cnc gantry type used for sale

For sale is a used MAXION BT 13 ST bench drill from commercial stock. Technical data: Manufacturer: MAXION Type: BT 13 ST Year of manufacture: 01/1999 Serial No.: 166395 Drilling capacity: max. 13 mm Spindle holder: MK2 Quill stroke / drilling depth: 70 mm Projection: 180 mm Speed range: 420–2,100 rpm, infinitely variable Table surface: 230 × 170 mm Column diameter: 65 mm Total height: approx. 855 mm Motor power: 0.65 / 1.0 kW Operating voltage: 400 V Weight: approx. 65 kg The machine is in a used, age-appropriate condition. Equipment and optical condition according to illustrations. Viewing possible by prior appointment. Errors, changes and prior sale reserved.

For sale is a MAXION UNIMAX column drill, Made in Germany, in a heavy and robust industrial design. The machine is ideal for metalworking, locksmithing, mechanical engineering, maintenance as well as workshop and production operations. Technical data / equipment Manufacturer: MAXION Series: UNIMAX Production: Made in Germany Speed range: approx. 80–3,200 rpm Speed levels / ranges according to the machine shield: 80–720 rpm 160–1,460 rpm 180–1,600 rpm 360–3,200 rpm Pulleys: Ø 60 / Ø 140 mm according to the shift diagram Manual quill feed via large 3-arm hand lever Quick-release/drill chuck Solid height-adjustable work table Machine vise included Emergency stop switch Footswitch Solid machine stand with base plate CE marking The machine is in a used, age- and use-typical condition. Signs of wear and dirt are present and documented in the pictures.  ...

2 x Bench Drill Flott

Pallet with approx. 48 pieces of insulation spacers Fire resistance 120 min Auction-ID: A1-50251-473

Auction-ID: A7-50270-201

bore capacity in steel (diameter): 32 mm throat: 280 mm bore stroke: 145 mm taper MK: 3 MK table-size: 540 x 480 mm feeds: 0,08 bis 0,32 mm/U turning speeds: 180 - 2000 U/min total power requirement: 3,0 KW weight of the machine ca.: 0,9 t dimensions: 1,2 x 0,8 x 2,4 m Column drilling machine with: - Power feed - Thread-cutting attachment - Coolant pump - Machine light - Incl. machine vice - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column drill Ixion BS 30GL with reinforced motor. Year of construction: 1998. lead screw included. Also included are two drill masters, each with three threaded spindles, as well as an additional spare board.

Hand bending machine flat bar max. 16 mm square steel 16 mm round steel 16 mm Weight 45 Kg bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-50523-892

Dimensions of the containers 26 x 40 x 16 cm.Internal dimensions of the containers 23 x 35 x 15.5 cm.Thickness of the MDF top plate 10 mm.PP material (polypropylene) Storage spaces 12 boxes Condition: never used / new (5) Auction-ID: A7-50523-721

Articulated arm with Metabo grinder mounted on measuring table table 1500 x 1000 x 800mm Metabo straight grinder GE710 Plus speeds 10000 to 30500rpm articulated arm working range max. 1400mm see pictures Auction-ID: A7-50523-751

Mobile storage rack with 90 storage bins Dimensions of the red storage bins 9.5 x 16 x 9.5 cm.Dimensions of the blue storage bins 9.5 x 16 x 9.5 cm.Dimensions of the yellow storage bins 12 x 22 x 11.5 cm.Dimensions of the wheels 75 x 20 mm.Total dimensions 67 x 52 x 133 cm Condition: never used / new (5) Auction-ID: A7-50523-800

Machine vise with turntable. Jaw width 100 mm Clamping range 100 mm Clamping height 38 mm Weight 12 kg Dimensions L x W x H 260 x 140 x 120 mm Condition: never used / new (5) Auction-ID: A7-50523-865

Auction-ID: A1-50529-4

Universal tool trolley with 6 storage locations. Overall dimensions 99 x 40 x 87 cm. Container dimensions 26 x 40 x 16 cm.Internal dimensions container 23 x 35 x 15.5 cm.PP material (polypropylene) Equipped with four wheels, two castors with brakes. Condition: never used / new (5) Auction-ID: A7-50523-888

