cnc horizontal table used for sale

General SKU204U049 MakeAzo TypeTFS 140x3350LG Mach.No.446631 Year of construction2003 Main Features Motor1.5 KW Length3330 mm Inlet diameter115 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Trough-typecheck Diameter150 mm Length4000 mm Between inlet and outlet2600 mm Shaft diameter50 mm Pitch110 mm Inlet115 mm Outlet150 mm Motor1,5 kW Screw speed120 rpm Outlet height823 - 1760 mm With coverscheck Information LocationBarneveld Mounted inclined in framecheck Mounted on wheelscheck Floorspace4,3 x 0,8 m Total height2.6 m Weight420 kg CEcheckSpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySoli ...

General SKU204U033 MakeAZO TypeDFS 140x600 Mach.No.446634 Year of construction2007 Main Features Motor1.1 KW Length800 mm Inlet diameter300 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4404 Horizontal conveyor screwcheck Tube-typecheck Diameter135 mm Length800 mm Shaft diameter35 mm Pitch120 mm InletDia. 300 mm OutletDia. 130 mm Motor1,1 kW Screw speed90 rpm (50 Hz): 109 rpm (60 Hz) Information Mounted on framecheck LocationBarneveld Floorspace1,4 x 1,4 m Total height0,96 m Weight300 kg CEcheck Extra SpecificationsContainer bottom dimension 1,180 x 1,180 mm. This conveyor screw is equipped with a vibrating motor. Easy-clean version. SpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubrica ...

General SKU212U184 LocationBarneveld Main Features Motor5.6 KW Length2870 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Tube-typecheck Diameter390 mm Length2870 mm Between inlet and outlet2400 mm Shaft diameter160 mm Pitch155 mm Inlet350 mm Outlet350 mm Motor5,6 kW 380 Volt (Ex) Screw speed120 rpm Information Makeunknown: missing type plate Floorspace4,4x0,7 m Total height0,7 m Weight820 kg ATEX compatiblecheckSpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicAgrochemicalsBiotechn ...

General SKU235U235 LocationBarneveld CEcheck MakeIlchmann Main Features Motor3 KW Length6525 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4571 (316Ti) Horizontal conveyor screwcheck Trough-typecheck Double shaftcheck Diameter200 mm (2x) Length6525 mm Between inlet and outlet5880 mm Shaft diameter108 mm (x) Pitch200 mm Inlet630x350 mm Outlet350x350 mm Max. temperature90 °C With adjustable packing glandscheck Motor3 kW, 220-230 volt / 380-400 volt, 1456 rpm Screw speed31 rpm With coverscheck Information TypeDTSF 2x200x6.525 Mach.No.CRO 0348 Year of construction2014 Floorspace8,3x5,1 m Total height0,49 m Weight1250 kg Extra SpecificationsCapacity: max. 5 m³/hSpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmetic ...

General SKU244U284 MakeUnknown ( missing type plate) TypeUnknown Year of constructionunknown LocationBarneveld Main Features Length2590 mm Inlet diameter160 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Trough-typecheck Diameter150 mm Length2590 mm Between inlet and outlet2190 mm Shaft diameter162 mm Pitch55mm and 235mm Inlet250x160 mm Outlet160x160 mm With jacketcheck Insulatedcheck Without motorcheck With coverscheck Information Floorspace2,85x0,41 m Total height0,40 m Weight200 kg Extra Specificationslid is fitted with spray tube/drip tube. SpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySo ...

General SKU244U280 LocationBarneveld Main Features Motor1.5 KW Length2340 mm Inlet diameter100 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4552 Horizontal conveyor screwcheck Trough-typecheck Diameter90 mm Length2340 mm Between inlet and outlet2000 mm Shaft diameter60 mm Pitch97 mm Inletdia. 100 mm Outletdia. 125 mm Insulatedcheck Motor1,5 kW 220-240/380-415 Volt Screw speed20-100 rpm Height between in- and outlet500 mm With coverscheck Information Makeunknown: missing type plate Floorspace3,5x0,4 m Total height0,45 m Weight300 kg Extra Specificationsthis conveyor screw served as an inlet for cryogenic grinding SpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal  ...

