cnc center used for sale

Mazak VTC 20 B Vertical Moving Post Center :::SPECIFICATIONS::: CNC Model: Mazatrol CNC Version: M plus Tool holder: ISO 40 Spindle speed: 6000 Number of tools: 24 X-axis stroke: 1120mm Y-axis stroke: 510mm Z-axis travel: 510mm Table size: 1040 x 510mm Table capacity: 800Kg Guides: roller High refrigerant pressure: yes

Mazak VTC 300C II Moving Column Machining Center CNC Model: Mazatrol CNC Version: PC Fusion 640 M Tool holder: ISO 40 Spindle power: 18,5Kw Spindle speed: 12000 Number of tools: 30 X-axis stroke: 1740mm Y-axis stroke: 760mm Z-axis travel: 660mm Rapid feeds for linear axes X Y Z: 36m/min Table size: 2000 x 760mm Table capacity: 1400Kg Guides: roller Partition for pallet changer: yes Pressure value: 15bar Chip conveyor: belt conveyor Presetting: yes Electronic range change: yes :::D DIMENSIONS AND WEIGHT::: Length: 4450mm Width: 3460mm Height: 3100mm Weight: 12000Kg

Leadwell MCV 610CR Vertical Machining Center :::SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 0 - M Tool holder: ISO 40 Spindle speed: 6000 Number of tools: 24 X-axis stroke: 610mm Y-axis stroke: 410mm Z-axis travel: 510mm Rapid feeds for linear axes X Y Z: 20m/min Table size: 890 x 500mm Table capacity: 300Kg Machine equipment: Fourth axis table :::D DIMENSIONS AND WEIGHT::: Length: 2040mm Width: 2820mm Height: 2800mm

CNC machining center Fabr. LEADWELL type TDC 450Machine -No: LISIE0304 built in 1995X-axis: 450 mmY-axis: 350 mmZ axis: 250 mmTable mounting surface: 660 x 350 mmSpeed range milling: 10000 rpm.Tool holder: BT 30Feed range: 1 - 12000 mm / min.Rapid traverse longitudinal / transverse / vertical: 36 m / min.Total power requirement: 10 kWDimensions approx: 1700 x 2400 x 2600 mmWeight approx. 2.0 tonsWith- Fanuc controlusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC machining center make DECKEL-MAHO type DMU 80 TBuilt in 1995Technical specifications:Table length: 1100 mmTable width: 650 mmLongitudinal path X axis: 800 mmCross travel Y axis: 650 mmVertical travel Z axis: 550 mmNumber of tools in the changer: 25Tool diameter: 80 mmMax. Tool length: 315 mmTool holder: ISO 40Spindle speed up to: 6300 rpm.Feed speed: 1 - 15000 mm / min.Rapid traverse: 15 m / min.Total power requirement: 29 kWWeight approx .: 5500 kgDimensions approx .: 3100 x 2300 x 2500 mmWith- large work table- electronic handwheel- HEIDENHAIN Millplus control- separate 4th controlled axis manufactured by Walther- chip conveyor- approx. 15 tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and ar ...

Vertical CNC machining center Manufacturer POS Type PosMill 1100 Year of construction 2008 Control Heidenhain iTNC530 approx. 18,700 spindle hours Travel X/Y/Z 1100/600/400mm 10,000 rpm 40 fold tool changer IKZ Machine is in very good condition

VF2SS vertical machining center :::SPECIFICATIONS::: CNC Model: Haas Tool connection: BT 40 Spindle power: 22Kw Number of spindle revolutions: 12000 Number of tools: 24 X Shaft Stroke: 760mm Y Axis Stroke: 406mm Z-axis stroke: 508mm Rapid feeds linear axes X Y Z: 35m/min Table dimensions: 914x356mm Table capacity: 680Kg Guides: roller High cooling pressure: yes Pressure value: 20bar Chip evacuator: screw Presetting: yes :::D IMENSIONS AND WEIGHT::: Length: 3175mm Width: 2500mm Height: 2667mm Weight: 3629Kg

CHIRON FZ 26 L Vertical Machining center CNC Control ETA 17- System 10 X/Y/Z - 1800x550x500 mm Feed: 1 - 15000 mm/min Speeds 20 - 6000 rpm Tool taper SK 40 Magazine/tool changer 46 tools Table plate 2600x630 mm Number of T-slots 4 Total power requirement 30 kW Weight ca.11 t Overall size 7300x2650x2700 mm