Dimensions of the containers 26 x 40 x 16 cm.Internal dimensions of the containers 23 x 35 x 15.5 cm.Thickness of the MDF top plate 10 mm.PP material (polypropylene) Storage spaces 12 boxes Condition: never used / new (5) Auction-ID: A7-50523-762

Shelf with 60 storage boxes. External dimensions of the boxes 100 x 295 x 105mm. Packaging dimensions 420 x 340 x 930mm. Weight approx. 30 kg. Storage spaces 60 boxes Weight 30 kg Dimensions L x D x H 780 x 320 x 1670mm Condition: never used / new (5) Auction-ID: A7-50523-729

HS DIALOG Digital control Control: Dialog touch 12\" incl. two sonotrodes (1:2 and 1:0.4) incl. additional control Dialog touch 12\" Instruction manual available Auction-ID: A1-50529-13

bore capacity in steel (diameter): 35 mm throat: 330 mm bore stroke: 180 mm table surface area: 765 x 620 mm 0: 130 - 1750 U/min feed: 0,1 - 0,2 - 0,3 mm/U tool taper: MK 4 total power requirement: 3,0 kW weight of the machine ca.: 0,7 t dimensions: 1,2 x 0,8 x 2,15 m Drilling machine with: Power feed 2 gear stages Tapping attachment Footswitch Machine light Coolant system Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

double-table traveling column boring machine Software/CNC: Siemens Sinumerik 840D X: 18000 mm - Y: 5000 mm - Z: 1750 mm - W: 1400 mm - B: 360° - V: 3000 mm - U: 400 mm Table dimensions: 4000x3000 maximum workable height 5000mm

1 gebr. Column drill, Flott SB 23 Technical data (Flott SB 23) • Drilling capacity: approx. 23 mm to 25 mm in steel (continuous drilling capacity approx. 23 mm) • Max. drilling depth / stroke: 140 mm • Projection: approx. 300 mm • Spindle holder: MK 2 (Morse taper 2) • Speed range: Variable depending on the version (often approx. 100 to 2,000 rpm via gearbox/V-belt) • Column diameter: approx. 82 mm to 125 mm (depending on the construction generation) • Work table: approx. 415 x 385 mm (with T-slots, height adjustable by hand crank) • Motor power: approx. 0.9 kW to 1.4 kW (pole-switchable) • Electrical connection: 400 V / 50 Hz (three-phase current) • Machine weight: approx. 220 kg to 280 kg • Total height: approx. 1,950 mm

Second-hand Weinig / Raimann Unirip 310 multi-blade saw for professional cutting and machining of timber in industrial woodworking. The machine is designed for typical rip-cutting operations using multiple saw blades and is fitted with the Quickfix system for rapid hydraulic clamping. Technical data: Cutting width: 310 mm Motor: 30 kW Spindle diameter: 65 mm Feed rate: 5–35 m/min Chain width: 340 mm Cutting height: max. 115 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

bore capacity in steel (diameter): . mm throat: 368 mm bore stroke: . mm feed: 0,1-6,18 m/min table surface area: 560x470 mm Thread-cutting device The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 27 mm, 36 , 1200 U/min

Warehouse – No. 2875 1 used, in 2026 Partially overhauled and function-tested compounding granulation line, consisting of: Brabender grav. Dosage 2-components (expandable, optional vs. surcharge) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 control stand-alone Extruder Twin Screw Leistritz Type ZSE 27 HP Synchronous, seal-combing, segmental screw and barrel with intensive cooling. Screws 2x Ø 27 mm- 36 L/D with 8 cylinder zones with 3x degassing zones, 1x vacuum pump 1.5 kW Screw speed up to 1,200 rpm.-1 – adjustable Extruder drive 33.8 kW - Heating capacity 9.8 kW installed Mass pressure sensor Control Macromatex III MAAG Gala Underwater Pelletizer Type LPU Model SLC 5, incl. Polymer start-up valve with hydraulics Perforated plate 20°, granulator SLC 5 with drive 1.5 kW Water Box - Temperate water system with Granule Centrifugal Dryer Type 1150, Driv ...

