We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,597 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
equipped with KNOLL fitter installation, type: KF 150/500 ( 2014)
used
Max Turning Diameter (in): 16.14 Max Turning Length (in): 13.78 [23.63, 39.37] Spindle Nose Type: A2-6 [A2-8, A2-11] Speed Range (min⁻¹): 50~5,000 [42~4,200, 30~3,000] Standard Power (hp): 30/20 Rapid Traverse X/Z (ipm): 984/1,182
used
Max. turning diameter [mm]: 650 Max. turning length [mm]: 1,500, 2,000 Spindle speed [min-1]: 3,000, [4,200] No. of tools: 40 [80], [120], [180] Motor [kW]: 22/15, [32/22] Features: W (Sub spindle), 2S (2 saddle), 2SW, ATC
used
X-axis travel: 1520 mm Y-axis travel: 720 mm Z-axis travel: 700 mm Table size: 610 x 1854 mm Spindle speeds: 50 - 6000 rpm Spindle nose: ISO40 Toolchanger: 17 pockets Controller: Fagor 8055 MC Featured with: - Chipconveyor - Spindlecooling - Filterunit - ISO40 Toolchanger - Machine manuals Country of origin: Taiwan Spindle motor: 15 kW Machine LxWxH: 4400 x 2800 x 2800 mm Machine weight: 5000 kg
used
SMTCL İ5M4 CNC Vertical Machining Center 3 axis X : 1000 mm Y : 610 mm Z : 650 mm Spindle speed : 10 000 rpm Machine is in excellent condition
used
Doosan DNM 5700 CNC Vertical Machining Center 12 000 rpm Machine has been used in medical sector. Due to the sector, the machine was processed brass and aluminum. It never worked for steel or any other metal materials. Machine has been used only one year. It is like new condition X Axis Travel distance 1050 mm Y Axis Travel distance 570 mm Z Axis Travel distance 510 mm
used
Machine Details Stock-No. 1105-03878 Type of machine CNC Lathe - Inclined Bed Type Make DOOSAN DAEWOO Type PUMA 240 M Year of manufacture 2010 Type of control CNC Storage location FRANCE HAGUENAU Country of origin KORREA Delivery time Immediatly Freight basis Ex site Technical details turning diameter 510 mm turning length 500 mm control FANUC 21 TB swing diameter over bed slide 390 mm spindle turning speed - stepless 4500 rpm Spindle Bore 65 mm power capacity 15 kW total power requirement 27 kW Weight of the machine approx. 4.5 t dimensions of the machine approx. 3.7 x 1.6 x 1.7 m Accessories 12 - tool turret Powered Tooling C - axis 0.001° part catcher with ejector 3-Jaw Chuck Additional information CNC FANUC 21 WITH C AXIS LIVE TOOLS CHUCK TAILSTOK AND CHIP CONVOYER
used
X-travel: 3660mm, y-travel: 1250mm, z-travel: 180mm, length: 5300mm, width: 2200mm, height: 2500mm, weight: 4.3t.
used
Compressed air supply: 6bar, connected load: 53kVA, weight: 9.5t, operational hours counter: 47,253h.
used
X-axis: 1050mm, y-axis: 560mm, z-axis: 520mm, table dimensions: 1200x515mm, max. workpiece weight: 800kg, tool holder: SK40 DIN 69871 / HSK A63, control: Heidenhain iTNC 530, with documentation, an inspection is possible.
used
X-travel: 500mm, y-travel: 250mm, z-travel: 145mm, table dimensions: 885x320mm, max. load: 250kg, rotational speed: 50-10,000/min, controls: HEIDENHAIN TNC 407, weight: 2.4t, operational hours counter: ca. 39,900h.
used
Controls: MAZATROL M PLUS, weight: 5.85t, operational hours counter: 42,150h, with magazine and accessories.
used
Controls: SIEMENS SINUMERIK 810M, weight: 2.5t, with documentation, tool magazine and accessories.
used
X-travel: 800mm, y-travel: 710mm, z-travel: 710mm, B-travel: 360°, controls: SIEMENS SINUMERIK 840D, operational hours counter: 17,225h, including accessories.
