cnc floor boring used for sale

I offer those interested a used rotary table from the HP100 horizontal boring machine. The size of the table is 2200x2200 mm, weight 14,000 kg, rotation on a ruler + optically adjustable by 90°, linear measurement in the direction of table movement. Load capacity over 4,000 kg. Motor/manually controlled feed and rotation. Sliding guide in condition according to the photo. Fully functional. We are replacing it with a table with a rotary sensor. Available immediately. (it will be connected until 12/10/2022 and can be demonstrated)

Main axis diameter 90 mm Walrus Cone nº 5 (ISO 40) Longitudinal Column Travel 800 mm Vertical Movement 1.000 mm Automatic cross travel 1,000 mm Automatic longitudinal movement with lunette 1,000 mm 1.350 mm longitudinal automatic movement without lunette Bench width 900 mm Number of rotation speeds 18 Rotation speeds 10-1.000 rpm Table surface ` 1.000 x 1.200 mm Maximum weight allowed on the table is 4,000 kg Table rotation with 90º block function 360º Approximate weight 10 Tons Main engine power 15 HP Feather diameter 520 mm Plate travel 170 mm Speed Ranges 14 Maximum and minimum rotation speeds 10-335 rpm

The 1550 vertical lathe is a heavy vertical lathe that can be used to turn large parts. The machine was supplied to enterprises of the heavy, energy and nuclear industries, enterprises of the oil and gas industry, and was also exported. The 1550 lathe has proven itself to be reliable and unpretentious, not requiring special attention. The largest diameter of the installed product - 5000mm The greatest height of the installed product - 3200mm Faceplate diameter 5000mm The maximum weight of the processed product is 50t. H=8315mm H=12900mm L=7500mm Carousel machine model KU-281 Electric motors П112N125kw n=330-1000-2200rpm PNF45 N=6.5 kW; n=14-2800rpm AOS2-51-4 N=8.7 kW n=1335 rpm AOS2-61-4 N=14.5 kW n=1350 rpm AO2-31-4 N=2.2 kW n=14200 rpm AOS2-21-4 N=13kW n=1300 rpm AO2-22-2 N=2.2 kW n=2850 rpm AO62-4 N=10kw n=1400 rpm And also Angle head for machine KU-281 for dr ...

Machine double-sided row drilling machine 2 drill motors 1.8 kW with oil brake cylinder Stroke max. 130 mm with pneumatic reversing valve 21 spindles, spindle pitch 32 mm Drilling distance max. 640 mm (by moving the Bkhqffww workpiece max. 2656 mm) Portal passage 850 mm Air verbatcu at 5 atm approx. 11 l per cycle Suction nozzle 160 mm Machine dimensions approx. 3100 x 1100 x 1800 mm Weight: approx. 350 kg Availability: short-term Location: 97478 Hainert

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2050 mm z-travel: 1050 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 850 mm main drive motor: 45 kW table surface area: 1600x2000 mm Control: Heidenhain type: TNC 426 workpiece weight: 12500 kg : 720 mm radial face slide travel: 240 mm : total power requirement: 90 kW weight of the machine ca.: 31,1 t dimensions of the machine ca.: 6,5x5x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gebr. Knothole drilling machine RAPID 3 spindles 0.8 kW 380V (16A plug) wall-mounted Swivel Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

TOS W 75

BFT 90/3 SPINDEL 102 , ISO

Shipping within Germany 8 ,- insured

Key data: 130 , 3500 , 2000

CNC SIEMENS 840D X-axis (longitudinal) 3500 mm Y-axis (transverse) 2000 mm Z-axis (vertical) 1250 mm Table length 1800 mm Table width 1800 mm Maximum workpiece weight 12000 kg Spindle diameter 130 mm Maximum spindle speed 800 rpm Magazzino utensili 52 posti Spindle motor 37 kW Year of revision 2005 ------------------- Length x width x height 7200 × 7800 × 4900mm Weight 32000 kg

Key data: 1080 mm, 710 mm, 710 mm

With MILL PLUS iT path control Year of construction: 2005 Travels: X 1080 Y 710 Z 710 Speed range: 0 – 12,000 rpm Infinitely variable (SK 40) With the following accessories: Rigid angle table 1500mm x 800 mm clamping surface NC – Rotary table integrated in rigid table 0 800 mm Controlled swivel milling head (B axis) 3 D touch probe Vertical tool changer with 32 magazine positions (SK 40) IKZ 40 bar Rotoclear Mode 3 + 4 Full protection cabin with sliding doors and interior lighting Electronic handwheel Coolant device, Chip sweeping gun Conveyor Oil mist extraction Integrated screw conveyor , step grate , transport device 3 Height-Adjustable Machine Shoes Operating instructions

