cnc grinder used for sale

Feeding worm with 2 speeds and working worm with 2 speeds., Capable of frozen product pieces up to -12°C., With safety guard over head and bayonet locking., Hole plate diameter: 130 mm, Capacity: max 3000 kg/h, Hopper: 130 litres, Infeed height: 1410 mm, Outfeed height: 720 mm, Power: 3 x 380V, 50Hz, 18kW, Dimensions: 1400 x 1200 x 1600 mm, Weight: 450 kg

With PZ-2/250 lifter for 200L tote bins, pneumatic lid and safety cover over head., Mixer: double paddle mixer, intermeshing, Capacity: 450 litres, Mixing speed: 5 - 40 RPM, variable speed, Hole plate diameter: 160 mm, Infeed height: 1620 mm, Outfeed height: 740 mm, Compressed air: 6 - 8 Bar, Power: 3 x 400, 50Hz, 36.3kW, Dimensions: 2350 x 1650 x 2700 mm, Weight: 1815 kg

Function: separates the pouch film from the liquid, so that the formula from non-conforming production batches can be recycled and the packaging properly separated from the bleach, as described by the seller Scope of delivery: feed table and infeed hopper, grinder with electric drive, discharge chute, inclined discharge conveyor, support frame over the collection pit, and the floor-standing control cabinet with start, stop and emergency stop Construction: painted steel and stainless steel Remarks: two units of this equipment were in service; this lot is one complete unit. No manufacturer plate, type designation, motor rating, throughput, dimensions or weight is visible on the photographs supplied or stated by the seller. Surrounding equipment shown in the background of some photographs is not included. Auction-ID: A1-48805-242

Function: separates the pouch film from the liquid, so that the formula from non-conforming production batches can be recycled and the packaging properly separated from the bleach, as described by the seller Scope of delivery: feed table and infeed hopper, grinder with electric drive, discharge chute, inclined discharge conveyor, support frame over the collection pit, and the floor-standing control cabinet with start, stop and emergency stop Construction: painted steel and stainless steel Remarks: two units of this equipment were in service; this lot is one complete unit. No manufacturer plate, type designation, motor rating, throughput, dimensions or weight is visible on the photographs supplied or stated by the seller. Surrounding equipment shown in the background of some photographs is not included. Auction-ID: A1-48805-241

Consisting of: 1x large angle grinder Milwaukee 1x small angle grinder Hitachi Auction-ID: A1-44050-213

X-axis travel [mm] 450 Y-axis displacement [mm] 250 Z-axis travel [mm] 280 Magnet width [mm] 450 Magnet depth [mm] 250 Auction-ID: A1-40982-68

Control Conventional Center distance [mm] 700 Center height [mm] 145 Auction-ID: A1-40982-94

A total of 5 tools including drills, angle sleeper, impact wrench Auction-ID: A1-50251-163

Niederberger two stations surface grinding machine NCS-P2/2. Strap length 6300mm & belt width 200mm. Year of construction: 1979. Connection voltage 400V. Transport speed adjustable. End magnetization device and two magnetic disks from 2003.

Combined belt grinding and tube grinding machine with abrasive belt K 40 - with 7 abrasive rollers. 20, 28, 32, 41, 48, 60 and 76mm Sanding belt direction Left/right Belt width 100 mm Belt length 2000 mm Belt speed 15/30 m/sec Pipe diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.5 /3.3 kW Machine weight approx. 0.19 t Space requirement approx. 1.2 x 0.75 x 0.7 m Condition: never used / new (5) Auction-ID: A7-50523-703

1 pc. universal whetstone (20mm wide) 1 pc. grindstone for HSS steel (40mm wide) Grinding wheel diameter 150 mm Grinding wheel width 20 + 40 mm Mounting diameter 12.7 mm Connection voltage 230 V Motor power 0.25 KW Weight 16 kg Dimensions L x W x H 0.37 x 0.2 x 0.24 m Condition: never used / new (5) Auction-ID: A7-50523-784

Double bench grinder: Grinding wheel grit: 36 and 80 Grinding wheel diameter max. 200 mm Grinding wheel width 32 mm Pick-up diameter 30 mm Connection voltage 230 V Motor power 0.9 KW Condition: never used / new (5) Auction-ID: A7-50523-929

