134,062 used machines on RESALE, but how to find them? Machine Search
Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.
Machine type: YE 60 Manufacturer: ERBA Power kW: 0.3 Total volume: 50 lt. Description: The ERBA separation line YE 60 is used to separate workpieces and grinding medium. This can be used as a stand-alone machine or in combination with other machines, such as the ERBA Turbo (centrifugal power system). The separation floor can be changed quickly and easily depending on the requirements. Optionally, a frequency converter can be installed, which enables the infinitely variable adjustment of the motor speed. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. ...
Key data: 350 mm, 1470
Machine type: Turbo 60 Manufacturer: ERBA Power kW: 3.0 Total volume: 60 lt. Description: The ERBA Turbo 60 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 60 is available in dry and wet versions. It can be linked to the separation section listed below. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for ...
Bread slicer Wabäma Type Piccolo 380.10 HA MB Cutting width 10mm semi-automatic 230 Volt 0.75 kW
Automatic Cutting width 9mm 192 kg 1.1 kW 400 Volt - 50 Hz
Cutting width adjustable from 4-14 mm analog control Sickle knife machine Stainless steel cladding on rolls with traces of usage Voltage 400V / 50Hz
ALREADY SOLD Hypet 500 for sale We only sell the machine with a mold 144 cavity complete mold 29/25 neck finish preform weight 10.63 grams made by Husky This machine HPP 4.0 and ISS, fast speed. Cycle 6.2 (83612 preforms per hour) 2 Million preforms per day Manufactured 2011 Installed 2012 380v 50hz Excellent condition
Very good machine with spare parts worth 3000,00â?¬.
with boiler for max. 125 kg flour or 200 kg of dough with 2 timers automatic Boiler diameter 90 cm Boiler drive by Reibrand Boilers are locked with hand extendable with 2 timer relays automatic 2 speeds fast and slow Flour dust cover Spiral and tool made of stainless steel Boilers are also made of stainless steel Machine is anchored to the ground with 2 screws Machine head moves up or down when the boiler is driven in and out
used
The HKB series swivel machines are used for bending thin sheet metal. Due to their compact design, they fit easily into small workshops and cover a wide range of applications with their segmented upper tool. With an adjustable angle stopper, these swivel machines are also suitable for the production of small batches. Compact and torsion-resistant Segmented upper tool for many bending options Integrated, manual bend compensation Adjustable angle stop for series production Hands free Foot control of the upper bolster clamp Workspace Working length 1270 mm Sheet thickness (max.) – 400 N/mm² 2 mm Dimensions (length x width x height) 1.6 m x 0.9 m x 1.18 m Weight 330 kg Angle range of the bending beam 135°
for cleaning their sheets with oil tank (food oil) for 60x40 cm sheets 2-edge on the short side for 58x78 cm sheets 2-edge on the long side Shipping costs on request
Flaschenreinigungsmaschine, Hersteller Swiss PAC, Baujahr: 1992, Leistung 3.500 - 6.000 Flaschen / Stunde. Bottle washer washing machine, Made Swiss PAC, Year: 1992, Capacity 3.500 - 6.000 bph, in stainless steel
Pull-off trolley with 9 cloth pull-off apperates suitable for Heuft VTR Thermo Roll / Daub RDTO Thermo Roll oven. The pullers can be used for ovens with 2 times deep sheet metal mass 80x60cm. With this pull-off appress and a stone slab trolley, they can also bake in the Thermöl wagon oven on stone served by a Man.Option we also have the stone slab cart for two times deep oven in the warehouse. with 9 pullers on rolls Stainless steel trolley Dimensions wagons: Height: 196 cm Width: 160 cm Depth: 90 cm
Table clamping area: 310 x 1400 mm Table movement x: 950 mm Table movement y: approx. 325/345 mm Table movement z: approx. 500 mm Spindle speeds: 20 - 1500 rpm Feeds longitudinally and transversely: 18 - 620 mm/min Feeds vertical: 18 - 620 mm/min electr. Connection: 380 V kW Space requirement: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg
1 LIBA type COP 2 HS, width 170", gauge 28, year 1980, with PROKOSTOP 4044 1 LIBA type COP 2 HS, width 170", gauge 24, year 1980, with PROKOSTOP 4044
Specifications Control Siemens Sinumerik 840 Dsl Main dimensions and travels Face plate diameter 3,500 mm Circumferential diameter (max.) 4,000 mm Workpiece height (max.) 3,000 mm Total height of the machine 7,250 mm Maximum workpiece weight 50,000 kg Table base Y Horizontal table displacement 2,000 mm Crossbar Vertical adjustment of the crossbeam 1,500 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Stations Crossbeam Support (Left) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Changer Main Drive: Main motor power 100 kW Face plate speed range 1-100 rpm. Maximum torque at the face plate 100 ...
