cnc bending used for sale

General Manufacturer: Citizen Type: Cincom K 12 E Year of Make: 2007 Control: Citizen Cincom Number of axles: 7 Outer diameter: 12 mm Turning length: 200 mm Thread diameter: 8 m Spindle Passage: 20 mm Spindle Speed: 200 – 10,000 t/min Tapping diameter: 5 m Sub-spindle Speed: 0 – 10,000 t/min Workpiece length for counter-machining: 80 mm Tool Carrier Number of driven tools: 4 Speed of the driven tools: 6,000 t/min Drive Connection 50 Hz 3x: 400 Volts Spindle motor: 3.7 kW Dimensions and weight Dimensions: 2,020 mm x 1,070 mm x 1,680 mm Weight: approx. 2,250 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Bar Feeder Iemca Genius 118 32U High frequency spindle 80,000 rpm

Magazzino DANOBAT 3 mt. 15 postazioni Circa 15 aanni

Combined Trumpf Trumatic 6000 TruFlow 2000 Co2 laser Preventive maintenance is carried out on the machine by Trumpf annually. installed January 2002 working hours 55734 laser on 16875 Field of work: combined exercise 2585x1280 punch press exercise 2585x1370 laser exercise 2585x1280 Performance: maximum sheet thickness 8mm punching force 220KN active blank holder (programmable) 4,5 - 20kn maximum piece weight 200kg passage height: in punching exercise 35mm in operation of laser 22mm workable materials of laser: iron maximum thickness 8mm stainless steel maximum 4mm aluminum maximum 3mm Speed': x-axis 90m/min y-axis 60m/min simultaneous 108m/min number of trips punching 900min marking 2800min c axis punching 60rpm threading 330rpm Tools: tool places 21 with three collets rotation of all tools tool change time 1.5 -5 seconds max folding height ...

Machine Details Stock number 1105-03807 Machine type CNC turning and milling center Brand Mori Seiki Type NL 2000 SY Year of construction 2005 Control type CNC Control MSX 850 Mapps 3 Storage location FRANCE Country of origin Japan Delivery time immediately Freight Base EX WORK Technical details turning diameter 356 mm Turning length 510 mm Control MSX 850 Mapps 3 Swing diameter 755 mm Standard turning diameter 275 Rod diameter 65 mm Travel - x 260 mm Travel - z 590 mm Spindle drive 15 kW Spindle speed 5000 1/min Turret stations / powered 12/12 Rapid traverse - longitudinal/flat 30 m/min Total power requirement 32 kW Machine weight ca. 5,8 t Space requirement approx. 2320 x 1783 x 1819 mm Accessories Conveyor High-pressure cooling 5 bar Workpiece counter Total counter Double foot switch Information High performance CNC lathe SUP SPINDLE + C AXIS + ...

Deckel, Studer, SAMECA Item 1 CNC 3 axis milling machine Brand: Lid Type: FP 5NC Year of construction: 1986 Condition: Functional Without vice and 3 jaw chucks. Item 2 CNC cylindrical grinding machine Brand: Studer Type: S40-4 Year of construction: 1987 Condition: Functional Item 3 Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional

MEXPOL TUB 830 C CNC lathe was built in 2007 in Germany by MEXPOL Werkzeugmaschinen GmbH. The machine, with its extensive machining capabilities, is an excellent choice for both unit and series production. Workpieces with a maximum diameter of 830 mm are machined inside a large workspace by means of components characterised by the best technical parameters. In order to achieve excellent feed dynamics and repeatability, the X and Z axes are driven by powerful drives of the renowned SIEMENS company. The rigid design of the TUB 830 C x 2250, in turn, eliminates any vibration and oscillation, guaranteeing maximum process stability during even the most intense challenges. The MEXPOL TUB 830C CNC lathe is offered with a wide range of equipment, including an advanced SIEMENS CNC control and a MULTIFIX toolpost. The total weight of the machine is 4930 kg. Technical specifications of the MEXPO ...

