cnc horizontal used for sale

Key data: 650 mm, 1500 mm

Double Spindle 5-Axis/7-Axis CNC Double Spindle Turning and Milling Center Okuma Multus U3000 1SW 1500 Year of construction 2021 OSP P300SA IGF-D CNC Controller Circumferential diameter over carriage 650 mm Turning diameter max. 1,500 mm Main spindle: Spindle bore 91 mm Spindle drive power 15/22 kW Spindle speeds max. 4,200 rpm. Chuck diameter 250 mm C-axis 0.0001° Sub-spindle: Spindle bore 91 mm Spindle drive power 15/22 kW Spindle speeds max. 4,200 rpm. Chuck diameter 250 mm C-axis 0.0001° Tool support: Single tool carrier in the work area Tools for turning (L) and milling (M) CAPTO C6 Tool Holder Milling spindle drive power 19/25 kW Milling spindle speeds 50 – 12,000 rpm. Tool magazine and automatic tool changer 80 tool magazine positions Axes/travels: Flat path X 645 mm Perpendicular travel (off-center) 250 mm Longitudinal travel Z 1,600 m ...

Adige LT5 Fiber with 6.5m bundler loader and 4.5m discharge equipped as follows: 4.5m finished parts collection table Rear scrap conveyor 1KW IPG fiber laser Chiller Extractor Weld seam detector

A 3-axis milling machine is offered. Travels X/Y/Z: 1016mm/610mm/760mm, tool changer: 24 positions, spindle: prepared for external cooling unit. Accessories: recooling unit Rehsler TAE evo M, Renishaw measuring system, inspection by appointment possible.

X-axis: 425mm, Y-axis: 400mm, Z-axis: 240mm, Spindle speed: 42000rpm, Probe: Renishaw, Number of tools: 40, Spindle interface: HSK40, with paper filter. An on-site inspection is possible.

X-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24000rpm, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle taper: HSK 40, total connected load: 85kVA, weight: 33t, with paper filter. an on-site inspection is possible.

Main spindle: Technology: Motor spindle Speed: 4,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar Passage: 76 mm Sub-spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Ejector: Pneumatic Travel in Z: 800 mm Tool carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Tool drive: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 260/100/800 mm Rapid traverse in X/Y/Z: 30/12/30 m/min Tool carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Tool drive: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 210/800 mm Rapid traverse in X/Z: 30 m/min Equipment/accessories: Chip management: Chip conveyor Coolant management: IKZ system with paper belt filter and high pressure, 40 bar Raw material feed I: Robot interface prepared Raw Material Feed II: Bar Feeder Interface Prepared Finished part removal ...

This 5-axis BIESSE Rover A 1242 was manufactured in 2021. It features a working range of 4140 mm in the X-axis, 1270 mm in the Y-axis, and 275 mm in the Z-axis. The machine is equipped with brushless motors and a PC-based control system for enhanced performance. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE Rover A 1242 machine we have for sale. Contact us for further details.

A deposit of €180.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-4

This 6-axis BACCI TWIN CNC Wood Machining Centre was manufactured in 2001. It features an impressive X-axis travel of 3400 mm, Y-axis travel of 1500 mm, and Z-axis travel of 1000 mm. The machine is equipped with 4 milling heads that can reach speeds of up to 24,000 rpm and includes 2 tables and 2 vacuum units. If you are looking to get high-quality wood machining capabilities, consider the BACCI TWIN machine we have for sale. Contact us for further details.

In order to submit a bid on this lot, a deposit of €1300.00 is required. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-9

A vertical CNC 5-axis machining center POS is available. Travel X/Y/Z: 670mm/820mm/600mm, rotary table diameter: 800mm, max. table load: 1200kg, tool positions: 96, tool holder: HSK-63, speed: 18000rpm, A-axis: -100°/120°, C-axis: 360°, weight: approx. 20000kg, control: Heidenhain, operating hours: 22177h, spindle hours: 9601h. Including infrared probe, IKZ and Blum laser tool measurement. Documentation available. An on-site inspection is possible.