Key data: 4000 mm, 5000 mm
Specifications Control SIEMENS SINUMERIK 840 Dsl Main dimensions and travels Face plate diameter 4,000 mm Circumferential diameter (max.) 5,000 mm Workpiece height (max.) 5,000 mm Total height of the machine 9,250 mm Maximum workpiece weight 80,000 kg Table base Y Horizontal table displacement 2,500 mm Crossbar Vertical adjustment of the crossbeam 3,200 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support - 2740 + 2740 mm Vertical displacement of the chisel slider 1,800 mm Cross-section of the chisel slider 250x210 mm Side Support (Right) Vertical adjustment support -25 + 2170 mm Horizontal displacement of the chisel slider 1,000 mm Cross-section of the chisel slider 250x210 mm Turning diameter max./min. 4,500/2,500 mm Main Drive: Main motor power 100 kW Face plate speed range 0.63 – 63 rpm. Maximum torque at the ...
Code: 0705 Brand: LANDONIO - ITALIA Model: LAR 600 Double disc sanding machine for working of patterns , moulds, wood pieces , metal and synthetic material Disc diameter mm 600 Motor Hp 6 Table size mm 800 x 300 Tables inclination 0-30° upwards/downwards Disc rpm 950 Spare disc Overall dimensions : mm 1250 x 800 x 1150 h Weight kg 580
1 stitch bonding machine KARL MAYER type MALIMO MALIWATT 1405C N3600, machine fully overhauled in 2013, width 3600 mm, gauge 18, 2 bars,
1 PIMATEX type MTFC020 high temperature yarn dyeing machine vertical type, capacity 20 Kg, year 2004 carrier with 6 swords and each sword carries 4 cones gauge 6" = 24 cones each batch 1 PIMATEX type MTFC030 high temperature yarn dyeing machine vertical type, capacity 30 Kg, year 2001 carrier with 9 swords and each sword carries 4 cones gauge 6" = 36 cones each batch 1 PIMATEX type MTFC050 high temperature yarn dyeing machine vertical type, capacity 50 Kg, year 2001 carrier with 16 swords and each sword carries 4 cones gauge 6" = 64 cones each batch 1 PIMATEX type MTFC100 high temperature yarn dyeing machine vertical type, capacity 100 Kg, year 2001 carrier with 24 swords and each sword carries 6 cones gauge 6" = 144 cones each batch 1 PIMATEX type MTFC160 high temperature yarn dyeing machine vertical type, capacity 160 Kg, year 2001 carrier with 36 swords and each ...
Machine type: ESA 15 Manufacturer: ERBA Power kW: 3.37 Bdw3H9Emd2R Mud basket volume: 15 lt. Description: The ESA 15 recirculating centrifuge from ERBA (patent no.: 201606464) is a professional stand-alone system for the treatment of process water for mass finishing systems. It has a waste water tank with agitator, as well as a pure water tank and can produce up to 600 litres of fresh water per hour. Dirt particles are separated from the process water with 1500 g force and removed as a solids cake. The programmable logic controller (PLC) with touchscreen makes the condition of the machine particularly simple. The ESA 15 is also very space-saving due to its compact design. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with addi ...
Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG Burner: Probat – direct, modulated Chaff cyclone with a wheeled bin for easy chaff disposal is included with the roaster. A green coffee loader and destoner can also be included. The roaster will undergo a major refurbishing, the process will include: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing a new drum cover, - installing new direct drive motors with speed control on the drum and exhaust fan, - making a new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profiling), - installing new cooling bin sheathing, - rebuilding the burner, - building a new c ...
Spreading attachment Küpper-Weisser STA80 W12H. Attachment device for Unimog, trucks, equipment carriers, etc. with municipal hydraulics. Content 1.2 cbm . Equipment: tarpaulin folding roof, control panel and documentation. Further spreading technology as well as snow clearers in various designs and sizes stock edstocked! Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...
Semi-automatic tube filling and sealing machine for PE, laminate and metal tubes, demonstration machine Capicity 10-20 tubes / min. Filling range from 5-250ml Tube sizes from D.13.5 - D.50mm with different format sets Ultrasonic sealing unit
1 x Universall tool-feeding machine Lid FP 4 Built: c.1970 Very robust and rare conventional machine in good condition. Technical data: Travel: X: 700 Y: 400 Z: 450 mm Spindle speeds: 31.5 - 1,600 rpm (18 levels) Tool holder: ISO 40 Pinole stroke: 115 mm Feed in X/Y/Z Feed range: X/Y/Z 5 - 500 mm/min (infinitely adjustable) Rapid response: X/Y: 10 - 500 mm/min Z: 5 -250 mm/min (18 levels) swivel handling table Clamping area: 860 x 500 mm Accessories: 1 x horizontal counter bearing 5 x horizontal frond spine Bftj7cazem 10 x vertical fraes aufnahme 36 x tension tension ingesheis from 0.5 - 18 mm 0.5 mm rising 5 x Direct clamping pliers D: 12/14/16/18/20 mm 1 x machine vice Manual various distance rings and accessories for milling machines complete documentation The machine can be inspected at our warehouse under electricity. A 3-axis digital ...
