cnc horizontal table used for sale

table length: 2000 mm table width: 1000 mm table height: 850 - 900 mm weight of the machine ca.: 0,45 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Round table, round dividing table, dividing head, dividing head -Table: Ø 250 mm -Height: 100 mm -Groove: 12 mm -Dimensions: 320/400/H100 mm -Weight: 33 kg

number: 57 Positionen weight: 98 kg condition: neu : 28 mm Set 2: 57 pieces, 28mm system, consisting of: Clamps: 6 x 280610.N Clamps: 4 x 280630.N Prism: 4 x 280648.1.N Bolt: 18 x 160511 Magnetic bolt 4 x 280740 Stop: 6 x 280410.N Stop: 6 x 280420.N Angle: 4 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Accessory set. 1 x 283999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1000 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,25 U/min max. torque on the faceplate: 900 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,37 + 0,75 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary table, rotary dividing table, dividing attachment, dividing head -Handover in the current condition as seen -Condition: see photos -Table: Ø 300 mm -Height: mm -Groove: 14mm -Dimensions: 380/500/H130 mm -Weight: 51.5kg

Spindle for plate boring mill, table boring mill, boring mill, milling machine, quill, boring head, Replacement spindle -SK50 holder for: screwing onto the faceplate -Adjustment: SK50 -Dimensions: 220/220/H160 mm -Weight: 20 kg

Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm -Height: 320 mm -Bore center: Ø 57 mm -Rotary table: swiveling -Dimensions: 360/310/H320 mm -Weight: 64 kg

table length: 2400 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,55 t dimensions: 2,4 x 1,2 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 225 mm table width: 175 mm x-travel: 120 mm y-travel: 110 mm table height: 140 mm T-slots: 12 mm weight: 17,5 kg dimensions: 0,35 x 0,35 x 0,22 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm -Height: 195 mm -Bore center: Ø 57/40 mm -Dimensions: 310/220/H195 mm -Weight: 28 kg

Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm -Height: 195 mm -Bore center: Ø 57 mm -Dimensions: 355/200/H245 mm -Weight: 42 kg

table length: 3000 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 1,5 t dimensions: 3,0 x 1,5 x 0,9 m Welding table SIEGMUND Professional Extreme 850 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,99 t dimensions: 2,4 x 1,2 x 0,9 m Welding table SIEGMUND Professional Extreme 850 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 1,5 t dimensions: 3,0 x 1,5 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,99 t dimensions: 2,4 x 1,2 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary table, rotary indexing table, dividing head, dividing head -Chuck size: 125 mm -Feed: Rohm -Division: 12 -Height: 300 mm -Dimensions: 170/170/H300 mm -Weight: 19 kg

table length: 3000 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,8 t dimensions: 3,0 x 1,5 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 55 Positionen : 16 mm condition: neu weight: 23 kg Set 2 55 pieces, 16mm system, consisting of: Clamps: 6 x 160610 Clamps: 2 x 160630 Prism: 4 x 160645.1.N Bolt: 18 x 160511 Stop: 4 x 160410.N Stop: 6 x 160420.N Angle: 6 x 160108.N Angle: 6 x 160110.N Angle: 2 x 160162.N Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 1000 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,3 t dimensions: 1,0 x 1,0 x 0,85 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Accessory trolley for welding table, 3D welding and assembly tables -with: shelves for the accessories -Number: 1x tables available -Price: per piece -Dimensions: 1060/650/H1260 mm -Weight: 52 kg

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: -Speeds: 3000, 4500, 6000, 9000 rpm -Dimensions: 1400/800/H1480 mm -Weight: 600 kg

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 500 mm -Height: 120 mm -Groove: mm -Dimensions: 660/680/H120 mm -Weight: 129 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 400 mm -Groove: mm -Height: 150 mm -Dimensions: 600/700/H150 mm -Weight: 147 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 310 mm -Height: 130 mm -Groove: mm -Dimensions: 410/380/H130 mm -Weight: 40 kg

Stainless steel, work table -stable execution -Dimensions: 898/598/H870 mm -Weight: 12 kg

Aluminum table, aluminum work table -Material: Aluminum -1x baseboard -2x plastic worktops -Dimensions: 1210/2010/H800 mm -Weight: 70 kg

Aluminum table, aluminum work table -made of aluminium -1x ground floor -Border -Feet: adjustable -Dimensions: 2020/900/H960 mm -Weight: 30 kg

Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg

cutting range: 90°: 90 mm cutting range: 45°: 75 mm Saw blade diameter: 315 mm Table dimensions: 800 x 500/400 mm Saw blade: 30 mm machine weight ab.: 45 kg dimensions: 850 x 600 x 430 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary table, rotary indexing table, dividing head, dividing head -Round table: swiveling, with four-jaw chuck -Four-jaw chuck: Ø 190 mm -Bore center: Ø 54 mm -Base plate: Ø 205 mm -Dimensions: 420/410 / H395 mm -Weight: 70 kg

table length: 1105 mm table width: 220 mm Plate thickness: 30 mm weight: ca. 300 kg dimensions: 1105 x 220 x 150 mm T-slot - width: 16 mm number of T-slots: 1, Mitte total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 600 mm table width: 420 mm table height: 300 mm side-clamping surface:: 300 mm groove width: 18 mm no. of flutes: 3 x 2 weight: 115 kg dimensions of the machine ca.: 600 x 420 x 300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Manufacturer: Schmid, rotary table with three-jaw chuck -Type: TWS200 -Mouth size: Ø 200 mm -Dimensions: 250/250/H365 mm -Weight: 52 kg

table length: 4000 mm table width: 3000 mm table load: 60 t total power requirement: 14.3 kW weight of the machine ca.: 48.5 t dimensions of the machine ca.: m Brand: FX Type: 83.300/400 Used machine Digital readout: Heidenhain ND 780 Table length: 4.000 mm Table width: 3.000 mm Table load: 60 T Movement: 2.000 mm Width T-slots: 58 mm (M30) mm Feeding: 4 - 1.500 mm/min Rapid traverse: 4.000 mm/min Power: 14,3 kW Machine weight: 48.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Round table. with three-jaw chuck -Chuck size: Ø 210 mm -Spindle bore: Ø 64 mm -Center height: 150 mm -Dimension: 310/250/H260 mm -Weight: 47 kg

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary dividing table -Rotary table: Clamping surface: Ø 235 mm -Middle hole: Ø 25 mm -Groove width: 14 mm -Number: 2x round table available -Price per piece -Dimensions: 330/310/H110 mm -Weight: 28.8 kg

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Rotary table: with three-jaw chuck -Mouth size: Ø 160 mm -Spindle bore: Ø 42 mm -Dimensions: 510/320/H220 mm -Weight: 50.9 kg

spindle diameter: 100 mm x-travel: 1200 mm y-travel: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 5,6x3,4x3,x7 m Brand: Femco Type: WBT-100SR2 CNC brand: Mitsubishi CNC model: Meldas C3 Year of make: 1995-05 Facing support Table length: 1.440 mm Table width: 1.600 mm Spindle diameter: 100 mm ø Machine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mm incl. right-angle milling head type Huron The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary table, rotary dividing table, dividing attachment, dividing head -Manufacturer: Walter, rotary table type Rts 400 G -Clamping surface: Ø 400 mm -Center bore: Ø 31 mm -Groove width: 14 mm -Dimensions: 700/510/H260 mm -Weight: 294 kg

Clamping table, T-slot table, milling machine table, drilling machine table, boring machine table -Clamping table: drilling machine table -Table surface: 480 x 330 mm -Bore: Ø 48 mm bolt circle Ø 108 x 13 mm -Groove width: 13 mm -Dimensions: see photo -Dimensions total: 540/550/H70 mm -Weight: 30 kg

Clamping table, clamping angle, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Round table with three-jaw chuck -Chuck size: Ø 315 mm -Spindle bore: Ø 103/28 mm -Dimensions: 460/270/H410 mm -Weight: 123 kg

turning clamp, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, rotary indexing table, indexing table -Tactical table: pneumatic -Clamping surface: Ø 270 mm -Division: 24 -Dimensions: 500/130/H280 mm -Weight: 35.7 kg

clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 365 x 305 mm -Dimensions: see photo technical drawing -Dimensions: 365/305/H150 mm -Weight: 57 kg

clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 500 x 280 mm -Dimensions: see photo technical drawing -Dimensions: 500/280/H180 mm -Weight: 53 kg

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 45 mm -Dimensions: 220/180/H260 mm -Weight: 13.3 kg

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 42 mm -Dimensions: 150/130/H245 mm -Weight: 5.3 kg

spindle moulder, spindle moulder -Manufacturer: Metabo, swivel table milling machine type Tf 1690 D with support table -Drive: 2.0 kW -Milling spindle: Ø 30 mm -Speeds: 3,000 / 6,250 / 9,000 rpm -Cutter: Ø max. 200 mm -Table length: 3600 x 500 mm -Dimensions: 3600/910/H1610 mm -Total weight: 170 kg

Printing plate deal Grafoteam TAT 48; good condition; we overhaul before delivery; Max. Plate format 1630x1300mm, min.510x400mm; Interface connection possible. Turn around table Grafoteam TAT 48; good condition; will be rebuilt before shipping; max.plate size 1630x1300mm, min.510x400mm; possible to connect with other machine.

spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg