cnc center used for sale

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Lenze ABW, live centering tip -Type: ZN 204 -Recording: MK4 -Dimensions: Ø 69 x 210 mm -Weight: 2.1 kg

fixed point, fixed center point, fixed Morse taper, fixed center point, center points -Fixed centering tip: 2 pieces -Type: IAMU-5A STAS-2294-74 -Recording: Morse cone MK5 -Price/Fee: complete -Transport dimensions: 200/90/H44 mm -Weight: 3.7 kg/pc.

fixed point, fixed center point, fixed Morse taper, fixed center point, center points -Toe angle: 60° -Recording Morse cone: MK5 -Number: 17x centering tips available -Price: per piece -Weight: 2 kg/piece

fixed point, fixed center point, fixed Morse taper, fixed center point -Toe: shaft-mounted -Photo: see pictures -Weight: 1 kg

MEPAL ATLANTIS C3SR profile machining center was built in 2018 in Italy by MEPAL Italia s.r.l (RobTech). The machine is new, stocked after purchase and has never been in operation. MEPAL ATLANTIS C3SR is an advanced CNC machining center designed for precision machining of aluminium and PVC profiles from three sides. It is designed to perform such operations, i.e. drilling and milling of workpieces with a maximum wall thickness of 2.5 mm and lengths in excess of 3 metres. All these processes are performed fully automatically in three numerically controlled axes (X,Y,Z). Inside the large work area there is a rotary work table, which is pneumatically rotatable within the range of -90°, 0° and +90°. This solution allows workpieces to be machined from different sides without having to refit the workpiece. The spindle, driven by a powerful 4.5 kW motor, reaches a speed of as much as 1800 ...

BRETON Contourbreton NC 260 K23 stone machining center was built in 2010 in Italy by Breton S.p.A.. The machine is used for the efficient machining of natural stone slabs and blocks with a maximum weight of 4000 kg. It enables a number of advanced operations to be performed, such as milling, profiling, bevelling and hole drilling. All these machining processes are performed fully automatically, while maintaining the high repeatability and quality of the manufactured parts. The reliable spindle, operating at a maximum speed of 9000 rpm, moves in three numerically-controlled axes. This enables precise positioning of the tool relative to the workpiece during the machining. All axes, driven by powerful motors, achieve a high feed rate and dynamics, which in turn translates into increased production efficiency. All of this makes the offered Contourbreton NC 260 K23 CNC machining center for ma ...

Ref. -No.: 10122 Manufacturer: HELIOPAN Year of construction: 1993 Storage location: Mülheim an der Ruhr Country of origin: Deutschland Measuring range: 160 mm Machine number: 6060 Further information: The measuring jaw is used to measure the outside diameter of cylindrical parts and slim cones With digital display

Key data: 1000 mm, 500 mm, 500 mm

Inv. Num. : 6776 Type: VOC 1000 Produzent: INTOS Erzeugt: 2003 Parametern: Steuerungssystem: SIEMENS Sinumerik Arbeitstischlänge: 1100 mm Arbeitstischbreite: 500 mm Maximale Drehzahl der Spindel: 8000 1/min Verfahrwege X-Achse: 1000 mm Verfahrwege Y-Achse: 500 mm Verfahrwege Z-Achse: 500 mm Spindelleistung: 25 kVA Kegel: SK 40 Anzahl der Stapelpositionen: 20 Stücke Maschinengewicht: 4619 kg

Key data: 1020 mm, 510 mm, 610 mm

Inv. Num. : 6222 Type: BMC 4020 Producer: HURCO Created: 2000 Parameters: Control system: UNIMAX Operating hours: 59,600 h Work table length: 1220 mm Work table width: 510 mm Minimum vertical spindle speed: 80 1/min Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Spindle power: 15 kW Maximum tool weight: 682 kg Max. tool weight: 7 kg Machine height: 2670 mm Machine length: 3350 mm Machine width: 2320 mm Machine weight: 5600 kg Equipment: Tool clamping 2015: Spindle change

Key data: 1300 mm, 540 mm, 720 mm

Inv. Num. : 6148 Type: CFV 1300i Producer: Cincinnati Created: 2010 Parameters: Control system: Heidenhain iTNC 530 Hours: 59260 h Duty cycle: 26295 h Work table length: 1370 mm Work table width: 610 mm Tool magazine: 24 pieces Maximum vertical spindle speed: 9000 1/min X-axis travel: 1300 mm Y-axis travel: 540 mm Z-axis travel: 720 mm Cone: SK 40 Equipment: IKZ Conveyor New spindle 24x clamping tools 4x Hydro Vise

