cnc folding used for sale

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-axis travel: 810mm, Y-axis travel: 610mm, Z-axis travel: 610mm, rapid traverse: 30m/min, tool holder: SK40/DIN 69871A, pull stud: DIN 69872A, tool changer: 32 tools, program memory expansion: 64MB (ATA memory card), machine color: RAL 7035/5008, mains voltage: 400V, mains connection: 3/PE~ (three-phase AC with protective earth), mains frequency: 50/60Hz, operating current (I_B): 50A, rated current (I_N): 50A, programming interface: Siemens ShopMill, max. spindle speed: 8,000rpm, screen: 10.4-inch color display, control system: Siemens 810DE PowerLine, operating hours: 37,506h, including documentation. On-site inspection is possible.

Drive: servo motors, individually for each axis, max. number of bending slides: 8, spring steel wire diameter: 0.2-1mm, copper wire diameter: 0.3-2mm, max. winding mandrel diameter: 10mm, max. winding spindle travel: 45mm, max. length of rotating initial leg: 50mm, end leg length: theoretically unlimited, winding spindle revolutions: limited by the winding spindle travel of 45mm, control system: 4-axis CNC positioning control Pronumerik Schleicher, the machine operates using DOS-based programming, including pay-off reel, accessories, operating manuals and documentation, well-maintained and in good condition. On-site inspection is possible.

sliding headstock CNC lathe, year 2012, 16311 operating hours, CNC 31i-MODEL B5. Used machine. More info & price on IndustrialBuyer.

turning diameter: 470 mm turning length: 2500 mm control: Siemens Sinumerik 840 D work height max.: 1300 mm swing diameter over bed slide: 750 mm swing over bed: 780 mm diameter of quill: 160 mm taper bore: MK 5 tool numbers: 48 weight of tools max.: 15 kg tool length - max.: 500 mm total power requirement: 123 kVA weight of the machine ca.: 27 t dimensions of the machine ca.: 8,4 x 4,0 x 3,3 m C-axis: - Speed range 0.1 - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis 0.1 - 18000 mm/min - Z-axis 0.1 - 30000 mm/min Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle dr ...

Milling machine Cincinnati Milacron Sabra 750 BJ 1998

STAR SW 20 ist eine CNC-Langdrehautomat mit hoher Präzision, großer Genauigkeit und Zuverlässigkeit. Kapazitäten: 11 Achsen, 2 Spindeln, max. Bearbeitungsdurchmesser 20 mm, Gegenspindel bis 10.000 t/min. Technische Daten: Spindel 3,7 kW, angetriebene Werkzeuge 1,2 kW (8.000 t/min), Schlitten 7 und 5 Positionen, Gegenbearbeitung 8 Werkzeuge (6 angetrieben), Eilgang 35 m/min, Anschluss 50 Hz 3x380 V, Gewicht ~3400 kg, Maße L2600×B1150×H1765 mm. Zubehör: Stangenlader, Lampe, Kühleinheit 150 l, Ölnebelabsaugung ELBARON, Schnittstelle Stangenlader. Erreicht enge Toleranzen; Branchen: Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

X-axis: 260mm, Y-axis: 100mm (±50mm), Z1-/Z2-axis: 800/800mm, swing diameter over bed: 660mm, swing diameter over cross slide: 540mm, distance between spindle noses: 1050mm, max. turning diameter: 500mm, max. workpiece length: 1000mm, max. bar capacity: 65mm, spindle speed: 0-5,000rpm, torque: 25Nm, drive power: 6.7kW, number of driven tools: 12, number of tool stations: 12, shank diameter for boring bars: 40mm, tool change time: 0.7s, speed range of driven tools: 0-12,000rpm, torque of driven tools: 30Nm, drive power of driven tools: 10kW, compressed air connection: 6bar, connected load: 40kVA, control: Sinumerik 810D PCU20, length: 3320mm, width: 2070mm, height: 2341mm, total weight: 8.45t, operating hours: 89,129h, with documentation and service reports, regularly maintained. An on-site inspection is possible.