General SKU292T671 MakeVan Tongeren kennemer BV Mach.No.Z43721 / T4400 Year of construction2017 Main Features Motor1.1 KW Length5000 mm Inlet diameter175 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Tube-typecheck Diameter380 mm Length5000 mm Between inlet and outlet4650 mm Shaft diameter160 mm Pitch245 mm Inletdia. 175 mm Outletdia. 180 mm Motor1,1 kW 219-241/380-420 Volt (Ex) With variable speed drivecheck (Ex) Screw speed27 rpm. (34 895 l/h) Information LocationBarneveld Floorspace6,5x0,7 m Total height0,7 m Weight700 kg CEcheck ATEX compatiblecheckSpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid ...

General SKU292T672 MakeVan Tongeren kennemer Mach.No.Z43752 Year of construction2015 Main Features Motor1.1 KW Length1900 mm Inlet diameter175 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Tube-typecheck Diameter360 mm Length1900 mm Shaft diameter170 mm Pitch255 mm Inletdia. 175 mm (2x) Outletdia. 140 mm Motor1,1 kW 219-241/380-420 Volt With coverscheck Information LocationBarneveld Floorspace3,2x0,55 m Total height0,6 m CEcheckSpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicAgrochemicalsBiotechnologyRubberOther ...

General SKU251M188 LocationBarneveld Main Features Motor3 KW Length1100 mm Inlet diameter260 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwEasy clean (1x) Diameter260mm Length1100mm Between inlet and outlet± 800mm Shaft diameter60mm Pitch100-175mm Inletdia. 300mm, Inlet flange dia. 400mm Motor3,0 KW, 400 Volt Screw speed± 78 Rpm MaterialStainless steel Information Makeunknown (manufacturer tag is missing) Floorspace2,2x0,6 M Total height1,0 M Weight400 KGSpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicAgrochemicalsBiotechnologyRubberOther che ...

General SKU239T284 MakeGuttridge TypeScrew Conveyor Mach.No.580194-3-1 sc6.2 Year of construction2013 Main Features Motor5.5 KW Length4700 mm Inlet diameter400 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Trough-typecheck Diameter460 mm Length4700 mm Between inlet and outlet3900 mm Shaft diameter150 mm Pitch325 mm Inletdia. 400 mm Outletdia. 300 mm Motor5,5 kW 400/690 Volt Screw speed89 rpm Outlet height1400 mm Height between in- and outlet1400 mm With coverscheck Information LocationBarneveld Mounted on wheelscheck Floorspace5,8x0,9 m Total height1,4 m Weight1600 kg CEcheck Extra Specificationswith a rail system Technical specs Extra informationScrew blade thickness 6 mmSpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Oth ...

General SKU239T285 MakeGuttridge Mach.No.0580194-1-1 Year of construction2013 Main Features Motor18.5 KW Length6500 mm Inlet diameter390 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Trough-typecheck Diameter720 mm Length6500 mm Between inlet and outlet5850 mm Shaft diameterdia. 200 mm Pitch500 mm Inletdia. 390 mm Outlet530x420 mm Motor18,5 kW Screw speed33 rpm Height between in- and outlet1500 mm With coverscheck Information LocationBarneveld Floorspace7,5x1,8 m Total height1,5 m Weight2800 kg CEcheck Technical specs Extra informationScrew blade thickness 6 mmSpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfecti ...

General SKU321S564 LocationBarneveld CEcheck MakeSitecon Process Engineering Main Features Motor3 KW Length1150 mm Inlet diameter200 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Trough-typecheck Diameter180mm Length1600mm Between inlet and outlet1150mm Shaft diameter90mm Pitch200mm Inletdia. 200mm Outletdia. 200mm Motor3 kW 230/400 Volt Screw speed106 rpm With covers(1x) Information TypeTrogförderschnecke Mach.No.910-080-00 Year of construction2009 Floorspace2,3x0,7 M Total height0,8 M Weight350 KgSpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceutica ...