CNC machining center - BIESSE SKIPPER V 31 Working range X 2500 Working range Y 900 Working range Z 70 Main motor kW 4.5 Vertical drilling spindles 10 Machine Table Pass-through Device Special Material Clamping System Toothed Gripper - Vertical working area: yes BIESSE BIESSEWORKS Software BIESSE BH 17 yes Number of electrospindles 1 Number of revolutions max/min 24000 ISO 30 Tool Holder Horizontal drilling spindles in the X axis 4 Horizontal drilling spindles in the Y axis 2 X-direction sawing unit Safety device Enclosed cab CE marked: yes Total connection capacity kW 12 Standby still connected

x-travel: 450 mm y-travel: 600 mm z-travel: 330 mm control: iTNC 530 Heidenhain Main spindle:: turning speeds: max. 18.000 min/-1 power capacity - main spindel: 31 / 17 kW max. Torque: 98 / 54 Nm tool taper: HSK A63 swiveling-rotary-table:: rotary table dia.: 320 mm Swivel range: A: +/- 135 ° rotatable: C: 360 ° max. table load: 300 kg Number of revolutions: A: 25 / C: 40 rpm T-slots: 4x 14H7 Tool-Presetter:: number of toolpositions: 55 pos. tool taper: HSK A63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 250 mm max. tool weight: 8,0 kg max. total weight: 220 kg change-time chip to chip: 4,5 sec feeds:: Accelaration: 8 m/sec² Feed force: 4,5 kN rapid traverse ( X / Y / Z ): 30 m/min total power requirement: 40 kVA weight of the machine ca.: 9,0 t dimensions of the machine ca.: 6,5 x 6,5 x 3,5 m Documents: NC-Rotary Swiveling Table: Automati ...

CNC Machining Center Vertical DECKEL-MAHO - DMC 635 V Built in 2006 in good condition. Control iTNC 530 Heidenhain Duty Cycle: 35172 Hours: 5903 Specifications: x-travel 635 mm y-travel 510 mm z-travel 460 mm Main Spindle: Speed range - main spindle 20 - 8,000 min/-1 Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 83 / 57 Nm Clamping force 8 kN Workbench: Table clamping surface 790 x 560 mm Number of T-slots 4 + 1 T-slots - spacing 100 mm T-slots - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Table height above floor 720 mm Distance between spindle nose and table 120 - 580 mm Tool changer: Number of tool slots 20 pos. Max. tool width 80 / (130) mm max. tool length 250 mm max. tool weight 6.0 kg max. total weight 80 kg Tool - Tool change time 1.6 sec Changeover time span - span 6.0 sec Feeds: Rapid traverse 30 m/mi ...

- Horizontal 4-axis Cnc Machining Center In Continuous Control Fanuc 31i-model B -apc 2 Stations -corse X800 X Y800 X Z750 (Voltage : D.850x1000) -60 Random Tool Places -iso 50 Electrospindle With Double Contact Flange, Oil Cooled, 10000 Rpm -pallet Capacity: 700 Kg - External 4-way Hydraulic Locking System 70 Bar With Lock/release Switch -internal/external Air Blow Adjustable M Function - Internal Refrigerant Duct At 70 Bar - Additional Calpeda Shower Cleaning Pump 15 Bar - Robot Electric Attachment Arrangement (Fanuc) -internal System To Reset Length And Tool Radius Renishaw Ts27r, Available New One Equal In Case Of Breakage In The Magazine. - Piece Reset Measurement Probe With Renishaw Rmp60 Cycles (Radio Transmission) -data Server 2gb, Fanuc Aicc 2 Software (High Speed For 3d Molds And Figures, 1ooo Blocks Ahead) -communication With Ports And Usb + Ethernet - Scraping  ...

