive tools Auction-ID: A1-45793-29

Excluding clamps and tools, including cooling system Auction-ID: A1-45793-20

Includes various tools Auction-ID: A1-45793-9

excluding tooling; including 4th axle; equipped with updated 2018 CNC control with touch screen and software Auction-ID: A1-45793-14

equipped with Delem CNC control and Wila hydraulic top clamping; Exclusive tools Auction-ID: A1-45793-8

incl piece of feed conveyor and extra hydraulic bundle clamp Auction-ID: A1-45793-10

Includes 1 set of tools; equipped with automatic upper and lower clamping; Auction-ID: A1-45793-26

including 1 set of tooling Auction-ID: A1-45793-17

12-fold VDI tool changer with interchangeable holders (excl. tools) Auction-ID: A1-45793-3

AMADA LCG 3015 AJ fiber laser was built in 2016 in Japan by Amada Co., Ltd. It is an extremely versatile machine designed for precision machining of a wide range of materials, i.e. structural steel, stainless steel, aluminium, brass and copper. It is distinguished by the use of state-of-the-art components and a robust design that maintains stability during even the most demanding challenges. The sheet metal cutting process is performed by means of fibre optic technology, which offers many advantages over traditional cutting methods. The use of this technology in production makes it possible to quickly cut complex shapes with the highest precision and accuracy. It is also distinguished by its high energy efficiency, which results in lower energy consumption and a significant reduction in operating costs. The AMADA LCG-3015 AJ is equipped with a reliable cutting head with an efficien ...

HAAS ST-30 CNC turning center was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, distinguished by its high reliability and precision, is perfect for both unit and series production. It is capable of performing a number of complex operations, such as precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, rotates at a maximum speed of 2400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. To guarantee maximum machining precision, each tool taken from the 12-position turret is continuously measured and calibrated by a measuring probe. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 feat ...

HAAS ST-30 CNC lathe was built in 2018 in the United States by HAAS AUTOMATION, INC. The machine on offer is an excellent choice for both unit and series production. It is capable of performing a number of complex operations, i.e. precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, reaches a maximum speed of 3400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. Tools taken from the 12-position turret are continuously measured and calibrated to guarantee maximum machining precision. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 is distinguished by its compact design, engineered with extreme rigidity and  ...

Machine is equipped with: - chip conveyor - renishaw probe system Auction-ID: A1-45752-13

The machine is in good technical condition, after prior agreement it is possible to test it. approx. 3000 hours of TRIPS 550X400

Turning length 1.545 mm Turning diameter 500 mm (710mm) X-axis 690 mm Y-axis 230 mm Z-axis 1550 mm B-axis 225° C-axis 360° (0.001°) W-axis 1550 mm Spindle Bore Ø 98 mm R.P.M. 36x 30-3000 KW 30/22 Tapid traverse 26 – 40 m/min Auction-ID: A1-45737-1

Make BURGSMÜLLER Model VIWM 800-CNC Mach. No. 2000/4533 Year of Manufacture 7/2000 Control SIEMENS SINUMERIK 840D Chuck Dia. ø 500 mm Max. Dia. ø 840 mm Spindle Bore 70 mm Max. Height over Bed 415 mm Max. Height over Cross Slide 185 mm R.P.M. Stepless 0 - 100 kW 8,5 Max. Load 700 kg Milling Spindle: kW 12 Max. Load 800 – 3,200 200-800 Taper QSP 50/2500 IK Including: Tool Changer 10 pos. Chip Conveyor Auction-ID: A1-45737-6

CNC UNIVERSAL MILLING MACHINE Inv. No. 13.165J1 Make MIKRON Model WF 31DCM Machine No. Control HEIDENHAIN TNC 155 Table dimensions 460 x 800 mm Longitudinal travel (X) 560 mm Cross travel(Y) 500 mm Vertical travel (Z) 400 mm R.P.M. 40 – 4000 Rapid traverse X-Y 4000 mm/min Rapid traverse Z 3500 mm/min Quill travel 90 mm kW total power 10 kW drive power 3.3 / 4 Machine weight 2540 kg Auction-ID: A1-45737-177

CNC LATHE WITH SUBSPINDLE AND Y-AXIS Inv. No. 13.032C1 Make MAZAK Model SQT250MSY Control T-PLUS Center distance 495 mm Max. swing over bed Ø 525 mm Max. swing over cross slide Ø 350 mm Spindle bore Ø 64 mm R.P.M. 35 – 4,000 (16x) kW 18 Volts 380 Cycles 50 Including: 12 pos. A.T.C.(driven tools) Hydraulic chuck Ø250mm Auction-ID: A1-45737-9