A vertical CNC 3-axis gantry machining center POS is available. Travel X/Y/Z: 2050mm/1050mm/780mm, table dimensions X/Y: 2200mm/1000mm, max. table load: 3000kg, tool holder: HSK-63, tool stations: 60, speed: 18000rpm, rapid traverse: 30m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 6500mm/4200mm/3800mm, weight: approx. 20000kg, control: Heidenhain, spindle hours: 10375h. Including infrared probe, IKZ and Blum tool measurement. Documentation available. An on-site inspection is possible.

Key data: 254 mm, 500 mm, 3600 1/min

Stock No.: 3967 CNC LATHE Manuf.: HYUNDAI, Type: HIT 18S Serial No.: 34156066, Build: 1998 Specifications: Max. Turning diameter 254 mm dia. Turning Length 500 mm Main motor power 15 kw Main Spindle speed Range 3600 rpm Spindle bore 75 mm dia. X Axis Stroke 180 mm Z Axis Stroke 510 mm Turret 1 with 8 Stations Control system Siemens 840C manuf. Controlled in X-Z axis Accessories: Hydr. Chuck Mainspindle mm dia Various toolposts. Chip conveyor. Tailstock Whtitout Length: 2650 mm, Height: 1900 mm, Width: 1700 mm, Weight: 4300 kg

Inv. Num. : 8996 Type: KIT 450 Producer: HYUNDAI-KIA Created: 2008 Parameters: Control System: FANUC Series Oi-TC Switch-on hours: 54066 h Hours: 23954 h Max. turning length: 190 mm Max. turning diameter: 165 mm Maximum turning diameter over bed: 530 mm Maximum length of travel in the X-axis: 400 mm Maximum feed in the Z-axis: 250 mm Spindle speeds: 6000 1/min Max. rod diameter: 44 mm Spindle diameter: 52 mm Weight: 2700 kg Equipment: Bar Feeder

Manufacturer: Weeke Model: Optimat BHC Venture 1 Year of Manufacture: 2006 Operating Hours: 20000h Electrical: - Power Supply: 400V / 50 Hz / 3-phase + N - Total Power: 18 kW - Current: 35 A - Control Voltage: 24V Find more here - / Contact us at -

Inv. Num. : 9001 Type: E-30160 Producer: DURMA Created: 2006 Parameters: Control system: DNC 60 hp Compressive force: 160 t Maximum bending length: 3050 mm Weight of the upper tool: 40 kg Reduce tool weight: 55 kg Stroke: 200 mm Machine height: 2700 mm Machine length: 4200 mm Machine width: 2100 mm Machine weight: 9820 kg

Inv. Num. : 8997 Type: SKT 100 Producer: KIA Created: 2006 Parameters: Control System: FANUC Series Oi-TB Switch-on hours: 65471 h Hours: 19209 h Max. turning length: 300 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum length of travel in the X-axis: 210 mm Maximum feed in the Z-axis: 330 mm Maximum spindle speed: 6000 1/min Spindle taper: Morse 4 Max. rod diameter: 45 mm Lathe chuck diameter: 165 mm Weight: 3800 kg

A CO2 laser cutting and marking machine Eurolaser, which was used for acrylic glass, is available. Laser power: 200W, working dimensions X/Y: 2270mm/1600mm, max. cutting width: 2200mm, material feed width: 2350mm, table feed-through height range: 58mm-80mm, engraving resolution: 1200dpi, grayscale levels: 256, material processing: films/textiles/plastics/composite materials/paper/thin wood. Machine dimensions X/Y/Z: approx. 4000mm/2350mm/1600mm, weight: approx. 2000kg. The laser source was renewed in 2021. Documentation available. An on-site inspection is possible.

Used machine HSC70 linear Machine Type: CNC 5-Axis Milling Center Model: HSC70 linear Manufacturer: DECKEL MAHO Control:3D control Heidenhain TNC 640 Year of Make: 2016 #001347 Equipment: - Spindle speed up to 28,000 rpm - Production package 980I with ICZ and temperature control 01 - Rinsing gun for swarf rinsing - Electronic handwheel - Tropical Pack This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Vertical machining center Machine type: DMG DMC 635 V/P Control: Heidenhain iTNC 530 Year of Make: 2013 TECHNICAL DATA: Travels: X-axis: [mm] 635 Y-axis: [mm] 510 Z-axis: [mm] 460 Speed range: [1/min.] 10,000 Tool holder: SK 40 Tool Changer Tool positions: 30 Pallet system Number of pallets: 2 Table size: [mm] 560 x 790 Features: No internal cooling (IKZ) Electronic handwheel Probe TS649 Tool breakage detection table switches Chip rinsing gun This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible.