A CNC laser cutting machine with a 5kW CO₂ laser and automatic loading and unloading system is offered. Working area X/Y/Z: 4000mm/2000mm/115mm. Laser power: 5000W. Laser unit: CO₂ laser TLF 5000. Max. sheet thickness mild steel: 25mm. Max. sheet thickness stainless steel: 20mm. Max. sheet thickness aluminum: 15mm. Operating hours: Laser-on hours: 39625h. Beam-on hours: 14346h. Control: Siemens Sinumerik 840D. The system is equipped with an automatic loading system that supports sheet metal handling. Inspection possible by prior arrangement.

sheet width: 6500 mm plate thickness: 3 mm back stop - adjustable: 1000 mm dimensions: 7300x2400x2300 mm Weight: 20000 kg Equipment/accessories: - 1 x set of knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TSUGAMI HS207 CNC automatic lathe was built in 2011 in Japan by TSUGAMI CORPORATION. The machine is designed for the mass production of small parts with complex geometries, used in various industries. It enables precise turning, drilling and threading of bar material with a maximum diameter of 20 mm. Machining is performed in 9 numerically controlled axes using the main spindle and a sub-spindle. This configuration enables operations to be performed on both sides of the workpiece without the need to re-clamp it. Once machining on one side is complete, the workpiece is transferred to the second spindle, which continues the operation from the opposite side. As a result, successive operations can be performed in a single cycle, which speeds up production and ensures high dimensional repeatability of the finished parts. The TSUGAMI HS207 is operated using a FANUC Series 31i-MODEL A CNC ...

STIGAL DYNAMIC plasma-gas cutting machine was built in 2014 in Poland by STIGAL Marcin Stępień. The machine is used for the precision cutting of sheet metal with a maximum thickness of 60 mm. The cutting process is performed automatically on a work table with dimensions of 3000 x 2000 mm. The CEBORA PLASMA PROF source generates a stable plasma arc, which ensures effective cutting of the material and maintains optimal operating parameters even during intensive use. A spark shield is installed next to the plasma torch to protect the eyes of the operator and anyone else in the vicinity of the operating machine. Thanks to this, the operator can carry out their work without the need to wear safety glasses during most of the cutting process. The shield is raised and lowered directly from the control panel. Fumes and dust generated during cutting are removed by an electronically control ...

Key data: 3000 mm, 1500 mm, 10000 W

10 kW fiber laser from Bystronic, which will be available from 01.02.2027. We sell our Bystronic ByStar Fiber 3015 Dynamic Edition F10000 directly from our own production facility – no dealer, no intermediate margin. The system runs in our production until handover. So you can visit it under power and see it cut with your own parts before you decide. WHY THIS MACHINE • 10,000 W fiber laser: mild steel up to 25 mm, stainless steel and aluminum up to 30 mm, brass 15 mm, copper 12 mm – one machine for everything from thin sheet to thick sheet • Dynamic Edition: 120 m/min parallel to the axis, 170 m/min simultaneously – high throughput in series and for urgent orders • Automatic nozzle changer with 64 positions + Detection Eye: set-up times reduced, low-manpower production possible • Changing table (25 s table change): loading and unloading while the machine is cutt ...

SMEC SL 2500LSY ist eine CNC-Drehmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Z-Hub 1375 mm, X 235 mm, Y 100 (+/-50) mm; BMT65-Revolver 12 Positionen; Spindelbohrung Hauptspindel 78 mm, Gegenspindel 45 mm. Technische Daten: Eilgang X 18 m/min, Y 10 m/min, Z 24 m/min; Hauptspindel bis 4500 rpm (11/18.5 kW, 313 Nm), Gegenspindel bis 6000 rpm; angetriebene Werkzeuge 5000 rpm (3.7/5.5 kW, 95 Nm); Anschluss 3x400 V 50 Hz, 45 kVA; Gewicht ~7800 kg; Abmessungen 4125×2030×2090 mm. Zubehör: 3-Backenfutter, Kühlmittelsystem, Späneförderer, Satz Werkzeughalter. Erzielt enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizintechnik, Uhren- und Maschinenbau. Technische Daten ohne Gewähr

USED KITAMURA KNC 250YS CNC Lathe Main Spindle Bar Diameter: 42 mm Spindle Nose Type: A2-5 Spindle Power: 7.5 kW Spindle Speed: 100 - 5000 RPM C-Axis Indexing: 0.001° Counter Spindle Spindle Power: 3.7 kW Spindle Speed: 100 - 5000 RPM C-Axis Indexing: 0.001° Turret 1 Turret / 12 Stations with Rotating ToolsAxis strokes: X = 160 - Y = 70 - Z = 260 mm Equipped with 1 FANUC 18i-T CNC 1 Parts recuperator 1 Chip conveyor 1 Set of fixed and rotating tool holders 1 IEMCA BOSS 542 bar feeder Machine dimensions and weight : 3800x2000xH1800mm - weight 4000kg + 1 pallet 200kg Auction-ID: A1-50950-34