General SKU410S987 LocationBarneveld MakeNema Main Features Motor5.5 KW Length5125 mm Inlet diameter265 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4552 Horizontal conveyor screwcheck Tube-typecheck Diameter250 mm Length5700 mm Between inlet and outlet5125 mm Shaft diameter140 mm Pitch240 mm InletDia. 265 mm OutletDia. 245 mm With adjustable packing glandscheck Motorcheck Screw speed76rpm With coverscheck Information TypeRS 0250 x 05700 - Kusae Mach.No.50.993-001 Year of construction1997 Floorspace6,7 x 0,9 m Total height0,8 m Weight1060 kg Extra SpecificationsThis conveyor screw is equipped with a new motor and reducer. SpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleo ...

General SKU239T286 MakeGuttridge Mach.No.0580194-7-1 Year of construction2013 Main Features Motor18.5 KW Length5000 mm Inlet diameter390 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Trough-typecheck Diameter700 mm Length5000 mm Shaft diameterdia. 200 mm Pitch500 mm Inletdia. 390 mm Outlet650x400 mm Motor18,5 kW Screw speed33 rpm Height between in- and outlet1500 mm With coverscheck Information LocationBarneveld Floorspace7,3x1,7 m Total height1,40 m Weight3000 kg CEcheck Extra SpecificationsSynatel level control, type digimatic, Schmersal sensors Technical specs Extra informationScrew blade thickness 6 mmSpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubri ...

General SKU235K162 LocationBarneveld MakeAZO GmbH + Co. Osterburken TypeTrogschnecke TFS-315 G B A21 Main Features Motor2.2 KW Length2000 mm Inlet diameter315 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screw(1x) Trough-typecheck Diameter315mm Length2000mm Between inlet and outlet± 1450mm Shaft diameter90mm Pitch145/290mm Inletdia. 250mm Outlet2x dia. 300mm Motor2,2 KW, 230/400 Volt Screw speed± 76 Rpm With coverscheck Information Mach.No.408691 Year of construction2004 Floorspace2,9x0,5 M Total height0,6 M Weight260 KGSpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiop ...

Horizontal Milling Machine DIXI, Type 350 Mach. No. 350-16 Control: Dixi CNC 4400 Table dimensions: 810 x 810 mm table load: 2000 kg X/Y/Z: 1000 / 1000/1000 mm B-axis rotating table C-axis vertical round rotating table RPM: 10-3000 U / min Power: 18 kWh Table with 7 T-slots: 18 mm rapid traverse: 20-10000 mm / min taper ISO 50 Weight: 17 tons Accessories: Vertical milling head, vertical round table, angle rack, holders, etc.

Tischaufspannflaeche Max Tischbelastung 25 to . groove distance 180 mms table movement 1,000 mms table rotation B axis 360? Aufspannflaeche 1600 x 2,500 mms number of the grooves 9 table overtakes completely in 2012 anew SIEMENS impulses, new MOOR GROVE graduations

2 column portal gantry milling machine between columns: 2550 mm cooling through spindle total power: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2550 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Control: Siemens Power needed (KVA): 90 Weight: 55 ton ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

spindle diameter: 225 mm x-travel: 8000 mm y-travel: 5600 mm z-travel: 2100 mm w-axis: 1400 mm spindle turning speed - stepless: 0-650 U/min spindle taper ISO: 60 feed stepless: 5 - 3000 mm/min rapid traverse: 5 m/min weight of the machine ca.: 150 t dimensions of the machine ca.: 12 x 5 x 8 m total power requirement: 120 kW Ram type horizontal boring machine was reconditioned and modernized in 2006, original yom was 1972. Control Siemens 840 C. Machine will come with tools and a vertical milling head. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X=3500mm Y=2000mm Z=1250mm W=800mm H=360° spindle 130 mm, ISO 50, max. 1600 rpm table 1600 x 1800 mm with a load of 12000 kg with Siemens electric and CNC Heidenhain TNC 415B Oil cooled: Schimpke. Dismantled. The machine has been used very little = in very good technical condition.