Key data: 1630 mm, 860 mm, 760 mm

Basic machine data Used 3-axis machining center from HURCO Make: HURCO Type: VMX64 Year of Make: 2006 Condition: Used - In working order Control: Name: HURCO Ultimax 4 CNC Track Control Drive power: 285 kW Travels: x-travel: 1630 mm // y-travel: 860 mm // z-travel: 760 mm Technical data: • Spindle 25-8000 rpm • SK 50 interface • Clamping table size: 1650 mm x 9000 mm • 32-fold tool changer • Feed range: 1-18000 mm/min • IKZ • Dividing head type Kitagawa NC 300 rotary and swivel table • Chip conveyor The machine is in good condition. Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Key data: 1050 mm, 510 mm, 560 mm

Inv. Num. : 5759 Type: SVM 105 Producer: LILIAN Created: 2013 Parameters: Control System: Fanuc Oi-MC Operating hours: 23000 h Spindle hours: 5081 h Work table length: 1200 mm Work table width: 500 mm Maximum table load (uniform): 650 kg Tool magazine: 32 pieces Speed: 60-8000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Z-axis travel: 560 cm Cone: BT40 Max. tool weight: 6 kg Main motor power: 11/15 kW Machine height: 2558 mm Machine length: 3050 mm Machine width: 2319 mm Machine weight: 5200 kg Equipment: Conveyor IKZ

Key data: 400 mm, 700 mm, 400 mm

Inv. Num. : 6723 Type: BA400-2 Producer: SW Created: 2004 Parameters: Control system: Siemens - Sinumerik 840D Maximum spindle speed: 17500 1/min Tool magazine: 120 pieces X-axis travel: 400 mm Y-axis travel: 700 mm Z-axis travel: 400 mm Cone: HSK63 Equipment: IKZ High Pressure Pump Filtration Knoll Preparation for 5 axis

Key data: 2500 mm, 1000 mm, 80 mm

Weeke BHX 500 with hedgehog buffer in the inlet Hedgehog buffer with 30 buffer places, length overall: 5700 mm Effective width: 2000 mm Manually movable Weeke machining center with one machining support at the top and one at the bottom Insertion table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS min. workpiece length: 200 mm max. workpiece length: 2500 mm min. workpiece width: 70 mm max. workpiece width: 1000 mm min. workpiece thickness: 4 mm max. workpiece thickness: 80 mm max. workpiece stacking: 2 pcs. Machine Configuration: 2V32 HIGH SPEED 7500 Vertical drilling unit arranged in the upper and lower machining support, each with 32 drilling spindles (individually controllable with variable speed range). 2H8X/2Y Horizontal drilling unit arranged in the upper and lower processing support with 10 over Drill spindles can be called up individu ...

Key data: 760 mm, 430 mm, 450 mm

Inv. Num. : 6921 Type: VMCF-760 Producer: Microcut Created: 2007 Parameters: Control system: Fagor 8055 MC Work table length: 900 mm Work table width: 410 mm X-axis travel: 760 mm Y-axis travel: 430 mm Z-axis travel: 450 mm Cone: ISO 40 Machine weight: 3,300 kg

Key data: 1010 mm, 800 mm, 1010 mm

Inv. Num. : 6942 Type: H63 Producer: ZPS Created: 2005 Parameters: Control system: Siemens Work table length: 800 mm Work table width: 630 mm X-axis travel: 1010 mm Y-axis travel: 800 mm Z-axis travel: 1010 mm

Key data: 3050 mm, 1200 mm, 120 mm

Technical version: Console table 3050 x 1200 mm with manually movable 6 brackets, 2 vacuum cups per console and a pneumatic excavation rail Spot laser set-up aid, vacuum pump CNC control XILOG Plus Main spindle 7.5 kW HSK 63F with C-axis, 1500 – 24,000 rpm Tool changer plate 10-fold 1 adapter unit swivel saw Drill head with: 12 vertical spindles, 4+2 horizontal spindles, groove saw Installation dimensions: 6800 x 3040 mm Weight: 2850 kg

Key data: 1050 mm, 510 mm, 510 mm

Inv. Num. : 7111 Type: NEXUS 510 C Producer: MAZAK Created: 2008 Parameters: Control system: MAZATROL MATRIX NEXUS Duty cycle: 14206 h Hours: 4777 h Work table length: 1300 mm Work table width: 550 mm Spindle drive power: 11 kW Speed: 12,000 rpm X-axis travel: 1050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: ISO 40 Number of stacking positions: 30 pieces Machine weight: 6886 kg Equipment: Tool Probe IKZ