USED BIGLIA B436 Y2 CNC lathe Serial No.: 11804 Year: 2013 Main spindle Bar diameter: 36 mm Max. turning diameter: 100 mm Max. turning length: 100 mm Spindle bore: 46 mm C-axis: 360° indexing increment 0.001° Sub-spindle Maximum bar diameter: 36 mm Max. turning diameter: 100 mm Max. turning length: 100 mm Max Spindle Speed: 7000 RPM Spindle Bore: 46 mm C-Axis: 360° Indexing Increment 0.001° Upper Turret Number of Positions: 12 Number of Motorized Positions: 12 Axis Travel: X: 85 mm - Y: +25/-25 mm - Z: 300 mm Lower Turret Number of Positions: 12 Number of Motorized Positions: 12 Axis Travel: X: 85 mm - Y: +25/-25 mm - Z: 300 mm Equipped with 1 MITSUBISHI M700 CNC 1 Clamping on the main spindle and on the sub-spindle 1 Parts retrieval belt 1 Tool measuring arm 1 Muller 70 bar HP pump 1 Set of fixed and rotating tool holders 1 Chip conveyor 1 IEMCA BOSS 545E bar feeder Dimensi ...

USED OKUMA SPACE TURN LB3000 EX CNC Lathe Year: 2008 Main spindle Max turning diameter: 470 mm Spindle bore: 80 mm Spindle speed: 4200 RPM C-axis: 360° indexing increment 0.001° counter-spindle spindle diameter: 80 mm spindle speed: 4,200 rpm C-axis: 360° indexing increment 0.001° Turret 1 Turret / 12 stations with rotating tools Axis strokes : X=260 - Y=120 - Z=510 mm Equipped with 1 CN OKUMA OSP-200L 1 Tool measuring arm 1 Set of fixed and rotating tool holders 1 Chip conveyor 1 IEMCA MASTER 880 MAESTRO bar feeder Machine dimensions and weight : 2800x2000xH2500mm - weight 6500kg - conveyor:4200x600xH1400mm - weight 500kg - Bar feeder:4500x800xH1400mm - weight 1200 kg + 1 euro pallet 200 kg Auction-ID: A1-50950-62

USED NAKAMURA WT 100 CNC lathe Serial No.: M102006 Year: 2006 Main spindle Max bar diameter: 42 mm Max turning diameter 190 mm Max turning length: 503 mm Spindle nose: A2-5 Spindle speed: 6000 rpm Spindle power: 11/7.5 kW C-axis: 360° 360° indexing in 0.001° incrementsSpindle counter spindle Nose: A2-5 Spindle speed: 6000 rpm Spindle power: 11/7.5 kW C-axis: 360° 360° indexing in 0.001° increments Upper turret Number of positions: 12 Number of motorized positions: 12 Travels: X: 135 mm Y: +/-31mm - Z: 503mm Lower turret Number of positions: 12 Number of motorized positions: 12 Travels: X: 135mm - Z: 503mm Equipped with 1 FANUC 31i-MODEL A NC1 Set of tool holders 1 Loading and unloading table 1 Chip conveyor 1 FANUC M-10ia-7L Robot Dimensions and machine weight : 4000x2000xH1800mm - weight 5500kg + 2 pallet europe 1200x800xH1500mm total weight 600 kg + 1 pallet 2500x1000x15 ...

USED BIGLIA B445 S2M CNC Lathe Serial No.: 8272 Year: 2005 Main spindle Max bar diameter: 45 mm Max turning diameter: 240 mm Max turning length: 320 mm Spindle nose: ASA5 Spindle speed: 5000 rpm Sub-spindle Spindle nose: ASA5 Spindle speed: 5000 rpm Upper turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 170 mm - Z: 400 mm Lower turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 170 mm - Z: 400 mm Equipped with 1 FANUC 18i-TB CNC 1 Parts reclaimer 1 Chip conveyor Dimensions and weight Machine:4800x2000xH2000mm / weight: 5000 kg Auction-ID: A1-50950-3

