cnc gantry type used for sale

; ready for immediate use

; ready for immediate use

; ready for immediate use

; ready for immediate use

; ready for immediate use

; ready for immediate use

; ready to use

Messer Griesheim Corta P 4000 4 car burner burning table: 4000mm x 3000mm free loading; ready for immediate use

; Available from 37 KW 2016

Portal bridge SATRONIK HD 4000 CNC web control CNC 3000M - driving along reference limit switch in X and Y direction - double-sided racks for existing track rails for cutting lengths of 13m (16 m racks) plasma inter Lock circuit for a plasma power source plasma system Kjellberg Fine Focus 800 , cut up to 80mm (cutting data see PDF) -suction-cutting table 3200 x 13200 mm - 2 tables a 1600 mm next to each other filter system type DOWNFLO DFPRO 12- ZU 562 (external installation) The system is under current . Dassembly and commissioning on request; ready for immediate use

Manufacturer: SAF Type: Oxytome 30 Working range: 6000 x 3000 mm Technology: Plasma oxyfuel Built: 2001 Equipment Hardware: 1x SAF Nertajet HP 125 Only very little use 2x SAF Nertajet HP 300 connected in series 1x autogen burner Without fuel cutting tables without filter system Div. Wear parts equipment Control & Software: DIGISAF 500 Machine control Other information: System is available from week 33 cutting performance see PDF assembly and commissioning on request; ready for use from KW 33

Guide machine Manufacturer: SATO Type: SATRONIK G 1500 Control: CNC 3010 Size: 4000 x 1500 mm Year of construction: 2008 operating hours: 8,090 h (machine on) plasma plasma Source Manufacturer: Kjellberg Type: Hi-Focus 280i Additional equipment: Automatic gas control PGV 3 Year of construction: 2008 operating hours: 728 h (plasma jet on) suction system Manufacturer: Donaldson Type: Torit DCE, DFPRO 6-CYCLO Year of construction: 2008 to visitunder electricity Very good condition mining and commissioning on request; ready for immediate use

SAF Type: Multitome PMD Working area: 5000 x 2000 mm Technology: Plasma-Autogen Year : 12 / 1994 Equipment Hardware: SAF ZIP 5.0 (45A - 150A)(built year 12 / 2000) 1x autogen burner (interchangeable on same support) Without filter system Wear parts Equipment Control & Software: SAF Machine Control (NC System) system is available from KW 20 / 2014 assembly and commissioning on request; available from KW 20 / 2014

CNC plasma cutting system Esab Pegasus Working area: 4x2m Esab Precision Plasma 100A, with PT24 burner automatic gas mixing console (+1 complete, new gas mixing console as replacement), complete documentation; in good condition, without suction many new and original slip parts (Duesen; electrodes), as well as other spare parts. assembly and commissioning on request; ready for immediate use

CNC plasma cutting machine Euen, 2 x 3 m, year of construction Dec. 2004, Type: Eu-SPP- 2000/3000 PF b with double-sided Bosch-Laengs drive. CNC control: ANC, M767F with DNC interface for CAD/CAM systems, complete system with plasma fine beam cutting system Kjellberg FineFocus 800 to 80 mm (up to 45 mm hole piercing and quality cut), Kemper fuel table and suction filter unit, CAD/CAM system and Buero PC with DNC transfer, year construction year: Dec. as (new price of the plant 140,970 EUR) Price VB EUR +VAT from location; very good condition, as good as new

Track width: 2100 mm working width: 1500 mm working length: 3000 mm width: 2650 mm CNC Control Omnicom Explorer Color LCD Display 1 torch Plasma suspension pneumatically moving roller sampling Option : Umruestung to arc removal possible Plasma Burner head Percut 100 incl. Lantek Software Expert 2000 extraction system as good as new . The system is ready for pre-use in our factory hall; ready for immediate use

