cnc center used for sale

USED MORI SEIKI NZ2000 T2Y CNC LATHE Year: 2010 Number of cutting hours: approx. 19,500 hours Main spindle Bar diameter: 65 mm Max. turning diameter: 310 mm Max. turning length: 810 mm Spindle nose: JIS A2-6 Spindle bore: 73 mm Spindle power: 25/22 kW Spindle speed: 5000 rpm C-axis: 360° Indexing Increment 0.001° Counter Spindle Bar Diameter: 65 mm Spindle Nose: JIS A2-6 Spindle Bore: 73 mm Spindle Speed: 5000 RPM C-Axis: 360° Indexing Increment 0.001° Upper Turret Number of Positions: 16 Number of Motorized Positions: 16 Axis Travel: X=210 mm - Y=110 mm - Z=300 mm Lower Turret Number of Positions: 16 Number of motorized positions: 16 Axis stroke: X=210 mm - Y=110 mm - Z=810 mm Equipped with 1 CN MORI SEIKI MSX 701 IV 1 Clamping in collet on both spindles 1 Tool measuring arm 1 Workpiece retrieval arm 27 Fixed tool holders 1 Rotating tool holder 1 Chip conveyor 1 IEMCA MASTER  ...

USED HARDINGE GT-CE CNC LATHE Serial No.: GT-753-B Main spindle Bar diameter: 27 mm Diameter above bed: 300 mm Spindle nose: A2-4 Spindle power: 3.7 kW Spindle speed: 60-6000 rpm Axle travel: X=281 mm - Z=304 mm Equipped with 1 FANUC 18-T CNC Dimensions and weight 1800x1500xH1800mm - weight 2500kg Auction-ID: A1-50950-24

turning diameter: 600 mm turning length: 1200-1280 mm control: Fanuc 210 : 400 mm spindle bore: 90 mm : 3000 U/min spindle drive motor: 18-36,5 kW x-travel: 320 mm z-travel: 1250 mm : 8 Stationen tail stock: MK5 tool taper: VDI 40 machine weight ab.: 5000- 5500 kg weight of the machine ca.: 3000 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED BIGLIA B445 S2M CNC LATHE Serial No.: 6922 Year: 2001 Main spindle Max. bar diameter: 45 mm Max. turning diameter: 240 mm Max. turning length: 320 mm Spindle nose: ASA5 Spindle speed: 5000 rpm Sub-spindle Spindle nose: ASA5 Spindle speed: 5000 rpm Upper turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 170 mm - Z: 400 mm Lower turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 170 mm - Z: 400 mm Equipped with 1 FANUC NC 1 Clamping on the main spindle and on the sub-spindle 1 Workpiece recuperator 1 Chip conveyor 1 IEMCA BOSS 545E bar feeder Dimensions and weight Machine: 4800x2000xH2000mm - Bar feeder: 4000x800xH1300mm - Total weight: 5800 kg Auction-ID: A1-50950-2

USED HARDINGE CONQUEST 42 CNC lathe Bar diameter: 42 mm Diameter above the bed: 269 mm Diameter above the carriage: 180 mm Distance between tip: 350 mm 1 Main spindle with C axis Spindle speed: 50 to 5000 RPM Stroke: X 135 mm - Z 353 mm 1 Turret / 12 stations Equipped with 1 FANUC O-TC CN 1 Programmable counter point 1 Chip conveyor 1 LNS 6/42 hydraulic tubeMachine dimensions and weight : 3200x1500xH1600mm - weight 3200kg - LNS6/42: 4800x800xH1400mm - weight 700kg Auction-ID: A1-50950-23