Powerful Hobart PROFI AMXXS-10A hood type dishwasher for professional use in restaurants, hotels, canteens and commercial kitchens. The high-quality basket pass-through machine combines high washing performance with short programme running times and convenient operation. Thanks to the integrated water softening, it is particularly suitable for reliable continuous use in regions with medium or high water hardness. • Manufacturer: Hobart • Model: AMXXS-10A • Year of construction: 2016 • Professional hood and basket pass-through machine • Integrated water softening • Output: up to approx. 70 baskets per hour • Basket size: approx. 500 × 500 mm • Short wash programs for a fast workflow • Robust and hygienic stainless steel design • Connection: 400 V / 50 Hz / 3N • Connected load: 16.3 kW / 31.8 A • Alternatively configurable: 10.1 kW / 22.8 A • Degree of protec ...

3x TYP X platform trolley for block pallets Auction-ID: A1-50076-336

Auction-ID: A1-40321-26

Valuation report drawn up in May 2026; The car has a final MOT inspection; in 2027 this classic car will be MOT free; is already road tax free! Various documents transferable such as MOT reports; import document 1993; customs clearance forms; this iconic Rolls-Royce Silver Shadow II from 1977 on offer. A masterpiece of British automotive history, designed for the enthusiast who appreciates style, status and history. Why this Silver Shadow II? Already tax-free (MRB): Thanks to its age, you enjoy a completely tax-free possession, which makes this classic not only impressive, but also surprisingly advantageous in terms of fixed costs. (Almost) MOT-free: Built in 1977 means that this car will celebrate its 50th anniversary in 2027 and thus definitively switch to the full MOT exemption! The refined 'Series II': Introduced in 1977 with significant improvements over its predecessor, including  ...

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMaximum load (table centre)1000 KgSpeed max.12000 rpmDrive power (100% DC)11 kWDrive power (25% DC)15 kWTool Magazine with60 PositionsSpindle taperBT 40 Movement X / Y / Z1100/560/510 mmRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont) Spindle Taper 7/24 Taper #40/ Grip MAS <BT40>Spindle Taper 7/24 Taper #40/ Grip MAS <BT40> This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately. Retention Kn ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal350 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmTorque (40% DC) 48 NmSpeed range 20 - 15000 rpmSpindle taper BT 30 Clamping System ISO 7388-3 - JD30 Toolchangertoolchanger Type of magazine Wheel Number of tools 15 TableTable surface 740 x 420 mmMaximum load (table centre) 400 KgPreparation NC-Devider EA510 indirectPreparation 4.th axis Lehmann EA 510.L indirect measuring System Attention: Customer specific optimisations and adjustments are not part of delivery! Chip removal package with chip conveyorChip removal package with chip conveyor ...

GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabin DMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampi Tool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard) Number of tools 150 Preparation measuring probe T ...

GeneralVertical-Machining centre Stealth Design; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal1450 mmCross700 mmVertical550 mmIntegrated motor spindle speedMASTER®Integrated motor spindle speedMASTER® At speeds > 18.000 min-1, the use of tools with dual contact system (BIG-PLUS®) is stipulated. Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTorque (40% DC) 130 NmSpeed range - 20000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-A Clamping System DIN ISO 7388-3-AD TableTable surface 1760 x 750 mmMaximum load (table centre) 1500 KgSlot width 14 mmNumber of Slots 7 Distance between T-Slots 100 mmCabin roofCabin roof In sheet steel design Open and close via front door Special equipmentClampin ...

GeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with40 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgSpindle speed 20 - 12,000 rpm SK50, 288NmSpindle speed 20 - 12.000 rpm SK50 for tool taper according to DIN ISO 7388-1-A50 with power 44/32 kW // 59.0/42.9 hp with torque 288/187 Nm (40/100% DC) (differently from standard) Tool magazine 40 pocketsTool magazine 40 pockets SK50 chain magazine with pockets and double gripper, incl. manually direct loading into the tool magazine Coolant-air blast change-overCoolant - Air-blast changeover external switchable via M-Function Air blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil rate Internal coolan ...

GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal650 mmCross520 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools30 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmSpindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possible Tool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper ...

GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal650 mmCross520 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) Tool magazine 60 pockets HSK-A63Tool magazine 60 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct ...

GeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with30 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgSpindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possible Tool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper, incl. manually direct loading into the tool magazine Coolant-air blast change-overCoolant - Air-blast changeover external switchable via M-Function Air blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil  ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 200 l(left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwhe Air coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline X Multi-Touch control CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minSpindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 200 l(left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwhe Air coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-F ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Production Package 40 barProduction Package 40 bar Option includes: - Internal coolant supply 40 bar; - Tank capacity: 600l with papertype filter; - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - Tool clamping buttons on the headstockTool Clamping and Unclamping Buttons placed on the Headstock Cover Air coolant internal (through spindle centre)Air C ...

GeneralVertical Machining centre; Control: Control SIEMENS ERGOline IV CharacteristicsTable surface1400 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z1100/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 220 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwh Air coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with lo ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Touch Probe Heidenhain TS 460Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipment Touch probe Heidenhain TT160Touch Probe HEIDENHAIN for tool length and diameter measurement Option includes: - TT160 probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool Note: Additionally ...

bore capacity in steel (diameter): . mm throat: 285 mm bore stroke: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minSpindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Production Package 80 barProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - E Active cooling systemActive cooling system for selected mechanical components in order to increase machine thermal stability Air c ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmSpeed max.10000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)43 NmMax. torque64 NmTool Magazine with24 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mWeight approx.5600 KgSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

GeneralVertical-Machining centre Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal1450 mmCross700 mmVertical550 mmTool changerType of magazineWheel Type of gripperDouble gripper Number of tools30 TableTable surface 1760 x 750 mmMaximum load (table centre) 2000 KgSlot width 14 mmNumber of Slots 7 Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) Tool magazine 30 pockets HSK-A63Tool magazine 30 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct tool loading into the tool magazin ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal700 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minSpindle speed 24,000 rpmSpindle 24,000rpm with tool taper ISO 7388-2 - J30 BT30 / BBT 30 (BIG PLUS) possible for pull-studs ISO 7388-3 - JD30 (MAS 403-45°) at spindlespeed higher than 20.000 rpm BBT 30 (BIG PLUS) stipulated! AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spin Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-ax Rot ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmSpeed max.12000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)57 NmMax. torque83 NmTool Magazine with24 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm) SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872 Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperature Electronic HandwheelExternal electronic Handwheel

GeneralHorizontal machining centre - Horizontal milling head; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical900 mmCabineFull protection cabin Direct measuring systemDirect path measuring system NC rotary table with pallet changerType of Measuring system Direct measuring system Table surface 630 x 630 mmCentre bore 50 mmMaximum load (table centre) 900 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degreePackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)  ...

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmMaximum load (table centre)600 KgSpeed max.12000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)54 NmMax. torque82 NmTool Magazine with30 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z600/560/510 mmRapid feed X / Y / Z30/30/30 m/minDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mWeight approx.5200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System DMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the h Safety Package for Power FailureSafety Package for Pow ...

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface1100 x 560 mmMaximum load (table centre)800 KgSpeed max.12000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)57 NmMax. torque83 NmTool Magazine with30 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z800/560/510 mmRapid feed X / Y / Z30/30/30 m/minDimensions (L x W x H)3,3 x 2,7 x 2,94 mWeight approx.5550 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System inlineMASTER® spindle 12.000 rpminlineMASTER® spindle 12.000 rpm Spindle speed range 20 to 12.000 rpm Tool Taper SK40 DIN69871 with BIG PLUS inteface Tool clamping according to DIN69872 Power: 13kW (40% DC) / 9kW (100% DC) Torque: 83 Nm (40% DC) / 57 Nm (100% DC) bearings oil-air lubr SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872 N ...

GeneralHighly productive compact machining centres; Control: Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical1-60000/1-60000/1-60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross420 mmVertical380 mmMiscellaneousClamping SystemMAS 403 - 45° Floor space/WeightDimensions (L x W x H)1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) mWeight approx.4100 KgSpindle speed up to 24,000 r.p.m. BT30Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan) TableTable surface 840 x 420 mmMaximum load (table centre) 300 KgSlot width 14 mmNumber of Slots 2 Clamping grid M 12, 100 x 100 mmTool clamping for BBT 30 (Big+)Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45° Tool magazine 25 placesTool magazine 25 places (su ...