Plasma cutting machine ESAB working area 1500 x 3000 1 x autogen up to 200 mm 1 x Plasma Hifocus 160 i with automatic gas console. see PDF document several plasma change torches available Very well maintained from: 10 / 2012; ready for use

Burner types: PT - 600 and PT - 15 XLS plasma power source: ESP 200; 100-160 volts; 40-200 A cutting method underwater Plasma cutting cutting table L:6,7xB:1,63xH0,79m Trafo ESAB ESP200 L:1,05xB:0,55xH:1.1m/330kg Portal; Rails x-way 7500 mm y-path 2700 mm Welding speed 2-750 IPM m/min Control CNC Vision 1000 cutting width y=max. 2438 mm thickness unleg. Steel=50.8 mm thickness of alloyed steel=38 mm thickness Alu=32mmmm burner cod1 piece Adjustment burner=approx. 150mmmm Total power requirement 39.8 kVA machine weight approx. 4.0; ready for immediate use

Working range: 2500mm x 6000mm rail length: 8000 mm track width: 3000 mm racks and drive pinion renewed at the end of 2011. Last recovery at the end of 2011. Control Sato CNC 3000 2 x Autogen 1 x Plasma Kjellberg 160 i with automatic gas console (see Pdf) 1 x Support for koerning Complete with table and suction assembly and commissioning on request ; ready for immediate use

Working range : 2500mm x 6000mm 1 x Autogen 1 x Plasma 1 x Drilling unit HP Digital Process Control Plasma Source: Nertajet HP 125 Machine burner OCP 150 Without table and suction Option: suction table and filter unit assembly and commissioning on request; ready to use

Microstep CNC plasma and cutting system working area: 6000mm x 1500mm+800mm 1 x Plasma support ( Hifocus 160i Kjellberg with automatic gas console) (cut and mark see PDF) 1 x Autogensupport incl.

; ready to use

; now ready

Sato LS 2500 CNC 3010 working range: 2000mm x 4000mm 1 x Plasma 280i Kjellberg with automatic gas console Recommended cutting range from 0.5 to 50 mm Materialstaerke (HiFocus 280i) with suction system very good condition, on request ready for immediate use

TOP STATE - OVERHAUL IN 2016! Year of construction: 2001 2D table format: 2500 x 1250 3D Max processing size: 900 mm x 2150 mm x 300 mm Power: 2000W Control: FANUC incl. cooler incl. 2D programming software + chamfer module + tube/profile module incl. training incl. commissioning incl. quick penetration incl. ball roller table with 3D cutting head incl. CNC tube axle tube and profile up to 160 mm diameter plates, chamfering 3D molded parts, tubes and profiles FE: up to 15mm Oxide-free VA: up to 8mm designed for high pressure cutting up to 20 bar no foundation required! Optional automatic loading and unloading by Mazak FMS48 is available always regularly serviced with warranty / commissioning / training

Cr Advanced Working area 2m x 6m 1 x Plasma Hypertherm HD 3070, cut up to 20mm 1 x Arcwriter marking function Cad Cam Software including suction assembly and commissioning on request; ready to use

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16 Operating hours: 5859 Technical data Distance between centres: 610 mm Swing over cross-slide: 300 mm Swing over bed: 450 mm Max. turning diameter: 525 mm Spindle hole: 52 mm Turning diameter: 210 mm Turning length: 525 mm Carriage: Longitudinal travel (Z-axis): 560 mm Transversal strocke (X axis): 135 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 6 Inner cone diameter: 32 mm Indexing time: 0.7 sec Taper in spindle:: JIS A2-5" Spindle speeds: stepless from: 60 rpm up to: 6000 rpm Taper in tailstock: Morse taper: 4 MT Spindle stroke: 80 mm Spindle diameter: 75 mm Feeds: stepless longitudinal from: 1 mm/min up to: 15000 mm/min transversal from: 1 mm/min up to: 12000 mm/min Spindle motor: 11  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Almost unused used CNC rotary axis from ISEL Automation ! By exception, a competitor's product. From a payment of a complete CNC fraes machine from ISEL due to the switch to a T-Rex CNC Fraes machine from CNC-STEP Top exact product, solid, stable processing. A few years old but top in shot. 100mm Holder for chuck 23mm Throughlet Height 320mm Width: 21 0mm Stabile cast aluminum discharge 4 Screw fasteners on the foot step motor 6.0 Ampere ! Controltable up to 48 volts Please also note our other CNC machines offers;