Key data: 750 mm, 600 mm, 520 mm

CNC universal milling machine DECKEL MAHO DMU 70 NEW DMG Design With track control Heidenhain iTNC 530 Year of construction: 2013 Travel : X 750 Y 600 Z 520 Speed range : 20 – 14,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Swivel rotary table for 5-axis simultaneous machining Ø 800 mm x 620 mm Electronic handwheel 3 D Probe Heidenhain Mode 3 + 4 Vertical tool changer with 30 magazine positions ( HSK 63 ) Sealing Air for Linear Measuring System Conveyor IKZ 40 bar Rotoclear Chip Sweeping Gun 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE HAS ONLY 3218 PROGRAM RUNNING HOURS THE MACHINE IS IN VERY GOOD MINT CONDITION

CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 60 T With MILL PLUS iT path control Year of construction: 2002 Travels: X 630 Y 560 Z 560 Speed range: 0 – 12,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1000 mm x 600 mm clamping surface 3 D touch probe Electronic handwheel Mode 3 + 4 Vertical tool changer with 24 magazine positions (HSK 63) Full protection cabin with sliding doors and interior lighting IKZ 40 bar Integrated screw conveyor Rotoclear Chip rinsing gun Coolant system 3-Piece Height-Adjustable Machine Shoes Spindle Oil Cooler Transport device Operating instructions

Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 124 Year of construction: 2001 Travels: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic Handwheel for X, Y, Z Axis Splash protection booth Machine light 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

CNC universal tool milling machine MAHO MH 500 W 4 With path control Philips CNC 432 Year of construction: 1990 Travel: X 500 Y 380 Z 350 Speed range: 20 – 5000 rpm infinitely variable With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Splash protection booth Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital display Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 – 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

X axis travel 12.000mm Max height under head 1.800mm Y axis travel 3.200mm Z axis travel 1.000mm W axis travel 2.100mm Table dimensions 12.000 X 3.000mm Max weight on table 60 ton Spindle power 47 Kw Max spindle speed 4.000 Rpm CNC SIEMENS 840 D Head changer with nr.04 heads ATC 60 utensili Rebuilt year 2008

YOM 2009 X axis travel 28.000mm Y axis travel 6.500mm W axis travel 2.000mm Z axis travel 1.500mm Table dimensions 25.000X5.000mm Automatic head changer with Nr. 03 heads Nr.10 planos 5.000X2.500X300mm CNC SIEMENS 840 D nr.03 axes automatic head in continuos, spindle speed max 4.000rpm,56 Kw, HSK A 100 Vertical head max spindle speed 3.000rpm,56 Kw, HSK A 100 Angular head max spindle speed 3.000rpm,56 Kw, HSK A 100 High pressure refrigeration trough spindle (50 bar) ATC 120 positions

Triade Turned Drilling Machine Number of spindles: 3 Spindle system: Rights 3kw Left 3kw Side 0.75kw Pneumatic control Pneumatic Component Clamp

W160HC with ISO 50 y.m. 1987 xtravel 4000mm y travel 3150mm rotary table S35C load 35tons, 3150 x 2800mm milling heads, tools

Table capacity 80 TONS Clamping plate width mm 3550 length mm 4000 Carriage travel V mm 2000 Heidenhain scale Rotary axe B ROD 700 Table height mm 1460 Table weight kg 52000

Inv. Num. : 7248 Type: BKoE 400x630 Producer: VEB Mikromat Generated:- Parameters: Work table length: 630 mm Work table width: 400 mm Machine weight: 2300 kg

Specifications: Tool holder: MK 4 Drilling capacity: 40 mm Speed range: 56 - 1250 1/min Spindle stroke: 240 mm Feeds: 0.06 - 0.84 mm/rev Table size: 1040 x 380 mm Projection: 360 mm Column diameter: 240 mm Motor power: 6.5 kW Connection: 400 V Weight, approx.: 2300 kg Dimensions (WxDxH), approx.: 1260 x 1806 x 2820 mm Equipment: - Feed device - Drilling depth stop - Coolant foot - Emergency stop push button

Travel X-axis 1200 mm Travel Y-axis 1600 mm Travel Z-axis 2000 mm Table length: 1245 mm Table width: 1115 mm Morse 6

Condition: Very good condition

TOS W100 Horizontal Boring Mill DRO Spindle 100 mm Spindle speeds 7.1-1120 rpm X/Y/Z/W Axis- 1600/1120/1250/900 mm Table size 1250x1250 mm Max table load 3 ton Table type rotary Facing chuck diameter 600 mm Slide travel 210 mm Max facing diameter 900 mm Facing chuck speed range 7.1 - 224 rpm Total power 15 kW Dimension 6020x3000x3500 Weight 14000 kg Remarks: faceplate is available, under a fixture