faceplate diameter: 7100 mm swing diameter: 8000 mm turning height: 4700 mm distance between table and cross rail: 5495 mm workpiece weight: 150 t faceplate turning speed range: 0,3 - 19 U/min main drive motor: 125 kW cross travel: 4400 mm swivel range of slides - vertical: +30 / -15 ° Control: FANUC 18i-T total power requirement: ca. 155 kW weight of the machine ca.: 291 t dimensions of the machine ca.: 8,6 x 17,6 x 8,3 m - CNC Control Fanuc 18i-T --2-Axis simultanous (X- & Z) - Z-Axe with hydraulic balance - Digital Scale in X and Z Axis - 2 rams on crossrail The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED CITIZEN M16V CNC LATHE Year: 2007 Bar diameter: 16 mm Max. turning length: 320 mm Spindle power: 3.7 / 5.5 kW Spindle speed: 10,000 rpm Turret: 20 stations with Y-axis Equipped with 1 Mitsubishi Meldas CN 1 Lubrication pump tray 1 Fire suppression system 1 HP COOL BLASTER CB510 pump unit 1 Chip conveyor 1 IEMCA BOSS 332E/R 44LL bar feeder (4 meter bars) Dimensions and weight Machine: 4000x2000xH1800mm - weight 3500 kg - Bar feeder: 5000x800xH1400mm - weight 800kg + 1 pallet 600x600 weight 200 kg + 1 pallet 1200x1200mm weight 250kg Auction-ID: A1-50950-8

USED OKUMA LCC15 2S CNC LATHE Serial No.: 0311 Year: 12/1998 Main spindle Max diameter above bed: 200 mm Diameter above carriage: 320 mm Max turning diameter: 260 mm Spindle speed: 35-4200 rpm Chuck clamping Ø160mm - 3 jaws Turret 2 Turret / 8 stations Equipped with 1 CN OKUMA OSP 1 Chip conveyor Dimensions and weight 4400x2000xH2400mm - weight 5000 kg Auction-ID: A1-50950-63

USED NAKAMURA SC300L CNC LATHE Serial No.: L301603 Working hours: 4524 hours Main spindle Bar diameter: 71 mm Turning diameter: 350 mm Max turning length: 1100 mm Spindle speed: 6000 rpm C-axis: 360° indexing increment 0.001° Counter-spindle Spindle speed: 6000 rpm C-axis: 360° indexing increment 0.001° Turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X=222 mm - Z=1135 mm - Y=+/- 45 mm Equipped with 1 FANUC 18i-TB CNC 1 HAINBUCH 2701/0011 clamping clamping on the main spindle 1 HFKN 165/46 chuck clamping on the sub-spindle 1 Set of fixed and rotating tool holders 1 Workpiece recuperator 1 Chip conveyor Dimensions and weight Machine: 4650x2200xH2250mm - conveyor: 5300x1500mm - 2 pallets - total weight 5400 kg Auction-ID: A1-50950-56

USED CNC LATHE INDEX 170 M Serial No.: 24932 Spindle bore: 42 mm Max. diameter above the bed: 370 mm Distance between tips: 450 mm Longitudinal stroke of the carriage: 150 mm Stroke of the cross carriage: 400 mm Spindle speed: 4000 rpm Number of positions on the turret: 14 rotating tools Equipped with 1 FANUC series 21i-T CNC clamping on the main spindle1 Set of fixed and rotating tool holders 1 LNS HYDROBAR hydraulic tube Machine dimensions and weight : 3800x2200xH1800mm - weight4500kg - LNS tube: 4800x800xH1300mm - weight 500 kg Auction-ID: A1-50950-33

USED BIGLIA B470 YSM CNC lathe Serial No.: 9957 Year: 2007 Main spindle Bar diameter: 68 mm Max. turning diameter: 200 mm Max. turning length: 300 mm Spindle speed: 100-4000 rpm Spindle bore: 80 mm spindle nose: ASA 6'' C-axis: 360° indexing increment 0.001° Sub-spindle Maximum bar diameter: 42 mm Max turning diameter: 160 mm Max turning length: 200 mm Spindle speed: 100-4000 rpm Spindle bore: 56 mm spindle nose: ASA 5'' C-axis: 360° indexing increment 0.001° Upper turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 165 mm - Y: +60/-40 mm - Z: 380 mm Lower turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 147 mm - Z: 240 mm Equipped with 1 FANUC 18i-T CNC 1 Parts collection belt 1 Tool measuring arm 1 Set of fixed and rotating tool holders 1 Chip conveyor Dimensions and weight Machine:5000x2200xH2000mm - Total weight ...

