cnc engraver used for sale

X-axis travel: 810mm, Y-axis travel: 610mm, Z-axis travel: 610mm, rapid traverse: 30m/min, tool holder: SK40/DIN 69871A, pull stud: DIN 69872A, tool changer: 32 tools, program memory expansion: 64MB (ATA memory card), machine color: RAL 7035/5008, mains voltage: 400V, mains connection: 3/PE~ (three-phase AC with protective earth), mains frequency: 50/60Hz, operating current (I_B): 50A, rated current (I_N): 50A, programming interface: Siemens ShopMill, max. spindle speed: 8,000rpm, screen: 10.4-inch color display, control system: Siemens 810DE PowerLine, operating hours: 37,506h, including documentation. On-site inspection is possible.

X-axis travel: 360mm, Z-axis travel: 980/1580mm, rapid traverse X/Z: 15/24m/min, max. turning diameter: approx. 500mm, max. swing diameter: 800mm, spindle nose: A11, bar capacity: 110mm, power (100%/40%): 22/33kW, torque gear stage 1: 175/263Nm, torque gear stage 2: 700/1,050Nm, turret type: servo turret, tool stations: 12, tool holder: VDI 50, number of driven tools: 12, driven tool speed: 4,000rpm, power (100%/40%): 5/9.6kW, axial torque (100%/40%): 18/35Nm, radial torque (100%/40%): 15/28.8Nm, hydraulic tank: 11l, central lubrication reservoir: approx. 2-3l, mains connection: 3/PE~ 400V, frequency: 50/60Hz, operating current (I_B): 63A, rated current (I_N): 80A, length: 3,250mm, width: 1,980mm, height: 2,090mm, weight: 8.5t, operating hours: 27,271h, including Spinner SERVO-LOAD 110 1500 bar feeder and documentation. On-site inspection is possible.

Drive: servo motors, individually for each axis, max. number of bending slides: 8, spring steel wire diameter: 0.2-1mm, copper wire diameter: 0.3-2mm, max. winding mandrel diameter: 10mm, max. winding spindle travel: 45mm, max. length of rotating initial leg: 50mm, end leg length: theoretically unlimited, winding spindle revolutions: limited by the winding spindle travel of 45mm, control system: 4-axis CNC positioning control Pronumerik Schleicher, the machine operates using DOS-based programming, including pay-off reel, accessories, operating manuals and documentation, well-maintained and in good condition. On-site inspection is possible.

sliding headstock CNC lathe, year 2012, 16311 operating hours, CNC 31i-MODEL B5. Used machine. More info & price on IndustrialBuyer.

turning diameter: 470 mm turning length: 2500 mm control: Siemens Sinumerik 840 D work height max.: 1300 mm swing diameter over bed slide: 750 mm swing over bed: 780 mm diameter of quill: 160 mm taper bore: MK 5 tool numbers: 48 weight of tools max.: 15 kg tool length - max.: 500 mm total power requirement: 123 kVA weight of the machine ca.: 27 t dimensions of the machine ca.: 8,4 x 4,0 x 3,3 m C-axis: - Speed range 0.1 - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis 0.1 - 18000 mm/min - Z-axis 0.1 - 30000 mm/min Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle dr ...

- Includes cabinet and electronic components. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-66

In working order. Auction-ID: A3-46137-4110

- Mobile bridge. - Total installed power approx. 40 KW. - Dimensions of the work table approx. 3650 x 1560 mm. - Z-axis travel: 250 mm. - Maximum workpiece height 150 mm. - Programmable maximum speed in x-y-z directions: 75 -75 -15 m/min. - Tool magazine with 10 positions. - Electrospindle: power 8.50 KW, automatic tool change, for HSK F63 tool holder. - Saw group for grooving in the direction of the X-axis. - Vertical holes in the x-axis direction: 9. - Vertical holes in the y-axis direction: 5. - Horizontal holes in the x-axis direction: 1 + 0. - Horizontal holes in the y-axis direction: 1 + 1. - Remote control panel. - 8 suction cups are included. - 2 x BECKER VTLF 2.250/0 vacuum pumps with a capacity of 244 m³/h each. - Cutting tools and accessories are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The cost ...