CNC MILLING MACHINE Inv. No. 13.112J1 Make HO-CHUN Type UH-1250A Mach.no. 5123 Control HEIDENHAIN TNC 360 Table 400 x 1,800 mm Longitudinal Travel (X) 1,250 mm Cross Travel (Y) 540 mm Vertical Travel (Z) 470 mm Spindle BT 50 R.P.M. 275 – 2.000 KW 7 Volts 380 Cycles 50 Auction-ID: A1-45737-173

CNC – Transl. Machining Centre Inv. No. 10.653MM Make UNISIGN Model Univers 4 Control Siemens Sinumerik 810D Travel X (Longitidinal) 1,600 mm Y (Cross) 400 mm Z (Spindle Height) 400 mm Taper ISO 40 Table 700 x 400 mm Load 600 kg Distance Spindle Nose to Table 150-550 mm R.P.M. 9.000 Main spindle kW 14 Rapid Traverse X,Y,Z 5-28,000 mm/min. Feed rate X,Y,Z 28,000 mm/min. A.T.C. 44 pos. Auction-ID: A1-45737-100

CNC LATHE Inv. No. 13.016C1 Make MAZAK Model QUICKTURN 20N Control MAZATROL CAM TZ Center distance 1.037 mm Max. swing over bed Ø 510 mm Max. swing over cross slide Ø 310 mm Spindle bore Ø 80 mm R.P.M. 12 – 3,000 kW 18.5 Volts 380 Cycles 50 Including: 8 pos. A.T.C. Auction-ID: A1-45737-127

An optical CNC 3D coordinate measuring machine Keyence is available. Display resolution: 0.1µm, repeatability: 2µm, measurement accuracy: +/-10µm, low magnification: 300mm/200mm, high magnification: 70mm/50mm, max. load capacity: 20kg, weight: approx. 30kg. Documentation available. An on-site inspection is possible.

Design: gantry design, measuring range X/Y/Z: 850mm/1200mm/600mm, measuring accuracy: 2.5µm/L250, repeatability: +/-3µm, machine weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

Auction-ID: A1-46045-118

This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 3000 mm on the X-axis and 1500 mm on the Y-axis. Contact us for more information about this machine.

CNC shearing machine manufactured in 2022. This Metallkraft MTBS 2100-40 B features a cutting length of 2100 mm and a motor power of 7.5 kW. It can handle a maximum sheet thickness of 4 mm at 400 N/mm². If you are looking to get high-quality shearing capabilities, consider the Metallkraft MTBS 2100-40 B machine we have for sale. Contact us for further details.

With extraction; Suction line to the valve Auction-ID: A1-43429-17

This 3-axis SCM Accord 20 CNC router was manufactured in 2010. It features a working area with dimensions of 4250 mm in the X-axis and 2280 mm in the Y-axis, making it suitable for nesting production and wood processing. The machine includes a powerful electrospindle with a speed range of 600 to 24,000 rpm and a side tool magazine with 10 positions. If you are looking to get high-quality milling capabilities, consider the SCM Accord 20 CNC router we have for sale. Contact us for further details.

This 3-axis PELCO MECCANICA CLOUD was manufactured in 2015. It features a working area of 2000 × 1000 mm and a Z-axis travel of 250 mm. The machine is equipped with a 12-position tool changer and an electrospindle speed ranging from 2000 to 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the PELCO MECCANICA CLOUD CNC router we have for sale. Contact us for further details.

Reading hours: approx. 67,741 h (machine) / approx. 21,617 h (spindle) Equipped with: 60-fold tool change magazine, (1x) chip conveyor (2017), (1x) cooling/filter unit with pumps and control cabinet, oil mist separator. Auction-ID: A1-45979-2

This 4-axis HUNDEGGER K2 was manufactured in 2002, designed for efficient wood beam processing. It features a loading area with motorized chains, a maximum beam length of 13,500 mm, and a working section up to 440 mm × 240 mm. Includes a circular saw and universal milling unit, both with 4 axes, alongside versatile drilling units. Ideal for complex woodworking tasks. Contact us for more information about this machine.