turning diameter: max. 240 mm turning length: 470 mm control: 840 D sl Operate 4.8 Celos greates pass round over bed: 500 mm swing diameter over slide rest: 290 mm centre distance: 780 mm Main spindle:: turning speed range - main spindle: max. 6.000 min/-1 power capacity - main spindel: 13 / 14 kW max. Torque: 171,5 / 192 Nm inner draw tube diameter: 52 mm C-Axis: 0,001 ° spindle diameter in front bearing: 100 mm spindle nose: FL 140H5 Subspindle:: Spindle speed range subspindle: max. 6.000 min/-1 power capacity - Sub spindle: 12,6 / 16,2 kW max. Torque: 48 / 62 Nm inner draw tube diameter: 37 mm C-Axis: 0,001 ° spindle diameter in front bearing: 90 mm spindle nose: FL 140H5 turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. tool taper: VDI 30 Spindle speed - driven tool stations: max. 5.000 min -1 power capacity - driven tool-stations: 4,18 kW max. T ...

Gantry-type, 3-axis CNC machining centre Working area (type 2132): approx. 3300 x 2100 mm Vacuum table with multiple switchable zones Input: AES lifting table for automatic sheet loading Output: conveyor belt with label printer (labels are printed and applied manually) Main spindle: HSD ES929, HSK-F63 mount, 7.5 kW (9 kW), speed up to 24,000 rpm, 800 Hz, 380 V Main spindle overhauled in 2023 Drilling unit with 16 spindles: 6 vertical spindles in X, 4 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Tool changer with 12 positions Vacuum: Becker vacuum pumps, system approx. 500 m³/h Control: OSAI control system with AES ProcessController, operation via console with touchscreen and keyboard Operating hours: approx. 2,100 h (machine life), main spindle overhauled at approx. 1,360 h

Manufacturer: EMCO Model No.: EMCOMAT-E300 Year: 2003 Condition: Used Stock number: 9613 Maximum turning length: 1500 mm Max. turning diameter: 550 mm Maximum length of travel in the X-axis: 108 mm

The machine is in good technical condition; testing is possible by prior arrangement. Dimensions (m): 8.8 × 2.25 × 3 (estimated). Magnet (mm): 3500 × 700.

The machine is in good technical condition; testing is possible by prior arrangement. Power input (according to records): 110 kW. Dimensions (m): 8.2 x 1.85 x 2.6. Magnet (mm): 4200 x 600. Motor power and grinding head diameter: 90 kW, Ø 800 mm.

CITIZEN CINCOM L 12 VII is a CNC Drehautomat, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Ø 12 mm, Länge 135 mm, Spindeldurchlass 20 mm; X1 32, X2 30, Y1 40, Z1 135, Z2 30; 27 Pos., 8 angetriebene Werkzeuge. Daten: Hauptspindel bis 15'000 t/min, Werkzeuge 10'000/9'000 t/min (0,75 kW), Gegenspindel bis 10'000 t/min, C-Achse 0,001°, Eilgang 35 m/min, 3×400 V 50 Hz, 6,1 kVA, Gewicht 1700 kg, L1760×B820×H1610 mm. Zubehör: LNS EXPRESS 112 Lademagazin, Feuerlöschanlage KRAFT & BAUER. Erreicht enge Toleranzen; Branchen: Automotive, Uhrmacherei, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

\"CAPACITY : . Maximum rotating diameter 380 mm . Maximum turning diameter 250 mm . Maximum turning length 200 mm . Spindle centre distance 500 mm SPINDLE : Spindle nose asa 6 . Self-centering diameter 210-250 mm . Front bearing inner diameter 100 mm . Spindle rotation speed rpm 4000-6000 . Spindle motor power S1 kw 9 . Spindle motor power S2 kw 11 . Maximum torque Nm 210 WAGON : . Useful travel X axis mm 150 . Useful travel Z axis mm 240 . Encoder X/Z-axis transducer . Ball screw diameter X/Z mm 32 . Fast travel speed X/Z axis m/min 30 TOWER . Number of 8x2 stations . VDI 30 tool holder . External tool section 20x20 mm . Diameter of boring bar holder 32 mm . Turret indexing time sec 0.10 . Power of driven tools kw 3.7 . Maximum torque of driven tools Nm 30 NUMERICAL CONTROL : GE FANUC series 18i-T \" Auction-ID: A7-50976-4