Auction-ID: A1-49889-245

Auction-ID: A1-49889-246

Articulated arm with Metabo grinder mounted on measuring table table 1500 x 1000 x 800mm Metabo straight grinder GE710 Plus speeds 10000 to 30500rpm articulated arm working range max. 1400mm see pictures Auction-ID: A7-50523-751

125mm cordless angle grinder, unused Auction-ID: A1-40421-333

equipped with extraction Auction-ID: A1-50090-60

Belt sander with contact disc: 600 x 75 mm Belt width 75 mm Belt length 2000 mm Belt speed 30 m/sec Total power requirement 3 kW Machine weight approx. 70 t Dimensions approx. 1.2 x 0.5 x 0.75 m Condition: never used / new (5) Auction-ID: A7-50523-701

Technical data: Motor: three-phase asynchronous motor Motor voltage: 220 V Δ / 380 V Y Engine power: 4 hp / approx. 2.94 kW Frequency: 50 Hz Engine speed: 2,800 rpm Operating Mode: Continuous Operation Used condition with age-related signs of wear, paint damage and partially visible surface corrosion. Auction-ID: A1-50529-78093

Double bench grinder: Grinding wheel grit: 36 and 80 Grinding wheel diameter max. 150 mm Grinding wheel width 25 mm Pick-up diameter 32 mm Connection voltage 230 V Motor power 0.5 KW Condition: never used / new (5) Auction-ID: A7-50523-789

belt width 75 mm; 400 Volts; Auction-ID: A1-44050-104

Belt sander: This machine can also be mounted without a base. Therefore, it is suitable as a table belt sander. Belt width 100 mm Belt length 1220 mm Belt speed 1140 m/min.Package size max. 0.62 x 0.4 x 0.35 cm Total power requirement 1.5 kW Machine weight approx. 0.04 t Dimensions L x W x H 0.97 x 0.67 x 0.37 m Condition: never used / new (5) Auction-ID: A7-50523-706

Belt sanding machine with contact disc: 200 x 75 mm - Surface grinding table continuous: 75 mm Belt width 75 mm Belt length 2000 mm Belt speed 37 m/sec Total power requirement 3 kW Machine weight approx. 0.105 t Space requirement approx. 1.2 x 0.5 x 1.0 m Condition: never used / new (5) Auction-ID: A7-50523-788

125mm cordless angle grinder, unused Auction-ID: A1-40421-334

Belt sander with contact disc: 600 x 150 mm Belt width 150 mm Belt length 2000 mm Belt speed 33 m/sec Total power requirement 4 kW Machine weight approx. 100 t Dimensions approx. 1.2 x 0.5 x 0.85 m Condition: never used / new (5) Auction-ID: A7-50523-730

Drill bit grinder: Additional station for grinding back the drill cutting surface (free angle) 25tk. Collets ER 40 are included, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and carbide with a TiN layer of 8 - 32 mm.Rotor with precision ball bearings guarantees smooth running. Vibration-free running due to high weight and rubber feet. Sharpening angle adjustable for all common twist drills. Packaging dimensions: 430 x 240 x 240mm. Weight 16Kg.Grinding range 8 - 32 mm Sharpening angle min./max. 90 - 140 degrees Connection voltage 230 V Condition: never used / new (5) Auction-ID: A7-50523-841

Grinding wheel diameter max. 300 mm Speed 1390 rpm Connection voltage 400 V Motor power 2.2 KW Condition: untested Auction-ID: A7-50523-739

CFS grinder, type: UniGrind 250-L, machine number: 5000065420, year of construction: 04/07, 400 V, 3 Ph, 50 Hz, 105 A, 56 kW, plate diameter: 250 mm, total dimensions: 2750 mm x 1550 mm x 2250 mm. Including tool trolley, dimensions: 1350 mm x 770 mm x 750 mm. Switch cabinet, dimensions: 1000 mm x 800 mm x 370 mm.