Table clamping area: 560 x 240 mm x-way: 300 mm y-way: 275 mm z-way: 200 mm Spindle holder: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Total power requirement: 1.5 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 750 kg
Model: Gothot 90, Type: JRHH5ARGA Year: 1958 Capacity: 90kg of green coffee per roast (360kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Gas: natural gas/LPG Burner: Gothot - indirect Pneumatic green coffee loader, destoner and cyclone included The roaster will be fully refurbished including: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing new direct drive motors with speed control on the destoner, drum and exhaust fan, - installing new pneumatics, - making a new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profiling), - installing new cooling bin sheathing, - repairing the burner (optional: new burner) - new paint - thermal paint on the parts that are exposed to high temperatures and powd ...
The machine packs in full cartons or trays. Capacity up to 80 cartons per minute. The change to the new carton format takes place from the operator panel - very quickly. Siemens S-7 control. Machine dimensions: Length: 9m Maximum width: 3.2m Height: 2.4 m. Weight: 3.5 tonnes The machine is equipped with a set of necessary spare parts for 2-3 years of operation. The machine after complete renovation in very good condition. Ready to work. We provide 12 months warranty. The condition of the machine and the level of modernity ensure many years of operation.
Key data: 490 mm, 1120 , 990
Machine type: EVP 250 Manufacturer: ERBA Power kW: 1.5 Total volume: 250 lt. Description: The EVP 250 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has an electrical control cabinet and can be equipped with a fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may ...
Weibert FR3 Saw milling Demonstration device Format sliding table 2300mm or 2600mm Cutting height: 103mm Auslegertich kpl. Saw blade: swivel, max.315mm 3KW motors Milling: rigid 90° Milling rpm: Speeds: 1500/3500/6000/8000 rpm. Safety rails milling stop 500mm Right- and left-hand-running milling cutter WJ-400100
Key data: 3560 mm, 2466 , 1800
Machine type: EVP 3000 Manufacturer: ERBA Power kW: 15 Total volume: 3000 lt. Description: The EVP 3000 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has an electrical control cabinet and can be equipped with a fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size m ...
Roller spreader for rear mounting, drive via a 12 volt electric motor with overload protection (8 A). Container contents 120 ltr. , cam roller with interchangeable, asymetric cams (suitable for sand, salt and shards or granules)Roll width 125 cm, stirring shaft to prevent lump and bridge formation, low-wear 10-stage scattering volume regulation by adjustable spring bottom with rubber apron. With grating for accident protection and cable remote control (start/stop). Without growers! Scattering length salt approx. 5-6 km, sand approx. 1 km (manufacturer specifications) Built in 2012, unused, technically and visually as new condition, here and there paint somewhat repelled. Other roller spreaders, also trailers, self-loaders, drive hydraulic, PTO shaft or wheel stock. Winter service technology of all kinds, also slingshot spreaders, snow shields, snow blowers, tractors and used compon ...
Libra / labeler Bizerba GV 7000, built 1999, in a very good used and functional condition. Fully automatic scale with labeler / price printer, programable, feed and feed belt. Dimensions W/D/H 260/65/170 cm. Operating voltage 230 volts, compressed air connection 6 bar required. Workshop-tested, ready for immediate use. More on request.
Key data: 115 mm, 1540
Machine type: Turbo 14 Manufacturer: ERBA Power kW: 0.55 Total volume: 14 lt. Description: The ERBA Turbo 14 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces in a short process time. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 14 is available in dry and wet versions. It can be linked to a separation section. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will ...
Butter Forming & Wrapping Machine Manufacturer: Trepko Type: XPG40 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k
Mori seiki MT 2000 multitasking lathe :::TECHNICAL SPECIFICATIONS::: CNC model: Mori Seiki - CNC version: MSC 501 - Spindle nose: ASA 6 - Spindle power: 22Kw Number of main spindle speeds: 6000 - Turning diameter: 540mm - Bar passage: 65mm - Turning length: 1020mm Number of tools: 60 Tool holder: CAPTO C6 Spindle power: 18Kw Number of spindle speeds: 8000 X-axis travel: 565mm Y-axis travel: +-80mm Z-axis travel: 1077mm Swivel B-axis travel: + - 120 ° degrees Fast feeds for linear axes X Y Z: 24m/min High refrigerant pressure: yes Pressure value: 80bar External tank system with filter: yes Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 155mm First turret Z-axis travel: 1067mm Sub-spindle: yes Spindle nose: ASA 5 Number of counter ...