- Total installed power 31.50 KW. - Usable working area approx. 2910 x 1310 mm. - Passage height on panel 200 mm. - X-axis travel: 3100 mm, y-axis travel: 1750 mm, z-axis travel: 300 mm. - Programmable maximum speed in x-y-z directions: 25-25-15 m/min. - Tool magazine with 8 positions. - HSD ES919 electrospindle: 8KW-max power. 24000 rpm, automatic tool change, for ISO 30 tool holders. - Grooving saw group. - ISAC SAB 2001 E numerical control. - Windows software. - 6 benches. - 4 lifting modules for heavy parts. - 1 x BECKER U 4.165 SA/K vacuum pump with a capacity of 160 m³/h. - 1 x BECKER KVT 3.140 vacuum pump with a capacity of 132 m³/h. - 1 x PUSKA air tank, capacity 150 litres. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction- ...

• Serial number AA1/013786 • Working table dimensions 3050 x 1200 mm • Panel passage height 280 mm • Travelling way X-axis: 4420 mm, Y-axis: 1720 mm, Z-axis: 400 mm • Maximum travel speed in the axes direction x-y-z: 105-80-25 m/min • Tool magazine with 12 positions •  Electrospindle: power 11 kW, max, 18000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Saw unit with 2,20 kW motor • Vertical drilling spindles in X-axis direction: 5 • 2 heads for horizontal drills • NUM POWER 1040 numerical control • Software Windows / Xilog Plus • RIETSCHLE VTB 250 vacuum pump with capacity 250 m³/h • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-34

Table size 900x560mm, 24 pieces tool holder (empty), 24kVa, with air filter Auction-ID: A1-50476-1

- Includes: - 6 JOUCOMATIC pneumatic cylinders. - Approximately 34 solenoid valves. - Pressure regulator with pressure gauge and filter. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-69

Universal milling head - in working condition - can be picked up immediately and put back into work. Auction-ID: A3-46137-16561

- Includes: - 2 control pedals, transformers, resistors, relays, limit switches, power supply, valves and various accessories. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-65

Complete with tools. In working order. The machine has a brewing length of approximately 3,600 mm and a pressing force of 250 tonnes. Thanks to the CNC control, various bending programs can be precisely set and repeated. Technical data: - Brand: ERMAK - Type: CNC HAP 3600 x 250 - Year of construction: 2008 - Machine: Hydraulic CNC Bending Machine - Brewing length: approx. 3,600 mm - Press force: approx. 250 tons - CNC control - Hydraulic drive - Suitable for bending metal sheets - Including tools and accessories, as visible in the photos The machine is offered in used condition and as shown in the photos. Any dismantling, loading and transport are entirely at the expense of the buyer. Auction-ID: A3-46137-6218

Milling machine Cincinnati Milacron Sabra 750 BJ 1998

STAR SW 20 ist eine CNC-Langdrehautomat mit hoher Präzision, großer Genauigkeit und Zuverlässigkeit. Kapazitäten: 11 Achsen, 2 Spindeln, max. Bearbeitungsdurchmesser 20 mm, Gegenspindel bis 10.000 t/min. Technische Daten: Spindel 3,7 kW, angetriebene Werkzeuge 1,2 kW (8.000 t/min), Schlitten 7 und 5 Positionen, Gegenbearbeitung 8 Werkzeuge (6 angetrieben), Eilgang 35 m/min, Anschluss 50 Hz 3x380 V, Gewicht ~3400 kg, Maße L2600×B1150×H1765 mm. Zubehör: Stangenlader, Lampe, Kühleinheit 150 l, Ölnebelabsaugung ELBARON, Schnittstelle Stangenlader. Erreicht enge Toleranzen; Branchen: Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

X-axis: 293mm Z-axis: 1350mm Y-axis: -65° ~ +65° C-axis: 0,001° Machine us equipped with: - live tooling (5,5kW, 5000rpm) - Y-axis - tailstock - steady rest - chip conveyor - tool setter - coolant filtration system Auction-ID: A1-50690-1

FANUC Series 21i-T Control Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-24

Specifications: X-axis: 400mm Y-axis: 560mm Z-axis: 400mm A-axis: +120° ~ -30° C-axis: 360° Machine is equipped with: - chip conveyor - through spindle coolant - oil cooler - 40 position ATC Auction-ID: A1-50690-18