This SCHÜBEL MT 630 CNC was manufactured in 1999. It is a horizontal turning machine featuring a point width of 2,000 mm, a circulation diameter of 630 mm over the bed, and 290 mm over the cross slide. The speed range is 8 - 3,000 rpm with a drive power of 28 kW. Contact us for more information about this machine.

max. wheel diameter: 150 mm gear width: 300 mm max. module: 4,5 min. module: total power requirement: 20 kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 870 mm band speed: 18 - 110 m/min Control: CNC total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,63 t dimensions of the machine ca.: 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-a ...

capacity 90 degrees: round: 310 mm capacity 90 degrees: square: 280 mm : 400x250 saw band length: 4020x34x1,1 mm band speed: 18 - 100 m/min table height: 890 mm total power requirement: 2,2 kW weight of the machine ca.: 0,99 t dimensions of the machine ca.: 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters suc ...

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 880 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,84 t dimensions of the machine ca.: 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to ente ...

Daewoo X: 1250 - Y: 1000 - Z: 1000 mm CNC X-axes: 1250 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: 800 x 800 mm Max weight on the table: 2000 kg Admission in spindle (ISO): ISO 50 Power on the spindle: 25 kW Control: Fanuc OM Number of axes: 4 axes: X,Y,Z,B Toolstore: yes Tools: 90 positions Frequency : 20 -> 4500 rpm Number of pallets : 2x Power principal motor: 70 kva Length: 4100 mm Depth: 6850 mm Height: 3240 mm Weight: 18 ton ACCESSORIES: yes Cooling-system: yes

spindle diameter: 225 mm x-travel: 8000 mm y-travel: 5600 mm z-travel: 2100 mm w-axis: 1400 mm spindle turning speed - stepless: 0-650 U/min spindle taper ISO: 60 feed stepless: 5 - 3000 mm/min rapid traverse: 5 m/min weight of the machine ca.: 150 t dimensions of the machine ca.: 12 x 5 x 8 m total power requirement: 120 kW Ram type horizontal boring machine was reconditioned and modernized in 2006, original yom was 1972. Control Siemens 840 C. Machine will come with tools and a vertical milling head. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production li ...

spindle diameter: 205 mm x-travel: 10000 mm y-travel: 2500 mm w-axis: 500 mm spindle travel: 1250 mm Control: Heidenhain type: TNC 355 spindle taper ISO: 50 transmission ratio: 2 feed - independent: 0-3000 mm spindle motor: 37 kW total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: 14,1x3,2x5,6 m optionally with plate field The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to you ...

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING   grinding length: 1600 mm   grinding width: 900 mm   workpiece height (max) with largest wheel: 600 mm   number of processing axes (excl parallel axes): 3 TABLE (SURFACE GRINDING)   table surface (left-right): 1600 mm   table surface (front-back): 800 mm SPINDLESTOCK GRINDING SPINDLE   X-axis travel: 1700 mm   spindle revolutions (max): 1000 /min GRINDING TOOL   type of grinding tool: wheel   diameter (max): 500 mm   borehole: diameter: 203.2 mm   width: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 30 kW   mains voltage: 400 V   mains frequency: 50 Hz

This SPINNER PD-CNC was manufactured in 2006. A reliable horizontal turning machine, it offers solid performance for your machining needs. Consider the opportunity to buy this SPINNER PD-CNC horizontal turning machine. Contact us for more information.