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS 840 D Technical data Number of axis total: 7 Number of spindles: 2 Number of revolvers: 2 Spindle nose: DIN 55026 A4 Spindle hole: 32 mm Travels: X1: 180 mm X2: 195 mm Z1: 340 mm Z2: 440 mm Y1: +40/-40 mm Y2: +40/-25 mm Y axis: 70 (-30/+40) mm Turret slide: number: 2 Number of positions turret 1: 16 Number of positions turret 2: 12 Driven tools turret 1: 16 Driven tools turret 2: 12 Spindle speeds: 6000 rpm Power of driven tools: 6 kW Spindle nose: VDI: 25 DIN 69880 Main spindle: C axis Spindle speeds: stepless up to: 8000 rpm Back spindle mobile: max. speed: 8000 rpm Power of back spindle: 12 kW Spindle motor: 7 - 9 kW Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Total power required: 25 kVA Total power required: 20 kW Machine ...

Lathe - cycle VOJUS Turntec controlled 63 bearing no 1105-02244 make VOJUS type Turntec 63 built in 1999 State second-hand machine control CNC SIEMENS 840 D storage France origin SK delivery immediately cargo base EX WORK technical details turning diameter 630 mm turning length 3000 mm control SIEMENS 840 D spindle bore 110 mm spindle speeds infinitely 2500 revs/min rapid traverse - longitudinal/plan 10/5 m / min dimensions L W H 3000 x 1800 x 1790 mm turning diameter over support 420 mm overall power demand 26 kW machine weight approx. 4,5 t description CNC - control SIEMENS 840 D SHOP TURN MULTI FIXED HOLDER 1 open, revolving bezel TURNING DIAMETER OVER SLIDE 420 MM BED 6300 TURNING LENGTH 3000 MM 2500 U/MIN

Messer Cortina Plasma and cutting machine 1 x PlasmaSupport Hypertherm HD 3070 1 x Automotive support Working area: 2500mm x 4000mm under current commissioning on request; ready to use

CNC Portal Cutting Machine Manufacturer: ESAB Type: SXE P1 3500 LH Year construction: 2001 CNC control: Vision 51 Working area: 2x6 m Track: 8 m 2 x car use burner under power to visiton request dismantling and commissioning on request; available from 37 KW 2016

Bystar 3015 5.2 KW operating hours: 30,100 h (as of April 11, 2017) cutting hours: 10,760 h (as of April 11, 2017) Year of construction: 2004 Available from: August 2017 ; ready to use

CNC plasma cutting system working range: 1500 x 3000mm OTC Superplasma 12000 Cutting up to 20mm quality cutting New control ProDNC from Micompan data transfer via USB; ready to use

Control panel for MAHO Fraea machine 500W with Heidenhain control TNC 232; New

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 210i-T Technical data Distance between centres: 2000 mm Turning diameter over cross-slide: 370 mm Swing over bed: 554 mm Spindle nose: D1-11 Spindle hole: 104 mm Maximum turning length: 2000 mm Cross slide: Longitudinal travel (Z-axis): 1920 mm Transversal strocke (X axis): 290 mm Main spindle: Taper in spindle: Camlock: D1-6 CAMLOCK Spindle speeds: number (steps): 3 from: 16 rpm up to: 1800 rpm Taper in tailstock: Morse taper: 6 MT Spindle stroke: 178 mm Spindle diameter: 95 mm Rapid traverse:: 10 m/min Spindle motor: 11 / 7.5 kW Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3300 mm Width: 1800 mm Height: 1700 mm Various accessories: 3-jaw chuck diameter: 400 mm 4-jaw chuck diamet ...