Key data: 500 mm, 400 mm, 400 mm

CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 50 T With track control Siemens Year of construction: 2002 Travels: X 500 Y 400 Z 400 Speed range: 20 – 9,000 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Vertical tool changer with 16 magazine slots Mode 3 + 4 Full protection cabin with interior lighting 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE IS IN GOOD CONDITION THE MACHINE COMES FROM A TRAINING WORKSHOP

spindle diameter: 200 mm x-travel: 11.000 mm y-travel: 4.000 mm z-travel: 1.600 mm w-Weg: 400 mm dimension of the ram: 520 x 520 mm tool taper: ISO 60 turning speed range: 0,8 - 800 U/min torque: 35.000 Nm bore feed range: 0,75 - 3000 mm/min milling feed range: 0,75 - 6000 mm/min : 3.000 mm/min rapid travel: 6.000 mm/min electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 180 kW weight of the machine ca.: 181 t dimensions of the machine ca.: ca. 16 x 6 x 9,3 m rotary table: SKODA E 25 SKODA boring table E 25 clamping area 2.000 x 2.000 mm long. movement V-axis 1.200 mm DRO Heidenhain Positip floor plates consisting of 6 platesa 5500 x 1850 x 350 mm (61,05 m²) 2 angular milling heads The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping width: 2000 mm clamping length: 2000 mm workpiece weight: 25000 kg bed length: 3000 mm table height: 890 mm table width: 2766 mm x-travel: 1200 mm electrics - voltage/frequency: 380/50 V/Hz dimensions of the machine ca.: 3x2x1 m weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Strokes: x 5500 z 2400 y 1100. Machine retrofitted in 2019 ECS 901 Predisposition for networking. New spindle drive. Overhauled recirculation screws. 2000x1000 cubes n ° 2. Machine in operation.

Table mm. 1250 x 920 Spindle diameter mm. 80 Tool holder ISO 40 Travel X mm. 1430 Travel Y mm. 985 Stroke Z mm. 850 Spindle speed 1500 rpm Quill stroke mm. 530 ECS CNC accessories

Sale of a second-hand horizontal boring machine UNION model BFT-80/2, year of manufacture 2003: axis travel: 1000 x 1000 x 1600 mm - spindle diameter: 80 mm -cone: ISO 40 - max. diameter of boring faceplate: 800 mm - diameter of the hole to be machined without faceplate: 450 mm - spindle extension: 500 mm - faceplate diameter: 500 mm - turntable height: 915 mm - size of the table clamping surface: 1120 x 1000 mm - table load: 2500 kg Delivery time - ready for shipment

Machine available visible in working order Table Size: X:2500mm Y:700mm Z:700mm X Axis Runs: 2500 Y Axis Strokes: 700 Z Axis Strokes: 700 Maximum Spindle Rotation Speed: 3,000 rpm Head Indexing: 2.5º Spindle power kW: 22 Government Unit: Selca 3045 Spindle connection: DIN 69871

Travel X-axis 1200 mm Travel Y-axis 1600 mm Travel Z-axis 2000 mm Table length: 1245 mm Table width: 1115 mm Main shaft cone: Morse 6 Spindle travel - W axis 680 mm Year of manufacture: 1960 Tool with accessories: 45° milling cutter, small turning head, cartridge holder, 8 different knife holders, table can be rotated. With additional water cooling. Drilling from the spindle is perfect, feeds work, stable machine!

HBM W 160 H, CNC Heidenhain iTNC 530, new 1982, after repairs 2009, spindle taper Morse 100, are reductions from M 100/HSK80

HBM WI 130 CNC Heidenhain iTNC 530, new 1969, after repairs 2008, spindle taper M 80/HSK 80

Rotary table size: 2000x2000 mm Max. load on table: 20 tons Spindle diameter: 160 mm Inner cone of spindle: 100 metrical Max. spindle torque: 250000 kgcm Bed height: 550 mm Width of bed guides: 2000 mm Max. drilling depth with boring spindle: 1600 mm Max. move-out of quill: 1250 mm Normal travel of spindle headstock on the column: 2500 mm X-axis: 3000 mm Min. height of spindle axis over bed surface: 1400 mm Range of steplessly adjustable spindle speeds: 2-800 rpm Range of steplessly adjustable drilling feeds (spindle and quill): 0,5-1600 mm/min Range of steplessly adjustable milling feeds (spindle headstock and column): 1-3200 mm/min Speed of rapid travel at drilling (spindle, quill): 1600 mm/min Speed of rapid travel at milling (spindle headstock in vertical direction, column): 3200 mm/min Power of adjustable electric motor of direct current of spindle drive: 6-55 kW R ...