USED NAKAMURA SUPER NTM3 CNC lathe Serial No.: L152501 Year: 2011 Main spindle Bar diameter: 65 mm Max turning diameter: 190 mm Spindle speed: 4500 rpm Spindle power: 15 kW C-axis: 0.001° indexing increment Spindle Spindle nose: A2-6 Spindle speed: 5000 rpm C-axis: 0.001° indexing increment Left upper turret Number of positions: 24 Number of motorized positions: 12 Axis travel: X=167.5mm - Y=102 mm Z=250 mm Upper right turret Number of positions: 24 Number of motorized positions: 12 Axis travel: X=167.5mm - Y=102 mm Z=250 mm Lower right turret Number of positions: 24 Number of motorized positions: 12 Axis travel: X=167,5mm - Z=685 mm Equipped with 1 FANUC 16i-TB NC 2 HP pumps 1 Set of fixed and rotating tool holders 1 CNC parts collector 1 Chip conveyor Dimensions and weight 6000x2400xH2300mm - weight 12,000 kg Auction-ID: A1-50950-58

USED GHIRINGHELLI GRINDING MACHINE TYPE M12SP610 CNC6A Serial No.: C691.04 Year: 2004 Working wheel Outer diameter of the grinding wheel: 610 mm Equipped with 1 SIEMENS SINUMERIK CN Number of CNC axes: 6 1 Gantry loading and unloading between the grinding wheels 1 Double control wheel carriage driven by 2 Bruschless motors 1 Bruschless motor on the spindle 2 CNC diamond cutters with dimension adjustment Dimensions and weight Machine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-17

USED TORNOS ENC 16 CNC lathe Serial No.: 58145 Year: 1990 Equipped with 1 SIEMENS SINUMERIK CN Rotating tools 1 TORNOS bar feeder Machine dimensions and weight : 2300x1200xH1600mm - weight 2500kg - bar feeder: 5000x700xH1300mm - weight 800kg Auction-ID: A1-50950-76

USED GHIRINGHELLI GRINDING MACHINE TYPE M200 CNC4A Serial No.: C679.03 Year: 2003 Working wheel Outer diameter of the grinding wheel: 500 mm Equipped with 1 CN SIEMENS SINUMERIK Number of CNC axes: 4 1 Gantry loading and unloading between the grinding wheels 1 Double control wheel carriage driven by 2 Bruschless motors 1 Bruschless motor on the spindle control wheel2 CNC diamond cutters with dimension adjustment Dimensions and weight Machine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-18

Used NAKAMURA Super NTJ CNC Lathe Year: 2011 Main spindle Bar diameter: 65 mm Max turning diameter: 190 mm Spindle nose: A2-6 Spindle power: 15 kW Spindle speed: 4,500 rpm C-axis indexing: 0.001° Counter-spindle Bar diameter: 51 mm Spindle nose: A2-5 Spindle power: 11 kW Spindle speed: 5,000 rpm C-axis indexing: 0.001° Stroke: 760 mm Upper left turret Number of positions: 24 Number of motorized positions: 24 Axis travel: X=345 mm - Y=+/- 45 mm - Z=1240 mm Rotating tool speed: 6,000 rpm Rotating tool power: 5.5 kW B-axis travel: +/- 91° Indexing accuracy: 0.001° Lower right turret Number of positions: 24 Number of motorized positions: 12 Axis travel: X=167.5 mm - Z=685 mm Rotating tool speed: 6,000 rpm Rotating tool power: 5.5 kW Equipped with 1 FANUC 18i-TB CNC 1 Collet chuck on the main spindle 1 Ø160mm chuck on the sub-spindle 1 Set of fixed and rotating tool holders 1 Tool ...

USED CORTINI T 120 C CNC LATHE Serial No.: T120019 Year: 1998 1 Main spindle with C-axis Bar diameter: 28 mm 1 8-station turret with rotating tools Equipped with 1 FANUC 21i-T CNC 1 Programmable tailstock 1 LNS HYDROBAR hydraulic tube Dimensions and weight Machine: : 2400x1400xH1600mm - weight 2500 kg - LNS tube: 4700x800xH1200mm - weight 450kg Auction-ID: A1-50950-10