FINN-POWER SG-6 turret punch press was built in 1999 in Finland by LILLBACKA CORPORATION. The machine has been regularly serviced throughout its service life. The FINN-POWER Shear Genius SG6 was created as an answer to the daily challenges of modern business. This system is designed for precision punching, stamping and cutting of sheet metal with a maximum length of 3061 mm and a width of 1528 mm. The integration of all the necessary equipment in a single place enables significant reductions in production costs as well as overall working time. All machining processes are performed fully automatically, in a single work cycle. The loading system separates a single sheet from the stack and fixes it in pneumatic clamps. The holes are punched by means of reliable tools taken from the 20-station turret. Parameters such as stroke depth, stroke length and stroke speed can be fully adapted  ...

DMG MORI NTX 2000/1500 SZM CNC turn-mill center was built in 2018 in Japan by DMG MORI CO., LTD. The machine on offer is an excellent choice for the mass production of precision parts, which are used in such industries as automotive or aerospace. This is because the NTX 2000/1500 SZM enables simultaneous turning and milling of workpieces with even the most complex geometries, in a single working cycle. The combination of these two processes significantly reduces production costs, as well as overall working time. The machining process is performed by using the state-of-the-art technology available on the market. It includes, among others, two spindles with a labyrinth cooling system. This system was designed for frequent use of high-pressure coolant. It ensures a constant zero-point height throughout the working cycle, regardless of the amount of generated heat. To limit the effect of  ...

4000 x 2000mm 6000w with auto pallet changer

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i

The machine is in good technical condition, after prior agreement it is possible to test it. Max. turning diameter over the bed 450 mm Max. machining diameter 320 mm Max. machining length 500 mm Distance between centers approx. 640 mm X-axis travel 160 mm Z-axis travel 540 mm Spindle bore diameter 65 mm Spindle taper CM4 Max. spindle speed 4,000 rpm Main motor power approx. 15 kW Turret head 8–12 tools Tool clamping type VDI Control system FANUC 18T (most common) Tailstock Usually no Bar feeder No Machine dimensions (L × W × H) approx. 3,650 × 1,200 × 1,980 mm Weight approx. 4,800 kg Power supply 400 V / 50 Hz

Machine Details Stock number 1105-03825 Machine type CNC lathe Make HARDINGE Model ELITE 8/51 Year of construction 2003 Control type CNC Control FANUC 21 I TC Storage location HAGUENAU FRANCE Country of origin UK Delivery time by arrangement from location Off-site freight base, uninsured Technical details Turning diameter 340 mm Turning length 350 mm Control FANUC 21 I TC Speed 5,000 rpm Drive power 11 kW Number of tools 12 pcs. Number of revolvers 1 Tool holder VDI 30 Information Clamping device main spindle 3 BAKENchuck Tailstock Programming system fanuc 21 I TB 3 AXIS WITH LIVE TOOLS VERY NICE MACHINE CHIP CONVOYER

The machine is in good technical condition, after prior agreement it is possible to test it. Maximum turning diameter: 400 mm Maximum revolving diameter: 760 mm Maximum machining length: 680 mm Maximum spindle passage: 75 mm Travels in the X/Z/Y axes: 250/750/+-50 mm Rapid traverses X/Z/Y: 30/30/12 m/min Machine weight: 6000 kg Machine dimensions: 3230 × 2100 × 2252 mm Fanuc drive performance parameters: Spindle motor power: 15 / 18.5 kW Maximum spindle speed (2 speeds): 0–875 / 0–3500 rpm⁻ Turret power for driven holders: 3.7 / 5.5 kW (30 min) Maximum speed of driven holders: 6000 rpm Servo motor power for X/Z/Y axes: 2.7 / 2.7 / 2.7 kW Cooling pump motor power: 0.5 kW Maximum torque on the MK spindle: 527 / 757 (30 min) N m Maximum torque of driven holders: 35 N m (15 min, 1500 rpm) Recommended clamping pressure range for clamping: 0.35 MPa – 3 MPa