Zinser LK 110 Photo-optical cutting and plasma cutting system. The system has been upgraded from a control point of view. Cutting is possible via Photokop as well as via Cad / Cam Sytem possible. Optionally, autogen or plasma can be cut. Plasma source : Kjellberg PAS 45 W (cut up to 45mm) suction cutting table: 1.5 x 3m (new) including control PC with Cad/cam system Complete machine bridge available as spare part dispenser. Under electricity to visit .; ready for immediate use

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Operating hours: 2330 Technical data Number of spindles: 2 Number of revolvers: 2 Distance spindle nose: 250 - 870 mm Maximum turning length: 160 mm Max. turning diameter: 130 mm Turret carriage: Carriage 1: Longitudinal travel (Z-axis): 200 mm Longitudinal travel (X-axis): 180 mm Transversal travel (y-axis): +/-30 mm Carriage 2: Longitudinal travel (X-axis): 180 mm Cross travel (z-axis): 620 mm Y axis: +/-30 mm Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 6 Driven tools turret 2: 6 Spindle speeds: 3600 rpm Power of driven tools: 3.7 / 2.2 kW Main spindle: Internal spindle diameter: 42 mm Spindle speeds: stepless up to: 5500 rpm Spindle power: 7.5 kW Back spindle: Spindle hole: 40 mm max. sp ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 18i-T Operating hours: 11069 Technical data Number of spindles: 2 Number of revolvers: 2 Distance spindle nose: 560 mm Turret slide: Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 6 Driven tools turret 2: 6 Spindle speeds: 100 - 3000 rpm Tool shank cross section: 20 mm Power of driven tools: 1.5 / 3.7 kW Max. drill capacity: 25 mm Indexing time: 0.4 sec Upper turret head: X axis: 175 mm Z axis: 305 mm Lower turret head: X axis: 132 mm Y axis: 340 mm Z axis: 155 mm Main spindle: Spindle nose: ASA 5" Spindle hole: 52 mm Inner taper type: DIN 6343 Max. bar diameter: 41 mm Max. turning diameter: 200 mm Maximum turning length: 300 mm C axis (spindle,resolution): 0.001 ° Spindle speed ...

under electricity information on request; ready for immediate use

CNC laser cutting machine Bystronic Bystar 3015 - Total power 125 KVA Co2 laser source Bylaser Power 5200 watts, CNC rotary axis for chuck 315 mm with counter bearing for pipe processing cutting power ST37 - approx. 25 mm stainless steel 1.4301 approx. 20 mm, aluminium approx. 12 mm cutting speed max. 50 m/min, positioning simultaneously max. 113m/min car. Loading device Byloader with sheet metal dusting device Only one-layer operation ! approx.27,500 power-on hours - approx. 6000 hours of laser hours; ready for immediate use

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: TRAUB SYSTEM TX 8i-p Operating hours: 46441 Technical data Number of axis total: 7 Number of spindles: 2 Turning length: 180 mm Number of axis total Max. bar diameter: 20 mm Spindle speeds: stepless up to: 8000 rpm Longitudinal travel (Z-axis): 205 mm C axis (spindle,resolution): 0.001 ° Back spindle: up to: 6400 rpm C axis (spindle,resolution): 0.001 ° Turret slide: number: 2 Upper turret head: number of tools: 8 number of driven tools: 8 Spindle speeds (turning tools): 12000 rpm X axis: 120 mm Lower turret head: number of tools: 7 number of driven tools: 7 Spindle speeds (turning tools): 6400 rpm X axis: 120 mm Z axis: 250 mm Y axis: -20 / +40 mm Counter-operation: number of tools: 7 number of driven tools: 3 Voltage 50 Hz 3x: 400 V ...