The machine is in good technical condition, after prior agreement it is possible to test it. We offer the grinder separately, without extraction and track. For straight round or oval pipes.

Control Winmax Turning diameter 335 mm Turning length 550 mm Spindle speed 3000 rpm Tailstock 12-Station Turret with Driven Tools VDI 40 Chip Conveyor, IRCO Short Bar Feeder IRS-RBK 1001 Tool Measurement Parts catcher

The machine is in good technical condition, testing is possible by prior arrangement.

Key data: 5 t, 350 mm, 310 mm

Small Electric Table Press Brake with Spindle Drive TableOne 5 - CoastOne Made in Finland Press force: 5T Bending Length: 350mm Spindles: 1x5T Control: TC15-2D Graphics Back gauge: 1 axis controlled X axis - R axis manual Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; Available now! Viewing under power possible at any time by appointment!

CONTROLS   CNC controls MAZATROL 640 T NEXUS WORKING RANGE TURNING   turning diameter (max): 380 mm   bar diameter (max): 65 mm   worpiece length max.: 575 mm MAIN SPINDLE   spindle revolutions (max): 5000 /min   drive power: 26 kW COUNTER SPINDLE   spindle revolutions (max): 6000 /min   drive power: 11 kW X/Z SLIDE   Z-axis travel: 575 mm   X-axis travel: 230 mm   Y-axis travel: 585 mm   number of tool positions (total): 12   - rotation speeds (max): 4500 /min   - drive power: 5.5 kW Additional options• Kitagawa BB-08 3-jaw chuck• Kitagawa B-206 3-jaw chuck• Parts catcher• Interface for bar feeder• Tool holder package, including driven holders• Coolant pump• Chip conveyor

The machine is in good technical condition, after prior agreement it is possible to test it. Control unit Hurco Max Turning diameter 254 mm Turning length 340 mm Range over bed 405 mm Range over cross feed 230 mm Length between centers 403 mm Bar capacity 45 mm X-axis movement 177 mm Z-axis movement 355 mm Spindle speed 6000 rpm. Motor power 11 kW

CNC travelling column milling machine with turntable concept used for machining CFRP components, suitable for machining plastic, CFRP and aluminium. Control Siemens 840D sl. Machine with complete enclosure with loading gate. Milling spindle 15 kW with max. 24000 1/min. 5-axis milling head S2 for aluminium profile machining CFRP and plastic. Tool holder HSK63F. Pick u-Up tool changer for 12 tools. Traversing axes X,Y,Z,A,B,C. Table swivel beam 180° rotatable (A-axis) with zero clamping system arranged on both sides to accommodate the workpiece clamping device. Dimensions table or swivel beam 3200 x 1200 mm. 8 zero-point clamping systems on each side of the table. Chip transport via belt conveyor. Dust extraction via compact dust extractor Tonga BG 32/ST/36ST. Lubrication system Vogel. Workpiece clamping via vacuum. Vacuum generator Schmalz. Very good condition available from June 2026. T ...

Travel X/Y/Z: 1600mm/400mm/425mm, table dimensions X/Y: 2000mm/400mm, max. table load: 350kg, tool positions: 12, tool holder: SK30, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2800mm, weight: approx. 5000kg, control: Siemens Sinumerik. The hoses, the Y-axis cover, and the battery (data loss) are in need of repair. An on-site inspection is possible.

6 x tensioning tower 680 height, 360 x 360 at the foot with Starrack Heckert pallet 400 x 400

Type of press: 2-cylinder synchronized press, pressing force: 125t, rated pressing force: 110t, bending length: 3000mm, ram stroke: 360mm, installation height: 540mm, distance between frames: 2550mm, hydraulic pressure: 256bar, weight: approx. 12000kg, control system: Cybelec DNC 7000 Graphic. Including various tools. The control system and the screen were renewed in mid/late 2025. An on-site inspection is possible.

