cnc drilling machines used for sale

Key data: 400 mm, 1000 mm

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2003 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: 5 - Spindle speeds: 2 - Constant cutting speed: 0-700 / 700-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW G0Cmy7Z - Power DC motor Z-axis: 12 Nm - Power DC motor X-axis: 4 Nm - Motor pump power:  ...

We have a HURCO CNC milling machine from 2008 to offer: HURCO VMX 64T Travel: X1625 Y860 Z760 Speed max. 8000 rpm (limited by the new bearings after spindle replacement) Sporadic clamping of the interchangeable arm

Key data: 2500 mm, 1200 mm, 1000 mm

Fixed Bed Milling Machine CORREA A25/25 Travel X: 2500 mm Travel Y: 1200 mm Travel Z: 1000 mm CNC HEIDENHAIN TNC 355 Spindle: SA 50 Spindle motor: 30 CV Spindle speed: from 2 to 3000 RPM Table size: 3000 x 1000 mm Year of construction: 1990 Maxi eligible load on table: 7 T Manual Swivel Head Voltage: 380 V Dimensions (L x W x H): 5000 x 3000 x 3000 mm Weight: 16,5 T

Inv. Num. : 7971 Type: Lynx 2100 LYB Producer: Doosan Created: 2022 Parameters: Control system: Siemens Sinumerik 828D Maximum turning length: 510 mm Max. turning diameter: 300 mm Maximum length of travel in the X-axis: 205 mm Maximum length of travel in the Y-axis: 105 mm Maximum feed in the Z-axis: 560 mm Maximum main spindle power: 15 kW Maximum spindle speed: 4500 1/min Length: 2880 mm Width: 1711 mm Height: 1921 mm Weight: 3900 kg

Control: Fanuc Series 21i-TB Turning length: 2,000 mm Turning diameter: 680 mm Max. speed: 1,800 rpm Revolver Sauter: VDI 40 Accessories - Three-jaw chuck - Coolant device -Lunette - Various tool holders - Tailstock Manual Weight: approx. 6,300 kg

Deckel FP3A 2820 - CNC Milling Machine - Deckel Contour 3 CNC control - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Hydraulic tool clamp - Automatic speed manual transmission - Automatic clamping in X/Y/Z axes - Automatic central lubrication - Coolant device - Direct displacement measurement - Collision protection clutch in Z/Y axes - Built in 1987 Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke vertical: 80 mm Cpovd9Rv - Vertical milling head can be moved to the headrest: 150 mm Main Drive: - Motor: pole-switchable three-phase brake motor and manual transmission with clockwise/counterclockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Level Jump: 1.25 - Tool holder: SK40 (M16) - Tool  ...

The Colchester Combi 2000 has been overhauled and is in very good condition. Spindle motor power: 7,500 W Year of Make: 1998

General Manufacturer: Spinner Type: SB 32-V4 Year of Make: 2016 Control: Fanuc Series 32i Model B Travels: X 250 mm Z 285 mm Switch-on hours: 46,318 h Spindle Spindle speed: 8,000 rpm Spindle Passage: 32 mmin Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: C-axis Preparation Interface Bar Feeder Linear Tool Carriers Collet chuck

Key data: 356 mm, 406 mm, 4000 1/min

Machine Details Stock number 1105-04050 Machine Type: CNC Lathe - Inclined Bed Machine Make HAAS Type SL 15 Year of construction 2019 Condition Control type: CNC Control Haas Storage location HAGUENAU Country of origin Delivery time immediately Freight base from location Price Technical details Turning diameter 356 mm Turning length 406 mm Control Haas Chuck diameter 210 mm Passage 51 mm Circumferential diameter 480 mm Speed 4000 rpm Power 407 Nm Power 15 KW Tool Changer 10 VDI Gear stages 0 Total power requirement 25 kW Machine weight approx. 5 t Space requirements approx. 3.3 X 2 X 1.9 H m Information CNC HASS LINING DIA 210 MM SPAENEFOEDERER TAIlSTOCK

Travel: 1000mm/560mm/1100mm, Tool holder: ISO 50, Quill stroke: 125mm, Speed: 2000rpm, Feed: 3000mm/min, Rapid traverse: 6m/min, Max. workpiece weight: 800kg. Machine dimensions X/Y/Z: approx. 1020mm/1700mm/2650mm, Weight: approx. 7100kg, CNC 432 control, Hours: 7077h. Documentation available.

