129,816 used machines on RESALE, but how to find them? Machine Search
High-quality construction The drive roller is convex (this automatically centers the abrasive belt in the middle of the roller), fully vulcanized for longest service life and best running smoothness, Tool-free and therefore quick, uncomplicated change of the sanding belt, infinitely variable height adjustment for optimal setup of the belt sander to the user, freely adjustable metal stop for optimal and safe guidance of workpieces when using the large surface grinding area, Optimized belt speed in terms of design, so that burning of the workpiece during machining can be excluded as far as possible, Motor protection switch with CEE collar plug incl. phase changer, 5-year warranty on the engine Strip length 2000 mm Belt width 75 mm Surface grinding range 600 mm Belt speed 30 m/s Colour RAL 9007 Three-phase motor 400 V 3.0/3.75 kW Machine dimensions (W x D x H) 1100 x 550 x ...
Full salad washing line 2 x Washing units, destoning, infeed conveyring, vibros, all electric panels Removed working and have wiring information as was installed and decommissioned by same engineers. Please message for more photographs
-Stop and mixer Boku -Model: RS 40 CS -with digital control -with 1 stainless steel boiler -with 2 whisks
The offered enrobing machine is in very good condition. It is currently still in use and can be viewed on site. Further information is available on request. The pressing machine that can be seen at the end of the production chain is not part of this offer, but is also for sale (see our other listings).
Control Rexroth System 200 BTV30 Circulation diameter over bed: 160 mm Circulation diameter over face carriage 250 mm Chuck diameter 160 mm Turning length 300 mm Spindle speed 8000 min-1 12-speed revolver with attached Competition. Workpiece conveyor belt Conveyor Various tool holders
Spreading trailer Schmidt pre-wetted salt, up to 24 m spreading width Trailer with Aebi-Schmidt "Stratos" spreader body, solids and brine tanks. Contents: grit 5 m³, liquids, e.g. brine: 5,200 ltr. Spreading width: 6-24 m in increments of 1 m Propulsion: Diesel engine Hatz 3M41 Operating control by remote control including remote engine start/stop and engine monitoring. Curb weight 6,500 kg, gross vehicle weight 20,000 kg, tyres 425/65R22.5 164J, Nato towing eye 76 mm! Built in 2002. Hardly used, min. corrosion, accident-free. Operating manuals with spare parts lists completely available. More winter service equipment in stock - see sample photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, ...
for all light/dark leftovers etc. "the bio-universal shredder" Model: BG2 Stainless steel Capacity hrs./ 600 kg dry Sieve 5 mm (included) Connection 400V, 5.5 kW, 32A-CEE plug Dimensions: 720 x 690 x 1580 mm, WxDxH Ejection Height 470 New device 12 months warranty More TOP bakery machines in stock!
used
Make : Tetra Pak / FBF Model : 500 Capacity : 500 litres per hour stages : 2 Bar : 250 Location : Dairy Machinery UK Condition : Good
Ham press Erhard approx. 120 liters capacity, completely in stainless steel, compressed air operated, with intermediate boards and stainless steel brackets, Dimensions LxWxH approx. 107x59x99cm, weight approx. 180kg, good used condition, works perfectly
Manufacturer | manufacturer: Hesta Machine Type | machine type: HM 501 Stations | stations: Single Station | Single station Year of construction | Built: 1993 Location | location: UES Clamping force | Clamping force: 40 kN Control Type | control system: Original Hesta Extruder | Extruder: 50/22D Extrusion Head | Extrusion Head: 2-fold head 100mm | Double head 100mm Mold dimensions mm | mold dimensions mm (A length / length x B Breite / width x C Tief/depth): Bottle Volume Max. | bottle volume max.: 2 L Screen Language | monitor language: German / English | German / English Delivery Time | Delivery time: 1 - 3 weeks | 1 - 3 weeks
Foil stamping - embossing Make PB&E Model Comet Year 1980 Size of the plate 150 x 200 mm Foil transport Automatic by pneumatic arm Condition machine can be purchased refurbished or "as-is" Details automatic foil transport (adjustable foil pull) adjustable embossing time, automatic table movement Available Direct
Used machine for the application and sealing of shrink sleeve labels. Manufacturer PDC Europe SAS. New 2007. The machine consists of: 1. shrink sleeve label applicator PDC100BEM , 2.5 kW. The sleeve applicator is an automatic unit designed to apply neutral or printed PVC and/or PET sleeves. The process of making and setting the sleevs takes place in five working zones: The spool is supported and unwound up to the opening tetrahedron, The roll of sleev is opened and then directed to the cutting zone where it is cut to length. The sleeve is moved from the cutting zone to the ejector by means of a feeder. The product to be labelled is fed underneath the ejector, positioned underneath it precisely and moved on. The Sleeve is placed on the product using the ejector. Estimated weight of applicator: approx. 300 kg. 2. heating tunnel TAR1500-III for heat-shrinkable labels. Output 19 ...