\"X\" axis travel: 220 mm \"Z\" axis travel: 410 mm Turning diameter above the transverse carriage:350 mm Spindle motor power: 15 kW Feather line: 500 mm Spindle bore: 51 mm Spindle nose: 6 Max. spindle speed: 4000 rpm Min. Spindle Speed: 25 rpm\" Auction-ID: A7-50976-3

\"GENERALI Supply voltage 380V 3 - ‡ 5% 50 Hz Installed power kW15 Hydraulic working pressure bar 70 C.N.C. 8 simultaneous axes (Expandable up to 16) Display Color Operating temperature +5 / +40 degrees Vector Motorization Axis position detection By optical scale Refrigeration flow rate lt/m 50 Tank capacity 150 lt MAX. BAR DIMENSIONS Round, diameter 60 mm Hexagon, key mm 52 Square, side 42 mm MAX. THREAD DIAMETER Taps and dies aluminium brass M 42 Taps and dies mild steel M 30 Snap-on die or rolling head According to die capabilities Finger thread mm 60 DIMENSIONS AND WEIGHTS Occupied area mm 2620x1300 Height 2450 mm Net weight (approx.) kg 2800 Packaging dimensions mm 2800x1500x2500 Box volume 7.5 m³ SPINDLE Motor power (Vector) KW 12 Speed range rpm 25-3000 Transmission motor coupling A by means of toothed belt TURRET SLIDE Rapid speed mm/1' 10000 Maximum turret carriage stroke mm  ...

Maximum bar diameter 75 mm Maximum spindle speed Rpm 3000 Vector motor power Kw 12 Maximum torque Nm 230 Maximum turret stroke 180 mm Maximum distance between turret and clampmm 290 Minimum distance between turret and gripper mm 110 Tool holes Nr 6 Diam. Of turret holes mm 31.75 Rapid slide speed m/min 10 Maximum thrust force daN 1200 Gearbox speed (indexing) sec 0.3'' Tool detachment mm 0.2 Slide X1,X2, X3,X4 nr 4 Maximum stroke 70 mm Quick speed m/min 10 Maximum force daN 1200 Slide Z2 Nr 1 Maximum stroke Z2 mm 120 Rapid speed Z2 m/min 10 Maximum force Z2 daN 1200 Hydraulics with C.N.C. management Max bar 35 Pliers system in use Din 6343 C.N.C. numerical control Axes 8 Installed power Kw 18 Working pressure Bar 70 Refrigeration flow rate Lt/m 50 Tank capacity Lt 200\" Auction-ID: A7-50976-1

Auction-ID: A7-50976-2

SMEC SL 3000 BLMYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mmTurning length : 956 mm____________Description:Main Spindle:Technology:Belt-driven spindleSpeed (max.):3,000 rpmPower (max.):26 kWBar capacity:91 mmWorkpiece clamping:3-jaw chuck, SAMCHULLY HS-12Tool holder:Technology:12-station turretTool holder:BMT65Tool drive:5,000 rpmTravel in X/Y/Z:215/-/560Main Spindle:Technology:Trailed tailstockStroke:100 mmQuill diameter:110 mmTaper:MT5Main Spindle:Chip Management:Chip ConveyorCoolant Management:IKZ Pump with Oil Skimmer and High Pressure, 10 barTool Measurement:Automatic Measuring ArmAutomation:PreparedFinished Part Removal:Part Catcher with Collection BoxSetup Mode:Electronic Handwheel

CNC lathe GILDEMEISTER CTX 420 linear With control Heidenhain ELTROPILOT 4290 Year of Make: 2003 Max. rotatable diameter: 324 mm Max. rotatable length: 600 mm Max. circumferential diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed revolver Various tool holders VDI 40 Tailstock with quill Chip conveyor Hydraulic jaw chuck SMW Autoblok 0 250 mm Foot switch for jaw chuck + tailstock adjustment Oil mist extraction Coolant Setup Operating Instructions

The machine is in good technical condition; it can be tested by prior arrangement.

