cnc floor boring used for sale

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain TNC 310 tool taper: SK 40 speeds: 20-4500 U/min weight of the machine ca.: 3 t dimensions of the machine ca.: 2,15 x 2,00 x 2,50 m Equipment/accessories: -swivel rotary table -documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

D'Andrea TA120 Plan Boring Head SK40 S20x2 Cover Fp1 Fp2 Boring Tool Total weight 16.6 kg Lots of accessories, see pictures. Very good used condition. In original wooden crate

Magnetic swivel table as shown in the pictures. Further information on request

SKODA WD160B floor type boring mill X Axis 3150 mm Y Axis 2500 mm Z Axis 1600 mm Table 2000x2000 mm Piece weight 20000 kg Spindle diameter 160 mm Max. spindle speed 800 rpm Spindle motor power 75 kW Length x width x height 10000.0 × 5250.0 × 6365.0 Weight 50000 kg New control.

Inv. Num. : 8262 Type: PR 99-20 Producer: Cobalm Created: 2011 Parameters: Axis X: 3400 mm Axis Y: 1900 mm Axis Z: 280 mm Cutting thickness: 200 mm

Manufacturer: Pankoke und Kochsiek, Type: BFA-03, Control: hand, Program-controlled: no, Min.-max. workpiece length in mm: 22,5, Min.-max. workpiece height in mm: 0,75, Program: 40, Drilling beam swivel-mounted: no, Lochraster: yes, Drilling engine kW: yes, Working range max mm: yes, Drilling support horizontal: 2, Dovel insertion: inkl. Magazinaufstapel Magazin und Hauptsäge und Nutsäge,

Manufacturer: Weeke, Type: BST 50, Year: 1992, Program-controlled: yes, Work piece width min-max mm: 100-1050, Min.-max. workpiece length in mm: 350-2600, Min.-max. workpiece height in mm: 10-60, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 60, Drilling support horizontal: 2, Drilling supprt from bottom: 6, Drill support from top: keine, FREE TEXT: inkl Bohrhetriebe, Year :1992

Manufacturer: Rapid, Type: Astglochbohrmaschine, Number of drilling spindles: 3 Spindeln Schnellkwechsel, Aperture/throat mm: 600, Units - total: 1, Main engine kW: 0,75, Drill feed - pneumatically: hand, Milling spindles vertical: 80 mm,

Manufacturer: Koch , Type: BLG, Year: 1992, Control: hand, Program-controlled: yes, Software: 300, Work piece width min-max mm: 200-2500, Min.-max. workpiece length in mm: 10-60, Program: yes, Lochraster: alle 2, Drilling engine kW: 60/80, Working range max mm: 2 von hinten, Drilling supprt from bottom: 2, Drill supports from behind: 7, Work piece refeeding: yes, Taktleitung min: 1, Dovel insertion: yes, Overhauled on: alle Bohrgetriebe drehbar 360 Grad, Year :1992

Manufacturer: Scheer , Type: DB 3000, Control: Fusspedal, Drilling beam swivel-mounted: yes, Number of drill spindles: 4, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 80, Beleimwerkzeuge: no, Dovel insertion: no, Work piece clamping: Pneumatisch, Pneumatic clamping: yes, Work piece support: yes, Work stations: 2, Foot switch: yes, Axis control for: no, Drilling hight: 60, Wight approx. kg: 1000, Abeitsbreite 3000 mm,

Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Weight: 3 T

TOS ,W 100 , YEAR 1976, SPINDEL MORSEA

Year of manufacture: 1992 / G: 2025 Spindle diameter ... 100mm Axis X ... 1500mm Axis Y ... 1250mm Spindle speed ... 7-1120 rpm Axis W Axis Z ... 1800mm ISO 50 Turntable diameter ... 1200x1200mm The machine is in good condition, possible to test under power.

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 800 mm   Y-axis travel: 600 mm   Z-axis travel: 800 mm   W-axis travel: 1250 mm   rotating range B-axis from: 0 °   rotating range B-axis up to: 360 ° WORKING RANGE -BORING-   drilling depth (max): 800 mm   drilling capacity full bore (steel): 25 mm SPINDLE / HEAD   tool fixture: HSK A50   drive power: 15 kW AXIS DRIVES   feed velocity (max): 15000 mm/min TOOL MAGAZINE   number of positions: 20 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 5600 mm   space requirements -front/back-: 4910 mm   total height: 2700 mm   total weight approx.: 10800 kg 20 toolstations with rotating table 800x600 approx 46300h Including chip conveyor and vari ...