Details Turning diameter 165 mm Turning length 1000 mm Total power requirement 2 kW Turning diameter over bed 335 mm Rotary diameter via tool carriage 310 mm large turning diameter via cross slide 168 mm Bed width 250 mm Main spindle diameter 42 mm Main spindle nose CAMLOCK n-5 - DIN 55027 Morse taper 4 Spindle speeds 9 Speed range: 60-2000 rpm max. working feed 0-5000 mm/sec Rapid traverse 5 m/min Shaft diameter 48 mm Tailstock-Spindle Travel 140 mm Machine weight approx. 1100 kg Control CNC Control Name FANUC 21i/210i

x-travel 800 mm y-travel 500 mm z-travel 460 mm Table size 1000 x 500 mm Spindle holder ISO SK 40 Spindle speeds - infinitely variable 31.5 - 6150 rpm Operating voltage 380 V CNC control heidenhain 425 Rapid traverses 6000 mm/min Quill stroke 90 mm Coolant tank l Total power requirement 13.5 kW Machine weight approx. 3.1 t Dimensions approx. 2.20x2.70x2.35 m Hydraulic tool clamping full 4th axis + 5th axis +45° -20°

Universal CNC cycle separation machine of the brand Pinacho suitable for tooling, fixture construction, training and mold making Circumferential diameter 360mm Center width 1000mm Control Fagor 8055 Tailstock MK 3 Tool station Barufaldi 6-fold Speed 1-4000rpm Connection 380V - 5.5 KW

Universal CNC cycle separation machine of the brand Pinacho suitable for tooling, fixture construction, training and mold making Circumferential diameter 360mm Center width 1000mm Control Fagor 8055 Tailstock MK 3 Tool station Barufaldi 6-fold Speed 1-4000rpm Connection 380V - 5.5 KW

Universal lathe of the Weiler brand suitable for tooling, fixture construction, training and mould making Tip Height : 280mm Speed :48-2500 rpm Tip height : 280 mm Circumferential diameter over bed : 570 mm Circulation diameter over face slide : 340 mm Center width : 1,000 mm Rhqel FULCRUM SHAFT Spindle head DIN 55027/DIN ISO 702-3 : Gr. 8 Spindle bore : 83 mm Spindle diameter in front bearing : 120 mm MAIN DRIVE Drive power 60 %/100 % ED : 15/12 kW Speed range : 1 – 2,500 rpm Number of speeds : infinitely variable FEED RANGE Number : infinitely variable Longitudinal : 0.001 – 10 mm/rev Plan : 0.001 – 10 mm/rev Longitudinal feed force : 10,000 N Feed force plan : 7.000 N Max. longitudinal rapid traverse speed : 6/3 m/min THREADING AREA Metric threads : 0.1 – 400 mm Inch thread : 56 – 1/4 TAILSTOCK Quill ...

Machine type: Lathe - cycle-controlled Manufacturer: WEILER Type E30 Year of manufacture 1991 Weiler control Country of origin Germany Additional information Cycle-controlled lathe HAMLET - E30 Technical details Turning diameter max. 330 mm Turning length 750 mm Weiler control Center height 165 mm Circumferential diameter over bed 330 mm Circulation diameter max. via face slide 160 mm Slide travel 180 mm Bed slide longitudinal travel 395 mm Main spindle: Speed range - main spindle 1 - 4,500 rpm/-1 Drive power - main spindle 9 / 11 kW Max. torque 165 Nm Spindle head DIN 55027 / 5 Spindle diameter in the vord. Bearing 70 mm Spindle bore 40 mm Usable rod diameter ( - ) mm Tool carrier: Type MultiFix Turning chisel shank cross-section 20 x 20 mm Tailstock: Quill stroke 110 mm Quill diameter 50 mm Tailstock mount MK 3 Feeds: Rapid traverse max. 10 m/min Fee ...