EMCO Emcoturn 332 MC PlusYear of manuf. : 2006 Control : Siemens 840D - Powerline Turning diam. : 140 mmTurning length : 480 mm____________Description:Mainspindle:Technology:Belt-driven spindleSpeed:6.300 rpmPower (max.):10 kWTorque (max.):78 NmC-Axis:0,001°Barcapacity:45 mmWorkpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axfix Gr. 65Subspindle:Technology:Belt-driven spindleSpeed:7.000 rpmPower (max.):10 kWTorque (max.):45 NmC-Axis:0,001°Workpiececlamping:3-Jaw chuck, Röhm KFD-HS 130-3Movement in Z:510 mmRapid travers in Z:24 m/minToolcarrier I (X/Z):Technology:Turret with 12 stationsTaper:VDI25Tooldrive:6.000 rpm, 7,5 kW, 12 NmMovement in X/Z:160/510 mmRapid travers in X/Z:20/24 m/minToolcarrier II (X):Technology:Turret with 12 stationsTaper:VDI25Tooldrive:6.000 rpm, 7,5 kW, 12 NmMovement in X:140 mmRapid travers in X:20 m/minEquipment/Accessory:Chipmanagement:Chip  ...

turning diameter: 8 till 38 mm turning length: 250 mm control: Fanuc total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: - mm turning length: 210 mm control: Fanuc total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 350 mm turning length: 200 till 1040 mm control: OSP-P200L total power requirement: kW weight of the machine ca.: 11000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 820 mm turning length: 2000 mm control: Siemens 840 D z-travel: Z1=1980 Z2=2290 mm x-travel: X1=500 X2=500 mm workpiece weight: 1600 kg spindle nose: A15 main spindle bore: 160 mm feeds x-axis: 0,1-18.000 mm/min rapid traverse X-axis: 18 m/min feeds z-axis: 0,1-24.000 mm/min rapid traverse Z-axis: 30 m/min turret I: 16 Wkzg. turret II: 16 Wkzg. tool taper: Capto C6 voltage: 400 V main spindle speeds:: 1-2.500 U/min total power requirement: 180 KVA weight of the machine ca.: 36 t dimensions of the machine ca.: 9,7x2,5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Main spindle: Speed 4,000 rpm Power 18.5 kW Bar passage 65 mm Sub-spindle: Speed 4,000 rpm Power 11 kW Bar passage 65 mm Ejector: Hydraulic with flushing Travel in Z 520 mm Rapid traverse in Z 30 m/min Tool carrier I (X/Y/Z): Technology 10-station turret Tool holder VDI30 Tool drive 4,000 rpm, 4 kW, 16 Nm Travel in X/Y/Z 140/70/450 mm Rapid traverse in X/Y/Z 15/6/30 m/min Tool carrier II (X/Z): 10-station turret Tool holder VDI30 Tool drive 4,000 rpm, 4 kW, 16 Nm Travel in X/Z 140/450 mm Rapid traverse in X/Z 15/30 m/min Equipment/accessories: CNC Control TX 8i Chip management Chip conveyor Coolant management Mahle coolant plant with paper belt filter Bar Feeder, FMB Turbo 8-80 - 3m Length Precast Removal Hydraulic Parts Gripper with Conveyor Belt Oil mist extraction

Key data: 1250 mm, 7000 mm

CNC lathe, Heyligenstaedt, overhauled in 1998 Turning diameter 1250 mm Distance between tips 7000 mm Swivel diameter above the carriage 1000 mm Swivel diameter above the bed 1250 mm Chuck diameter 1250 mm Automatic tool holder and tailstock Spindle bore 150 mm

KERN CNC Cycles Lathe from 2010 for sale.

DATRON MLCube B CNC gantry milling machine – Year of construction 2019 - Professional high-speed CNC milling machine with ± 6,000 operating hours. - Working range X/Y/Z: 1,520 × 1,020 × 245 mm. - Water-cooled HF spindle 1.8 kW – 48,000 rpm, HSK-E25. - DATRON HSCpro control with DATRON next terminal. - Automatic tool changer with 12 positions. - Unique 4-fold synchronous driven rotational axis construction with pneumatic tailstocks. - Including industrial Ringler/Kärcher extraction system (5.5 kW) with custom-made pipe construction. - Includes vacuum clamping, 3D probe and minimum lubrication. - Complete, comprehensively equipped CNC installation, suitable for precision machining and series production. Auction-ID: A3-46142-20703