Key data: 4 , 14 mm

Multiple drill head from Romai, Sigloch & Schrieder up to diameter 14 mm in steel 4 stations, automatic and manual switching 2 speed ratios choiceable (direct and reduced) incl. adapter MK 4 and flange

x-travel: 1600 mm : ja weight of the machine ca.: 13,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...

table length: 2000 mm table width: 1800 mm table load: 12,5 t total power requirement: 10 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features Telescopic covers for the guides. Infinitely variable table feed. Optical display for setting and reading the longitudinal adjustment. Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power ...

workpiece diameter: 125 mm grinding depth: 50 mm clamping length: 2000 mm total power requirement: 0,5 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _______________________________________________________ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm Max.weight of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head ...

Radial drilling machine WEBO type R4bRFabr. No. 15 / E195 Year of construction approx. 1965Drilling capacity 40 mmThroat: approx. 1250 mmSpindle holder: MK 4Spindle speed: 30 - 1325 rpm. 9 stepsFeed from 0.12 - 2 mm/rev. 9 steps; used

Universal face and boring head LENZ type LPA 1SSpindle tool, spindle head similar to WOHLHAUPTER UPA3Tool holder: SK 40 - M16Adjustment accuracy: 0.01 mm- Accessories as shown- Storage boxWeight: approx. 5 kggood condition; used

Manufacturer: WMG Model: BMT 105 PTP Year of Manufacture: 2003 Type of Machine : Horizontal Boring Machine Voltage: 400V Frequency: 50Hz Current Rating: 63A Protection Class: IP43 Control Voltage (Uc): 24V DC Machine Specifications: - Control: CNC Heidenhain TNC 124 - Table Size: 1750 mm x 2000 mm - Spindle Diameter: 105 mm - Travel (X/Y/Z/W): - X: 2500 mm - Y: 1850 mm - Z: 1400 mm - W: 700 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 410 mm y-travel: 310 mm z-travel: 400 mm table-size: 700 x 280 mm control: Heidenhain TNC 145 tool adaptor: SK40 turning speed range: 40- 2.000 U/min rapid speed: 1,5 m/min feed speeds: 1500 mm/min power requirement: 2.2 kW quill stroke: 63 mm weight: 1,3 t total power requirement: 2,2 kW weight of the machine ca.: 1,5 t dimensions: 1,4 x 2,1 x 2,0 m Features: - New TFT screen - Coolant system - Hydraulic tool clamping - Milling head with spindle sleeve - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPINDEL 115 , ISO 50 , X,Y,Z - 2000 DRO TABLE 1400 X 1600

Universal tool milling machine DECKEL FP 3 With 3 axes active digital display Heidenhain TNC 11 Year of Make: 1984 Travel: X 500 Y 300 Z 400 Speed range: 25 – 2500 rpm With the following accessories: Rigid angle table 850 mm x 400 mm clamping surface Swivel rotary table 0 450 mm with dividing discs Bumper Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer Various milling mandrels SK 40 / S22 x 2 Chip tray Automatic lubrication pump for X,Y,Z axis Machine Light Coolant Setup 4 pcs machine shoes Operating instructions

Sr. No.: 802245

Key data: 150 mm, 13500 mm, 3500 mm

Floor Type Horizontal Milling and Boring Machine Model : BF-150B with Fanuc series 311 — Model A CNC Controller in perfect working condition to be inspected in power YOM 2012 CNC Fanuc 31i Inspection Under power X - cross 13,500 mm Y - vertical . 3,500 mm W - boring ... 1,000 mm Z - quill ... 450 mm Spindle Taper ... No 50 Spindle Motor ... 26/ 22 kW 2 Angle Heads ATC 60 2 Rotary Tables 2m x 3m

Dimensions (L/W/H): 3500x2300x1780 mm Weight: 4000 kg Total power requirement: 27,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x1100x1350 mm Weight: 500 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1050x1050x110 mm Weight: 350 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2800x1100x2200 mm Weight: 1100 kg Total power requirement: 8,8 kw Horizontal and vertical drilling machine MULTI MZ3x8 - Max. Center Distance Between Holes 2440(L)mm x 300(W) mm- Min. Center Distance Between Holes 220(L)mm x 32(W) mm - Max.process length 2440 mm - Min.process length 220 mm - Plate thickness 12~40 mm - Total number of drilling bit 32pcs - Horizontal backside drilling rows 4 rows - Max. drilling dia. 35 mm(Single bit) and 13 mm (Multi)- Max. drilling depth 50 mm - Dia. of drilling bit shaft 10 mm - Length of drilling bit 57 mm/70 mm - Drilling bit speed 2840 rpm - Qty of horizontal L&R drilling rows 2 rows - Qty of vertical up drilling rows 2 rows - Air pressure 0.5~0.6 Mpa - Total power 8.8 kw - Net weight 1100 kg - Overall dimension 2800 x 1100 x 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1320x1220x1400 mm Weight: 275 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mm y-travel: 250 mm z-travel: 400 mm table-size: 1200 x 300 mm control: konventionell tool adaptor: SK40 turning speed range: 50 - 2500 U/min quill stroke: mm total power requirement: 2,2 kW weight of the machine ca.: 1,7 t dimensions: 2,1 x 2,0 x 1,6 m Features: - Digital display - Coolant system - Huron milling head - Emergency stop device - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 110 mm