used
Connected load: 60kVA, controls: SIEMENS SINUMERIK, length: 5650mm, width: 6200mm, height: 4320mm, weight: 26.57t, with documentation, without y-travel.
used
X-travel: 5310mm, y-travel: 1100mm, z-travel: 850mm, A-travel: +/-120°, C-travel: +/-200°, max. workpiece dimensions: 4000x400x300mm, connected load: 30kW, length: 12,000mm, width: 2450mm, height: 4400mm, weight: 14t, operational hours counter: 50,000h, with documentation, was maintained regularly.
used
X-travel: 550mm, y-travel: 300mm, z-travel: 280mm, max. load: 500kg, table dimensions: 950x370mm, spindle diameter: 50mm, connected load: 22kVA, controls: SIEMENS Sinumerik 810M, weight: 2.6t.
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
used
X-travel: 500mm, y-travel: 400mm, z-travel: 300mm, table dimensions: 600x320mm, connected load: 15.9-30.8kVA, length: 1624mm, width: 2829mm, height: 2608mm, weight: 2.4t, with documentation, without robot.
used
Mori Seiki Dura Vertical 635 Eco Year of construction: 2010 Control: Mitsubishi MSX-853IV Spindle speed: 8,000rpm Spindle power: 12kW Table size: 790x560mm Travels (X/Y/Z): 635x510x460mm max. table load: 600kg Tool holder: BT40 Tool changer: 20-fold Accessories: 32 pieces of tool holders Documentation Operating hours: approx. 14.820h Machine weight: 3.7 tons
used
X-travel: 1600mm, y-travel: 400mm, z-travel: 350mm, max. rotational speed: 10,500/min, rapid traverse: 45m/min, feed rate: 1-10,000mm/min, connected load: 46kVA, controls: Siemens 840D, with documentation, optionally there are one automation and one counter bearing to the fourth axis available.
used
There are two identical machining centers available, table dimensions: 850x530mm, number of tool slots: 48, controls: Heidenhain iTNC 530, operational hours counter machine 1/2: 37,800/36,900h, with tool magazine and documentation.
used
Number of axis: 5, max. rotational speed: 6000/min, pallet dimensions: 1700x1700mm, number of tool slots: 208, connected load: 110kVA, controls: Siemens 840D, weight: 50t, operational hours counter: 60.632h.
used
X-travel: 4100mm, y-travel: 650mm, z-travel: 500mm, clamping table dimensions: 4600x710mm, table height: 840mm, controls: SIEMENS SINUMERIK, length: 7200mm, width: 3800mm, height: 3000mm, weight: 10.5t, with chip conveyor and documentation.
used
Used Good Condition Control Type OSP-P200L X axis stroke 690 mm Y-axis stroke 230 mm Z axis stroke 1.545 mm Axis C 360° Axis B 225° Max workpiece vault Ø 630 mm Max. workable diameter Ø 710 mm workable length 1.500 mm Main spindle speed 38-3,800 rpm Spindle nose A2-8 Tool magazine 20 Chip Evacuator Accessories
used
X-travel: 1600mm, y-travel: 520mm, z-travel: 425mm, table dimensions: 2300x570mm, table height: 900mm, connected load: 36kVA, length: 4100mm, width: 3300mm, height: 2900mm, weight: 7t, operational hours counter: 62,437h, with documentation, was maintained regularly.
used
X-travel: 300mm, y-travel: 220mm, z-travel: 200mm, max. rotational speed: 6000/min, table dimensions: 500x220mm, connected load: 6kVA, weight: 1.3t, operational hours counter: 6807h, including various tool cones.
used
X-travel: 2900mm, y-travel: 2100mm, z-travel: 850mm, A-travel: +/-120°, C-travel: +/-200°, max. workpiece dimensions: 1000x1000x630mm, max. load: 1t, connected load: 30kW, length: 7000mm, width: 5600mm, height: 4400mm, weight: 18t, operational hours counter: 45,000h, with documentation, was maintained regularly.
used
Length: 4100mm, width: 3300mm, height: 2900mm, weight: 7.2t, the spindle is defective.
used
X-travel: 2500mm, y-travel: 920mm, z-travel: 820mm, max. rotational speed: 18,000/min, spindle holder: SK40, number of tool places: 30, connected load: 96kVA, controls: Heidenhain iTNC 530m, weight: 25t, operating/spindle hours: 118,712/ 10,654h, with documentation, without tools, has been serviced regularly, an on-site inspection is possible.
used
X-axis: 1100mm, y-axis: 610mm, z-axis: 610mm, max. milling spindle speed: 6000/min, control: Siemens 840D SolutionLine, operating hours: 40,964h, with tool holders, hydraulic vices, electromagnetic device, further accessories and documentation, without tools and tool cabinet, a roll end milling cutter is also available, on-site inspection is possible.
used
X-axis: 2000mm, y-axis: 400mm, z-axis: 560mm, connected load: 23kVA, weight: 4.7t, fourth axis axis with tailstock, ran in two-shift operation, on-site inspection is possible.
used
X-travel: 17,000mm, y-travel: 4500mm, z-travel: 1400mm, W-travel: 1000mm, table dimensions: 3300x4400mm, max. workpiece weight: 95t, spindle diameter: 180mm, control: Siemens Sinumerik 880, with documentation, three additional angular milling heads are available, on-site inspection is possible.
used
X-travel: 630mm, y-travel: 630mm, z-travel: 630mm, B-travel: NC + 2 pallet changers, controls: Heller uni-Pro CNC 90, the machine needs to be overhauled, a power module is defective, therefore Z-axis does not move, reference point approach not possible, with documentation.
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
used
X-travel: 1300mm, y-travel: 710mm, z-travel: 710mm, table height: 710mm, table dimensions: 1500x660mm, table height: 880mm, max. workpiece weight: 1.2t, length: 3400mmm, width: 3240mm, height: 3000mm, weight: 5.5t, with tools, has been regularly serviced, on-site inspection is possible.
used
Traub TNA 300 Y, Year of construction 1998, Control TX8H, X/Z/Y travel 210/450/ +/- 35 mm, Y axis, C axis, Angetr. Tools 1 turret mount VDI 30, Hollow clamping cylinder 65 mm, Hainbuch BZI 65, LNS Hydrobar, Tailstock Conveyor approx. 20,000 spindle hours,
used
Travel XYZ: 3500/1000/750, 3-axis, speed range: 15000 rpm, tool magazine/tool holder: 40/SK40, control: Heidenhain TNC 426, chip conveyor: scraper belt conveyor. The machine is fully functional and can be inspected on site during operation.
used
Control: MSC-501, number of axes: 3, table size X/Y: 1100mm/600mm, max. table load: 1000kg. Travel X/Y/Z: 1000mm/500mm/500mm, rapid traverse X/Y/Z: 3200mm/min, spindle taper: CAT 40, spindle speed: 10000rpm, tool changer capacity: 30. Operating hours: 48448h, spindle hours: 30465. Machine still in operation, operating and spindle hours are subject to change.
used
Travel X/Y/Z: 630mm/560mm/560mm, tool holder: SK40, max. speed range: 12000rpm, table size X/Y: 1000mm/600mm, groove spacing: 63mm, number of grooves: 9/14H7, max. table load: 500kg, table weight: 400kg. Control: Heidenhain MillPlus (V41X), weight: 6500kg, weight of cooling lubricant system: 1000kg. Including chip conveyor, control panel and manual control panel, AC servo motor. Documentation available. On-site inspection is possible.
new
max. workpiece length X:: 3,200 mm; max. workpiece length Y: : 1,820 mm; Z: 325mm; 5-axis milling spindle: fully interpolating; Liquid-cooled milling motor HSK63F Consumption: 12kW; Tool changer: 22 compartments; Vacuum cups lard: 12 pieces; Drill head: 19 spindles; Groove saw unit: Extraction connection ã ̃: : Dimensions (LxWxH): : Weight:: The WINNER 485 is the 5-axis machining center for panels, doors and windows. The “Cantilever†structure allows the loading of fairly wide panels. The use of birotative Operatin combines project 485 with great flexibility without the need to use expensive aggregates, such as for cuts on inclined planes. CNC specially designed for the processing of: â€" furniture â€" window frames â€" doors â€" windows
new
new
max. workpiece length X:: 3,200 mm; max. workpiece length Y: : 1,500 mm; Z: 325mm; 5-axis milling spindle: fully interpolating; Liquid-cooled milling motor HSK63F Consumption: 12kW; Tool changer: 22 compartments; Vacuum cups lard: 12 pieces; Drill head: 19 spindles; Groove saw unit: Extraction connection ã ̃: : Dimensions (LxWxH): : Weight:: General information WINNER 385 is the 5-axis machining center that is easily suitable for any type of machining. The perfect combination of the 5-axis control unit and the high rigidity of the gantry structure allows this CNC to be used for any type of machining: furniture, windows, stair machining, etc.    WINNER 385: 5-axis technology up to 16 KW portal structure up to 60 tool positions Modular principle: various drill heads, clamping systems,… 3 X machining lengths from 3200 mm to 5200 mm Y machining up to 1550 mm 5- ...