Semi - Automatic Butter Extruder and Shaping Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Manufacture : Dairy Machinery UK Model : DMUK EXSH1 Usage : Butter Extruding and Shaping Machine Shapes : Various Shapes and Sizes Condition : New Warranty : 12 months Spare Parts : Dairy Machinery UK
Make Benhil Model: 8311 Junior Usage: Butter filling & wrapping Capacity: Up to 40 packages/min Product weight: 250 g Hopper with 2x screw augers Aluminium hopper and augers & Stainless Steel Hopper Condition : Good
[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears
Machine: Benhil Multipack 8304 mini portion Capacity: up to 110 packets/min Pack size: 7,5, 10, 12,5 gram Dimensions: 30 x 40 x height adjustable max 20 mm Product: Butter / Margarine Wrap material: Aluminium foil Dimensions: Approx. 200 x 150 x 200 mm (l x w x h) Weight: 1.400 kg (gross) Electricity: 1.1 kW
Showroom machine / exhibition machine CMS Tecnocut - IDROLINE S 2040 Axle experience: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 200 mm C-axis: endless B-axis: +/- 60° Facilities: - 5-axis cutting head JD5Ax for inclined cuts up to 60° and automatic angle correction - Chain conveyor for automatic sand application - Automatic lifting doors to secure the working area - Sand dosator for automatic software controlled sand dosing - Central lubrication - Altitude probe with anti-collision system High pressure pump Greenjet Electric high-pressure pump with directly controlled servo motor Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min DÃ?SE: 0.40 mm max. Incl. assembly / training and 12 months warranty!
Key data: 135 mm, 1550
Machine type: Turbo 20 Manufacturer: ERBA Power kW: 1.1 Total volume: 20 lt. Description: The ERBA Turbo 20 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces in a short process time. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 20 is available in dry and wet versions. It can be linked to a separation section. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will ...
McIntyre Euro-strip 500 Cable Stripper The perfect bench-top cable stripper. Compact and efficient The Euro-strip 500 is one of the smallest in the range and is a low energy, large capacity unit that is easy to move around a yard. The Euro-strip Cable strippers are designed for simple, dependable operation without the need for constant adjustment, which suits all different material sizes. Taking up minimal space and emitting very low noise, the Euro-strip 500 will prove to be a valuable addition to your business.
Key data: 220 mm, 1550
Machine type: Turbo 35 Manufacturer: ERBA Power kW: 1.5 Total volume: 35 lt. Description: The ERBA Turbo 35 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 35 is available in dry and wet versions. It can be linked to the separation section listed below. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will be happy ...
Wabäma Economy Plus bread cutting machine with long bread inserting tray suitable for 52cm of bread. -with sickle knife -with oiling -Built in 2007 -Cutting width adjustable -three-phase current 400 volts -Rated power 1.9 A -Control voltage 24 volts -Operating voltage 24 volts -Weight 285 kg
CMS Tecnocut Easyline Cutting range / axis experience: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 150 mm Uiaw3u8 C-axis: 630° B-axis: +/- 60° Included equipment: - 5-axis snow head incl. angle correction - Sand dosing and vacuum monitoring - Height scan - CAD/CAM - Laser - Central lubrication CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical data Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min Opening diameter DÃ?SE: max. 0.40 mm The pressure translator with directly driven servo motor offers the following advantages: + Energy efficient + Proportional power consumption + no maintenance-free hydraulics + 75 dBA + Low maintenance due to 60% less structural components + internal water pump + ...
Key data: 270 mm
Machine type: YE 200 Manufacturer: ERBA Power kW: 2 x 0.3 Total volume: 200 lt. Description: The ERBA YE 200 separation line is used to separate workpieces and grinding medium. Two motors provide the necessary movement of the screen. The YE 200 can be used as a stand-alone machine or in combination with other machines, such as the ERBA Turbo (centrifugal power system). The separation floor can be changed quickly and easily depending on the requirements. Optionally, a frequency converter can be installed, which enables the infinitely variable adjustment of the motor speed. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to ...
Below you can see the first impressions of our mobile screening machine, which was designed for separation tasks in the outdoor area. The system can separate different types of material into two fractions, depending on the selection of the mesh widths, the degree of the sifted material can be adjusted. The two fractions are discharged into wheelbarrows via the outlets of the screening machine. For the removal of fine goods, the stern must be removed. The coarse material enters another wheelbarrow or a suitable container via a second slide. The mobile screening machine can be rented and purchased. Ready to drive 450Kg
maximum number of results exceeded
please refine your search