Machine Details Stock-No. 1105-03826 Type of machine CNC Lathe Make HARDINGE Type CONQUEST 42 Year of manufacture 1992 Type of control CNC Storage location FRANCE Country of origin USA Delivery time by arrangement from location Freight basis from location, uninsured Price Technical details turning diameter 264 turning length 353 mm control FANUC 18 TB turning diameter over slide 284 mm turning speeds 500 rpm Rapid traverse 20 m/min power capacity 15 kW Number of tools 12 pcs. Tail Stock Progr. Barrel Additional information GOOD MACHINE FANUC CONTROL 3 AXIS MMACHINE WITH LIVE TOOLS TAILSTOCK

Machine Details Stock number 1105-03830 Machine type CNC lathe Brand HYUNDAI Type HIT 200 M Year of construction 2000 Control type CNC Control SIEMENS 810 D Storage location FRANCE Country of origin KORREA Delivery time immediately Freight base from stock Price Technical details Turning diameter 325 mm Turning length 400 mm Control SIEMENS 810 D Circumferential diameter over bed 500 mm Travel - x 215 mm Travel - z 420 mm Rapid traverse speed 24 m/min Speed range 30 - 4500 rpm Tool turret 12 FOLD VDI40 Spindle bore 52 mm Mounting cone in the tailstock quill MK 4 Tailstock quill diameter 80 mm Tailstock quill stroke 130 mm Drive power 15 kW Operating voltage 380 V/ 50 Hz Total power requirement 23.5 kVA Machine weight ca. 4.5 t Information MACHINE WITH C AXIS AND DRIVEN TOOLS - Control: SIEMENS 810 D - Hydraulic 3-jaw chuck Ø 204 mm - Tailstock with ...

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in 2013 in Poland, is designed for cutting sheets made of e.g. black steel and stainless steel. The machine’s high-quality steel portal has been extended by an additional 700 mm to facilitate the loading and unloading of larger sized workpieces. A sectional extraction table with a length of 6000 mm and a width of 3000 mm effectively eliminates contamination generated during the cutting process, ensuring a high level of safety and great user comfort. Outside the working area of the JANTAR 2 plasma cutting machine, there is a system for cutting pipes and profiles with a special gear and rotating head, giving the possibility of precise cutting of pipes up to 300 mm in diameter by plasma or gas. The machine is also equipped with, among others, an ECS 872 CNC control, a WALTER SKTG 5.5/15 SM screw compressor, a KJELLBERG HiFocus 161 ...

Year of construction 80s Technical data: Travel X/Y/Z: 400 / 400 / 400 mm Tool holder: SK 40 Speed range: 40 - 4000 1/min Feed, step-by-step Adjustable: 2 - 360 mm/min Rapid traverse: 4000 mm/min Angle table: 700 x 460 mm, max. load 350 kg Tool Changer: Number of tools: 20 Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 6 kg Equipment: - Control: CNC path control lid Dialog 11 - Hydromechanical clamping system SK 40 with tightening bolt DIN 69872 - Vertical and horizontal working spindle - Milling head can be swivelled manually +/- 90° - Geometrically stepped direct transmission for maximum torque - Milling performance on the working spindle

The machine is in good technical condition, testing is possible after prior agreement. The machine was installed in 07/2023 and was used very little. The machine was switched on for 3900 hours, of which 540 hours the spindle was running. Swing diameter over bed mm 750 MACHINE SPECIFICATIONS STYLE 750 Machine STYLE 750 Swing diameter over bed mm 750 Swing diameter over slide mm 530 Distance between centers mm 4000 Bed width mm 450 Maximum load between centers kg 1800 Maximum load in combination with fixed steady rest (type U) kg 2500 Main spindle Main motor power (S6) kW 26 Maximum spindle speed (number of gears) rpm 2000 (3) Spindle bore mm Ø105 Spindle taper A2-11 X and Z axis X axis ball screw Ø mm 32 Z axis ball screw Ø mm 50 Rapid traverse m/min 8. Feed range mm/min 0.01-2000 Tailstock Ø quill mm 125 Quill stroke mm 225 Quill taper MT 6 General Weight kg 8150 Machine color Frame  ...