Makro 6 Station Auto Change Self Adhesive Labeler Model: Mak-5 24P UA6 L3 C03 With Optical Bottle Positioning System Available Immediately Year 2018 Low hours
⦁ Station No. 1 Charger for cardboard packaging with packaging remover from the charger ⦁ Station No. 2 Box former ⦁ Station No. 3 Station for inserting products ⦁ Station No. 4 System of closing boxes with sticky hot glue ⦁ Station No. 5 Closing the box ⦁ Station No. 6 Exit conveyor -The system of closing the box with hot glue is carried out using the device of the Italian manufacturer "Preo".
Key data: 8 mm, 1
Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...
Multivac R 230, year of manufacture 2001, film width 355 mm, draw-off length 210 mm, free loading section of 1,6 m, MC96II control with LCD monitor, 10 mm side trim, two cross-cut guillotines, height-adjustable discharge conveyor, central chain lubrication, new servo inverter for chain feed, Vario tool with interchangeable formats. Format: 1.1 . 335 mm x 210 mm 2.1 - 167.5 mm x 210 mm 2.2 - 167.5 mm x 105 mm 3.1 - 111.66 mm x 210 mm Total length of the machine 5,15 m Operational and wear parts replaced.
Key data: 299 mm, 620 mm, 150 mm
Technical data of the machine: - Workpiece headstock: MK5 - Tailstock: MK3 - Center height: 150 mm - Center width: 680 mm - Grinding length: 620 mm - Grinding wheel left: 350 x 50 x 127 - Grinding wheel right: 250 x 25 x 127 . Geometry: The machine is completely dismantled up to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the Z and X axes are scraped by hand and restored to a like-new condition. After completion, the machine receives a measurement report according to the manufacturer's specifications Equipment of the machine (standard): • 1 workpiece headstock MK5, swivel • 1 tailstock MK3 • 2 grinding wheel holders • 1 abrasive headstock Ø 127, swivel • 1 hydraulic power unit • 1 set of operating tools and instruction manual The machine and equipment shown in this il ...
Key data: 1350 mm, 3
SPECIFICATIONS: Working width mm: 1350 Sanding belt dimensions mm: 2620 x 1300 Configuration: I. Iron roller diameter 300 mm II. Hard rubber roller diameter 300 mm - hardness 80 shore III. Scotch Brite Brush Unit 02 Motors + power regulator KW 30 / KW 22 / KW 2,2 Complete with motorized conveyor belt mm: 3500 x 1300
large working width: 2520 mm for sheets up to: 1.5 mm Upper beam opening width: 180 mm Adjustability bending beam: 40 mm Bending angle adjustment: 135° Weight: 1970 kg Dimensions: 1970 x 750 x 1250 mm
The machine is designed for automatic gluing of various types frames and profiles covered with foil, varnished or otherwise finished in the shape of rectangular or polygonal. The material of MDF frames glued together. The machine is dedicated to the production of picture frames and finishing frames in doors. Fully automatic work cycle. Max. slat size: -width 120 mm -height 65 mm -minimum element length 250 mm -capacity about 100 sets. Frames The device is suitable for hot melt adhesive. The dimensions of the device are 1100 x 850 x 1300 mm. Weight 160 kg Pneumatic system 6 bar.
