128,994 used machines on RESALE, but how to find them? Machine Search
max. format 74 x 104 cm Year of construction 2008 Pallet feeder with suction head Counting device L4 Upstream knife shaft 1st station: 8 fold pockets 74 cm Downstream knife shaft Transfer table for small format 2nd station: 6 fold pockets 74 cm Height adjustable Downstream knife shaft Roller diameter 42 mm / min. seam spacing 45 mm Window rebate bag Shed display Delivery date: short-term Price on request. Worldwide delivery & installation.
Width 52 cm Built in 1990 Flat pile feeder TREMAT 1st station: 4 fold pockets 52 cm Gluing device HHS for cold glue Downstream knife shaft 2nd station: 4 fold pockets 52 cm Downstream knife shaft flexible sword folding unit EF 43 Shed display SAK Delivery date: immediately Price on request. Worldwide delivery & installation.
Type: 230 Maximale buighoek: 180° Max worklength: 2040 mm Max tickness: 1,5 mm Distance between clampblock -- ram: 100 mm Eletric motor (power): 0,75 kW Weight: 1000 kg
- Flat pile feeder - MCC2 Control - 1. Station with 4 buckles - 2. Station with 4 buckles - knife - mobile delvery
Two Heidelberg folding systems are available. 1) Stahlfolder Heidelberg 56 system, year of manufacture: 2006, flat pile feeder: FFH-56, min. sheet dimensions X/Y: 140mm/1800mm, max. sheet dimensions X/Y: 560mm/900mm, paper weight range: 40g-250g/m², max. stack height: 800mm, max. throughput capacity: approx. 200m/min, buckle plate station: BUH-56, working width: 560mm, folding roller diameter: 44mm. 2) Stahlfolder Heidelberg 66 system, year of manufacture: 2006, min. sheet dimensions X/Y: 140mm/180mm, max. sheet dimensions X/Y: 660mm/1040mm, paper weight range: 40g-250g/m², max. stack height: 1200mm, throughput capacity: approx. 200m/min, working width: 660mm, folding roller diameter: 44mm. Documentation available. On-site inspection is possible.
serial number: 70212008 weight: 3,3 t working width: 2040 mm : 4 length: 2900 mm width: 1890 mm height: 1780 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 26028 Technical data: - Max. working width 3040 mm - Max. material thickness ST 37 4 mm - Bending process as fully automatic, or - Semi-automatic workflow can be pre-selected - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Max. lifting height of the upper beam 350 mm - Lifting height of the upper beam can be electronically preselected - Adjustability - bending beam 125 mm - The lower beam 125 mm - Upper bolster drive 400 V / 4.0 kW - Bending beam drive 400 V / 5.5 kW - E. footswitch - Space requirement approx. W 3950 x H 1600 x D 1200 mm - Weight approx. 4800 kg
Folding box cartoning machine Uhlmann C 100 LA • Format range folding box W 30-100, H 15-75, L 70-200 mm • Output 15-100 folding cartons/min • For offset buckle on both sides • Product feed for blister via blister stacking chute • Code reading Laetus Argus for 2x brochure code (front + back), 1x folding box code, 1x brochure presence in folding box • Brochure folding and inserting machine from the GUK FA 21/4 Cartonac 91 magazine • Colour embossing station for folding flap opposite the insertion side, 2 lines, with embossing numbers • Poor ejection with ejection counter-control • Vacuum generators • PLC Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color touch panel - Code Reader Cognex Camera Reader System - Validation documentation - Hot melt machine
C100 LB Cup Chain for Cans, Bottles/Blisters DESCRIPTION: • Format range folding box W 30-100, H 15-90, L 70-200 mm • Output 15-100 folding cartons/min • For offset buckle on both sides • Centrally adjustable cup chain • Product feed for blisters via blister stacking chute (manual packaging) • Monitoring of the height of the packaged goods in the cup chain • Code reading Laetus Argus 4 for 2x brochure code (front + back), 1x folding carton code, 1x brochure presence in folding box via Lumat • Brochure folding and inserting machine from the GUK FA 21/4 Cartonac 91 magazine • Colour embossing station for folding flap opposite the insertion side, 2-line • Poor ejection with ejection counter-control • Vacuum generators • PLC Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color touch panel - Code Rea ...
max. format 36 x 67 cm Year of manufacture 2004 Flat pile feeder Friction feeder 2 fold pockets Delivery date: immediately Price on request. Worldwide Delivery & Installation
1 fold pocket with manually adjustable stops 3 fold pockets with motorized adjustable stops
Folding unit with 3 pockets + blind pocket Flat pile feeder FI-40 mobile shed display Soundproofing enclosure Compressor
A complete gray fabric preparation and further processing line with butt seam sewing machine as well as an automatic double, folding and measuring system from MontiMac Italy is available. 1) Gray preparation line MontiMac model 1090, year of manufacture: 2013, material: cotton, fabric width range: 1800mm/3000mm, seam type: butt seam, material feed: pallets/bales, max. roll diameter: 500mm, sewing unit: TA21-3FY, cleaning brushes: 2. Including inspection table, brush cleaning unit, dedusting and fabric outlet. 2) Super automatic double, folding and measuring machine MontiMac Lafra 200TDD with pallet based design, double triangle usable width, machine usable width: 1600mm, max. fabric package folding height stacking height: 2000mm, max. table load: 1500kg. Including fold counter, control measuring system and length counter. 3) Butt seam sewing machine MontiMac TU03/105 with movable frame. ...