:::SPECIFICATIONS::: CNC Model: Siemens Tool connection: SK 40 Spindle power: 9Kw Number of spindle revolutions: 12000 Number of tools: 30 X Shaft Stroke: 600mm Y-axis stroke: 450mm Z-axis stroke: 450mm Rapid feeds linear axes X Y Z: 35m/min Guides: roller Tilting rotary table: yes Round table type: continuous Tilting rotary table grades: + - 110° Table size: diameter 280mm Load allowed on the table: 200Kg Chip evacuator: carpet Other technical data: maximum tool diameter 80 (125) mm Chip/chip time change 5.5 sec Working feed speed 1 - 30.000 mm/min Resolution 0.001 mm :::D IMENSIONS AND WEIGHT::: Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6500Kg

First installation year 2010 - Bar capacity 52 mm - The machine has always worked with oil - Equipped with Lns Sprint S2 barfeed, front magazine type, and a lot of accessories (for both lathe / barfeed) - Fanuc 31i-A Control.

YAWEI NISSHINBO HPI 3048 turret punch press was built in 2011 in China by Jiangsu Yawei Machine Tool Co., Ltd. The machine is designed for precision machining of sheet metal with a maximum thickness of 6.35 mm. The machining process is carried out using a reliable work head, operating with a maximum force of 30 tonnes. The material feed, on the other hand, is carried out on a large brush table, which prevents scratches and nicks on the workpiece surface and significantly reduces noise levels. This is complemented by an intelligent SIEMENS CNC control with many useful functions. The HPI-3048-36LA2 CNC punching machine weighs 18000 kg. Technical specifications of the YAWEI NISSHINBO HPI 3048 turret punching machine - CNC control: SIEMENS SINUMERIK 802D - number of axes: 5 (X,Y,T,C,Z) - maximum punching force: 30 t - maximum sheet metal thickness: 6.35 mm - maximum sheet metal dimen ...

DURMA TP9 turret punch press was built in 2007 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, distinguished by its high efficiency, is an excellent choice for precision machining of sheet metal with a maximum thickness of 6 mm. The machining process is performed fully automatically by means of a reliable work head operating with a maximum force of 20 tonnes. A 27-station turret cooperates with the head, capable of storing a large number of tools of all sizes and types. The material feed, on the other hand, is carried out on a large brush table, which prevents scratches and scrapes on the workpiece surface and significantly reduces noise levels. The table is also equipped with clamps, responsible for holding the material securely during machining. All this is complemented by an advanced SIEMENS CNC controller with many useful functions. The DURMA TP9 CNC punching ma ...

SAACKE UW I D CNC universal grinding machine was manufactured in Germany in 2020. The extremely powerful machine is designed for the fully automatic wet grinding of a wide range of tools, such as knives, cutters or drills. Machining is performed in a single work cycle, which significantly increases production efficiency, saves time and reduces costs. The SAACKE CNC tool grinding machine allows the use of a chain or pallet system for automatic tool feeding and machining of workpieces within it with a maximum diameter of 250 mm and a length of 480 mm. Precision tool grinding is performed in five numerically controlled axes (X,Y,Z,A,B) using grinding wheels housed in a 6-position magazine separated from the workspace with an automatic grinding wheel changing system. In order to guarantee high travel speeds and positioning accuracy, the X,Y and Z axes of the UWID CNC tool grinder are m ...

Inv. Num. : 6435 Type: MTX Flex 6 Producer: Euromac Generated: 2014 Parameters: Software: RADAN Operating hours: 19932 h Switch-on hours: 12452 h Compressive force: 30 t Machine height: 1900 mm Machine length: 4840 mm Machine width: 3630 mm Equipment: Multitool Flaps

Nitrogen Furnace nitrogen furnace Pit furnace, top condition. 50kW ele Max T. 950°C Anealing in hydrogen, nitrogen atmospere Batch size 800x1000mm run only for tests and start of production similar possible furnace REY, Naberther, CFI, SAIREM, SOLO, ALD, ECM, BMI, CERIC WISTRA, ELTI, ECM, NAGAT SAT, SAFED, SERTHEL, SLFI, MORGAN, OTTO JUNKER, CIEFFE Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Industrie Trockenanlagen Kammeröfen Kunststoff - Beschichtungsöfen Carbonitrieren Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammh ...