HBM HWCa-110, new in 1965

HBM type Knuth BO110,Table size: 1100 mm x 960 mm with tail stock and face chuck

Automatic multiple drilling machine for chair seats CAMAM mod. FMV/4U with 4 drilling units - N. 4 independent drilling units - Control panel - Year 1996 - CE compliant

This KNUTH BO 110 was manufactured in 2013. A robust boring machine, it features a maximum workpiece diameter of 250 mm and a grinding length of up to 500 mm. The grinding wheel operates at 1670 RPM, with a headstock speed variable from 50 to 500 RPM. It supports a table swivel range of ±9° and a table speed up to 4 m/min. Ideal for precision boring, the KNUTH BO 110 machine we have for sale. Contact us for further details.

This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1600 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information.

This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information.

Pensulum holder for ER25 collets

Manufacturer ZAYER Model 30 KMU-5000 Year 1999 CNC HEIDENHAIN TNC-430PA Table surface 4,700 x 1,200 mm. Strokes (X/Y/Z) 3,400/1,250/2,000 mm. Shaft Outlet (W Axis) 500 mm. ISO-50 Head Cone Main Motor Power 37 kW 45º Automatic Head INCLUDED Head Rotation 45º Automatic Rotation 0.001º/0.001º Head revolutions 45º 3,000 rpm 45º ISO-50 Head Cone Continuous Twist Head INCLUDED Twist head revolutions 3,000 rpm Twist Head Cone ISO-50 Ram with cane INCLUDED Shank diameter 150 mm. ISO-50 Rod Cone Internal and external cooling head 45º and rod INCLUDED External cooling twist head INCLUDED Semi-automatic head pickup INCLUDED Automatic Loading Tools INCLUDED Loader Positions Htas 60 AITEK Pickup Station for 45º head storage and Twist Head INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel RENISHAW MP 16+SP2/1 Piece Measurement Probe Motors + ...

Boring mill Union BFP 130/6 BJ 1982

Boring spindle diameter: 130mm, tool holder: SK50, centering: 500mm, travel X/Y/Z: 250mm/160mm/380mm, travel W/U: 1000mm/320mm, feed rate: 2m/min, rapid traverse: 5m/min, max. diameter drilling/facing: 800mm/1400mm, torque boring spindle/facing support: 3100Nm/6150Nm, clamping plate dimensions X/Y/Z: 3500mm/1750mm/350mm, weight: approx. 30000kg, controls: Bosch. Including angle head, extension piece, steep taper tool holder for SK50 (without tools), 4x plate fields with the dimensions 1080mm/2000mm and boring apparatus. Documentation available. An inspection on site is possible.

x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 600 x 210 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 830 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine is in very good condition and comes from a training workshop. Equipment: 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage Fixed angle table Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm Coolant equipment Central lubrication Tailstock with counter bearing Manual The data for this ad was created with ModulMWS - the software solution o ...

Universal tool milling machine DECKEL FP 4 MK with 3 axes active digital display Heidenhain TNC 113 Year of Make: 1990 Travel: X 500 Y 400 Z 400 Speed range: 50 – 2500 rpm With the following accessories: Rigid angle table 800 mm x 460 mm clamping surface Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer Hydraulic tool clamping Hydraulic vise GRESSEL 125 mm Various SK 40 milling mandrels Splash guard cabin Automatic lubrication pump for X,Y,Z axis Machine Light Coolant Setup 4 pcs machine shoes Operating instructions

Milling chuck, boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, face head, facing and boring heads -Manufacturer: Komet microbore twinbore, milling heads, facing and boring heads with countersinking tool -Type: various designs, see photos -Comet: Type AB/VD 80 / AB/V 63x85 / AB/FZ 63 / AB/FZ 40 / AB/FZ 25 / FZ 32-100-3 / 2x AB/ISO 40x63x50 -Comet: Type AB/VD 63 / AB/VD 40 / AB/FZ 80 / AB/V 40x60 / AB/VD 50 / AB/V 25x60 / AB/VD 25 ... -twinbore: microbore MTP-75-1 / MTP-75-80 ... -Price/Fee: complete -Dimensions of transport case: 715/365/H210 mm -Total weight: 72 kg

Milling holder, boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, boring tool, facing head, facing and boring heads -Manufacturer: ER MEX CH, milling holders face and boring head MK4 -Type: D-210 -Dimensions: Ø 96 x 385 mm -Weight: 8.3 kg