USED MORI SEIKI NZ2000 T2Y CNC LATHE Year: 2010 Number of cutting hours: approx. 19,500 hours Main spindle Bar diameter: 65 mm Max. turning diameter: 310 mm Max. turning length: 810 mm Spindle nose: JIS A2-6 Spindle bore: 73 mm Spindle power: 25/22 kW Spindle speed: 5000 rpm C-axis: 360° Indexing Increment 0.001° Counter Spindle Bar Diameter: 65 mm Spindle Nose: JIS A2-6 Spindle Bore: 73 mm Spindle Speed: 5000 RPM C-Axis: 360° Indexing Increment 0.001° Upper Turret Number of Positions: 16 Number of Motorized Positions: 16 Axis Travel: X=210 mm - Y=110 mm - Z=300 mm Lower Turret Number of Positions: 16 Number of motorized positions: 16 Axis stroke: X=210 mm - Y=110 mm - Z=810 mm Equipped with 1 CN MORI SEIKI MSX 701 IV 1 Clamping in collet on both spindles 1 Tool measuring arm 1 Workpiece retrieval arm 27 Fixed tool holders 1 Rotating tool holder 1 Chip conveyor 1 IEMCA MASTER  ...

STUDER S-50 CYLINDRICAL GRINDING MACHINE RETROFITTED Serial No.: 511419 Year: 1988 Bench grinding diameter: 450 mm Wheel dimensions: ∅ outside 750 width 80 mm Distance between tips: 1600 mm Longitudinal stroke: 1600 mm Effective stroke transverse axis: 200 mm Rotational speed: 16-650 rpm Tilting wheel Weight: approx. 7000 Kg Equipped with 1 Complete retrofit of the NC part and motorization in FANUC Oi-TD 1 Tailstock 1 Cooling system with magnetic separator and paper filtration Dimensions and weight Machine: 4700x2600xH2100mm - bin: 1600x1200 - cabinet: 600x1500mm - 1 pallet - weight 10 000kg Auction-ID: A1-50950-73

USED FAMAR ERGO 250 CNC lathe Serial No.: 20.68 Year: 2001 Machinable part Diameter: 200mm Max. length on turret: 125 mm Max. tool block length: 200 mm Axles Axis strokes: X: 340 - Z: 215 mm Fast feeds: X: 60 - Z: 30 m/min Ball screw diameter: 40 mm Spindle Spindle nose: 6\" Spindle power S6: 30 kW Speed: 6000 rpm Max centering diameter: 350 mm Equipped with 1 CN SIEMENS SINUMERIK 1 Chip conveyor Dimensions and weight Machine: 2460x1950xH2680mm - conveyor: 4000x1400mm - Total weight: 7000 kg + 7 pallets Auction-ID: A1-50950-13

USED HARDINGE GT-CE CNC LATHE Serial No.: GT-753-B Main spindle Bar diameter: 27 mm Diameter above bed: 300 mm Spindle nose: A2-4 Spindle power: 3.7 kW Spindle speed: 60-6000 rpm Axle travel: X=281 mm - Z=304 mm Equipped with 1 FANUC 18-T CNC Dimensions and weight 1800x1500xH1800mm - weight 2500kg Auction-ID: A1-50950-24

USED GHIRINGHELLI GRINDING MACHINE TYPE M12SP610 CNC6A Serial No.: C759.07 Year: 2007 Working wheel Outer diameter of the grinding wheel: 610 mm Equipped with 1 CN SIEMENS SINUMERIK Number of CNC axes: 6 1 Gantry loading and unloading between the grinding wheels 1 Double control wheel carriage driven by 2 Bruschless motors 1 Bruschless motor on the spindle 2 CNC diamond cutters with dimension adjustment Dimensions and weight Machine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-15

turning diameter: 600 mm turning length: 1200-1280 mm control: Fanuc 210 : 400 mm spindle bore: 90 mm : 3000 U/min spindle drive motor: 18-36,5 kW x-travel: 320 mm z-travel: 1250 mm : 8 Stationen tail stock: MK5 tool taper: VDI 40 machine weight ab.: 5000- 5500 kg weight of the machine ca.: 3000 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Centerless grinding machine LIDKOPING 46 Working wheel Ø Exterior: 508 mm Width: 610 mm Control wheel Ø Exterior: 330 mm Width: 610 mm Thread work Plunge work CNC motor 0.001 Equipped with 1 Control cabinet with PLC SIEMENS 1 CNC plunge on the working wheel 1 CNC motor on the control wheel1 External lubrication pump tray 2 Hydraulic diamond cutters 1 Batten holder for working in a row Dimensions and weight Machine: 3800x2100xH1600mm - Electrical cabinet: 1000x400xH1700mm - 1 pallet - total weight 8500 kg Auction-ID: A1-50950-37