The Okuma MA series is a horizontal machining center with long travel distances for heavy-duty machining. The travels X/Y/X 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm -OSP P200M -BJ 2008 -Cuttng Time 17,500 h -Renishaw Tool Eye -ATC 150 SK50 -2 pallet system -Spindle speed 6000 RPM -B-axis NCB 0.001 degrees -X/Y/Z 1000/900/1000 mm -Mayfran Consept coolant system with chip conveyor & high pressure pump 60 bar In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of  ...

RASKIN RT 64-2 punching machine manufactured in Switzerland in 1981, is designed for precise punching of holes in workpieces made of e.g. stainless steel, with a force of 30 tonnes. Technical parameters of the RASKIN RT 64-2 punching machine - maximum press force: 30 t - CNC control - number of strokes: 400/min - power supply of machine RT 64: 3x 380 V; 50 Hz

1250 x 2500mm with SheetMaster loading/unloading - Lots of tooling

TRUMPF TruMatic 5000 R punching machine was built in 2001 in Germany by TRUMPF GmbH+Co. Maschinenfabrik. The machine has undergone regular maintenance and has been serviced on an ongoing basis throughout its lifetime. In 2025, among others, the oil pump, oil accumulators, head seals and transoms were replaced. The TruMatic 5000R is used for precision machining of both thick and thin sheet metal. All machining processes, i.e. punching and marking, are performed with a force of up to 22 tonnes on a large brush table. The table has been specially modified to handle sheets with a maximum length of 4 metres. Its design prevents any scratches or scrapes on the surface of the sheet metal as well as significantly reducing noise levels. The balls built into the table also facilitate the loading and unloading of workpieces. The TRUMPF TC 5000 R CNC punching machine is extremely easy to opera ...

6000 x 2000mm 6000w with transverse conveyor

Vertical Machining Center YCM XV 1250 A - Fanuc MPX 100 i Control -CE marking -Fanuc MXP 100i control -4th axle prepared -Year of construction 2008 / 1x previous owner very well maintained / original paint -Travel X / Y / Z 1270x520x540mm -Rapid traverses X / Y / Z 36m/min / 36 m/min / 24 m/min -Feed speeds approx. 945 IPM (inches per minute) -Distance - table surface to spindle nose 100-645mm -Work table 1350 x 520mm -Max. table load 1000 KG -Spindle speeds up to 10000 rpm -Spindle holder BT 40 -Spindle motor power 11.2 KW - Tool Changer (ATC) 24 stations / side mount type -Tool change time 3.5 se. (T-T) -Electric handwheel -RS 232 interface -Various tool holders -Chip conveyor -Spindle oil cooler -High pressure pump -Oil skimmer -Work light -Machine feet -Machine documentation Dimensions: L x W x H 3.5 x 2.4x2.2 meters / Weight 7000 Kg

Inv. Num. : 6203 Type: E160A Producer: Hyundai Generated: 2018 Parameters: Control system: FANUC i-series Operating hours: 5042 h Switch-on hours: 2531 h Maximum turning length: 300 mm turning diameter: 280 mm Maximum length travel in the X-axis: 165 mm Maximum feed in the Z-axis: 330 mm Maximum main spindle power: 11 kW Maximum spindle speed: 6000 1/min Equipment: Bar feeder Autobar (diameter 65 mm/length 1 meter/year 2018) C-axis Conveyor Tool holder Chuck CNC tailstock Tools

AVIA FNE 50N CNC milling machine was built in 2016 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine, designed for precision machining of workpieces with a maximum weight of 500 kg, is an excellent choice for any industrial plant. This is all due to its reliable spindle, which can work both vertically and horizontally, with the same specifications. The AVIA FNE 50N is controlled by an advanced HEIDENHAIN control system, which is distinguished by its intuitive operation and numerous useful functions. The FNE 50N toolroom milling machine weighs 3000 kg. Technical specifications of the AVIA FNE 50N CNC milling machine General data - feed in the X/Y/Z axis: 800/500/420 mm - feed in the X,Y,Z axis: 5-2000 mm/min - rapid traverse in the X/Y/Z axis: 10/10/7 m/min - maximum workpiece weight: 500 kg - spindle rotational speed: 50-4000 rpm - spindle rotational speed adju ...