OKUMA OSP-P300L-R control, with bar feeder TOP AUTOMAZIONI XFS370 Excludes machining media, tools and air filter above the machine AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-22

- Batch of electronic components. Includes: - 1 numerical control NUM. - 3 GEC ALSTHOM electronic drive modules. - 1 LS 12.2 kVA frequency inverter. - 1 OMRON 1.5 kW frequency inverter. - 1 bank of relays and connection terminals. - 2 SIKO encoders. - Pneumatic components, including regulators with pressure gauge, valves, cylinders, fittings and accessories. - 1 desktop computer. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-77

Manual 4th +5th axis Swivel-Tilt table Machine can work horizontally as well as vertically. Head with drill pinole Rapid walking 5 mtr/min. SK 40 hydr pull-on device Hor + Vert. ISO 40 Image DIN 69871/1 New keyboard Portable control (electronic handwheel) Auction-ID: A1-47366-146

Disassemble yourself, Forklift present 2 tons. Auction-ID: A1-47366-135

Machine is equipped with: - Macro’s - Rotation and scaling - Rigid Tapping - Tool Center Point Control & Dynamic Work Offsets - M19 Spindle Orientation - High Speed Machining - Visual Programming System - Media Display - 4th Axis Drive - 5th axis Drive - 1GB Memory - Wireless Networking - Compensation Tables - Through Spindle Coolant - 15.000 RPM Spindle Auction-ID: A1-50690-5

Technical data: Manufacturer: DMG MORI Model: CLX 450 V4 Year of manufacture: 2023 Control: SIEMENS Operate 4.7 on SLIMline® Multi-Touch (19\") Main spindle: A2-8, 17 / 25.5 kW, max. 4,000 rpm C-axis and Y-axis (±60 mm) 12-fold servo turret VDI 40 with 12 driven tool stations and 6 BT stations Max. bar passage: 80 mm Direct position measuring system in X and Y axes Hydraulically movable tailstock External Electronic Handwheel DMG MORI IoTconnector Special equipment: Hydraulic 3-jaw chuck SMW KNCS-N 225 with quick-change system (Ø66 mm passage) Automatic NC tailstock with programmable compression force (1.4–8.0 kN) incl. foot pedal High-pressure coolant system 12 bar with double filter system Coolant spray gun (5 bar) Mechanical oil mist separator AFS 600 (600 m³/h, filter class H13) Coolant/compressed air switchover via turret head DXF import for SIEMENS cont ...

Joint milling, adhesive unit, pressure zone, chop saws, radius milling, radius scrapers, flat scrapers Auction-ID: A1-47366-124

6-60 mm, joint cutter, multi-cutter, copy, scrapers radius/phase, Auction-ID: A1-47366-123

Connected load 28 kVA, fuse 50 A, operating hours 6000 h, incl. plasma power source KJELLBERG HiFocus 161i Neo with automatic gas mixing console and 2 cutting heads and wear parts package, without filter extraction system and without technical gases Auction-ID: A1-50373-1

Pointed knife above, new multi V69° below. Auction-ID: A1-47366-49

Machine is equipped with: - Macro’s - Rotation and scaling - Rigid tapping - M19 spindle orient - High speed machining - VPS editing - Media display - Max. Memory 1GB - Compensation tables - Through spindle coolant - 15.000rpm spindle - chip conveyor - oil mist filter - large coolant tank - 2 vices - Vacuum zero-point clamping system - Probe system - 15 HSK-63A Tool holders Auction-ID: A1-50690-2

FANUC Series 18i-TB control, with TOP AUTOMAZIONI FU350SX bar feeder - year 2024 Excludes machining media, tools and air filter above the machine AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-21

max. Displacement speed 65 m/min Max working speed 45 m/min. Controller HNC, 4 axes simultaneous Motor HNC motor Automatic tool change Swivel milling motor can mill an angle with oblique phase to the material. Aluminum vacuum table divisible into zones, lockable on the front by means of switches Auction-ID: A1-47366-95

12-position turret, 500GH spindle, MORI SEIKI MSD-501II control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-51034-14