This DR. HOCHSTRATE SBM 3000/6 was manufactured in 2018. It features a PLC control system, operates on 400/50 V/Hz with a power of 7.5 kW, and handles sheet bending up to 6 mm thick and 3000 mm wide. It includes hydraulic clamping and programmable rear stops. Consider the opportunity to buy this DR. HOCHSTRATE SBM 3000/6 Folding Machine. Contact us for more information.
Uhlmann C 130 Bottle Machine / Cup Chain -- max. output 120 FS/min / depending on product Format: L= 70 x 150mm W= 30 x 100mm H= 15 x 85mm Upgrade hardware and software PLC Mitsubishi control and 8 inch color touch panel 10-year spare parts procurement guarantee Product feeder is individually adapted for you mechanically overhauled Accessories optional: - GUK brochure folder 4-fold folding - Barcode reading of the folding box / package insert - Luminizens control, presence control for package inserts in folding cartons - Embossing station - Brochure insertion - Vacuum pump
WITH STAND Ser. No.: 97651504 Format (mm): max. 297 x 420 // min. 105 x 148 Pockets: 2 Folding arts : Letter fold, zigzag fold, double parallel, single fold
Max. bending length: 2540 mm Max. sheet thickness: 5 mm steel Upper beam stroke: 350 mm Manual and automatic mode possible Motorized adjustable back gauge with spring fingers and digital display Central lubrication Segmented upper and lower beam rail for 2050 mm 5600 kg
Key data: 6000 mm, 1 mm
Hydr. Long bending machine with roller shears with 9-fold angle control OP9, manual / automatic Double foot switch for upper beam, start bending beam Bending capacity 6000 x 1.25 mm Year of manufacture 1986, steering 1993 approx. 3000 kg
Heidelberg Stahlfolder KD78.1/4 KTL-PD, Year 2002 Palletfeeder 4 pockets 2 knives Delivery SB-66/MP. D Stream delivery Gate-fold unit Etc. Available: immediately
Max. bending length: 3240 mm Max. sheet thickness: 2 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail and machine in top condition Weight: approx. 3000 kg
Folding line H+H KL 112-45-T10; YOC 2002; good condition; cleaned and tested; Inlet width 350mm; 10 fold pockets; Investor Gremser FN-K-TH year 2007; Preset counter HHC-100. Folding machine H+H KL 112-45-T10; good condition; cleaned and checked; working width 350mm; Ten Pockets; feeder Gremser FN-K-TH year 2007; count unit HHC-100
Key data: 1020 mm, 2 mm
with bending rail 10 and 19 mm, additional segment insert for the upper beam (segment height 60 mm) and Material thickness adjustment, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: green Machine weight: 350 kg Opening width: 150 mm Bending angle (max.): 130 degrees Machine number 16/9
Width 45 cm Year of manufacture 1997 flexible sword folding unit MS 45 Self-control Delivery date: immediately Price on request. Worldwide Delivery & Installation
Key data: 6020 mm, 1 mm
with roller scissors and emergency stop rail Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Sheet thickness max. steel 1.25 mm Sheet thickness max. aluminium 1.5 mm Sheet thickness max. VA 0.7 Projection 1000 mm Color: Green Total power requirement 16 A Dimensions 7000 x 1400 x 1400 mm Weight 3200 kg Upper beam stroke (opening width) 150 mm Bending angle (max) 140 degrees Roller scissors yes Number of stands 5 pieces Insertion depth 1000 mm Machine number 301644
Key data: 3200 mm, 6 mm
Hydraulic swivel bending machine, hydraulic dynamic crowning, touch screen, pressure regulation of the upper beam, mot. Back gauge (1000mm), electr./hydr. Adjustment of the bending beam
Folding machine Eurofold 235 S Art. L1152 The folding machine has been serviced and is in excellent technical condition.
Width 52 cm Year of construction 2002 Flat pile feeder Tremat Sheet Separation System 1st station: 4 fold pockets 52 cm 2nd station: 4 fold pockets 52 cm Shed delivery SAK 52 Delivery date: immediately
2008 HEIDELBERG STAHLFOLDER KH 78/4K-TK KH78+SPH-70+PFH 82 16 pages
Key data: 1020 mm
used, small table bending machine incl. frame, clamping is done via crank, bending beam 10mm, machine in its existing state, without function control, i.e. the machine is not overtaken by us Working length: 1020 mm Sheet thickness steel: 0.7 mm Color/: Green Dimensions: 1400 x 500 x 1200 mm Machine weight: 150 kg Opening width: 85 mm Bending Angle (Max): 105 degrees
Width 52 cm Year of manufacture 1997 Automatic Paper Folding Machine Computer control with monitor Flat pile feeder FSA 52 with suction head 1st station: 4 fold pockets 52 cm Downstream knife shaft Flexible sword folding unit Shed display Delivery date: immediately
Key data: 6000 mm, 2 mm
to sell on behalf of: Hydr. CNC Long Bending Machine OEMB H200.60 Bending capacity 6000 x 2 mm (aluminium 3 m m) With hydr. Adjustable upper beam (adjustment sheet thickness / radius) With hydr. Roller shears with parallel stop with CNC control approx. 6500 kg
- Underfloor suction feeder, - 2 folding pockets, - Counter, - Electric belt delivery, Technical specifications according to manufacturer:, Minimum sheet size: 70 x 120 mm, Maximum sheet size: 320 x 450 mm, Paper stock: 40 - 250 g/sqm, _____________________________________________________, The second folding unit shown (2 folding pockets) is not functional;, it must be expressly overhauled before commissioning!
