cnc drilling machines used for sale

Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer 4JE-13Y-40P -Kaeltepower: 60 kW at -10ºC/40ºC, 26 kW at -25ºC/40ºC -Volume: 3 x 63.5 m3/h -Quantity in stock: 1 piece -Kealtemittel: R134 -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2820 rpm at 50 Hz -Motor: 2.2 kW 5800 rpm at 100 Hz -Voltage: 380 V -Shaft mounting: Ø 30 mm -Weight: 15 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1.85 kW at 17570 rpm at 300 Hz -Voltage: 165 V -Receptacle: Shaft collet -Number: 8 motors available -Price: per piece -Dimensions: 350/75/H160 mm -Weight: 12 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.6 kW 17350 rpm at 300 Hz -Voltage: 165 volts -Shaft mounting: Ø 16 mm L 10 mm -Number: 4x motors available -Price: per piece -Dimensions: 280/60/H140 mm -Weight: 4 kg

Tensile testing machine Manufacturer: Karl Frank GmbH Type: 81559 Year of construction: 1980 Duck test: height: 1000mm, width: 400mm, depth ungraenzt Force ranges: 2000N, 1000N, 500N, 200N, 100N, 50N Original price at that time: 49.855,00 DM ATTENTION: The device has not been tested for functionality. All information without guarantee

Book Back Rounding Machine Machine No.: 520

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm L 25 mm -Weight: 3 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.23 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 15 mm L 25 mm -Number: 5x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 2 kg

Rated power at 50%ED: 35kVA Short circuit current: 19kA Electrode force: 300daN / single stroke Projection: 395mm --- Welding control: WS 708 (7 times, 8 program) --- Incl. additional options: - Foot switch - Pressure-free lowering of the upper fitting - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.23 kW -Speed: 18000 rpm at 300 Hz -Dimensions: 210/70/H100 mm -Weight: 2 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.6 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 16 mm L 10 mm -Number: 2x motors available -Price: per piece -Weight: 3.3 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 17300 rpm at 300 Hz -Shaft mounting: Collet Ø 12 mm -Dimensions: 340 x 110 x H150 mm -Weight: 10 kg

PALLETIZER KRONES ALONG WITH THE CONVEYORS AS SHOWN IN THE DRAWING ATTACHED Palletizer KRONES PRESS UNI, production year 2007. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, • Divider, • Packs turner Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors

specifications: - Pressure capacity 100 KN / 10 t - Compressive force adjustable 0 - 100 kN - Stroke length 0 - 150 mm - Clear width approx. 200 mm - Lifting speed 0 - 0.6 m/min - Tool height up to approx. 100 mm - Bending performance - with prism MW 100 flat to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Directional power Wy at straightening block distance of 1m 100 cm³ - Drive 400 V / 1.1 kW - Space requirement approx. W 1100 x H 1000 x D 650 mm - Weight approx. 400 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Saw: max. Ø 150 mm -Motor: mounted on guides -Travel distance: 320/100 mm -Dimensions: 550/250/H330 mm -Weight: 17 kg

Veneer joining machine with pneumatic voltage Cutting length 3m L x W x H: 3.5 x 1.2 x 1.7 m Year of construction 1996 Weight approx. 550 kg The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Max Size 520 x 850 mm Min size 100 x 120 mm 4 Buckles Noise hoods High speed feeder head Digital counter with program 1 Electronic knife Hook on shingle belt delivery Implant machine Very good conditions

We sell a pietroberto fork kneader. The machine is ideal for flatbread doughs. Used and overhauled / Warranty

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 6.3 kW 5800 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 540/260/H150 mm -Weight: 43 kg

- Make: Copper mill - Type: Vuin-plus 600 - Year of construction: 1991 - Working width: 600 mm - Working height: 250 mm - Working height 4-sided: 200mm (up to 250 mm possible) - Number of working shafts: 5 (+2 chamfer units at the top) - Wave arrangement: bottom-up-right+left-down - Lower and upper knife shaft with 4-reversible Leitz Sinus knives - Right and left planer head with 4 reversible blades - Lower fifth shaft for saw blades, profiles, plaster shaft, etc. - Spindle diameter: X-X-40-40-40 mm - Motor power(s): 11-15-11-11-11 kW - Chamfer motors top: 2 x 1.85 KW - Feed speeds: 4-30 m/min - Feed motor: 4 kW - Driven rollers in the table: 3 - Top feed rollers: 4 - Pull-out transport rollers: 2 - Table height constant: approx. 900 mm - Weight: approx. 3800 kg