Dn Solution Nhp 5100 - Continuously controlled 4-axis horizontal CNC machining center Fanuc 31i-model B -apc 2 Stations - racing X730 -60 Random Tool Places - Iso 50 electrospindle with double contact flange, oil cooled, 15000 rpm - Pallet capacity: 500 kg -External air blow Adjustable m” function -Internal refrigerant supply at 70 Bar - preparation of measuring probe for zeroing of piece with Renishaw Rmp60 cycles (radio transmission) -data Server 2gb, Fanuc Aicc 2 Software (High Speed ​​For 3D Molds And Figures, 1ooo Blocks Ahead) -communication with ports and USB + Ethernet - Carpet Chip Conveyor Belt Steering Unit: FANUC 31I-MODEL B X Axis Runs: 730 Y Axis Strokes: 730 Z Axis Strokes: 880 Board length: 500 Board width: 500 Max Piece Dimensions Length x Width x Height Table: D.800x10900 Spindle Table Surface: Tapped Holes Max Piece Spindle Weight: 500 kg  ...

Used Awea BM 850 Machining center - vertical CNC Selca 4045 WORKING AREA: Longitudinal travel X: 850 mm Transversal travel Y: 600 mm Vertical travel Z: 600 mm SPINDLE: Tool holder cone: ISO 40 Rotation speed: 8,000 rpm AC motor power – kW/30 min: kW 11 TABLE: Dimensions: 1,050 x 600 mm Weight allowed on the table: 600 kg TOOL CHANGE: Number of tools: 24 Tool dimensions, Ø x L: 90 x 250 mm Tool weight: 8 kg Machine weight: 6,500 kg Year of construction: 2006

The EMCOMILL 750 CNC machining center is in very good technical condition. By agreement, it is possible to see under the current. Air cooling, internal cooling 20bar. Machine weight: 9000 kg Clamping surface of the table: 900x630 mm Longitudinal movement of the table - x-axis: 750 mm Transverse table movement - y axis: 550 mm Vertical movement of the table - z axis: 500 mm Spindle speed: 12000 rpm Number of places in the stack: 30 pcs Max. workpiece weight: 800 kg Machine dimensions lxwxh: 3158 x 2970 x 3000 mm

x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 1 - 28.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 119 / 85 Nm tool taper: HSK A63 Swivel range milling spindle: B: -10° / +110° ° spindle bearing diameter: 80 mm rotary table:: table diameter: 750 mm rotation range: C: 360 ° rotary speed: max. 100 min/-1 max. table load: 600 kg feeds:: feed speeds: 1 - 90.000 mm/min rapid traverse: 90 m/min Feed force: X/Y: 13,8 kN Feed force: Z: 10,35 kN tool magazin:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 10 kg Workpiece dimension: max. workpiece height: 460 mm Max. Workpiece Area: ca. 750 x 600 mm passage: max. 600 mm total power requirement: 60 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,5 ...

Milling machining center CNC Hedelius Tiltenta T7-4200

The machine is technical and geometrically in a very good state. it was till 2years in use an application and any time inbetrieb are taken. Grter draggable Durchme?er 60 mm the smallest tench-cash Durchme?er 0.5 mm Schleifscheiben-Durchme?er 356 mm Schleifdcheiben width 150 mms control disc-Durchme?er 254 mms control discs width 150 mms Drehzahl-Schleifscheibe 1,780 revo impulse achievement main engine 7 kW speed-control disc 20-250 revos weight 2,900 kg Platzbetarf 8 m²

Swing: 530mm. Swing over carriage: 320mm. Distance between centers: 2000mm. Spindle: 60mm. Equipped with chuck. Equipped with DRO Fagor. Motor power: 10cv.

New lathe. Distance between centers: 1500mm. Swing: 510mm. Swing over carriage: 320mm. Swing over gap: 760mm. Spindle hole: 80mm. CE protections and certificate. Equipped with chuck and steady rest.

Distance between centers: 4500mm. Swing: 825mm. Swing over carriage: 600mm. Swing over gap: 1250mm. Spindle: 80mm. 16 speeds (9-500rpm) Equipped with chuck of 500mm. Equipped with conical device.

Swing over bed: 590mm. Swing over carriage: 340mm. Swing over gap: 820mm. Distance between centers: 1500mm. Spindle: 58mm. Equipped with chuck and steady rest. Equipped with DRO.

Table clamping surface: 2 x 350 x 300 mm traverse path x/y/z: 700/300/250 mm spindle retainer: BT 30 ISA kl. / gr. Table/spindle distance: 450 mm spindle speeds: 6-6000 rpm number of tool stations: 10 pieces feeds: 5-10000 mm / min rapid traverse: x & y/z 25/20 m / min spindle drive: 3,1/4,1 kW Electr. Supply: 400 V kW weight: 2600 kg

Rebuilt lathe. Distance between centers: 750mm. Swing over bed: 500mm. Swing over carriage: 220mm. Spindle nose: 40,5mm. Motor power: 10cv. Equipped with universal chuck of 250mm. CE Protections in chuck and carriage and CE european certificate for second hand machines. Optional: Steady rest. Optional: CE back guard. Optional: DRO Fagor or Heidenhain.