Manufacturer NICOLAS CORREA Model RAPID50 Year of Manufacture 2.005 CNC HEIDENHAIN 530 HSCI Table Table surface 5,000 x 2,000 mm Number of slots T 11 Slot size T 22 mm Maximum weight on the table 30,000 kg. Routes and advances Longitudinal Course (X-Axis) 5,000 mm Transverse Course (Y-Axis) 3,100 mm Vertical Course (Z Axis) 1,200 mm Distance between columns 2,800 mm. Fast Forward Axles (X) 20,000 mm/min Fast Forward Axles (Y, Z) 30,000 mm/min Head UAD II automatic head included UAD II head positioning 0.1º / 0. 1st Speed 6,000 rpm No. of ranges 2 Power 32 kW ISO 50 head cone Hydraulic head clamping Head 2 – vertical chuck INCLUDED Accessories Automatic tool loader INCLUDED Loader positions 30 Automatic head changer INCLUDED 2 longitudinal chip evacuators INCLUDED 1 x Cross Chip Evacuator INCLUDED Internal cooling 20 bar INCLUDED Portable electronic  ...

CATEGORY — 5 Axis MANUFACTURER — DMG MORI MODEL — DMU 85 MONOBLOCK STOCK NUMBER — ONY100000587 MODEL YEAR — 2013 CONTROL PANEL — SIEMENS 840 D SOLUTIONLINE AXIS STROKE — X 935 MM / Y 850 MM / Z 650 MM ROTARY AXIS MOVEMENTS — A +/- 120 ° / C 360 ° SPINDLE SPEED — 18.000 MIN/-1 POWER CAPACITY-MAIN SPINDLE — 35 kW (40% ED) MAX. TORQUE — 135 Nm (40% ED) TOOL HOLDERS — SK 40 NUMBER OF TOOLPOSITIONS — 30 TABLE SURFACE AREA — 1.000 X 750 MM ( d 850 X 750 MM) MAX. TABLE LOAD — 1.000 KG TOTAL POWER REQUIREMENT — 46 KVA WEIGHT OF THE MACHINE — 13.500 KG DIMENSIONS OF THE MACHINE — 3.15 X 3.92 X 3.21 M

CNC vertical machining center Type: U 630 T Manufacturer: Hermle Year: 2001 Control: Heidenhain TNC 426 X: 630 mm Y: 500 mm Z: 500 mm Max spindle speed: 7000 rpm Spindle motor: 7,5 kW Spindle taper: ISO 40 Table: 900 x 528 mm Max table load: 400 kg Machine weight: 4800 kg Tool probe: Heidenhain TS 220 Documentation Machine in good condition, fully functional, under power. Find more here - / Contact us at -

Control: FANUC Series O-M, with tool magazine, coolant system, central lubrication, electrical cabinet, air conditioning unit and spindle oil cooler HARBOR OILCON HBO-250 PT, year of manufacture: 1991. An on-site inspection is possible.

A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible.

Number of axes: 3, control: Fanuc OMA, operating hours: 4708h, with tool magazine. An on-site inspection is possible.

Connected load: 10kW, control: FANUC Series 0-T, machine type: slant bed lathe. With transformer, hydraulic unit and electrical cabinet with main switch. An on-site inspection is possible.

Inv. Num. : 9029 Type: TURN E65 Producer: EMCO Created: 2008 Parameters: Control system: FANUC Max. turning diameter: 500 mm Maximum turning diameter over bed: 610 mm Maximum length of travel in the X-axis: 210 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 610 mm Weight: 6500 kg

Saw band length: 3010mm, cutting diameter: 270mm, table height: 950mm, connected load: 2.2kW, control panel: PRATICO II CEB, weight: 1.3t. An on-site inspection is possible.

Inv. Num. : 9030 Type: EM80 Producer: ADIGE Created: 2015 Parameters: Control system: SIEMENS Switch-on hours: 37558 h Hours: 26407 h Machine weight: 8500 kg The machine is designed to process steel tubes with a length of 20–600 mm and a diameter of 20–80 mm.

A complete CNC CO2 laser cutting system Bystronic is available. Working dimensions X/Y: 4000mm/2000mm, travel path X/Y/Z: 4060mm/2030mm/1700mm, max. simultaneous speed: 84m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. table load: 1500kg, weight: approx. 18500kg, operating hours: 29456h. Laser source: Bystronic ByLaser 6000, laser type: CO2, laser power: 6kW, wavelength: 10600nm, polarization: circular, pulse frequency: 1-2500Hz, max. cutting capacity steel/stainless steel/aluminum: 25mm/25mm/15mm, weight: approx. 1800kg, laser hours: 10275h. Documentation available. An on-site inspection is possible.