Main technical characteristics: Processing control digital indication; Spindle diameter mm, 200; Cone mm, 60; Quill size mm, 5205200; Maximum spindle torque: Cutter diameter 160mm. – 8600 Kn. Maximum depth of boring by spindle in mm., 2000; The maximum extension depth of the quill in mm., 1600; Movement of the headstock on the rack in mm., 3000/4000; Moving the rack along the frame in mm., 4000/20000; Dimensions and weight: -Height of a bed in mm., 500; Width of bed guides in mm., 2000; Width of rack guides in mm., 1700; Total machine power 180kVA Power of the main drive in kW, 77. The machine is equipped with a rotary table weighing 49000 kg. Machine weight 102000 kg. We are ready to discuss the price and all terms, please contact us for further discussion.

Capacities: Main Table: 560 x 405mm Top Table: 455 x 455mm Long Traverse: 610mm Cross Traverse: 320mm Vertical Traverse: 285mm Spindle Speeds: 50 – 2000rpm Infinately Variable Spindle Taper: 40 Int Feeds: 4- 106mm per min Infinetley Variable   Electrics: 415v, 3ph, 50 cycles Motor: 3HP   Complete with: Coolant   DRO can be added at extra cost   Approximate Dimensions: 3200 x 1200 x 2100mm Approximate Weight: 1750kg

Saw-Drill Manufacturer: Pade Model: EV 25 Built in 1995 Sawing unit Drill gear with 5 spindles

Kunzmann Universal Milling and Drilling Machine WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...

Description: The machine is in good technical condition. Working spindle diameter: 110mm Table clamping surface: 1250 x 1250mm Machine dimensions lxwxh, 5290x4063 mm. Machine weight, 27000 kg By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Table working area: 950 x 950 mm Maximum table load: 3000 kg Maximum tool speed: 1800 rpm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Spindle extension W: 560 mm Po by prior arrangement, the possibility of a tour in progress.

Location: Czech Republic Description: Working spindle diameter 100 mm X-axis travel 1250 mm Travel of the Y axis 1100 mm Spindle speed 10 - 1200 /min. Central cooling does not Spindle extension (W) 630 mm Z axis travel 970 mm The toolbox does not Spindle clamping cone ISO 50. Power of the main electric motor 22 kW Table clamping surface 1000 x 1120 mm Max. workpiece weight 3000 kg Dimensions L x W x H 4746 x 3000 x 3340 mm Machine weight 13700 kg

Working spindle diameter: 75mm Table clamping surface: 950x950mm Digital measuring X-axis travel 1,250 mm Y-axis travel 900 mm Z-axis travel 1,060 mm Spindle speed 18 - 1800 /min. Spindle extension (W) 560 mm Power of the main electric motor 11 kW Max. table load 3,000 kg Dimensions LxWxH 4500 x 3400 x2800 mm Machine weight 10t Inspection possible upon agreement. Accessories: support column

The machine is in good technical condition. Table working area: 950 x 950 mm Maximum table load: 3000 kg Maximum tool speed: 1800 rpm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Spindle extension W: 560 mm Po by prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition, control system HEIDENHAIN 310. With circular interpolation. A tour is possible upon agreement. Basic parameters 100 mm; 1000 x 1120 mm Machine weight: 13400 kg Total power of the machine:: 20 kW Diameter of the working spindle: 100 mm Spindle taper: ISO 50 Spindle speed: 4 - 1400 rpm Table clamping surface: 1000 x 1120 mm

Type: H 100A Parameters: 100 mm, 1250 mm Manufacturer: Tos Year of production / SO / GO: 1970 / - / 2004 Description: Machine in good technical condition. Possibility of testing after agreement. Working Spindle Diameter 100 Mm Iso 50 Spindle Taper Table Clamping Area 1250 X 1250 Mm Max. Workpiece weight 3000 Kg Longitudinal Table Movement - X Axis 1250 Mm Transverse Table Movement - Z Axis 1250 Mm Vertical Table Movement - Y Axis 1120 Mm

The WHN 13.8B CNC boring machine is in good technical condition, HEIDENHAIN control system. The year of GO 2001 Total machine input:: 37 kW Working spindle diameter: 130 mm Spindle taper: ISO 50 Spindle speed: 2500 rpm Clamping surface of the table: 1800x2200 mm Transverse movement of the table - x-axis: 3500 mm Longitudinal movement of the table - z axis: 1200 mm Vertical table movement - y axis: 2500 mm

Year of Manufacture/SO/GO: 1987/-/2001 Description: The machine is in very good technical condition, dismantled, stored in storage. 5 persons X (table lift) 5000 mm Y (vertical lift of headstock) 2000 mm Z (longitudinal displacement of the column) 1250 mm W (spindle travel) 800 mm Engine power: 37 kW Spindle speed range: 1.25-900 rpm Rapid feed: 4000 mm/min Spindle diameter: 130 mm Table: 1800 x 1800 mm Machine weight: 12000 kg Spindle taper: ISO 50. control system HEIDENHAIN