DECKEL MAHO DMU 160P duoBLOCK CNC Machining Center TECHNICAL FEATURES: Year: 2008 CNC Type: HEIDENHAIN TNC 530 Number of continuous axes: 5 X-axis stroke: 1600 [mm] Y-axis travel: 1250 [mm] Z-axis travel: 1000 [mm] X, Y and Z axis travel speed: 15000 [mm/min] Fast travel speed X, Y and Z: 60000 [mm/min] Table dimensions: Ø1500 x 1250 [mm] Maximum weight Tabletop Allowable: 4000 [Kg] Pin attachment: SK 40 (DIN 69871) Minimum speed. Spindle: 20 [rpm] Maximum speed Spindle: 12000 [rpm] Number of tool magazine stations: 60 Machine weight: 35000 [Kg] EQUIPMENT INCLUDED: x1 HEIDENHAIN workpiece probe x1 Laser Gauge x3 HEIDENHAIN measuring rulers on the X, Y and Z axes x1 Watering Center Spindle x1 Chip Conveyor x1 Paper Filtration Unit More information on request.

Top slide, top slide, dovetail guide, tool slide, cross table, support slide, support beam, tool clamp, tool holder, tool mount, centering clamp -Tool clamp: Centering clamp, tool holder -Hole: Ø 58 mm -Dimensions: see photos -Dimensions: Ø 125 x 125 mm -Weight: 5.7 kg

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Traversing centering tip: MK3 mount -Type: unfortunately without a type designation -Centering tip: Ø mm -Dimensions: Ø 52 x 162 mm -Weight: 0.7 kg

vertical machining center, year 2013, 23434 operating hours, CNC i SERIES. Used machine. More info & price on IndustrialBuyer.

CHIRON FZ12 MT CNC Machining Center TECHNICAL FEATURES: Year: 2013 NC Type: FANUC series 31i-B5 X-axis stroke: 550 [mm] Y-axis travel: 320 [mm] Z-axis travel: 420 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Acceleration X/Y/Z axes: 10/12/15 [m/s] Maximum diameter in bar turning spindle: 32 [mm] Maximum speed Turning spindle: 8000 [rpm] Maximum torque turning spindle: 90 [Nm] Maximum speed Spindle: 6500 [rpm] Spindle torque: 14.3 [Nm] Number of tool magazine stations: 24 Maximum length Tool Size: 200 [mm] Maximum weight per tool: 4 [Kg] Maximum diameter Tool Size: 60 [mm] Number of turret stations: 12 Number of Powered Turret Stations: 12 Maximum speed Rotating Tools: 5000 [RPM] Milling spindle tool attachment: HSK-A 50 B-axis travel: -10 [°] / +100 Maximum speed Milling spindle: 24000 [rpm] Maximum power Milling spindle: 36 [kW] Maximum torque Milling ...

ELUMATEC SBZ 140 profile machining center was manufactured in 2010 in Germany by elumatec AG. The machine is designed for the economical machining of aluminium profiles and thin-walled steel profiles with a maximum length of 7600 mm. It enables precise milling, drilling and threading of workpieces with high repeatability. With its capabilities, the ELUMATEC SBZ 140 is ideal for use in plants involved in, amongst others, the production of aluminium joinery and steel structures. The SBZ 140 profile machining centre is distinguished by its 4-axis machining unit, equipped with a high-performance, air-cooled milling spindle. It enables all machining operations to be performed at various angles within a range of -90° to +90°. The machining unit cooperates with an 8-position tool magazine, which automatically exchanges tools in accordance with the programmed sequence. The workpiece is held ...

End-side driver, end-side driver, end-side driver, driver tip, end-side driver, end-side driver -Manufacturer: Lenze ABW, end-face drive -Type: MS3 -Front dimension: Ø 32 mm -Recording: MK4 -Overall dimensions: Ø 45 x 195 mm -Weight: 0.9 kg

Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible.