USED BIGLIA B445 S2M CNC LATHE Serial No.: 6922 Year: 2001 Main spindle Max. bar diameter: 45 mm Max. turning diameter: 240 mm Max. turning length: 320 mm Spindle nose: ASA5 Spindle speed: 5000 rpm Sub-spindle Spindle nose: ASA5 Spindle speed: 5000 rpm Upper turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 170 mm - Z: 400 mm Lower turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 170 mm - Z: 400 mm Equipped with 1 FANUC NC 1 Clamping on the main spindle and on the sub-spindle 1 Workpiece recuperator 1 Chip conveyor 1 IEMCA BOSS 545E bar feeder Dimensions and weight Machine: 4800x2000xH2000mm - Bar feeder: 4000x800xH1300mm - Total weight: 5800 kg Auction-ID: A1-50950-2

USED HARDINGE CONQUEST 42 CNC lathe Bar diameter: 42 mm Diameter above the bed: 269 mm Diameter above the carriage: 180 mm Distance between tip: 350 mm 1 Main spindle with C axis Spindle speed: 50 to 5000 RPM Stroke: X 135 mm - Z 353 mm 1 Turret / 12 stations Equipped with 1 FANUC O-TC CN 1 Programmable counter point 1 Chip conveyor 1 LNS 6/42 hydraulic tubeMachine dimensions and weight : 3200x1500xH1600mm - weight 3200kg - LNS6/42: 4800x800xH1400mm - weight 700kg Auction-ID: A1-50950-23

faceplate diameter: 7100 mm swing diameter: 8000 mm turning height: 4700 mm distance between table and cross rail: 5495 mm workpiece weight: 150 t faceplate turning speed range: 0,3 - 19 U/min main drive motor: 125 kW cross travel: 4400 mm swivel range of slides - vertical: +30 / -15 ° Control: FANUC 18i-T total power requirement: ca. 155 kW weight of the machine ca.: 291 t dimensions of the machine ca.: 8,6 x 17,6 x 8,3 m - CNC Control Fanuc 18i-T --2-Axis simultanous (X- & Z) - Z-Axe with hydraulic balance - Digital Scale in X and Z Axis - 2 rams on crossrail The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED GHIRINGHELLI GRINDING MACHINE TYPE M12SP610 CNC6A Serial No.: C733.06 Year: 2006 Working wheel Outer diameter of the grinding wheel: 610 mm Equipped with 1 SIEMENS SINUMERIK CN Number of CNC axes: 6 1 Gantry loading and unloading between the grinding wheels 1 Double control wheel carriage driven by 2 Bruschless motors 1 Bruschless motor on the spindle 2 CNC diamond cutters with dimension adjustment Dimensions and weight Machine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-16

turning diameter: 820 mm turning length: 3000 mm control: Siemens 840 D workpiece weight: 2,5 t drive of main spindle: 77 kW spindle nose: A15 spindle bore: 160 mm Workpiece head (C-axis): 0,005 grad max. torque on the working spindle: 2500 Nm main spindle speeds:: 0-2.430 U/min feeds z-axis: 0,1-18.000 mm/min rapid traverse Z-axis: 18 m/min feeds x-axis: 0,1-30.000 mm/min rapid traverse X-axis: 30 m/min steady: 50-350 Spannbereich tailstock - quill dia: 180 mm tailstock - travel of quill: 170 mm y-axis: -100/+150 mm rapid traverse y-axis: 12.000 mm/min b-axis: -105/+95 Grad milling spindle - taper: HSK100 milling spindle motor: 43 kW milling head speed: 1-5.500 U/min max. torque on the milling spindle: 336 Nm tool changer: 96 Plätze weight of tools max.: 15 kg chip conveyor: kW total power requirement: 166 KVA weight of the machine ca.: 40 t dimensions of the machine ca.: 112x4,4x3,85  ...

USED CITIZEN M16V CNC LATHE Year: 2007 Bar diameter: 16 mm Max. turning length: 320 mm Spindle power: 3.7 / 5.5 kW Spindle speed: 10,000 rpm Turret: 20 stations with Y-axis Equipped with 1 Mitsubishi Meldas CN 1 Lubrication pump tray 1 Fire suppression system 1 HP COOL BLASTER CB510 pump unit 1 Chip conveyor 1 IEMCA BOSS 332E/R 44LL bar feeder (4 meter bars) Dimensions and weight Machine: 4000x2000xH1800mm - weight 3500 kg - Bar feeder: 5000x800xH1400mm - weight 800kg + 1 pallet 600x600 weight 200 kg + 1 pallet 1200x1200mm weight 250kg Auction-ID: A1-50950-8