Brand: Metaleen Tools & Equipment (visible on the frame of the machine). Type: WE67K-160T/3200. Year of manufacture: 2025, deduced from the serial number/order date. Serial number: 2025040195. Capacity t: 160 tons. Working length mm: 3200 mm. Control, brand, type: Delem DA-53T-[N], serial number 244400017, Delem PN D8087-007, software version V1.8.23, produced by Delem, Eindhoven (NL). Auction-ID: A3-46142-11241

Working condition at 0.03mm - lubrication broken - Including extra parts Auction-ID: A3-46142-16606

an industrial CNC controlled sawing machine installation of the brand Calvet, equipped with associated peripherals (dust extraction and compressor). I'll list everything neatly for you: Main installation Brand & type: Calvet (Italian brand specializing in machines for aluminum, PVC and metalworking). This type is a double miter saw (usually used for aluminum profiles, PVC windows/doors and light metals). Equipped with CNC control (touchscreen panel visible on the machine). Lockable protective cover for safety. Automatic feed rail and positioning. Function: Precise cutting of profiles in double angles (left & right) with high precision. Mainly used in window construction, façade construction, industrial aluminum constructions. Extraction system Brand: Italy Vacuum s.r.l. Model: Vortex 58 FT Year of construction: 2022 Specifications: Power: 2.2 kW Power supply: 400 V / 3-p ...

Auction-ID: A3-46142-11326

Features: Brand: Micro-Vu Model: Excel 1601 UM Type: Optical Measuring Machine / CNC Metrology System Measuring range: 1,650 × 1,050 × 160 mm Ruler resolution: 0.1 μm XY accuracy: ±(4.2 + L/200) μm Z accuracy: ±(2.8 + L/100) μm Table load capacity: 100 kg, distributed load Zoom: 36× (12× optical + 3× digital) Screen magnification: 15× to 540× / 30× to 1080× Camera: Black and white Lighting: Macro Ring Light Computer that comes with Windows 11 Metrology software: InSpec Rev. 2.97.10 Last calibration/calibration: January 2026 Condition: Pre-owned, in very good condition Heavy wooden pallet dedicated to transport included Machine dimensions: Approx. 2,600 × 1,720 × 1,650 mm Weight: ± 3,450 kg Transport dimensions according to the data sheet provided: Approx. 2,900 × 1,970 × 1,900 mm Shipping weight: ± 4,300 kg Auction-ID: A ...

must be demoted yourself lifting bridge and forklift is available and can be used machine is in working condition Auction-ID: A3-46142-11479

Used Fami CNC Tool Trolley – Tool trolley incl. tool holders For tools and milling holders Accessories for CNC machines Manufacturer: Fami storage tool systems Max load: 550 kg. Dimensions: 51 x 107 x 90 cm Auction-ID: A1-50936-276

Large black metal frame with X/Y/Z axes Stepper / servo motors (PCB22, etc.) Ball screws, drag chains Auction-ID: A1-51157-28

KEKEISEN PFW-T 4000/12 portal milling machine in a heavy, rigid design for machining large and heavy workpieces. Travel paths of 4,000 x 2,700 x 1,200 mm and a large worktable of approximately 4,000 x 1,800 mm with a table load capacity of 10,000 kg enable the machining of large-volume components. The machine is equipped with a universal milling head with 2 swivel axes and 5 - 1 degree steps NC controlled - adjustable positions (manually or optionally NC-controlled). Hirth gearing ensures precise angle settings. Powerful main spindle drive with approximately 30 kW. Speed range 20 – 7,000 rpm, maximum torque of approximately 1050 Nm. Additional equipment includes a 60-tool changer (KWE60), Chip conveyor, KNOLL filtration system, Hydac cooling units, and central lubrication. Feed rate up to 4 m/min, rapid traverse up to 18 m/min, and feed forces of approximately 30,000 N per a ...

Deckel FP4MA 2204 - CNC Tool Milling Machine - 2022 refurbished - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Hydraulic tool clamping - Automatic manual transmission - Automatic clamping in the X, Y and Z axis - Automatic central lubrication - Coolant device - Direct displacement measurement - Anti-collision clutch in the Y and Z axes - Year of construction 1988 - Incl. tool holders, drilling/milling tools & tool trolleys Specifications Working Range: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head can be moved manually on the headdle block: 150 mm Main Drive: - Pole-switchable three-phase brake motor: manual transmission with clockwise/cou ...