Key data: 1625 mm, 860 mm, 760 mm

Control Ultimax 4 Travel X/Y/Z: 1625/860/760 mm Speed 8000 min-1 Tool magazine for 40 Wkz., SK 40 IKZ Conveyor

Inv. Num. : 7256 Type: RFM 600/2 Producer: Röders TEC Created: 2000 Parameters: Work table length: 700 mm Work table width: 550 mm X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm

MATSUURA MC 600 VF Vertical Machining Center YOM 1996 X axis 600 mm Y axes 410 mm Z axis 470 mm Working capacity 600 x 410 x 470 mm Tool changer 20 TC Table capacity 800 x 400 mm Table load 400 kg Spindle speed range 30- 8000 Rpm Spindle taper ISO 40 Spindle bore 80 mm Weight 4000 kg

Center height: 200mm, distance between centers: 1000mm, swing over bed/cross slide: 400mm/225mm, spindle bore: 62mm, spindle nose: DIN 55027/6, tailstock taper: MK4, max. spindle speed: 4000rpm, main drive power: 10.5kW, operating hours PLC/motor: 1218h/145h. Machine dimensions X/Y/Z: approx. 2100mm/1080mm/1800mm, weight: approx. 1800kg. An on-site inspection is possible.

x-travel: 1000 mm y-travel: 1000 mm z-travel: 950 mm Control: FANUC total power requirement: - - - kW weight of the machine ca.: - - - t dimensions of the machine ca.: - - - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Machining Center Vertical DECKEL-MAHO - DMC 635 V Built in 2006 in good condition. Control iTNC 530 Heidenhain Duty Cycle: 35172 Hours: 5903 Specifications: x-travel 635 mm y-travel 510 mm z-travel 460 mm Main Spindle: Speed range - main spindle 20 - 8,000 min/-1 Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 83 / 57 Nm Clamping force 8 kN Workbench: Table clamping surface 790 x 560 mm Number of T-slots 4 + 1 T-slots - spacing 100 mm T-slots - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Table height above floor 720 mm Distance between spindle nose and table 120 - 580 mm Tool changer: Number of tool slots 20 pos. Max. tool width 80 / (130) mm max. tool length 250 mm max. tool weight 6.0 kg max. total weight 80 kg Tool - Tool change time 1.6 sec Changeover time span - span 6.0 sec Feeds: Rapid traverse 30 m/mi ...

Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor

BAZ DMC 63V BJ 1999

Key data: 950 mm, 460 mm, 460 mm

Technical data: Manufacturer: Spinner Type: VC750-XL Year of manufacture: 2018 Control: Siemens 840DE SolutionLine V2 Travel: X 950 mm Y 460 mm Z 460 mm Rapid traverse: 36 m/min Working spindle Speed: 12,000 rpm Power: 11 kW (S6/40%) Tool/movement Tool taper: size 40 according to DIN 69871-A Tightening bolts: according to DIN 69872-A Tool changer: 32-fold Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: Multi-function control panel with handwheel and integrated display Chip Conveyor V2 VC750-XL Oil mist extraction Preparation for high-pressure flushing High-pressure flushing 22 bar (additional tank) Blow-out device for spindle taper Compressed air cooling nozzle on the headstock Option package "Shopmill programming" Preparation of interface for Blum infrared probe TC50/TC52/TC54-20 Linear gui ...

Manufacturer: Maka Model: MM7 Year of Manufacture: 2003 Operating hours: 55,103h Technical Details: - Table size: 2 tables with cube dimensions a: 1,500 x 1,500 x 650 mm - Spindle: HSD spindle - Tool holder: HSK63 - Tool stations: 10-station tool change Power consumption: - Compressed air: 6 bar - Nominal voltage: 400V; 50Hz - Control voltage: 24V Find more here - .ucymachines/ Contact us at - sales@ucymachines

Transnorm Roller Alignment Centering Conveyor 2500-700-600 RA2073 Make: Transnorm Roller width (RB): 600 mm Nominal/outer width (NB): 700 mm Length: 2500 mm Roller diameter: 50 mm Roller distance:76 mm Drive motor: R17DT71D4/TH Eletrical Data: 380 V, 0,37 kW Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Construction year: 2008 nominal voltage: 380-480 V Conveying length in mm: 2500 Nominal / outside width in mm: 700 Roll width in mm: 600 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simpl ...

Inv. Num. : 3505 Type: AJV-25/404 Producer: MAZAK Generated: Parameters: Control system: MAZATROL M-32 Work table length: 1240 mm Work table width: 550 mm Maximum table load (even): 800 kg Spindle drive power: 15 kW Minimum vertical spindle speed: 28 1/min Maximum vertical spindle speed: 4000 1/min Mechanical feed length axis X: 1000 mm Mechanical feed length axis Y: 508 mm Mechanical feed length axis Z: 460 mm Cone: ISO 40 Number of tools: 30 pieces Maximum tool diameter: 100 - 150 mm Max. tool weight: 8 kg Distance between uprights: 650 mm Accuracy: 0.02 mm Machine height: 3026 mm Machine length: 3810 mm Machine width: 2590 mm Machine weight: 8.1 t