Inv. Num. : 8070 Type: Multiturn 3000 Producer: Colchester Created: 2005 Parameters: Control system: FANUC Maximum turning diameter over bed: 460 mm Maximum turning diameter over support: 270 mm Spindle diameter: 78 mm Motor power: 11 kW Maximum spindle speed: 2250 1/min Travel X: 296 mm Travel Z: 1530 mm Equipment: Owner Vacuum

Manufacturer: DMG Type: Sprint 42/10 Linear Year of Make: 2014 Technical data working space Max. travel X-axis: 50 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 120 mm Workpiece Max. workpiece diameter: 42 mm Max. workpiece length: 320 mm Max. bar passage: 42 mm Control: Fanuc Basic functions Sub-spindle Y-axis Accessories Bar Feeder Säneförderer Tool Holder Condition Perfect Availability Immediately after payment Terms and conditions of purchase: no guarantee, no warranty, no return Terms of delivery: Ex-works Terms of payment: 100% prepayment

TRUMPF TruLaser 5030 L68 fiber laser was built in 2017 in Germany by Trumpf GmbH + Co. KG. The machine, designed for precision machining of sheet metal made of structural steel, stainless steel and aluminium, is offered with state-of-the-art components and extensive equipment. These include a resonator with the highest energy efficiency, which generates a stable 3 kW fibre optic beam. The mobile, adaptive lens system located in the universal cutting head ensures optimum beam geometry for different sheet thicknesses and materials, resulting in the highest cutting quality at maximum feeds. In addition, special systems incorporated in the machine allow for the machining of waste material. The laser power is regulated analogously to the feed rate on the advanced SIEMENS SINUMERIK 840D SL CNC control. What’s more, the workshop programming integrated into the control system allows program ...

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL PAA 9001.25 Year of Make: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with power source Kjellberg HiFocus 280i 2 oxyfuel burners propane Beuting vibrating conveyor table Donaldson DFPRO12 filter system for outdoor installation

Specifications: X-axis 1,600 mm Y-axis 700 mm Z-axis 800 mm Spindle power 25 kW Spindle speed 100 – 14,000 rpm. Tool holder HSK 63-A Control: CNC SIEMENS Sinumerik 840D Table dimensions 520 x 700 mm Max. table load 800 kg B-axis 360 A° Weight approx. 17,500 kg

ECKERT SZAFIR BL2 plasma cutting machine was built in 2022 in Poland by Eckert AS Sp. z o.o. The machine, designed for precision cutting sheet metal made of structural steel, stainless steel and aluminium, is distinguished by its large 6 metre long and 2 metre wide sectional work table. The large area of the table makes it possible to efficiently machine a single oversized workpiece or multiple sheets at the same time, guaranteeing a high level of user comfort through the ongoing elimination of contamination. In addition, the portal structure based on a welded steel profile ensures excellent stability of the machine geometry, which does not become unstable under heavy loads. The SZAFIR BL2 plasma cutting machine has worked approximately 867 hours to date. Technical specifications of the ECKERT SZAFIR BL2 plasma cutting machine - CNC controller: ECS 872 - work table dimensions (L x W ...

TRUMPF TruLaser 5030 fiber laser was built in 2015 in Germany by Trumpf GmbH + Co. KG. The machine, which is designed for precision machining of sheet metal made of among others structural steel, copper and aluminium, is characterised by the use of state-of-the-art technical solutions that significantly affect the cutting quality and expand the machine’s machining capabilities. Laser cutting is performed by means of a stable fibre-optic beam with a maximum power of 5 kW, which is flexibly guided from the resonator to the cutting head with an adaptive lens system. This system ensures optimum beam geometry for different sheet thicknesses and materials, resulting in the highest cutting quality, at maximum feed rates. In turn, the laser power is regulated analogously to the feed rate on the intuitive SIEMENS SINUMERIK 840D SL CNC control. The workshop programming integrated into the con ...