Infinitely adjustable cutting thickness from approx. 0 to 42mm, max. approx. 160 cuts/minute. Push-button operation, voltage 400 V / 3.0 kW, chamber length 200 x 240 x 700 mm, 1 toothed knife ready for use. Infinitely adjustable cutting thickness from approx. 0 to 42 mm, approx. 160 cuts/per minute Push button operation, voltage 400 V / 3.0 kW, chamber length 200 x 230 x 700 mm, 1 toothed knife working condition.
Mayfran coolant system with Knoll high-pressure pump for internal cooling Scraper Belt Chip Conveyor Mayfran Bar loading magazine 3 m Equipment: 1 x Sawing unit 6 x Feed unit 1 x Turning unit 1 x Grooving Unit 1 x Thread Rolling Unit 16 x Collet SW36 1 x Saw and Turning Bushing SW36 1 x conversion kit of the turning unit up to SW41 1 x Control Pin Turning Station Unit 8 2 x Hydraulic Drill Head 3 x Angle Milling Head
Brezel-Verlängerung, funktionstüchtig
Automatic hardcover counter strainer equipped with: • Automatic Cover Feeding • Automatic carton feeder from 1 to 5 pieces • With servo motors and 3 photoelectric sensors for the registration of the sheet on the side and diagonal cardboard • Automatic viscometer • Touch screen for convenient and quick adjustment of the machine It allows cardboard lining with window and cardboard lining with some irregular shapes (such as some non-straight side). Maximum format size of 900 x 460 mm
Banding machine BVM 16040 L; good condition; Welding width 1600mm; Product height 400mm; product scanner; Labeller; Conveyor belt 5600mm; Intermediate belt 1500mm; Shrink tunnel SC 16060 SD; Link band; cooling fans; Outlet roller conveyor 2000mm. Banderoling machine BVM 16040 L; good condition; sealing width 1600mm; product hight 400mm; scanner; Labeler; infeed belt 5600mm; intermediate belt 1500mm; shrink tunnel SC 16060 SD; link belt; cooling unit; Outfeed Roller Conveyor.
MAX DIAM 500, MAX MODUL 8 , MAX STROCE 125 , SINUMERIC 840 D
Heidenhain TNC 124 Year of construction 1996 Spindle holder ISO 40 Travel 310 x 170 x 340 mm 16 spindle speeds from 40 - 2500 rpm Infinitely variable feeds Weight approx. 700 kg
MOM ST22 Liquid filler Stainless liquid filler, mounted on load cell with roller conveyor, Precia Molen digital controls for weighing, height adjustable frame,
WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...
Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T
Key data: 420 mm, 250 mm, 350 mm
with Heidenhain TNC 114 digital display Tool holder ISO 40/M16 Travel X/Y/Z 420 x 250 x 350 m 12 spindle speeds from 50 - 2240 Weight approx. 900 kg Central lubrication Bellows NEW! Accuracy in: X-axis 0.005/300 mm Y-axis 0.006/250 mm Z-axis 0.01/300 mm Spindle concentricity 0.003 mm Angular accuracy 0.01/250 Spindle clearance X 0.12, Y 0.04, Spindle noise: very good Very good overall condition!