Twin-spindle configuration with pallet changer HSK-A63 spindles Auction-ID: A1-47368-3502

Manufacturer: FIL FRESATRICI (Italy ) Model: FCM Type: FCM 600 Serial Number: L1090 Year of Manufacture: 2000 Controler: Heidenhain TNC426 Machine Type Category: CNC Milling Machine Bed-type / moving table milling machine Or travelling column machining center Travels X (longitudinal): 6000 mm Y (cross): 600 mm Z (vertical): 1000 mm Spindle Taper: ISO 50 Spindle Speed: 6000 rpm Motor Power: ~10 – 25 kW Auction-ID: A1-51153-71

Mori Seiki NT 5400 DCG - 1800 SZYear of manuf. : 2009 Control : Fanuc 30i (MSX-711) Turning diam. : 920 mmTurning length : 1800 mm____________Description:In General:Year of manufacture:2009Control system:Fanuc 30i (MSX-711)Max. turning diameter:920 (470) mmTurning length:1,800 mmBar capacity:103 mmMilling spindle:8,000 rpm, HSK 100Main spindle:RPM:2,400Max. power:37 kWMax. torque:1,432 NmC-axis:0.001°Chuck:SMW Autoblok KNCS 500-155Sub spindle:RPM:2,400Max. power:37 kWMax. torque:1,432 NmC-axis:0.001°Chuck:SMW Autoblok KNCS 500-155Tool carrier I (X/Y/Z/B):Technology:Traveling column with milling spindleMilling spindle:8,000 rpmPower:30 kWTorque:302 NmTool holder:HSK 100X-axis:1,040 mmY-axis:510 (+/- 255 mm) mmZ-axis:1,940 mmB-axis:+/- 120°, index 1°Tool carrier II (X/Z):Technology:Cross slide with tool turretTool drive:6,000 rpm, 40 NmNumber of stations:10X-axis:267 mmZ-axis:1,8 ...

turning diameter: 800 mm turning length: 2000 mm control: MONFORTS control: Control System MTC-K centre height: 400 mm centre distance: 1970 mm swing over bed: 830 mm swing diameter over slide rest: 540 mm spindle bore: 135 mm face slide travel: 450 mm spindle turning speed range: 2 - 1600 U/min transmission ratio: 4 feed power X/Z axis: 11,3 / 23,9 kN rapid traverse X-axis: 4 m/min rapid traverse Z-axis: 6,8 m/min tailstock quill diameter: 125 mm tailstock quill stroke: 200 mm tailstock taper MT: 6 total power requirement: 53 kVA weight of the machine ca.: 6 t dimensions of machine L x W x H: 4,35 x 2,17 x 2,10 m Accessories: 3-jaw chuck 630 mmø, MULTIFIX head D, various tool holders, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 560 mm turning length: 2000 mm control: Heidenhain ManualPlus swing diameter over face slide: 340 mm spindle turning speed range: 1-2500 U/min spindle bore: 63 mm rapid travel - longitudinal/face: 10 / 7 m/min tailstock quill taper MT: 5 tailstock quill diameter: 70 mm tailstock quill stroke: 160 mm main drive motor: (100 / 60 % ED) 15 / 20 kW max. torque on the spindle: max. 1800 Nm max. workpiece weight -without tailstock: 500 kg max. workpiece weight between centres: 1000 kg weight of the machine ca.: 3,6 t dimensions of the machine ca.: 5,5 x 2 x 2 m Equipment: CNC-control Heidenhain Manual Plus M 3-jaw manual chuck Multifix tool holder 3 steady rests Coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm control: Sinumerik 840D SIEMENS table-size: 1.420 x 600 mm table load: 2,0 t spindle taper ISO: 50 spindle turning speed range: 4.000 U/min feed: 2.000 mm/min rapid traverse: 10,0 m/min voltage: 400 V total power requirement: 42 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,60 x 2,45 x 2,15 m coolant tank: 1,25 x 1,25 x 0,50 m - Serial-No.: 076 - Control system: SIEMENS Sinumerik 840D - Electric handwheel - Hydraulic tool clamping with foot switch - SEMPUCO universal milling head - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.