USED OKUMA LCC15 2S CNC LATHE Serial No.: 0311 Year: 12/1998 Main spindle Max diameter above bed: 200 mm Diameter above carriage: 320 mm Max turning diameter: 260 mm Spindle speed: 35-4200 rpm Chuck clamping Ø160mm - 3 jaws Turret 2 Turret / 8 stations Equipped with 1 CN OKUMA OSP 1 Chip conveyor Dimensions and weight 4400x2000xH2400mm - weight 5000 kg Auction-ID: A1-50950-63

USED NAKAMURA SC300L CNC LATHE Serial No.: L301603 Working hours: 4524 hours Main spindle Bar diameter: 71 mm Turning diameter: 350 mm Max turning length: 1100 mm Spindle speed: 6000 rpm C-axis: 360° indexing increment 0.001° Counter-spindle Spindle speed: 6000 rpm C-axis: 360° indexing increment 0.001° Turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X=222 mm - Z=1135 mm - Y=+/- 45 mm Equipped with 1 FANUC 18i-TB CNC 1 HAINBUCH 2701/0011 clamping clamping on the main spindle 1 HFKN 165/46 chuck clamping on the sub-spindle 1 Set of fixed and rotating tool holders 1 Workpiece recuperator 1 Chip conveyor Dimensions and weight Machine: 4650x2200xH2250mm - conveyor: 5300x1500mm - 2 pallets - total weight 5400 kg Auction-ID: A1-50950-56

USED CNC LATHE INDEX 170 M Serial No.: 24932 Spindle bore: 42 mm Max. diameter above the bed: 370 mm Distance between tips: 450 mm Longitudinal stroke of the carriage: 150 mm Stroke of the cross carriage: 400 mm Spindle speed: 4000 rpm Number of positions on the turret: 14 rotating tools Equipped with 1 FANUC series 21i-T CNC clamping on the main spindle1 Set of fixed and rotating tool holders 1 LNS HYDROBAR hydraulic tube Machine dimensions and weight : 3800x2200xH1800mm - weight4500kg - LNS tube: 4800x800xH1300mm - weight 500 kg Auction-ID: A1-50950-33

USED BIGLIA B470 YSM CNC lathe Serial No.: 9957 Year: 2007 Main spindle Bar diameter: 68 mm Max. turning diameter: 200 mm Max. turning length: 300 mm Spindle speed: 100-4000 rpm Spindle bore: 80 mm spindle nose: ASA 6'' C-axis: 360° indexing increment 0.001° Sub-spindle Maximum bar diameter: 42 mm Max turning diameter: 160 mm Max turning length: 200 mm Spindle speed: 100-4000 rpm Spindle bore: 56 mm spindle nose: ASA 5'' C-axis: 360° indexing increment 0.001° Upper turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 165 mm - Y: +60/-40 mm - Z: 380 mm Lower turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 147 mm - Z: 240 mm Equipped with 1 FANUC 18i-T CNC 1 Parts collection belt 1 Tool measuring arm 1 Set of fixed and rotating tool holders 1 Chip conveyor Dimensions and weight Machine:5000x2200xH2000mm - Total weight ...

turning diameter: max. 240 mm turning length: 470 mm control: 840 D sl Operate 4.8 Celos greates pass round over bed: 500 mm swing diameter over slide rest: 290 mm centre distance: 780 mm Main spindle:: turning speed range - main spindle: max. 6.000 min/-1 power capacity - main spindel: 13 / 14 kW max. Torque: 171,5 / 192 Nm inner draw tube diameter: 52 mm C-Axis: 0,001 ° spindle diameter in front bearing: 100 mm spindle nose: FL 140H5 Subspindle:: Spindle speed range subspindle: max. 6.000 min/-1 power capacity - Sub spindle: 12,6 / 16,2 kW max. Torque: 48 / 62 Nm inner draw tube diameter: 37 mm C-Axis: 0,001 ° spindle diameter in front bearing: 90 mm spindle nose: FL 140H5 turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. tool taper: VDI 30 Spindle speed - driven tool stations: max. 5.000 min -1 power capacity - driven tool-stations: 4,18 kW max. T ...