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

Inv. Num. : 9033 Type: PUMA ST32G Producer: DOOSAN Created: 2018 Parameters: Control System: FANUC Series 31i Model B Switch-on hours: 4,360 h Hours: 2,443 h Maximum turning diameter: 32 mm Max. turning length: 320 mm Maximum spindle speed: 8000 1/min Axis Z: 320 mm Rapid traverse X/Y/Z: 32 m/min Spindle diameter: 32 mm Length: 2640 mm Width: 1400 mm Height: 1840 mm Weight: 3500 kg Equipment: Technical documentation Chip conveyor High-pressure cooling 70 bar IEMCA BOSS 338 Bar Feeder Oil mist extraction Losma

Control: FANUC 18i-T Rotary Ø: 32 mm Turning length: 120 mm Max. speed main spindle: 8,000 min/-1 Max. speed sub-spindle: 8,000 min/-1 SLIDE 1 x-travel 1: 65 mm y-travel 1: 350 mm Tool stations 6 / 4 pos. Fixed stations 6 Powered stations 4 SLIDE 2 x-way 2: 265 mm z-path 2: 320 mm Tool stations 2 / 3 pos. Fixed stations 2 Powered stations 3 CARRIAGE Y2 Tool positions 3 / 2 / 2 pos. Exterior machining 3 Interior Machining 2 Powered stations 2 Weight: 4,500 kg IEMCA BOSS bar feeder

max. bar Ø: 42 mm Max. speed: 4,500 1/min 8-station turret of which 4 are powered Travel X= 110, Y= 50 mm 2. 8-station turret of which 4 are powered Speed driven tools: 6,000 1/min 1 longitudinal carriage 1 vertical slide Pick-up spindle Chip conveyor IEMCA BOSS 545 Bar Feeder Weight 4100 kg

CNC vertical machining center Type: VF-3 SSHE Manufacturer: Haas Year: 2008 Control: Haas 4th axis Hours: 18500 New spindle in 2021 X: 1016 mm Y: 508 mm Z: 635 mm Max spindle speed: 12000 rpm Table: 1219 x 457 mm Max table load: 794 kg Machine weight: 6200 kg Work and tool probe Through spindle cooling Chip conveyor Machine in good condition, under power Find more here - / Contact us at -

Key data: 2500 mm, 1000 mm, 1100 mm

CNC Bed Milling Machine Manufacturer: Anayak Type Performer 2500 Year of manufacture 2007 Control Heidenhain iTNC530 ( with new monitor ) Table size 2700 x 850mm Load 6,000kg Travel X/Y/Z 2500/1000/1100mm Tool holder SK50 IKZ Internal Coolant Supply Chip conveyor Electronic Handwheel Heidenhain HR410 Head cannot be swivelled over program Engine on: 54.205h Spindle on : 14.850h Without the accessories that can be seen.

Three similar but not identical CNC sliding headstock automatic lathes Tornos including LNS bar loaders are available. 1) Lathe, axes: 9, spindles: 2, max. bar diameter: 10mm (one only 7mm), speed: 16000rpm, stroke: 66mm, machine dimensions X/Y/Z: approx. 1700mm/1050mm/2000mm, weight: approx. 1500kg, control: Fanuc. 2) Bar loader, bar diameter range: 1mm-12mm, loading capacity: 7mm/10mm: 36/24. Documentation available. An on-site inspection is possible. Individual sale of one lathe with associated bar loader possible by agreement.

Manufacturer: Nexturn Model: SA-20D Year of Manufacture: 2008 Machine Hours - Control ON Time: 36,985 hours - Automatic Running Time: 23,697 hours - Feed Time: 17,438 hours - Total Parts Produced: 1,188,215 Recent Maintenance & Overhauls - Sub-spindle replaced approximately 2 years ago including spindle bearings and sealing air - system retrofit - Y-axis fully overhauled in autumn 2025 (bearings and ball screw replaced) - X2-axis overhauled approximately 3 years ago Included Accessories - Loading magazine with additional channels - Various collets for main spindle and sub-spindle - Various guide bushings - Chip conveyors Find more here - / Contact us at -