BLM-ADIGE JUMBO LT14 tube laser cutting machine was built in 2014 in Italy by BLM S.p.A. The machine’s high versatility and extensive machining capabilities make it the perfect choice for precision machining of tubes, open profiles, I-beams and special profiles of large dimensions. It will significantly reduce the cost of producing a single component and improve the quality of cutting compared to other technologies available on the market. The BLM-ADIGE LT JUMBO 14 3D tube laser cutting machine performs machining fully automatically, without the need for retooling or manual adjustments. Once the workpieces have been fed in, the loading unit with conveyor system segregates them according to cross-section, diameter and length. The workpiece is then moved towards the work area, where it is held by three special spindles that eliminate uncontrolled movements and guarantee more precise,  ...

WE SELL AN STUNNING NICE CONDITION CNC BIGLIA WITH TOOLS AND ACCESSORIESS CONDITION IS AS ALMOST NEW. VERY LITLLE USED. FANUC SERIES 18-T Maximum turning diameter: 520 mm Maximum turning length: 500 mm Bar turning diameter: 80mm X axis travel: 210 + 5 Z axis travel: 500 + 10 Spindle speed: 4000 rpm Spindle motor: 11-15 Kw (50%) Spindle connection: ASA 6 Spindle hole: 80 mm Self-centering diameter: 250 mm Turret: number 12 stations Tailstock: CM 4 Dimensions: 3500 x 1670 x 1650 mm Weight: 4600 Kg HOLE TROUGH SPINDLE: 82 mm YEAR:1997

Year of manufacture 2001 Heidenhain TNC 310 Travel distances 350 x 240 x 340 Spindle speed 20 - 5000 Drive power 6.3/10 KW Total connected load 15 kW Tool holder SK40 Accessories: el. Handwheel Universal swivel rotary table 400 x 280 mm, Rotation range 360°, swivel range +105/-15° with electronic angle display Coolant Setup

ZINSER 2425-I plasma cutting machine was built in 2013 in Germany by ZINSER GmbH. The machine, which is designed for precision cutting, marking and bevel cutting of tubes and sheet metal, has AC servo drives with precision planetary gears that guarantee excellent handling characteristics at high speeds and rapid direction changes. For the machining process, plasma or oxy-fuel torches are used, which move along the large work table on two linear guides. A sturdy portal structure with an efficient filtration system further eliminates any contamination, leaving the work area safe and comfortable. All this is complemented by a state-of-the-art CNC control with touchscreen. The ZINSER 2425 plasma cutting machine weighs 1325 kg. Technical parameters of the ZINSER 2425-I plasma cutting machine - CNC controller: ZINSER CNC 5010 - input power: 4000 W - maximum workpiece thickness: 200 mm - ...

CORMAK LF3015LNR laser cutting machine was built in 2021 by the Polish company CORMAK. The machine, which is designed for precision cutting of tubes, sheets and profiles, uses advanced FIBER technology to machine even the hardest materials of various thicknesses. This technology is a much more cost-effective alternative to CO2 machines of similar power, while also guaranteeing low operating costs and trouble-free operation for many years of use. The workpieces are machined with a reliable RAYTOOLS cutting head with autofocus and protective glass. It moves along a sliding gantry made of aircraft aluminium. The installed software automatically adjusts the focus lens from -10 mm to +10 mm, ten times faster than standard manual adjustment. Both the collimator lens and the focus lens are equipped with a heatsink to reduce the temperature of the cutting head and thus extend its service life ...

Key data: 400 mm, 1000 mm

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2001 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW - Power DC motor Z-axis: 6.8 Nm - Power DC motor X-axis: 3.4 Nm - Motor pump power: 0.57 ...

max. turning diameter 500 mm max. turning length 1400 mm 12-station turret not driven

Key data: 300 mm, 570 mm, 5000 1/min

Machine Details Stock-No. 1105-04044 Type of machine CNC Lathe Make MAZAK Type QT NEXUS 200 Year of manufacture 2009 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis ex work Technical details turning diameter 350 mm turning length 575 mm Diameter bar 76 mm swing dia. 475 mm control Mazatrol Fusion 640 T X-Axis 190 mm Z-AXIS 570 mm total power requirement 26/22 kW weight of the machine approx. 5 t dimensions of the machine approx. 3.4 x 1.8 x 1.9 m Additional information mazatrol fusion 640 t 2 AXIS tool eyes chip convoyer tailstock