Control Siemens Sinumerik 828D Speed [rpm] 12000 Travel X/Y/Z [mm] 900/460/520 Tool pick-up BT40 General: Control system Sinumerik 828D X/Y/Z travel 900/460/520 mm Speed 12,000 rpm Tool holder BT40 Spindle: Belt spindle technology Speed 12,000 rpm Power 18 kW Torque 117 Nm Rapid traverse X/Y/Z 36/36/30 m/min Tool holder BT40 Tool magazine: Technology Chain Magazine (ATC TYPE) Number of stations 30 pieces Work table: Clamping area 1050 x 460 mm Table load 600kg Equipment / Accessories: Chip disposal chip conveyor Coolant supply IKZ plant Setup operation Electronic handwheel Miscellaneous Rinsing gun

Fully Automatic Bread Slicing Machine Manufacturer: TREIF Type: DISKUS – SB Technical data: Round knife cutting bread slicer Oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm Automatic bread gripper suitable for all types of bread with bread rack for bagging with sight glass cover for optimum safety during the cutting process Easy cleaning without having to move the machine 400 volts / 0.9 kW / 10 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg Mobile on 4 pulleys with 2 brakes Year of Make: 2010 Function checked, machine is thoroughly cleaned and ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

SODICK AQ325L wire EDM was built in 2002 in Japan by Sodick Co., Ltd. The machine, distinguished by its exceptional precision and reliability, is an excellent choice for the production of parts with complex geometries, i.e. dies, punches and tools. The electrical erosion technology used in the machining process enables difficult shapes to be achieved in even the hardest materials. This method also minimises or completely eliminates the need for other secondary processes, such as polishing. The SODICK AQ325L is designed for machining workpieces with a maximum weight of 450 kg. The machining process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.30 mm. The workhead moves in five axes X,Y,Z,U,V with feeds of 350 mm, 250 mm, 220 mm, 80 mm and 80 mm respectively. The use of a dielectric increases the surface quality and dimensional accuracy of the w ...

Key data: 8 , 600 , 230

High-performance industrial planing machine In good condition, lots of accessories '

Dowson bread slicer Model: B51C Fully automatic bread slicer, Constructed to handle a variety of loaves, up to 100 loaves per minute, comes with two different cutting heads, overall length 2800mm, 3Ph

Reference ID PP-57928 Category Flatbed Die Cutter Manufacturer Gietz Model FSA 790 EFF Year Built 2001 Color - Impression - Working Hours - Speed 5,500 sheets/h Max. size 790 x 560mm Min. Size 297 x 210mm Condition Good Location Europe Availability Immediately Machine Description hot foil stamping and cuting MABEG feeder Transverse foil: 2 axes Longitudinal foil: 3 axes Foil printing option: 2× honeycomb Die-cutting option: Included (die-cutting tool added) Hologram unit: Electronics renewed in 2020 Heating system: 6 heating zones Maximum sheet size: 790 x 560mm Minimum sheet size: 297 x 210mm Maximum stamping area: 720 x 520mm Speed up to 5,500/ hr

Lamination Machine

Key data: 660 mm, 3000 mm, 440 mm

Sine 330/3000 D Well-maintained conventional lathe without mounted lathe chuck but with standard accessories The construction follows the classic design however, is based on a heavy, one-piece cast machine bed. How in the case of heavy lathes here, too, the adhesion between the engine and spindle via a manual Multi-plate clutch. With integrated Features such as the removable bed bridge, rapid traverse and a Taper turning device. WORKSPACE Workpiece length 3000 mm Turning diameter over bed 660 mm Circumferential Ø over support 440 mm Turning diameter without bridge 900 mm Bridge length 320 mm Bed width 400 mm TRAVELS X-axis travel 368 mm Travel Z1 axis 230 mm Swivel range upper slide 45° MAIN SPINDLE Spindle speed 25 1/min - 1600 1/min Spindle bore 105 mm Spindle holder D1-8 RUSH COURSE Rapid traverse X-axis 2000 mm/min Rapid traverse Z-axis 4000 mm/min ...

Motor output: , kW automatic: , Table dimensions: , mm ! Please notice the VIDEO of this unit ! For window producers we recommend a spinde with 40 mm diameter and 160 mm usable length, Tools should have inside diameter of 110 to 120 mm Attached the description with options as pdf-file. Price list on request! For window production the manufacturer recommends following options of price list: Art.-Nr.bo1000 base unit Art.-Nr.bo1050 protection Art.-Nr.bk0180 arc marker Art.-Nr.gt0250 glazing bead construction 1 lengthenning : bo1720 ot bo2510. (technical details according to manufacturer - without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.