- Includes: - Magazine unit for ISO 30 tool holders with 12 positions (an elastic collet is missing). - Horizontal milling unit with 2 heads, 3.70 KW-max motor. 12000 rpm. - Brushles servomotor: power 1.40 KW-4000 rpm. - Brushles servomotor: power 0.75 KW-5000 rpm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-75

Total length with entry table: 900cm. Auction-ID: A1-47366-9

DL-35M motorized turret, FANUC Series Oi-TF control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-51034-13

FANUC Series 32i-MODEL B control, with bar feeder TOP AUTOMAZIONI XF365 Excluding machining supports, tools and above-machine air filter AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-20

X-axis: 260mm, Y-axis: 100mm (±50mm), Z1-/Z2-axis: 800/800mm, swing diameter over bed: 660mm, swing diameter over cross slide: 540mm, distance between spindle noses: 1050mm, max. turning diameter: 500mm, max. workpiece length: 1000mm, max. bar capacity: 65mm, spindle speed: 0-5,000rpm, torque: 25Nm, drive power: 6.7kW, number of driven tools: 12, number of tool stations: 12, shank diameter for boring bars: 40mm, tool change time: 0.7s, speed range of driven tools: 0-12,000rpm, torque of driven tools: 30Nm, drive power of driven tools: 10kW, compressed air connection: 6bar, connected load: 40kVA, control: Sinumerik 810D PCU20, length: 3320mm, width: 2070mm, height: 2341mm, total weight: 8.45t, operating hours: 89,129h, with documentation and service reports, regularly maintained. An on-site inspection is possible.

A CNC laser cutting machine with a 5kW CO₂ laser and automatic loading and unloading system is offered. Working area X/Y/Z: 4000mm/2000mm/115mm. Laser power: 5000W. Laser unit: CO₂ laser TLF 5000. Max. sheet thickness mild steel: 25mm. Max. sheet thickness stainless steel: 20mm. Max. sheet thickness aluminum: 15mm. Operating hours: Laser-on hours: 39625h. Beam-on hours: 14346h. Control: Siemens Sinumerik 840D. The system is equipped with an automatic loading system that supports sheet metal handling. Inspection possible by prior arrangement.

sheet width: 6500 mm plate thickness: 3 mm back stop - adjustable: 1000 mm dimensions: 7300x2400x2300 mm Weight: 20000 kg Equipment/accessories: - 1 x set of knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 246 mm turning length: 445 mm control: Siemens 840D spindle speed: 6.000 U/min rapid traverse Z-axis: 30 m/min rapid traverse X-axis: 24 m/min tailstock travel: 450 mm max. weight between the centers: 110 kg total power requirement: 24 kVA weight of the machine ca.: 3,95 t dimensions of the machine ca.: 3,05 x 1,65 x 1,75 m CTX 310: - Powered tools with C-axis - Tailstock Working area: - Machine bed length: 1,625 mm - Center height: 365 mm Tailstock: - Max. tailstock force: 400 daN Tool holders: - Number of tools: 12 - Tool holder: VDI 30 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TSUGAMI HS207 CNC automatic lathe was built in 2011 in Japan by TSUGAMI CORPORATION. The machine is designed for the mass production of small parts with complex geometries, used in various industries. It enables precise turning, drilling and threading of bar material with a maximum diameter of 20 mm. Machining is performed in 9 numerically controlled axes using the main spindle and a sub-spindle. This configuration enables operations to be performed on both sides of the workpiece without the need to re-clamp it. Once machining on one side is complete, the workpiece is transferred to the second spindle, which continues the operation from the opposite side. As a result, successive operations can be performed in a single cycle, which speeds up production and ensures high dimensional repeatability of the finished parts. The TSUGAMI HS207 is operated using a FANUC Series 31i-MODEL A CNC ...

STIGAL DYNAMIC plasma-gas cutting machine was built in 2014 in Poland by STIGAL Marcin Stępień. The machine is used for the precision cutting of sheet metal with a maximum thickness of 60 mm. The cutting process is performed automatically on a work table with dimensions of 3000 x 2000 mm. The CEBORA PLASMA PROF source generates a stable plasma arc, which ensures effective cutting of the material and maintains optimal operating parameters even during intensive use. A spark shield is installed next to the plasma torch to protect the eyes of the operator and anyone else in the vicinity of the operating machine. Thanks to this, the operator can carry out their work without the need to wear safety glasses during most of the cutting process. The shield is raised and lowered directly from the control panel. Fumes and dust generated during cutting are removed by an electronically control ...