Fiber laser machine YAWEI HLF with TOP equipment Laser power: 8kW Sheet size: 3000 x 1500mm automatic shuttle table Siemens touchscreen control with LAN/USB Sheet layer measurement Siemens Drives Precitec Auto Focus Procutter Cutting Head with Autofocus IPG YLS resonator with 8kW The machine will include "everything" 2 years warranty CAD CAM Software Libellula CUT Commissioning Delivery within Germany and Operator/software training offered. We even provide on-site support for unloading + insertion. The machine is a new machine and available immediately. An identical one can be tested at any time under power with us. In our showroom we have various laser machines from our manufacturers under power and various materials to test. We would like to invite you to send us your drawings or drawings. Cut your material. We have been the exclusive trading house and servi ...

Stock Number: 3786 PROCESSING Manufacturer: YCM, Type: FV56A Machine NO.: 401397, Year of manufacture: 2004 Specifications: Gr. table load 300 kg Longitudinal movement (X) 560 mm Transverse movement (Y) 410 mm Vertical movement (Z) 450 mm Gr. distance spindle/table 444 mm Spindle speeds 0-8000 rpm Tool changer 20 places Control Fanuc MXP 100I Fabr. Controlled in axes 3 Operating hours spindle 4042 hours Accessories: Pallet changer 2 - 560 x 420 mm Cooling by spindle Operating instructions Length: 2500 mm, Height: 2450 mm, Width: 1965 mm, Weight: 3000 kg

Inv. Num. : 6637 Type: SRM 125-4000 Producer: Škoda Generated: Parameters: Control system: SIEMENS SINUMERIK 828 D Maximum turning length: 4000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Turning diameter: 1030 mm Travel speed of the Z-axis and X-axis: 2000 mm/min Rapid traverse X: 3000 mm/min Rapid traverse Z: 6000 mm/min Equipment: Feed drives Siemens DRO Heidenhain

IMAL GLADIATOR 255 CNC hydraulic press brake was built in 2003 in Italy by I.MA.L. GROUP. The machine is designed for precision machining of sheet metal with a maximum length of 4100 mm. The high press force of 255 tonnes, combined with an extremely stable design, guarantees the best bending results, even during the most intensive challenges. All this is complemented by an advanced DELEM numerical control with all the necessary functions. The IMAL GLADIATOR 255/41 CNC press brake weighs 20800 kg. Technical specifications of the IMAL GLADIATOR 255 press brake - CNC controller: DELEM DA 65 - maximum press force: 255 t (2550 kN) - maximum sheet metal length: 4100 mm - approach speed: 140 mm/s - bending speed: 10 mm/s - return speed: 140 mm/s - reach: 510 mm - slider stroke: 320 mm - maximum distance between work table and slider: 535 mm - work table width: 90 mm - distance bet ...

CNC lathe DMG MORI ecoTurn 450 With Siemens 840 D SLIMline controller Year of Make: 2016 Max. rotatable diameter: 315 mm Wheelbase: 685 mm Travel X : 224 mm Travel Z : 600 mm Spindle bore: 91 mm Max. spindle speed: 4000 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations C axis , Y axis +/- 50 mm 5 pcs of VDI 40 powered tools 60 VDI 40 tool holders Hydraulic Collet Chuck HAINBUCH with Foot Switch Tool measuring device in the work area Workpiece pick-up device Tailstock with quill Signal light 4 colour Chip conveyor Rinsing gun Coolant device with reinforced pump 20 bar Operating Instructions