CNC lathe Daewoo Lynx 200 B CNC Fanuc 21t, 10 tool turret tailstock, bar feeder The machine can be seen under power in our warehouse (M i m u)

Key data: 600 mm, 525 mm, 500 mm

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial.no.063 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Key data: 710 mm, 520 mm, 520 mm

TECHNICAL DETAILS X-axis travel:710 mm Y-axis travel:520 mm Z-axis travel:520 mm Rapid traverse X-axis:30 m/min Y-axis rapid traverse:30 m/min Rapid traverse Z-axis:30 m/min X-axis feed speed:10 m/min Y-axis feed speed:10 m/min Z-axis feed speed:10 m/min Overall height:3,300 mm Overall length:4,600 mm Overall width:5,500 mm Total weight:6,000 kg Spindle speed (min.):20 rpm Spindle speed (max.):12,000 rpm Spindle motor power:25,000 W Input voltage:400 V Type of input current:three-phase Work table length:700 mm Worktable width:500 mm

Key data: 1200 mm, 600 mm, 500 mm

Dialog 11 Control Travels 1200 x 600 x 500 Max. spindle speeds 5000/rpm Spindle drive 12 kW Tool holder SK40 Quill stroke 80 mm, weight approx. 7000 kg. Accessories el. Handwheel, coolant device. The machine is in very good condition.

Key data: 2500 mm, 1600 mm, 1000 mm

Stock number: 3949 CNC BED MILLING MACHINE Manufacturer: SORALUSE, Type: TL-25 Machine NO.: 101016, Year of manufacture: 1998 Specifications: Table size 2860 x 1000 mm Large table load 7500 kg Longitudinal movement (X) 2500 mm Transverse movement (Z) 1000 mm Vertical movement (Y) 1600 mm Spindle Taper 50 ISO Stepless spindle speeds 20-3000 rpm Spindle motor power 22 Kw Total power 38 kW Tool changer 30 stations Control Heidenhain TNC 426/430 CB Fabr. Controlled vertical head 2.5 degrees Spindle Hours 12272 Hours Rapid traverse 15 m/min Accessories: Cooling by spindle Chip conveyance. Cooling water system. Electronic handwheel Line measuring system Various accessories. Length: 9500 mm, Height: 3820 mm, Width: , Weight: Approx 25.000 kg

Stock number: 3951 PROCESSING Manufacturer: Haas, Type: VF-6B/40HE Machines NO.: 29222, Year of manufacture: 2002 Specifications: Table size 1626x711 mm Longitudinal movement (X) 1650 mm Transverse movement (Y) 800 mm Vertical movement (Z) 762 mm Spindle cone ISO 40 Spindle speeds 10000 rpm Controlled in axes 3 Operating hours spindle 17652 hours Accessories: Cooling by spindle Chip conveyance. Tool Measuring Length: 4000mm, Height: 3150mm, Width: 3000mm, Weight: 9800 kg

Key data: 330 mm, 730 mm, 3500 1/min

Stock number: 3953 CNC LATHE Manufacturer: DOOSAN, Type: S390 LM Aircraft NO.: LNV-1019, Year of manufacture: 2001 Specifications: Max. circumferential diameter 330 mm dia. Turning length 730 mm Turning over planing slide 580 mm dia. Main motor power 22 kw Main spindle speed range 3500 rpm Hole through drawing tube 77 mm dia. X axis movement 245 mm Z ash movement 750 mm Tool turret with 12 stations Powered stations revolver 1 12 pieces. Total power consumption 40 kva Control Fanuc 18I Fabr. Spindle operating hours 9482 hours Accessories: Hydr. Chuck main spindle 300 mm dia Chip conveyance. Tailstock Length: 6550 mm, Height: 2200 mm, Width: 2200 mm, Weight: 5000 kg