Key data: 3000 mm, 1500 mm, 10000 W

10 kW fiber laser from Bystronic, which will be available from 01.02.2027. We sell our Bystronic ByStar Fiber 3015 Dynamic Edition F10000 directly from our own production facility – no dealer, no intermediate margin. The system runs in our production until handover. So you can visit it under power and see it cut with your own parts before you decide. WHY THIS MACHINE • 10,000 W fiber laser: mild steel up to 25 mm, stainless steel and aluminum up to 30 mm, brass 15 mm, copper 12 mm – one machine for everything from thin sheet to thick sheet • Dynamic Edition: 120 m/min parallel to the axis, 170 m/min simultaneously – high throughput in series and for urgent orders • Automatic nozzle changer with 64 positions + Detection Eye: set-up times reduced, low-manpower production possible • Changing table (25 s table change): loading and unloading while the machine is cutt ...

SMEC SL 2500LSY ist eine CNC-Drehmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Z-Hub 1375 mm, X 235 mm, Y 100 (+/-50) mm; BMT65-Revolver 12 Positionen; Spindelbohrung Hauptspindel 78 mm, Gegenspindel 45 mm. Technische Daten: Eilgang X 18 m/min, Y 10 m/min, Z 24 m/min; Hauptspindel bis 4500 rpm (11/18.5 kW, 313 Nm), Gegenspindel bis 6000 rpm; angetriebene Werkzeuge 5000 rpm (3.7/5.5 kW, 95 Nm); Anschluss 3x400 V 50 Hz, 45 kVA; Gewicht ~7800 kg; Abmessungen 4125×2030×2090 mm. Zubehör: 3-Backenfutter, Kühlmittelsystem, Späneförderer, Satz Werkzeughalter. Erzielt enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizintechnik, Uhren- und Maschinenbau. Technische Daten ohne Gewähr

Auction-ID: A1-50373-8031

Brand: Metaleen Tools & Equipment (visible on the frame of the machine). Type: WE67K-160T/3200. Year of manufacture: 2025, deduced from the serial number/order date. Serial number: 2025040195. Capacity t: 160 tons. Working length mm: 3200 mm. Control, brand, type: Delem DA-53T-[N], serial number 244400017, Delem PN D8087-007, software version V1.8.23, produced by Delem, Eindhoven (NL). Auction-ID: A3-46142-11241

USED TORNOS ENC 16 CNC lathe Serial No.: 58145 Year: 1990 Equipped with 1 SIEMENS SINUMERIK CN Rotating tools 1 TORNOS bar feeder Machine dimensions and weight : 2300x1200xH1600mm - weight 2500kg - bar feeder: 5000x700xH1300mm - weight 800kg Auction-ID: A1-50950-76

USED BIGLIA B436 Y2 CNC lathe Serial No.: 11804 Year: 2013 Main spindle Bar diameter: 36 mm Max. turning diameter: 100 mm Max. turning length: 100 mm Spindle bore: 46 mm C-axis: 360° indexing increment 0.001° Sub-spindle Maximum bar diameter: 36 mm Max. turning diameter: 100 mm Max. turning length: 100 mm Max Spindle Speed: 7000 RPM Spindle Bore: 46 mm C-Axis: 360° Indexing Increment 0.001° Upper Turret Number of Positions: 12 Number of Motorized Positions: 12 Axis Travel: X: 85 mm - Y: +25/-25 mm - Z: 300 mm Lower Turret Number of Positions: 12 Number of Motorized Positions: 12 Axis Travel: X: 85 mm - Y: +25/-25 mm - Z: 300 mm Equipped with 1 MITSUBISHI M700 CNC 1 Clamping on the main spindle and on the sub-spindle 1 Parts retrieval belt 1 Tool measuring arm 1 Muller 70 bar HP pump 1 Set of fixed and rotating tool holders 1 Chip conveyor 1 IEMCA BOSS 545E bar feeder Dimensi ...