129,230 used machines on RESALE, but how to find them? Machine Search
Cream blowers Hobart Model: G 5 R Table model for 3-5 liters of raw cream with nozzle set and agitator Time controller 1 to 6 min Stainless steel kettle up to 5 liters Connection 220V Dimensions: 410 x 410 x 530 mm, WxDxH Used device cleaned and tested Option: Maintenance contract Warranty Visit our large bakery equipment exhibition!
Condition: in working order, well-maintained Availability: immediately Connection voltage: 400 V Frequency: 50 Hz Power: 16.3 kW Current: 31.8 A
We are selling here a dishwasher from the manufacturer Hobart, type UPS-10 in a very good used and functional condition. The machine runs on 400 volts, 18 kW, built in 2011, for E2 crates, 3 pieces at once, completely stainless steel, detergent and rinse riner feeder, washing nozzles from four sides, workshop checked, immediately ready for use, dimensions W/D/H 84/94/197 cm, others on request.
Height=1.8 m, Overall length= 1.15 m, Overall width= 1.38 m, Net weight= 355 kg,
Height=0.825 m, Overall length= 0.64 m, Overall width= 0.6 m, Net weight= 57 kg,
Height=2 m, Overall length= 0.95 m, Overall width= 1.4 m, Net weight= 270 kg,
Height=1.51 m, Overall length= 0.742 m, Overall width= 1.268 m, Net weight= 212 kg,
Height=1.98 m, Overall length= 0.95 m, Overall width= 0.78 m, Net weight= 220 kg,
Hobart Cream Blowers G 5 R-FC Hobart Model: G 5 R-FC Table model Easy to use Time controller 1 to 6 min Stainless Steel Boiler Connection 220V Used device cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience!
A universal commercial dishwasher Hobart is available. Basket inner dimensions X/Y: 570mm/675mm, machine dimensions X/Y/Z: approx. 800mm/950mm/2050mm, weight: approx. 200kg. On-site inspection is possible.
Item condition: in working order Availability: immediately Table and sink: included Original price 2023: €28,000.00
Late model Hobart commercial meat saw. Model 6801, serial number 31-1464-941, 200/230volts and 3 phases. Tested. Comes with one 142" blade. Unit has normal wear of used equipment, will require some extra cleaning.
Hobart H600 Planetary Stirring Machine Type: H600 15 Minute Timer 4 speeds adjustable Boiler Height Adjustable With 1 kettle 1 whisk
General SKU417X1289 MakeHobart LocationBarneveld TypeA200-B3HE Main Features MaterialStainless steel Volume20 Ltr. Motor0.37 KW Specified Features - Planetary mixer Planetary mixercheck Motor0,37 kW With variable speed drivecheck Speed mixing/kneading arms107 rpm - 198 rpm - 361 rpm With pancheck (2x) Pan sizes1: ø 320 x 300 mm: 2: ø250 x 300 mm MaterialStainless steel 1.4306 (304L) Information No.97-0177-604 Year of construction2006 Floor space0,6 x 0,5 m Total height0,8 m Weight100 kgPlanetary mixersHobartMixers > Planetary mixersBrand > Hobart What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
FUX band universal washing system FUX 1-SAF-1 with steam heating – powerful conveyor dishwasher for baking sheets, Technical specifications, - Heating type: Steam 8.5 bar, - Operating voltage: 400 V / 50 Hz / 3 phases, - Direction of rotation: right / left, - Throughput width: 612 mm, - Throughput height: 440 mm, - Waschgut: Sheets up to 650 x 600 mm, - Performance: about 75 sheets/hour, ---------------------------------------------------------------, Equipment / Zone layout, Feed zone, - Inlet No. 1 with hood, 350 mm, Pre-wash zone, - Pre-wash tank S”, FTX tank, 900 mm, - 4 kW pump, - Side washing arm, Main washing zone, - Main wash tank A”, 1,400 mm, - Tell-Druckwaschsystem, - 2 x 2.3 kW pumps, - Tank heater HDD via injector, Clear rinse zone, - Fresh water clarification rinse zone F, 600 mm, outlet, - Outlet No. 1, 1,100 mm, Instantaneous heater, - With condensate guidance in A- ...
A Hobart pass-through crate washing machine is available. Heating type: steam, steam pressure: 8.5bar, pass-through width: 612mm, pass-through height: 440mm, washing goods: sheets, sheet dimensions X/Y: 650mm/600mm, throughput capacity: approx. 75sheets/h, infeed length: 350mm, outfeed length: 1100mm. Documentation available. An on-site inspection is possible.
Planetary mixer Hobart H 600 60 litre stainless steel kettle with 1 whisk and 1 flat beater Connection 400V, 16-CEE plug Used machine from the bakery
Dishwasher Hobart UXT-10N Genius-X Fine Filter System Easy Clean Concept 3 programs with color display Drain pump Rotor X Washing System only DGUV V3 tested by us Connection: 400V, 32A-CEE plug Used machine
Universal Dishwasher / Hood Type WasherProduct DescriptionManufacturer: HobartModel: UXTLH-10NByear of construction: 2015400V 50Hz 3N 21.6kW 35.1AMaterial: Stainless Steel Digital Control3 ProgramsCondition: Baker's ConditionDetails see pictures
hobart UXSBÄKO 10A Universal Dishwasher GastroProduct description:usedBakery conditionManufacturer: HobartModel: UXSBÄKO 10A Dishwasher, crate washer, dishes, …the all-round machine with great performance for boxes, trays, dishes, jugs, etc. Power supply: 400V, 50Hz, 15.6kW, 24.4A 3N PHDetails see pictures
Dishwasher Hobart UXS-10NBHobart Universal DishwasherModel: UXSBÄKO-10NBÂ Year: 2014Basket size: 720 x 680 mmShelf height 850 mmDimensions : 780 x 950 x 1980 mm, WxDxHAnschluss: 400V, 15,6kW, 24,8 A, Â 32A-CEE plugDetails see pictures
Universal dishwasher / hood type dishwasher Hobart UX 60 EB â Product description âœ" Manufacturer: Hobart âœ" Model: UX 60 EB âœ" Condition: used, functional, bakery condition âœ" Material: stainless steel âœ" digital control âœ" 3 programs âœ" Connection: 400 V / 50 Hz / 23.3 kW / 39.5 A âœ" Exterior Dimensions: W.: 138 cm, D.: 84 cm, H.: 196 cm Not tested untested Details see pictures.