used
Stock Number: 3815 PROCESSING Manufacturer: MIKRON , Type: HSM 400U Machine NO.: 107.87.00.036, Year of manufacture: 2003 Specifications: Table size Macro Magnum mm Gr. table load 25 kg Longitudinal movement (X) 400 mm Transverse movement (Y) 240 Usable mm Vertical movement (Z) 350 mm Spindle cone HSK-E40 Infinitely variable spindle speeds 0-42,000 rpm Spindle motor 13/10 Kw A-Ash +/- 110 degree B: Ash 360 degrees Tool changer Erowa 99 places Control Heidenhain 530 Fabr. Accessories: Length: 2900 mm + Robot, Height: 2700 mm, Width: 2400 mm, Weight: 5500 kg
used
WE OFFER A VERY NICE MACHINE WITH COMPLETE TOOLS ACCESSORIESS. MACHINE IS PERFECT WORKING CONDITION, MACHINE IS IN VERY NICE CONDITION IT HAS NEW SPINDLE 3 MONTHS AGO TOTAL WORKING HOURS :11296 H 17min DATE OF INSPECTION: 09.06.2023 PART COUNT : 61849 MACHINE IS ON POWER WORKING IN THE PRODUCTION OF PLASTIC COMPONENTS. MACHINE WAS USED ON METAL ONLY COPLE DAYS PER YEAR. TECHNICAL DATA: CONTROL: FANUC 0iMF SPINDLE TAPER SK: 50 TRANSMISSION: GEAR SPINDLE SPEED 6000 RPM TABLE SIZE: 2400 X 1000 TABLE LOAD MAX: 4000 KG TRAVEL: X: 2200 mm Y: 1000 mm Z: 800 mm MAFAZINE CAPACITY: 24 TOOLS MACHINE HEIGHT : 3600mm MACHINE DIMENSION: 5700 mm x 3900 mm WEIGHT 20.000 KG MACHINE IS AWAILIBLE IMEDIATELY DIRECT FROM THE FACTORY
used
HAISHU CNC550T 4-axis CNC Lathe Producer- Taian HAISHU Machinery Co. Ltd YOM 2015 Condition- Never used Equipped with two spindle and an additional lower turret with 12 tools, providing automatic two-way processing of the workpiece in the achievement of maximum processing speed. Control CNC GSK988TD Additional Y axis Max. working length 750 mm Maximum turning diameter over bed 550 mm Maximum turning diameter pallet 500 mm Spindle type А12 Hydraulic Jaws: 2x 300 mm Front spindle bore taper 1:20 Spindle pass 75 mm Speed of Servo spindled 0-4000 mm/min Axis X/Z/B Quick moves 40 000 mm/min CS1, CS2 power of main motors: 15 kW Engine motor on axle C- 5.5 kW Moment by Axis X/Z: 15 Nm Movement on Y axis: + 55/-55 mm; Moment on axis B: 20 N. m; Time to change tool 1.6 sec Positioning accuracy 0.005 mm Moves on axes X1/X2- 350 mm Moves on axes Z1/Z2- 1100/1350/1850 mm ...
used
X-travel: 100mm, z-travel: 220mm, max. rotational speed: 5000/min, number of workpiece positions: 14, max. swing: 348mm, max. turning diameter: 150mm, controls: Mitsubishi M730 UM, operational hours counter: 4635h, with handling and fire extinguishing system.