Used blister and cartoner by IMA type. C80/A81; New: 2000; Available formats: 1.PVC/ Al thermoformed dim. blister 83x56 with 10 tablets, cardboard box …601886, 602586, 603586 604586, Foil 176/183 2. Thermoformed PVC/Al dim. blister 83x56 with 6 tablets 3.PVC/Al thermoformed dim. blister 96x66 with 10 tablets cardboard box …7018104, 7025104, 7035104, 7045104, 7058104, Film 209/213
Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slab Miller Strip width: 30” – 762 mm Cutter Speed: 500 rpm Metal speed: 18 fpm (1.9 m/min.)) Capacity: min. ¼” max. 1-1/4” Thickness Entry thickness range: 13 – 20 mm
OKUNO MSC-15 spring coiling machine was manufactured in 1998 in Japan by OKUNO Machine Co. The machine designed for the efficient production of springs from wire with a maximum thickness of 0.3 mm, consists of a wire spool rack with a braking system, a heating device for annealing and a forming machine. The wire processing process begins with taking material from a spool mounted on the machine stand, which is then fed into the heating device to anneal both ends of the spool. The pre-treated material is then fed further into the forming machine, where it is shaped into a spring by automatic cutting and bending. The length of wire feed is regulated by a digital indicator located on the machine frame. Technical data of the OKUNO MSC-15 spring coiling machine - maximum wire feeding length: 10m ± 5 mm - thickness of material: 0.15 – 0.3 mm - material width: 5.0 – 15.0 mm - maxi ...
Used packaging machine by Multivac type R 245. New 2010. Packaging machine: - produces vacuum and aerated packaging from deep-drawn and sealable bottom soft or thick film, combined with sealable top film. - has two packaging formats : 250g cube with pack size 145x92.25x approx. 40 mm 500÷600g cube with pack size 188.5x145x approx. 40 mm Power supply 400 V / 50 HZ 3/PE AC phases Rated power 15 kW Nominal current 39 A Max. precharge 50 A
Etis System 4 Labeler KBA Printer Top Bottom Applizer Etis System 4 Labeler with KBA printing system - several in stock
Herma Labeler 452 MS with Graseby Allen Pressure Unit Perfect for e-cigarettes / lipstick etc
WEINIG Rondamat R 934 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment: Net cash register be ...
WEINIG Rondamat R 934 S/N 934-733, YOC 1996 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment ...
Stock number: 3845 CNC BED MILLING MACHINE Manufacturer: CME , Type: MB-3000 FLEX Reconditioned spindle Year of construction: 2006 Specifications: Spindle speeds 2200 rpm Boring Spindle dia. 150 mm
Nv. Num. : 7150 Type: ALLROUNDER 275 V 250 Producer: ARBURG Generated: Parameters: Clamping force: 250 kN Height of clamping plate: 150-250 mm Ejector stroke length: 225 mm Opening the mold: 375-475 mm
Handtmann VF 608 Plus, vacuum filling machine for filling, portioning, linking, with servo drive, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g., MC control (colour), 10243 operating hours, refurbished condition.
Hackeranlage Rudnick Enners 650/200 Motor 37kw vibrorinen Metaldetector kratzforder Containerbefillen
Vacuum filling machine Vemag Robby Type 136 Filling, portioning, linking PC-Control AC Servo drive Including linking device Filling performance: depending on the goods up to 2700 kg/h Portioning weight: 5-60000 g - variable adjustable in steps from 0.1 g or 1 g Portioning speed: up to 650 portions per min (depeding on product, casing and portioning size) Speed of rotation: 0-100%, variable adjustable Linking: 0-10, variable adjustable
Vacuum filling machine Vemag Robby 2 Type 135 Filling, portioning, linking PC-Control Including loading device for 200 ltr. bins Including linking device Filling performance: depending on the goods up to 3000 kg/h Portioning weight: 5-60000 g - variable adjustable in steps from 0.1 g or 1 g Portioning speed: up to 650 portions per min (depeding on product, casing and portioning size) Speed of rotation: 0-100%, variable adjustable Linking: 0-10, variable adjustable
Frey Kompakta 2-30 piston filler, straight filling, portioning, linking, suitable for all types of sausages, casing holding device optially available, 30 liters filling cylinder, LCD3 control with TFT color display, memory for 100 filling programs, portioning speed up to 250 portions/min, portioning range 5 - 10,000 g, fill level indicator, piece counter, count-based auto stop.
Maja Skinny II, skining and derinding machine, CE-conform execution, year 2019, power supply: 3 Ph, 400 V, 50 Hz, 2.0 A, 0.75 kW, cutting width 434 mm, with infeed conveyor, net weight approx. 190 kg, refurbished condition
maximum number of results exceeded
please refine your search