Rebuilt lathe. Distance between centers: 1000mm. Swing over bed: 500mm. Swing over carriage: 220mm. Motor power: 10cv. Spindle nose: 40,5mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm. Optional: Steady rest. Optional: CE back guard. Optional: DRO Fagor or Heidenhain.

Rebuilt lathe. Distance between centers: 1500mm. Swing over bed: 500mm. Swing over carriage: 220mm. Motor power: 10cv. Spindle nose: 40,5mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm and steady rest. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 1000mm. Motor power: 12,5cv. Spindle nose: 51mm. Equipped with universal chuck of 250mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: Steady rest. Optional: CE back guard

Rebuilt lathe. Distance between centers: 1500mm. Swing over bed: 575mm. Swing over carriage: 300mm. Motor power: 12,5cv. Spindle nose: 51mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm and steady rest. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 2000mm. Spindle nose: 51mm. Motor power: 12,5cv. Equipped with universal chuck of 250mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 3000mm. Spindle nose: 51mm. Motor power: 12,5cv. Equipped with universal chuck of 250mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 1500mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 2000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315 and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 3000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: CE back guard. Optional: DRO Fagor or Heidenhain.

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 4000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315 and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 5000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315 and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 6000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 810mm. Swing over carriage: 500mm. Distance between centers: 3000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 400mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 810mm. Swing over carriage: 500mm. Distance between centers: 4000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 400mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 810mm. Swing over carriage: 500mm. Distance between centers: 5000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 400mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 810mm. Swing over carriage: 500mm. Distance between centers: 6000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 400mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

STAMA Mod. MC 2 1997-325S pallet (Pendeltisch Peiseler ATK 520) Aufspannflaeche Pallet: 2 x 550 mm x 330 mm Max Werkstueckgewicht: 2x180kgs X = Y = Z 500 300 = 350 mm Min/Max Distance Spindelnase-Tisch: 200-550 mm rapid traverse X, Y, Z = 40/40/45 36 40 36 Werkzeuge ISO-9000 RPM Spindle IKZ CNC SIEMENS 840 c # 2 LEHMANN doppel 4. Achsen IKZ Unter Strom in unserem Lager It machined \\input shafts\\ (car power steering component) Special price for quick removal

Rebuilt lathe. Swing over bed: 810mm. Swing over carriage: 500mm. Distance between centers: 1500mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 400mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 810mm. Swing over carriage: 500mm. Distance between centers: 2000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 400mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Pallet Pool PS8

New lathe. Distance between centers: 800mm. Swing: 350mm. Swing over carriage: 200mm. Spindle hole: 46mm. Speeds: 18. (31,5-2500rpm). Power: 4hp. Dimensions: 2050x1000mm. Weight: 1100Kgs. Equipped with chuck and steady rest.

Distance between centers: 3000mm. Swing: 600mm. Swing over carriage: 360mm. Swing over gap: 780mm. Spindle: 72mm. 18 speeds (16-1250rpm)

New lathe. Distance between centers: 2200mm. Swing: 500mm. Swing over carriage: 330mm. Swing in gap: 690mm. Spindle hole: 52mm. Speeds: 18. (25-2000rpm). Dimensions: 3700x1000mm. Weight: 1750Kgs. Equipped with chuck and steady rest.

Distance between centers: 2000mm. Swing: 600mm. Swing over carriage: 360mm. Swing over gap: 780mm. Spindle: 72mm. 18 speeds (16-1250rpm). Equipped with chuck.

New lathe. Distance between centers: 1000mm. Swing: 500mm. Swing over carriage: 305mm. Spindle hole: 80mm. Speeds: 18. (19-1500rpm). Weight: 1680Kgs. Equipped with chuck and steady rest.

Rebuilt lathe. Distance between centers: 1000mm. Swing over bed: 725mm. Swing over carriage: 400mm. Motor power: 25-20-15-10hp. Spindle nose: 81mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with new universal chuck MQD of 315mm. Optional: Steady rest. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.