Carnitech frozen block grinder, type: CT 3126.02, number: 26864.00, year of construction: 2011, infeed clearance: 1100 mm x 1100 mm, plate diameter: 280 mm, total dimensions: 3600 mm x 1400 mm x 2540 mm. Including tool trolley, dimensions: 1310 mm x 600 mm x 1230 mm. S/s platform, 5 steps, working height: 1230 mm, dimensions platform: 1800 mm x 740 mm x 2300 mm. Sew-Eurodrive motor: 1200 mm x 850 mm x 630 mm. parts: 1200 mm x 800 mm x 800 mm.

Good condition Auction-ID: A1-50540-206

Diameter of Cutting Wheel 300mm; cutting wheel thickness:90mm; Cutter Depth Below Ground 225mm; Cutter Depth Above Ground 515mm; width of the machine 760mm; The Qty of Teeth: 9PCS; tyre size:13\"; Brake:Drum Brake; Belt:two pcs V belt; Engine Type: OHV 4-stroke; Starting System: Recoil; Displacement: 420cc Max. Output: 3600rpm Fuel Volume: 6.5L; Oil Volume: 1.1L; Fuel Type: Unleaded Gasoline; DUCAR engine; kit; unused; 6470 Auction-ID: A1-50533-179

Gasoline/petrol; 15hp four strokes; 6.5L tank; drume brake; cutting depth 235mm; kit; unused; 6470 Auction-ID: A1-50533-4

Diameter of Cutting Wheel 300mm; cutting wheel thickness:90mm; Cutter Depth Below Ground 225mm; Cutter Depth Above Ground 515mm; width of the machine 760mm; The Qty of Teeth: 9PCS; tyre size:13\"; Brake:Drum Brake; Belt:two pcs V belt; Engine Type: OHV 4-stroke; Starting System: Recoil; Displacement: 420cc Max. Output: 3600rpm Fuel Volume: 6.5L; Oil Volume: 1.1L; Fuel Type: Unleaded Gasoline; DUCAR engine; kit; unused; 6470 Auction-ID: A1-50533-180

Gasoline/petrol; 15hp four strokes; 6.5L tank; drume brake; cutting depth 235mm; kit; unused; 6470 Auction-ID: A1-50533-532

✨✨ Fein MSf 642/CB1487 Angle Grinder Flex Auction-ID: A1-50540-244

grinding wheel diameter:400 mm total power requirement:3 kW weight of the machine ca.:1,5 t dimensions of the machine ca.:1,5 x 1,4 x 1,3 m Dressing Grinder for gears REISHAUER AM max. width of grinding wheel 104 mm max. dia. of grinding wheel 400 mm max. module 7 min. module 0,5 pressure angle 10 - 30 ° grinding worm dia. 270 - 400 mm width of grinding worm 62/84/104 mm grinding worm turning speeds: at profiling 18/35/70 U/min electrics - voltage/frequency 380 / 50 V/Hz long. movement of crowning device 156 mm

sanding belt length:max. 470 mm workpiece dia.:600 mm table - swivable:0 - 6 Grad taper:Reitstock Morse 2 turning speed range::1260 - 3100 U/min table movement:längs 470 mm tool taper:schwenkbar 0-6 °, 90° dre total power requirement:0,4 kW weight of the machine ca.:950 kg dimensions of the machine ca.:1100 x 1100 x 1500 mm Documents:vorhanden

Control: SIEMENS 840D Max.turning length: 450 mm Max swing diametr over bed/Slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l M

Control: Heidenhain Max.turning length: 450 mm Max swing diameter over bed/slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l Ma

4 GUIDEWAYS LIVE TOOLS C AXIS CNC Siemens Sinumerik Center height mm 450 Max. swing diameter mm 800 Max. turning diameter mm 600 Center distance mm 8.290 TRAVELS X-axis travel mm Z-axis travel mm 8,400 Y-axis travel mm +/-15 mm SPINDLE Spindle nose mount ASA 11'' 4-jaw independent chuck diameter mm 700 Bar passage mm TURRET 12 positions Model Baruffaldi VDI 60 Live tools 6 positions MOTORIZED TAILSTOCK Quill diameter mm DIMENSIONS: Overall size mm 12.740x3.080xH 1.725 Weight COMPLETE WITH: Heidenhain optical scale Z axis n.1 steady rest diameter mm 320 n.1 steady rest diameter mm 600 n.1 steady rest diameter mm 740 Chip conveyor Auction-ID: A1-48745-13