Technical data: Double column vertical turret lathe CNC control Siemens 802 D Weight 66 to 63 kw Dimensions 13,600 x 9,800 x 6,750 mm Faceplate diameter 3,500 mm Maximum workpiece height 2000 mm Max support adjustment 30 ° Maximum workpiece diameter 4,000 mm Maximum workpiece diameter with page support 3,750 mm Number of support 2 Max turning height 1,400 mm Maximum workpiece weight 25 to Max speed 30/min Min. speed 1/min

Sato LS 2000 Working Range: 2000mm x 6500mm CNC 3010 Topaz Touch Screen 1 x Plasma Ultra Cut 200 ( Cutting up to 35mm ) Donaldson Suction System. To visit . Installation and commissioning on request; ready for immediate use

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MONFORTS CONTROL SYSTEM MTC Technical data Centre height: 250 mm Distance between centres: 1500 mm Swing over cross-slide: 290 mm Swing over bed: 500 mm Taper in spindle: DIN 55027 Carriage: Transversal strocke (X axis): 265 mm Spindle speeds: number (steps): 3 from: 3 rpm up to: 2800 rpm Taper in tailstock: Morse taper: 5 MT Spindle stroke: 160 mm Spindle diameter: 80 mm Rapid traverse X: 5 m/min Rapid traverse Z: 10 m/min Spindle motor: 16.5 kW Voltage 50 Hz 3x: 400 Volt Total power required: 16 kVA Machine´s weight about: 3000 kg Various accessories: 3-jaw chuck diameter: ROTA-S 250 mm 4-jaw chuck diameter: 250 mm Set of jaws Set of jaws hard Travelling steady Lamp Tailstock Coolant system Interface serial port RS 232 Chip conveyor  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MAZATROL PC Fusion 640M Operating hours: 77200 Technical data Number of axis total: 9 Number of spindles: 2 Spindle hole: 88 mm Turning diameter: 610 mm Turning length: 1105 mm Carriage: Longitudinal travel (X-axis): 1137 mm Transversal strocke (X axis): 580 mm Transversal travel (y-axis): 210 mm Tool magazine stationary, number of tools: 80 KM 63 C axis (spindle,resolution): 0 - 360 ° / 0.001 ° Spindle speeds: stepless from: 35 rpm up to: 3500 rpm Milling cutter speeds: 10000 rpm Rapid traverse X: 30 m/min Rapid traverse Z: 20 m/min Rapid traverse Y: 15 m/min Total power required: 26 kW Machine´s weight about: 12000 kg Overall dimensions machine: Length: 5300 mm Width: 3000 mm Height: 2800 mm Various accessories: 3-jaw chuck diameter: 2 ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: NUM Technical data Spindle hole: 43 mm Carriage 1: Longitudinal travel (Z-axis): 240 mm Transversal strocke (X axis): 150 mm Transversal travel (y-axis): 100 mm Carriage 2: Longitudinal travel (X-axis): 340 mm Cross travel (z-axis): 340 mm Y axis: 100 mm Turret slide: Number of positions: 16 Number of positions turret back side: 8 Driven tools turret 1: 16 Back spindle: Voltage 50 Hz 3x: 400 Volt Total power required: 17 kW Various accessories: High pression colant device Paper filter facility Oil mist extractor Bar feeder: LNS Interface serial port RS 232 Chip conveyor Toolholders Set of toolholders Driven tool holder radial (nbr.): 5 Driven tool holder axial (nbr.): 9 Tool holder fix (nbr.): 6 Tool holder (number): 6

Laser cutting machine Bystar 3015 with Bylaser 4000 , 4 KW laser source incl. interchangeable table system, cooling system, kompl. Switch cabinet combination with CNC and laser control, operator protection in the cutting area, 2 cutting buttons, reflection absorbers, cross-jet , documentation documentation laser a 19,000 h maintained by Bystronic.