Machine Details Stock-No. 1105-03856 Type of machine CNC Lathe Make COLCHESTER Type TORNADO T 6M Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Technical details turning diameter 440 mm turning length 450 mm control FANUC 21 ITB total power requirement 15 kW Weight of the machine approx. 4 t Additional information NICE COLCHESTER T 6M FROM 2006 FANUC 21 ITB CUCK TAILSTOCK SWARF CONVEYOR VDI 30 TURRET 12 P LIVE TOOLS BARFEEDER MBF 1000 INCLUD

DARLEY EHP-L 110 31/25 CNC hydraulic press brake was built in 2000 in the Netherlands by DARLEY B.V. The machine is in very good technical condition and has been regularly maintained throughout its service life. In December 2023, all cylinder seals and oil with filters were replaced by an authorised service. In February 2024, on the other hand a full service of the WILA top tool clamping system was performed. The DARLEY EHP-L 110 31/25 is used for precision machining of workpieces with a maximum length of 3100 mm. The high press force of 110 tonnes, combined with an extremely stable design, guarantees the best bending results during even the most intensive challenges. The deflection arrow compensation function additionally ensures the desired angle along the entire length of the bent workpiece. The offer also includes an extensive equipment, consisting of, among others, DELEM’s adva ...

Mazak Integrex 200 lll S + GL 150 F CNC turning-milling center with second spindle CNC control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 rpm X-axis travel: 580 mm Y-axis travel 160 mm Z-axis travel: 1045 mm B-axis travel: 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool cone Capto C6 Number of tools in the magazine 40 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

ECKERT JANTAR 2 plasma cutting machine was manufactured in 2008 in Poland. The machine equipped with a large working table of 12500 x 2500 mm (length x width) is designed for cutting oversized metal sheets made of carbon and low-alloy steel of maximum thickness of 25 mm (plasma cutting) or 110 mm (oxygen cutting). The torches are powered by a highly efficient HYPERTHERM HPR260 plasma source with a power of 260 A, guaranteeing excellent precision and many years of trouble-free operation. The ECKERT JANTAR 2 12.5×2.5 m plasma-gas cutting machine ensures a high level of safety. A KEMPER filtration system with self-cleaning filters and an extraction table eliminate contamination generated during workpiece machining. The plasma cutting machine is numerically controlled by an ECS 859 controller with all the necessary functions for efficient use of the machine. Technical parameters of th ...

Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

The machine is in good technical condition, after prior agreement it is possible to test it. designed for serial and piece production. It is one of the classic 2-axis CNC lathes (X, Z) with a turret head and is often used in the engineering production of smaller and medium-sized parts. Max. turning diameter: approx. 320 mm Max. turning length: approx. 500 mm Max. diameter above the bed: approx. 500 mm Max. diameter above the slide: approx. 300 mm Spindle Chuck diameter: 210 mm (8") Spindle passage: approx. 52–65 mm Spindle speed: up to 4500 rpm Main motor power: approx. 11–15 kW X-axis: approx. 200 mm Z: approx. 500 mm Rapid traverse: up to 20–24 m/min Turret head 8 or 12 tool positions, possibility of driven tools in the M version Control system Most common: Fanuc 0i-T / Fanuc 21i-T Machine weight approx. 4,000 – 5,000 kg

STIGAL DYNAMIC SPEED HQ plasma cutting machine manufactured in 2012, precisely cuts workpieces made of plain steel, stainless steel and aluminium on a large work table with dimensions (L x W) of 4000 x 2000 mm (the table grate will be replaced with a new one before sale). The numerically-controlled plasma cutting machine ensures a high degree of operational safety, as the machine is equipped with an extraction table designed to eliminate the contamination generated during cutting. The plasma cutting machine is also equipped with a reliable CEBORA PROF 165 HQC plasma source and GudePol GO-R refrigeration dryer. Technical data of the plasma cutting machine STIGAL DYNAMIC SPEED HQ - work table surface (L x W): 4000 x 2000 mm - cutting length: 4000 mm - cutting width: 2000 mm - maximum sheet thickness: 20 mm - plasma source power: 120 A - power consumption: 7000 W - DYNAMIC SPEED H ...