Machine number: 2355 Operating voltage: 400 V Frequency: 50 Hz Rated current: 125 A Connection: 45 kW Control: SIEMENS SINUMERIK Center height: 320 mm Center width: 3000 mm Max. grinding length: 3000 mm Grinding spindle diameter: max. 620 mm Grinding spindle tool holder: 80 mm diameter, taper 1:5 Swivel capability: +- 10° Workpiece spindle bore: MORSE K 6 mm Swivel capability: +30° incl. extensive item spare parts and accessories, documentation, grinding wheels, belt filter system, extraction and filter Hours read: 2667 Attention: the machine can be transported on a standard truck up to 3000 mm wide ! Auction-ID: A7-49089-231

Machine number: 2356 Operating voltage: 400 V Frequency: 50 Hz Rated current: 125 A Connection: 45 kW Control: SIEMENS SINUMERIK Center height: 320 mm Center width: 3000 mm Max. grinding length: 3000 mm Grinding spindle diameter: max. 620 mm Grinding spindle tool holder: 80 mm diameter, taper 1:5 Swivel capability: +- 10° Workpiece spindle bore: MORSE K 6 mm Swivel position: +30° incl. extensive batch Tips in different sizes, matching steady rests, documentation, belt filter system, suction Hours read: 2355 Attention: the machine can be transported on a standard truck up to 3000 mm wide ! Auction-ID: A7-49089-235

Manufacturer: BURKHARDT + WEBER GmbH Model (Typ): MC 100 S0 Machine Type: CNC Horizontal Machining / Boring Center (floor-type) Country: Germany Delivery Date: July 1992 Series: MC Series (Modular Machining Centers) Travels X (Column travel): ~3,000 – 5,000 mm Y (Vertical): ~2,000 – 2,500 mm Z (Ram): ~800 – 1,200 mm W (Spindle quill): ~500 – 800 mm Spindle Diameter: 100 mm (this is what MC 100” refers to) Spindle Taper: ISO 50 / SK50 Spindle Speed: ~2,000 – 3,000 rpm Main Motor Power: ~30 – 50 kW Auction-ID: A1-49922-14

Machine type: Vertical machining center Control: Heidenhain, Table load: 500 kg Tool magazine: 24 places The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself. Auction-ID: A1-50085-3

Used, untested. Documentation and instruction manual available. Equipped with automatic stop. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-12

Leadwell LTC-50CL CNC Lathe (10/2006) Manufacturer: Leadwell Type: LTC-50CL CNC Lathe Year of manufacture: 10/2006 Control: Fanuc, Tip width 2m Turning diameter of tip parts : Ø 700 x 2035 mm (above bed Ø 900) Turning diameter of chucks : Ø 800 x 500 mm Bezel, self-centering : Ø 35 to 240 mm Tool turrets : 12 tools Main spindle drive / gearbox : 2 stages, 1400 rpm, 37 KW Incl. chip conveyor, tailstock, tool turret & other accessories Auction-ID: A7-50270-5

Technical data: Turning diameter over bed: 1260 mm Turning diameter at opening: 2700 mm Turning diameter at the pit: 3800 mm Turning diameter via slide: 900 mm Turning length: 4000/5000 mm

Technical data: Diameter over bed: 625 mm Turning length: 1500 mm Diameter via slide: 325 mm Spindle head shape: Cam-Lock Spindle drilling diameter: 105 mm

The machine is equipped with controlled B-axis smallest delivery 0.001, swivel range 340, controlled workpiece spindle stick (C-axis)smallest delivery 0.05, max. 42 rpm, equipped with an external grinding spindle (left and right spindle end), 1 internal grinding spindle. For an additional charge, a second internal grinding spindle can be delivered. Z-way 680 mm, X-way 255 mm, smallest delivery of the axles 0.001 mm. Tip height 175 mm, W.-stock MK 5, step. adjustable 1 - 1200 rpm, external grinding spindle 1000 - 3000 rpm, max. grinding wheel perm. 300 mm. The machine is suitable for ideal for the processing of carbide and technical ceramics (SIC and Al 2). Intermediate sale:reservations Delivery time:4-6 months

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!