Inv. Num. : 8139 Type: QTN-200M Producer: MAZAK Created: 2005 Parameters: Control system: Mazatrol Fusion 640 T Nexus Maximum turning length: 538 mm Maximum turning diameter: 210 mm Maximum Spindle Speed: 35-5000 1/min Tool magazine: 12 pieces Maximum length of travel in the X-axis: 230 mm Maximum feed in the Z-axis: 575 mm Number of axes: 3 pieces Chuck Size: 8 (Kitagawa BB208) Power consumption: 37 kW Length: 2485 mm Width: 1780 mm Height: 1840 mm Weight: 4380 kg

Key data: 350 mm, 1250 mm, 2500 1/min

Stock number: 3954 CNC LATHE Manufacturer: Dainichi, Type: F35 - 1250 Machines NO.: 24350 , Year of manufacture: 1990 Specifications: Max. circumferential diameter 350 mm dia. Max. turn. About Bed 550 mm Dia. Turning length 1250 mm Turning over planing slides 400 mm dia. Main motor power 22 kw Main spindle speed range 25-2500 rpm Spindle bore 90 mm dia. Tool turret with 12 stations Accessories: Hydr. Chuck main spindle mm dia Various tool holders. Chip conveyance. Length: 3750 mm, Height: 1800 mm, Width: 1700 mm, Weight: 6500 kg

Key data: 420 mm, 1538 mm, 3300 1/min

Stock number: 3962 CNC LATHE Manufacturer: MAZAK, Type: QTN 350 MY NEXUS Machines NO.: 202640, Year of manufacture: 2008 Specifications: Max. circumferential diameter 420 mm dia. Max. turn. About bed 700 mm DIA. Turning length 1538 mm Main motor power 30 kw Main spindle speed range 3300 rpm Spindle bore 102 mm dia. C axis - head spindle movement 0.001 degrees Z Ash Movement 1607 mm Y axis 150 mm Tool turret with 12 stations Powered stations revolver 1 12 pieces. Motor Power Driving Tools 7.5 Kw Powered tools. 4500 rpm Controlled in X-Z-C-Y axes Accessories: Hydr. Chuck main spindle 300 mm dia Driving angle tools 2 pieces Driving Tools Straight 2 pcs. Various tool holders. Tool setter Chip conveyance. Delivery time: Feb. 2025 Length: 4300 mm, Height: 2400 mm, Width: 2600 mm, Weight: 8 ...

CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 590 Turning length mm: 510 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp Tool measuring arm High pressure pump Workarea light 4th axis Interface for Bar feeder Rated power kVA Working time hours Under power: 7456 Spnidle: 5423 Basic machine dimensions / weight Length mm: 3495 Width mm: 2050 Height mm: 2230 Weight kg: 5800

Lid FP2A from vocational training center freshly serviced in top condition x-travel 300 mm y-travel 300 mm z-travel 400 mm Spindle holder ISO 40 Spindle speeds 40 - 3150 rpm Table size 620 x 390 mm Feeds infinitely variable 4 - 4000 mm/min CNC control Dialog4 (software update) Table load 0.45 t Total power requirement kW Machine weight approx. 1.6 t Operating voltage 380 V Footprint 1.9 x 2.0 mm Control cabinet 1.90 x 0.75 x 1.05 m Dimensions approx. 2.9 x 2.7 x 2.0 m

Key data: 420 mm, 1524 mm, 3300 1/min

Stock number: 3963 CNC LATHE Manufacturer: MAZAK, Type: INTEGREX 400 III-S Machine NO.: 173882, Year of manufacture: 2005 Specifications: Max. circumferential diameter 420 mm dia. Max. turn. About Bed 850 mm Dia. Turning length 1524 mm Main motor power 30 kw Main spindle speed range 3300 rpm Drilling through drawing tube 102 mm dia. C axis - head spindle movement 0.001 degrees Y axis +/- 115 mm B Axis Movement -30/+195 degrees B axis spindle speed 12000 rpm B axis spindle effect 18.5 B axis tool system Capto C6 Sub-spindle C axis - counter pindle movement 0.001 degrees Engine power sub-spindle 26/22 Kw Total Power Consumption 99.9 kva Control Mazatrol 640 Fabr. Spindle Hours 7167 Hours Controlled in 6 Axes Accessories: ATC Tool magazine with 40 stations Hydr. Chuck main spindle 300 mm dia Hydr. Chuck Subspindle 300 mm dia  ...

equipped with Iemca Boss 332E-r/32 new in 2007 - Fanuc 18i-TB control - chip conveyor - machinery still in production will arrive in our stock at the end of January.