This Takisawa LA-300 CNC was manufactured in 2018. A robust horizontal turning machine featuring a spindle speed of 3,500 rpm, maximum turning diameter of 450 mm, and a 12-position tool turret. It includes a FANUC Series 0i-TC control for precise operations. If you are looking to get high-quality turning capabilities, consider the Takisawa LA-300 machine we have for sale. Contact us for further details regarding this machine.

This 4-axis Schaublin 140R CNC horizontal turning machine was manufactured in 2008. It features a CNC Fanuc 18i-TB control, a maximum turning diameter of 300 mm, and a spindle speed range of 50 – 5,000 rpm. Equipped with a Y-axis and sub-spindle, it offers a turret with 12 driven tool stations. If you are looking to get high-quality turning capabilities, consider the Schaublin 140R CNC machine we have for sale. Contact us for more information.

spindle diameter: 130 mm x-travel: 5000 mm y-travel: 3000 mm control: Heidenhain TNC 426 taper ISO: 50 P.D.B. w-axis: 900 mm z-travel: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis Gleason PFAUTER G320 CNC + Promot Automation was manufactured in 2001. It features a Siemens 840 control unit, a maximum workpiece diameter of 380 mm, and a module range of 0.5-7.0. The system includes Promot Automation handling, a robotics system, and a cooling belt system. If you are looking to get high-quality gear grinding capabilities consider the Gleason PFAUTER G320 CNC machine we have for sale. Contact us for more information about this machine.

Inv. Num. : 8239 Type: WHN 13 CNC Producer: TOS Created: GO 2004 Parameters: Control system: MEFI X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel distances Z-axis: 1200 mm

spindle diameter: 105 mm x-travel: 1250 mm y-travel: 1000 mm z-travel: 600 mm table length: 1100 mm table width: 900 mm tool adaptor: 50 ISO / MK total power requirement: kW weight of the machine ca.: t CNC Table Borer, Reconditioned 2002, BOSCH CC 300 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 1000 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 850 mm main drive motor: 45 kW table surface area: 1250x1600 mm Control: Heidenhain type: TNC 426 workpiece weight: 12500 kg : 720 radial face slide travel: 240 mm total power requirement: 90 kW weight of the machine ca.: 26,3 t dimensions of the machine ca.: 6,5x5x5x4 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further of ...

NIKKEN 5 AX - 170 CNC - Rotary Table incl. Controls - Type : 5-axis CNC / rotary table -The NIKKEN / 5 AX - 170 is a compact and robust CNC swivel table for precise milling and drilling work in 4+5 axes -Complete documentation available -Rotary table / dimensions LxWxH 780x340x280mm

spindle diameter:221,44 mm x-travel:2.000 mm y-travel:2000 mm z-travel:1.250 mm b-axis:360 ° table-size:1600 x 1800 mm max. workpiece weight:12.000 kg Work spindle:130 mm tool adaptor:SK 50 Tool changer:60 - Fach Ø Flange Hollow Spindle:221,44 mm Max. Ø centering cone:180 mm spindle stroke:800 mm turning speeds:400 ? 1600 U/min feed::bis 8000 U/min Table rotation axis B:1,5 U/min weight of the machine ca.:32 t Control pedestal, electrically height-adjustable approx. 1200 mm, Sawdust Conveyor,

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

more tech. Details on request

Important and outstanding design features of the RaptorX-SL with steel substructure / gantry design RaptorX-SL1200/S20 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special size (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! To such a way that you are able to process plate materials with the greatest stability of the Z-axis exactly as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or water jet cutting system, are available In the middle range of the machine (between the foottubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm height ( at 400mm long F ...

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Important and outstanding design features of the RaptorX-SL with steel substructure /RaptorX-SL3200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the high-adjustable working area (read-through he under bridge variable : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special coarseness up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm hei ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

Specifications / Technical Data S-720 CNC-Fraesmaschine With the High-Z CNC-Fraes.- and Engraving Machine you acquire an all-round talent in TUeV-certified Quality (EMV). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equipment of all high- ...