Maximum tool weight: 7kg, Maximum tool length: 300mm. Equipped with: (1x) 16-way tool changer, (1x) chip conveyor, (1x) cooling/filter unit, (1x) spindle cooler, (1x) external cooling unit. Auction-ID: A1-45979-4

This 4-axis IMA BIMA 410 CNC Wood Machining Centre was manufactured in 2000. It features a working area of 3000 mm in X and 1200 mm in Y, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 410 machine we have for sale. Contact us for further details.

Reading hours: approx. 66.283 h (machine) / approx. 21.312 h (spindle) Equipped with: 60-fold tool change magazine, (1x) chip conveyor (2017), (1x) cooling/filter unit with pumps and control cabinet, oil mist separator. Auction-ID: A1-45979-3

This 3-axis SCM TECH Z25 PLUS H-R4 was manufactured in 2005. It features a working area of 2500 x 1000 mm and a travel range of 2980 mm on the X-axis, 1280 mm on the Y-axis, and 200 mm on the Z-axis. The machine is equipped with 16 spindles operating at 4000 rpm and an electric spindle with a maximum speed of 18,000 rpm. If you are looking to get high-quality CNC processing capabilities, consider the SCM TECH Z25 PLUS H-R4 machine we have for sale. Contact us for further details.

CNC lathe Type: Lynx 220 Manufacturer: Doosan Year: 2012 Control: Fanuc i Series Spindle hours: 1743 Max. turning diameter: 320 mm X: 175 mm Z: 330 mm Spindle speed: 5000 rpm Turret: 12 positions Tailstock Chip conveyor Tool probe Part catcher Machine in good condition, fully functional, under power Find more here - / Contact us at -

5-axis CNC machining center Type: DMU 50 eco Manufacturer: DMG Year: 2009 Control: Siemens Sinumerik 810D+ShopMill X: 500 mm Y: 450 mm Z: 400 mm B: +110°/-5° C: 360° Max spindle speed: 8.000 rpm Spindle taper: SK40 Tool magazine: 12 positions Probe DMG TS 649 Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC tube banding machine Type: ELECT 52 Manufacturer: BLM Year: 2016 Fully electric dual-direction tube bending machine (9-axis) Control: Siemens SIMOTION Cycle hour counter: 7344 Number of parts produced: 5143 Mandrel rod set length: 4.2 m + extension of usable length to 4.5 m 3D visual programming system (VGP3D) – software for 3D graphical programming with feasibility analysis and bending process optimization B-RIGHT – automatic springback and elongation correction BOOSTER 20 – pushing booster with 2000 kg force Machine toolings: bending tools for tubes: Ø17.2 (r-68.6 mm) fixed and variable radius + collet (pinza) + clamping plate + adapters + mandrel Ø21.3 (r-70.7 mm) fixed and variable radius + collet (pinza) + clamping plate + adapters Ø26.9 (r-83.5 mm) fixed and variable radius + collet (pinza) + clamping plate + adapters + mandrel Ø33.7 (r-107 mm) fixed  ...

A double-turret and double-spindle turning center Biglia including peripherals is available. Spindle power: 11kW/11kW, speed: 7000rpm, bar capacity: 36mm-37.5mm, max. turning diameter: 100mm, max. turning length: 140mm, tool stations: 2×12, Y-axis travel: +/-25mm, X/Z-axis travel: 85mm/300mm, rapid traverse: 15m/min, machine dimensions X/Y/Z: approx. 3700mm/1450mm/1900mm, weight: approx. 5000kg, control: Mitsubishi M730 with editor, power-on hours: approx. 47000h. Including FMB turbo 3-36 bar loader, Knoll KF10 coolant system, 700l tank, air cleaning unit and an extensive package of collets and tools. Documentation available. An on-site inspection is possible. Expected to be available starting October 2026.

MAZAK MTV 414 CNC vertical machining center was built in 1992 in the United Kingdom by YAMAZAKI MACHINERY UK LTD. The offered machine is an excellent choice for machining workpieces with a maximum weight of 500 kg. Thanks to its reliable components and extremely rigid design, the MAZAK MTV 414 guarantees the best machining results throughout its service life. The machining process is performed inside a large work area with a work table with a length of 900 mm and a width of 410 mm, a spindle and a capacious tool magazine. The spindle, driven by a powerful motor, rotates at a maximum speed of 7000 rpm and operates in three X,Y,Z axes with feeds of 560 mm, 410 mm and 460 mm respectively. All cutting tools are stored in a 24-position tool magazine with an automatic tool changing system (ATC). All this is complemented by the intelligent MAZATROL M32B CNC controller with its intuitive interfa ...