CNC machining center FEHLMANN Picomax 56 TOP TECHNICAL FEATURES: Year: 2015 CNC Type: HEIDENHAIN TNC 620 X-axis travel: 500 [mm] Y-axis travel: 400 [mm] Z-axis travel: 400 [mm] X, Y and Z axis travel speed: 20000 [mm/min] Min. Distance. Spindle/Table: 120 [mm] Max. distance spindle/table: 520 [mm] Table dimensions: 908 x 480 [mm] Max. weight permissible on the table: 250 [Kg] Pin attachment: ISO 30 Maximum speed Spindle: 12000 [rpm] Number of tool magazine stations: 20 Max. Length of Tool: 240 [mm] Maximum weight per tool: 3 [Kg] Max. tool diameter: 130 [mm] Tool Change Time: 3 [sec] Time between cuts: 8 [sec] Number of cutting hours: 1463 [h] Rated Current: 25 [A] Supply voltage: 400 [V] Machine weight: 3250 [Kg] EQUIPMENT INCLUDED: HEIDENHAIN measuring rulers on the X, Y and Z axes x1 FRIBOSA Switzerland precision clamping vice x1 RENISHAW par ...

Key data: 800 mm, 800 mm, 800 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 80 P duoBlock Year of Make: 2006 Condition: Good  Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 18000 rpm, infinitely variable • HSK-A63 interface • 120x WZW • B-axis (infinitely variable) • C-axis • Table size: 900 mm x 700 mm • Table load: max. 1400 kg • IKZ (internal coolant supply) 40 bar • Chip conveyor • Coolant tank with paper belt filter Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Key data: 1000 mm, 900 mm, 700 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 100 eVo Year of Make: 2013 Condition: Very good – machine partially overhauled in 2023  Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 18000 rpm, infinitely variable • HSK-A63 interface • 60x WZW • Swivel rotary table 950 mm x 800 mm • B-axis 5°/+110° • C-axis 360° • IKZ (internal coolant supply) 40 bar • 600 l coolant tank with paper belt filter • Chip conveyor • Rinsing gun • Blowing air through spindle center Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Nv. Num. : 7401 Type: QM-40 SA Producer: Feller Created: 2007 Parameters: Control system: FANUC Maximum spindle speed: 20,000 1/min Number of axles: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Number of stacking positions: 24 pieces Machine weight: 6300 kg Equipment: BLUM 3D Workpiece Probe 2022/11: GO Interchangeable Arms Spindle change 2021: Installation of the BLUM workpiece probe 2020: Replacement of drive bearings and bolts on X/Y beams Replacement of caliper lubrication dispensers, new brake caliper covers Replacement of the spindle center cooling reducer

Key data: 730 mm, 560 mm, 560 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 60 monoBlock Year of Make: 2006 Condition: Good  Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 20-18000 rpm, infinitely variable • HSK-A63 interface • 60x WZW • Rotary table Ø 600 mm (C-axis) integrated into 1000 mm x 600 mm • B-axis (infinitely variable) • IKZ (internal coolant supply) 40 bar • 600 l cooling lubricant tank with paper belt filter • Chip conveyor • Rinsing gun • Oil and emulsion separation plant • Blowing air through spindle center Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Key data: 1000 mm, 1000 mm, 1000 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMC 100 U duoBlock Year of Make: 2006 Condition: Very good  Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 18000 rpm, infinitely variable • HSKA-63 interface • 180x WZW • 2-fold pallet changer • Pallet size: 1000 mm x 800 mm • NC swivel rotary table • IKZ (internal coolant supply) 40 bar • Chip conveyor • Coolant tank with paper belt filter Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Key data: 1524 mm, 660 mm, 610 mm

General Manufacturer: Hurco Type: VMX60t Year of Make: 2011 Control: WIN MAX Travel: X 1,524 mm Y 660 mm Z 610 mm Spindle Speed: 12,000 rpm Spindle hours: approx. 1,937 h Tool holder: SK40 Tool Changer Number of stations: 24x Table Table size: 1,675 x 660 mm Table load: max. 1,500 kg Dimensions and weight Dimensions: 4,650 mm x 3,470 mm x 3,030 mm Weight: approx. 8,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Chip conveyor IKZ 20 bar Spindle coolers Coolant system Preparation of the Renishaw touch probe Flushing system for chip removal Cooling Water Spray Gun Electronic handwheel DXF Software Mechanical engineering package: Dialog Cycle Groove Dialog Polygon Cycle Dialog Cycle Thread Milling Angular Support for Circular Arc Dialog Reference point for engraving Flexible ...