- used - manufacturer Hobart - type PF 801 - has 3 speeds - 1x 80 litre stainless steel kettle - 2x attachments, 1x whisk and 1x flat beater  see pictures for details.
Hobart UX 30 ESB Universal Dishwasher Gastro Product description: - used - bakery condition - manufacturer: Hobart - model: UX 30 ESB - universal dishwasher, crate washer, dishes, … - the all-round machine with great performance for boxes, trays, dishes, jugs, etc. - Power supply: - 400 V, 50 Hz, 13.2 kW, 3N PH - Exterior dimensions W.: 77 cm, D.: 84 cm, H.: 195 cm Not tested untested See pictures for details.
Cream blower Hobart G3R â Product description âœ" Condition: used, Baker's condition âœ" Material: stainless steel âœ" Very stable Details see pictures
Cream machine Hobart G5R ✠Product description âœ" Manufacturer: Hobart âœ" Type: G5R âœ" 5 liter intake capacity âœ" Material: Stainless steel âœ" With timer âœ" Dimensions: 33 x 33 x 53 cm (WxDxH), Diameter: 41 cm Details see pictures
Dough machine / planetary agitator / planetary mixer- used- Manufacturer Hobart- Type H 800- has four speeds- 2x 80 liter stainless steel kettle- 2x attachments, 1x whisk and 1x flat beaterDetails see pictures.
Planetary mixer Hobart H600Manufacturer: HobartType: H600My 1 broom and 1x kettleTime switches are missingDetails see picture
Dishwasher Hobart UX 30 ESB Universal dishwasher 3 washing programs Easy Clean Concept Connection 400 V, 32A-CEE plug, Used machine
Height=1.86 m, Overall length= 1.9 m, Overall width= 2.3 m, Net weight= 270 kg,
This universal dishwasher from Hobart GmbH is a reliable and powerful hood-type dishwasher designed for the efficient cleaning of dishes, containers, and equipment in professional environments. The machine operates at 400 V / 50 Hz, features a robust industrial design, and is equipped with IP X4 protection and a control box mounted directly on the system, ensuring safe and convenient operation. A compact and reliable solution for food processing businesses. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: Hood type utensil washer, Voltage: 400 V, Frequency: 50 Hz, Features: IP x4, control box directly to the system
Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...
3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...
Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x ...
max. wheel diameter: 3000 mm gear width: 1200 mm max. module: 30/40 min. module: 2 table diameter: 2500 mm table load capacity: 400 kN hob dia. - max.: 450 x 500 mm milling spindle speeds: 10 - 165 U/min hob length max.: 500 mm tip circle diameter: 2050 mm tooth helical angle min/max: 0 - 45 ° center distance betw. workpiece-tool min/max.: 150 - 1750 mm milling slide swivelling: 50 Grad distance table / counter stay: 1050 - 2050 mm shifting: 300 mm workpiece weight: 40 t table bore diameter: 800 mm depth of hole: 1100 mm main drive motor: 37 kW min. workpiece diameter: 290 mm min. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1800 mm/min radial feed: 1 - 500 mm/min feed: Tangential 1 - 450 mm/min rapid traverse: 1875 / 530 / 470 mm/min electrics - voltage/frequency: 380 / 50 V/Hz control: Siemens Sinumerik 3M total power requirement: ...
max. wheel diameter: 4400 mm gear width: 645 mm max. module: 35 Control: Siemens main drive motor: 37 kW table diameter: 2500 mm max.helical angle: +/- 30 ° workpiece weight: 40000 kg total power requirement: 142 kVA weight of the machine ca.: 75 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 150 mm gear width: 300 mm max. module: 4,5 min. module: total power requirement: 20 kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...
Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...
Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd
more tech. Details on request
Important and outstanding design features of the RaptorX-SL with steel substructure / gantry design RaptorX-SL1200/S20 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special size (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! To such a way that you are able to process plate materials with the greatest stability of the Z-axis exactly as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or water jet cutting system, are available In the middle range of the machine (between the foottubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm height ( at 400mm long F ...
Tischaufspannflaeche Max Tischbelastung 25 to . groove distance 180 mms table movement 1,000 mms table rotation B axis 360? Aufspannflaeche 1600 x 2,500 mms number of the grooves 9 table overtakes completely in 2012 anew SIEMENS impulses, new MOOR GROVE graduations
Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...
Important and outstanding design features of the RaptorX-SL with steel substructure /RaptorX-SL3200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the high-adjustable working area (read-through he under bridge variable : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special coarseness up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm hei ...
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...
Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...
Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...
Table size: 500 x 1200 mm traverse path x: 1000 mm stroke y: 550 mm traverse path z: 600 mm spindle retainer: ISO 40 spindle speeds: 60-2700 rpm spindle drive: 10 kW Electr. Supply: 380 V, 20 kVA kW space: 3200 x 2800 x 2650 mm weight: 7.3 t
maximum number of results exceeded
please refine your search