serial number: 108392 Electric capacity: 7,7 Watt working width: 2050 mm : 4 mm weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PMM, year of construction 2026, 0 operating hours, new; For Sale
Stahl T36/4 miniature small format folding machine, for folding of small size products, such as pharmacy / pharmaceutical leaflets Flat Pile Feeder Folding Type: 4 buckles - 1 knife Format / Size: min. 80 x 100mm - max. 360 x 650mm Paper weight: 40 – 250g/m² Pile height max. 580mm Speed min. 10 m/min. - max. 160m/min. Diameter of folding rollers 32mm Delivery Stream Delivery Kompressor / Compressor include - Manuals Included Available: Immediatelly
Folding Unit – Lang Apparatenbau (Switzerland) For sale is a high-quality folding unit manufactured by Lang Apparatenbau, Switzerland, a company well known for precision mechanical solutions used in the printing, packaging and paper converting industry. The unit is designed for precise and reliable folding operations and can be easily integrated into existing production lines. Technical details Manufacturer: Lang Apparatenbau (Switzerland) Number of fold plates: 4 First fold plate adjustment: up to 450 mm Table extension: up to 600 mm Robust mechanical construction ensures long service life and consistent folding quality. Additional equipment A major advantage of this offer is the large amount of spare parts and additional fold plates included in the package. This allows flexible setup and long-term operation. The machine is in very good technical condition. ...
Width 66 cm Year of manufacture 2004 Pallet feeder Tremat Sheet Separation System 6 fold pockets in the parallel fold section Downstream knife shaft 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Control unit ACC 2.4 Window rebate bag pneumatic Shed Display SAK 66 Delivery date: immediately from stock
max. format 78 x 120 cm Year of construction 2012 Fully Automatic Paper Folding Machine Computer control with touch screen Navigator Control Pallet feeder with Vaculift and Vacubelt 4 fold pockets in the parallel fold section Automatic folding pocket adjustment Automatic folding roller adjustment Knife shaft cassette 2 folding swords in the crossfold section Automatic folding blade adjustment 1 more fold pocket after the 1st cross break Palamides alpha 500 Stacking Delivery Delivery date: immediately from stock
Width 66 cm Built in 1999 Pallet feeder with suction head Tremat Sheet Separation System 1st station: 6 fold pockets 66 cm Upstream knife shaft Downstream knife shaft Gluing device HHS for cold glue 2nd station: 6 fold pockets Upstream knife shaft Downstream knife shaft 3rd station: 4 fold pockets Downstream knife shaft Standing sheet delivery SBP 46 Delivery date: immediately
Used cartoning machine with sealing device made by Italian company SIAT, model F144 DX. New: 2006.
2002 Fold length: max. 36 cm; min. 5 cm Paper weight: 40 - 250 g/m² Power supply: 230 V / 10 A Underfloor vacuum feeder PBA with integrated alignment table 2 pockets Total counter Control panel Double sheet control Size: max. 35 x 45 cm min. 8.5 x 12 cm In production Located: Germany Available: immediately
Max. bending length: 1020 mm Max. sheet thickness: 1.5 mm steel Weight: approx. 300 kg
Folding machine Type: K 54/4 KTL-F4 Manufacturer: GUK Year: 2004 Max. paper format: 540 x 800 mm Min. paper format: 150 x 190 mm Cross fold: 150 x 190 mm Triple fold: 210 x 300 mm Min.fold length: 45 mm Paper weight 40 – 300 g/m² Speed 30 – 180 m/min. Output: 40,000 pcs / hour (depends on paper format and quality) Stack feeder: yes Suction paper feeding: yes Unloader: yes Power supply: 400 V Mains frequency 50 Hz / 60 Hz Total weight of the device: 1600 kg The device is in excellent technical condition. New folding rollers and transport belts. Find more here - / Contact us at -
Reference Num.: 4429 Brand: Heidelberg Type: Stahlfolder Ti 52-4 Construction year: 2006 Available: 15.05.2026 Status: In production Location: Deutschland Equipment: - Schuppenanleger - 4 Falztaschen
- flat pile feeder - 1 Station with 4 buckles - KB 49.2 with 1 knife - standard delivery
maximum number of results exceeded
please refine your search