Machining center in vertical design with automatic return Workpiece dimensions: Length: 200 to 3050 mm Width: 50 to 1250 mm Thickness: 8 to 80 mm weight max 60 kg Performance - 2x vertical drilling unit separately controllable with variable speed. right left V10/32mm. 2.3 kW. Drill length 70 mm, D= max 35 mm - 2x horizontal drilling unit, 6 spindles in X direction, variable speed. right left can be controlled separately. Drill length 70 mm, D= max 20 mm - 2x horizontal drilling unit, 2 spindles in Y direction, variable speed. right left can be controlled separately. Drill length 70 mm, D= max 20 mm - Grooving saw unit X-Y can be swiveled 0°/90° saw diameter 125 mm, rpm 1500-7500 frequency controlled - Dowel insertion station for automatic insertion of dowels on the two transverse workpiece edges 1x left side / 1x right side glue pump, vibrating guide for dowels 8 x 35/40 mm - pl ...

4-axis machining center working area: X Y Z : 3060 x 1080 x 155 mm Movement speed X 100 m/min, Y 100 m/min, Z 30 m/min 14 vertical spindles 4 horizontal spindles in X direction 2 horizontal spindles in Y direction Grooving saw 0° - 90° toolchanger 7 positions toolchanger 10 positions Router 7,5 kW, ISO 30 , 1000 - 24000 r/min, c-axis lock milling aggregate available in option

Gantry-type, 3-axis CNC machining centre Working area (type 2132): approx. 3300 x 2100 mm Vacuum table with multiple switchable zones Input: AES lifting table for automatic sheet loading Output: conveyor belt with label printer (labels are printed and applied manually) Main spindle: HSD ES929, HSK-F63 mount, 7.5 kW (9 kW), speed up to 24,000 rpm, 800 Hz, 380 V Main spindle overhauled in 2023 Drilling unit with 16 spindles: 6 vertical spindles in X, 4 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Tool changer with 12 positions Vacuum: Becker vacuum pumps, system approx. 500 m³/h Control: OSAI control system with AES ProcessController, operation via console with touchscreen and keyboard Operating hours: approx. 2,100 h (machine life), main spindle overhauled at approx. 1,360 h

Working area: X 5005 x Y 1520 mm x Z 200 mm Main spindle travel: X 5910 mm, Y 1815 mm, Z 655 mm. Travel speed: X 80 m/min, Y 80 m/min, Z 25 m/min 8 workpiece consoles with automatically positioning vacuum cups Equipment: Drilling unit with 19 spindles, 7 vertical spindles in X, 6 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Milling motor 12 kW, 1000–24,000 rpm, HSK-F 63 mounting, liquid-cooled, 5-axis controlled Tool changer with 22 positions Vacuum pumps with 2 x 100 m³/h capacity PC control Masterwork software Integrated waste conveyor

Bridge type Capacity for all units: 3300 x 1100 mm (alternating: 2 x 1025 x 1100 mm) Capacity for routing with tooldiameter 25 mm: 1550 mm Workpiece thickness up to 300 mm (stroke Z-axis 600 mm) Speed in X and Y: 60 m/min, Z: 25 m/min, Vector: 85 m/min 6 Support rails with LED positioning indication Vacuum: 100/140 m3/h Controlls: Powercontrol PC85 Waste/chip removal belt in machine base Machine pneumatically prepared to take pneumatic clamps, 3 pcs clamps included Drilling unit V9/H4, 13 spindles, motor 2,2 kW Main spindle DRIVE5C+, 5-axis, 10 kW, HSKF63 taper, speed 1000 to 24000 r/min, tooldiameter up to 180 mm for routing, 350 mm for cutting 14-fold rotary toolchanger and pick-up place for a sawblade Woodwop software

Working field: axis x: 3200 mm, axis y: 944 mm, axis z: 110mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill holder: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 24 horizontal spindles in X, 10 vertical spindles in X line Working pressure air pressure: 6 bar Installed power: max 25 kW Capacity of vacuum tools: 40 m³/h CNC: screen: monochromatic 9” Floppy disk unit

Working area: X 5200 x Y 1260 mm Heading of main spindle: X 5709 mm, Y 1650 mm 8 workpiece consoles Equipment: Drilling unit with 18 spindles, 12 vertical spîndles, 6 horizontal spindles (4 in direction X , 2 in direction Y ) Grooving saw Milling motor 11 kW, 20000 rpm max, HSK-F 63 take-up, liquid-cooled, 5-axis controlled Tool changer with 16 positions Laterally positioned changer with 8 positions PC control