FANUC O1 Machine length : 1350 mm Machine width : 2760 mm Machine height : 2615 mm Machine weight : 3500 kg Control unit: Enac-I Spindle speed range : 10000 1/min Spindle motor power : 7.5 kW X-axis travel : 500 mm Y-axis travel : 400 + 210 mm Travel of the Z-axis : 300 + 80 mm Maximum table load: 500 kg Table dimensions: 700 mm x 400 mm

gebr. CNC Long Short Turning/Milling Center with B-Axis Hours: 7200 Control: Fanuc 31i-A Processing length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Bar passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power sub-spindle: 2.2 kW Main spindle speed: 10,000 rpm Sub-spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear beams: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110x1,200x1,885 Weight: 3,300 kg Conversion from longitudinal to short turning Deep Hole Drilling Stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross Drilling Rear Conveyor Fire extinguishing system FMB Bar Feeder Minimag 20, YOC 2012 The machine can be viewed under power by arrangement. Changes and errors in the technical data and informa ...

Stock number: 3975 PROCESSING Manufacturer: CHEVALIER, Type: 2040 VMC Machine NO.: MC925B02, Year of manufacture: 2003 Specifications: Table size 1200 x 450 mm Longitudinal movement (X) 1020 mm Transverse movement (Y) 500 mm Vertical movement (Z) 500 mm Spindle Taper 40 ISO Stepless spindle speeds 8000 rpm Spindle motor 7.5 Kw Total power 15 KVA Tool changer 20 places Control Fanuc 0M Fabr. Operating hours spindle 4032 hours Length: 2350 mm, Height: 2650 mm, Width: 2750 mm, Weight: 5800 kg

Specifications: first-class condition, only approx. 9000 operating hours Fanuc, High Performance CNC Control Series 31i-B5, 3-channel control, 3 turrets, 12 CNC axes, (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3), Rapid traverse speed 30 mm/min, Rod diameter max. 38 mm, Turning length max. 350 mm, Main spindle, speed max. 7,000 rpm, C-axis 0.001 degrees, Main spindle drive power 11 kW Sub-spindle speed max. 7,000 rpm, C-axis 0.001 degrees, Sub-spindle drive power 7.5 kW Turret speed max. 5,700 rpm, (with appropriate tool holder also higher) Turret drive power 4 kW Tool holder stations for a total of 30 (10 per turret) (prepared for internally cooled tools) Tool holder set, (non-driven) Guide bush unit (pull system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit) type Müller combistream CS 3 Coolant use: Oil Weight: 6.25 tons Dimensions: ( ...

Year of Build 2003 (0450) FANUC 16i-T control with 9 axes, 9 axes (X/C1/Y/E/B/A/X/c2), Rod Ø max. 13 mm Turning length max. 205 mm, Main spindle, speed max. 12,000 rpm, C-axis, Sub-spindle with collet, speed max. 12,000 rpm, C-axis, 4-fold tool holder 3 cross drilling rigs 8-station turret various additional tool holders, quills, Fire extinguishing system Kraft und Bauer Parts Conveyor Belt Manuals Operation/Programming/Electrics/Spare Parts Operating Tool Machine Up to 29 turning tools and up to 19 operated tools Tools possible 9.0KVA Fuel tank capacity 170L Charging magazine FMB Turbo 2-16 /3200/A / from Ø2- Ø20 mm / Coolant Insert of Machine: Oil Machine dimensions: approx. 2700 x 1400 x 1700 [mm] Machine weight: approx. 1700 [kg] Dimensions loading magazine: approx. 4300 x 600 x 1800 [mm] Weight loading magazine: approx. 700 [kg] Dimensions of the perip ...