EUROMAC STX Flex 12 1250/30-2500 punching machine was built in 2019 in Italy by Euromac S.p.A.. The machine is designed for precision machining of both thick and thin sheet metal. All machining processes, i.e. punching, nibbling and marking, are performed with a force of up to 30 tonnes on a large brush table. Its design prevents scratches and scrapes on the sheet metal surface and significantly reduces noise levels. All tools are stored in capacious stations, three of which are 360° index stations. The high number of tool strokes per minute, reaching up to 2000/min, allows, in turn, maximum production efficiency during even the most intensive challenges. All this is complemented by an advanced industrial controller that allows even the most advanced programmes to be created in just a few steps. The EUROMAC STX Flex 12 Hybrid 1250/30-2500 CNC punching machine weighs 9500 kg. Technica ...

FINN-POWER X5 turret punch press was built in 2006 in Finland by Finn-Power OY (now PRIMA INDUSTRIE S.p.A.). The machine is used for precision machining of sheet metal with a maximum thickness of 8 mm. The machining process is performed fully automatically by means of a reliable workhead, operating with a maximum force of 25 tonnes. Together with the head, a 20-station turret cooperates which enables a large number of tools of all sizes and types to be stored. The material feed, in turn, is carried out on a large brush table, which prevents scratches and scrapes on the workpiece surface and significantly reduces noise levels. All this is complemented by equipment, consisting of, among others, light curtains and tools. Thanks to all of this, the offered FINN POWER X5 CNC punching machine is the best choice for companies that place emphasis on the high quality of manufactured parts. The to ...

Nibbel, stamping and forming center with C frame (C – Frame stress-free annealed before mechanical processing – 15-year warranty on freedom from cracking) All with one machine: Nibbling – Stamping – Forming – Embossing – Tapping – Marking – Deburring Servo-electric punch head drive - up to 950 strokes per minute, adjustable depending on the material feed speed. Maximum punching force 300 kN Maximum sheet thickness 6.5 mm Largest workpiece weight 200 kg Machining area 1,500 mm x 4,000 mm (with repositioning up to 8,000 mm) Punching head with FANUC® drive - Programmable: - Punching stroke - Punching depth - Punching speed and - Stamping tool acceleration Tool magazine for 15 pieces up to optionally 150 pieces indexable tools Indexing accuracy 0.01° On request, the machine can be supplied with a TRUMPF® tool system Patented vertical tool magazine ...

Inv. Num. : 9002 Type: LB3000EXII MYW800 Producer: OKUMA Created: 2014 Parameters: Control system: OKUMA OSP-P300L CNC Switch-on hours: 65458 h Hours: 36054 h Maximum turning length: 785 mm Max. turning diameter: 480 mm Max. turning diameter: 340 mm Spindle diameter: 80 mm Motor power: 22 kW Minimum spindle speed: 45 1/min Maximum spindle speed: 5000 1/min Travel X: 260 mm Travel Y: 115 mm Travel Z: 510 mm Tool magazine: 12 pieces Length: 3330 mm Width: 1800 mm Height: 2250 mm Weight: 5250 kg Equipment: Baking Collets Axis C Sub-spindle Powered tools OSP-P300L Advanced One Touch CF-M-E FILTERMIST FX4002 Suction High-pressure cooling Grips Tool Holder Reducer insert tube In June 2019, the spindle was repaired due to defective bearings. In June 2025, the U4 control unit was replaced. In October 2025, the M control unit w ...

ESAB EAGLE 2000 plasma cutting machine was built in 2009 in Germany. The machine is designed for machining stainless steel, structural steel, low-alloy steel and aluminium with a maximum thickness of 30 mm and has a very stable and vibration-free welded construction. Excellent cutting precision with simultaneous low operating costs is ensured by the ESAB Precision Plasmarc 201 plasma source with a power of 200 A, which generates a narrow plasma beam with high energy density per small area of material. The plasma cutting machine portal was fixed by two dynamic servo drives operating with low backlash on the machined profile rails (X axis). The dynamic servo drive in the transverse carriage drives the spur gear, which then meshes with the toothed bar of the machine portal, causing transverse movement (Y axis). The plasma cutting machine is equipped with an ESAB CNC control with the late ...