138,540 used machines on RESALE, but how to find them? Machine Search
SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003
SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - tilting blades 45° - n. 2 motors 1.1 kw - blade diam. 330 mm - v. 380/50 - sn 96T233 - year 1996
SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF2 - nc ISAC - perimetral net - volt. 380/50 - year 1996
With filters and lighting Auction-ID: A1-49895-119
SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - 4.5 kw - blade diam. 330 mm - v. 380/50 - sn 99T318 - year 1999
Pavan S.p.A. double shaft paddle mixer, model: GRIM6P, number: X17201, year of construction: 1998, 380 V, 3 Ph, 50 Hz, machine weight: 1160 kg, inside dimensions: (2x) 1740 mm x 280 mm x 460 mm, total dimensions: 2250 mm x 780 mm x 1100 mm.
Toresani double shaft paddle mixer, inside dimensions: (2x) 1740 mm x 330 mm x 460 mm, total dimensions: 2080 mm x 1250 mm x 1370 mm.
Dinnissen Process Technology double shaft paddle mixer, type: 304-30-2x3, machine number: 181195, year of construction: 2018, volume: 750 litre, dimensions: 3700 mm x 1400 mm x 900 mm.
Good condition Auction-ID: A1-50540-119
Complete with approximately 50 different Beldé paper drills Auction-ID: A3-50009-28
Equipped with wooden top and metal base Complete with 2x office chair and 3x various drawer unit including 2x mobile. Except content, issued according to instructions Auction-ID: A3-50009-1006
Equipped with foot control, mounted on pallet Auction-ID: A3-50009-26
P409 - used approx. 25 m³ / 25,000 litres HDPE tank, plastic tank, double-walled, flat bottom tank. technical details: capacity: approx. 25 m³ / 25,000 litres material: HDPE tank, plastic tank manufacturer: Formoplast specific weight: min. 1.55 kg/L dimensions: approx. Ø 3.49 m × H total 4.50 m test mark: PA-VI 321.103, DIBT and media list available, AHL/ASL listed Miscellaneous: Used HDPE tank in good condition, cleaned inside, uncleaned on the outside. Above-ground storage tank for outdoor use, standing on a flat floor, double-walled, lid on top of the roof, several inlets and outlets. Only the tank itself is being sold, without attachments such as pipes, fittings and accessories. This container can be used as a storage tank for many different media. Former tank for 40% ironIIIChloride, DIBT and media list available. Sulfuric acid tank, hydrochloric acid tank, bleach ...
New battery. Starts and drives perfectly. Auction-ID: A3-46132-6000
Pneumatic double piston dosing pump for pumping and mixing 2 media. 1 pneumatic cylinder with 2 pump heads. Required air pressure 8 bar. 1/2-inch connections with 4 stopcocks. Up to approx. 40 strokes per minute, or approx. 80 litres per minute / approx. 5 cbm per hour. On platform wagon ant with 2 swivel/brake castors and 2 fixed castors. Overall pump dimension: 6001300x1000mm, weight about 80kg.
Cutting depth:70 mm engine output:12.4 A, 220/380 V , 2 x 6 kW working length:2500 mm dimensions of the machine ca.:3900 x 1100 x 1000 mm weight:1500 kg
engine diesel engine Cummins F3.8 - Stage 5 power approx. 114 kW / 154 HP shafts with 9/9 discs with 6 knives per disc (reconditioned) track system with track protection pads hopper with vibro chute Permanent-Over Belt Magnet remote control weight approx. 11 t
Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates
Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100
Gebr. Bayer GB-2680N - Industrial bench grinder with drill grinding device - Drill grinding device - Diamond puller - Cooling water pump - Machine light Specification - Grinding wheel Ø: 210 / 280 mm - Grinding wheel width: 40 mm - Speed: 1450 rpm - Motor power: 1.5 kW - Dimensions WxHxD: approx. 1450 x 1600 x 1300 mm - Weight: approx. 300 kg
maximum number of results exceeded
please refine your search
100 € 
