128,430 used machines on RESALE, but how to find them? Machine Search
Max wood length 630 cm; roller conveyor; 4-fold paternoster cabinet; chain transport; Control cabinet Auction-ID: A1-43429-83
With pinstripe recognition; chain conveyor and pusher; without the left conveyor belt Auction-ID: A1-43429-84
VIN number (chassis number) WDB6502821K248272 Vehicle data Brand: Daimler-Benz (D) Type: 1224 AF Vehicle type: So. Kfz. Feuerwehrfz. (fire engine – RW 2) Fuel: Diesel Motor power: 177 kW at 2600 rpm Displacement: 5,958 cc Max. speed: 96 km/h Weights Tare weight: 8.970 kg Permissible total weight: 12,000 kg Permissible axle load front: 4,800 kg Permissible rear axle load: 7,700 kg Permissible trailer load: 6,500 kg Permissible nose weight: 400 kg Dimensions Length: 7,600 mm Width: 2,500 mm Height: 3,100 mm Tires Front and rear: 10 R 22.5 140/137 J Additional equipment Generator 20 kVA Seillier (winch) 50 kN Mechanical light tower Compressed air compressor Kettenfahrhilfe Colour: Leuchtrot RAL 3024 First admission May 18, 1998 Auction-ID: A3-43369-5139
with two drilling units with 4 drilling spindles each Auction-ID: A7-46287-149
starts (presumably booster needed), drives and brakes smoothly - neat truck with good chassis - working air conditioning and working reversing camera - loading ramp tested and working Auction-ID: A3-43369-10897
Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible.
Technical Specifications Approximate weight: 145 Kg Accessories: Tailstock Notes: Maximum load allowed with tailstock 250 Kg; Maximum load allowed horizontally 250 Kg; Maximum load allowed vertically 125 Kg Item sold in unverified status Auction-ID: A1-44614-13
Width 45 cm Year of construction 2008 Automatic Folding Carton Gluer Machine Nonstop friction feeder Pre-crushing device Disc underglue unit KAS Nozzle Gluing Unit with 3 Nozzles Longitudinal seam device Folding floor equipment Equipment for folding and conical boxes Multi-chamber folding cartons Small format equipment for longitudinal seam Wireless, radio-controlled control unit Pressing tape
The distance between the needles: 10 mm; Auction-ID: A7-45992-113
\" Semi-automatic hacksaw, type OH 253 – Solid industrial hacksaw – Semi-automatic saw feeder – Vise with manual clamping– Coolant device – Control panel with speed selection (1500 / 3000 rpm) – Emergency stop – Stable cast/steel construction – Including operating instructions & maintenance documents – Max. round material (90°): approx. 280 mm – Max. rectangular material: 250 × 250 mm – Saw blade: 450 × 40 × 2 mm – Cutting speeds: 6 stages – Main motor: 1.5 / 2.2 kW – Cooling motor: 0.18 kW – Dimensions (approx.): 1790 × 760 × 1020 mm (L × W × H) – Weight: approx. 570 kg \" Auction-ID: A7-46417-146
Unused; in the original packaging; with mounting bracket; 30m+2m cable; Hose diameter 1/2 11mmx15mm Auction-ID: A1-45902-345
\" Automatic wire feeder AWF2 from Seibu for use on wire EDM machines. The module is housed in a solid metal housing and comes in an original wooden box. Connections, controls and mechanical components are completely present on the outside. A functional test under machine was not carried out. Condition: • Used • Housing with slight signs of wear • Plug-in connection mechanically undamaged Scope of delivery: • Automatic wire feeder Seibu AWF2 • Original wooden cassette • Manufacturer: Seibu • Model: AWF2 • Device type: Automatic wire feeder (Wire Feeder) • Application: Wire EDM • Connections: Multi-pin circular connector • Installation position: Marking \"UP / DOWN\" available • Country of manufacture: Japan \" Auction-ID: A7-46417-54
The distance between the needles: 10 mm; Auction-ID: A7-45992-161
Unused; in the original packaging; PVC; with mounting bracket; 9.5mm x 15mm; 1/4 bspt Auction-ID: A1-45902-338
Unused; in the original packaging; with mounting bracket; 30m+2m cable; Hose diameter 1/2 11mmx15mm Auction-ID: A1-45902-344
The distance between the needles: 10 mm; Auction-ID: A7-45992-160
Unused; in the original packaging; steel; with mounting bracket; 9.2mm x 4.5mm; 1/4 bspt Auction-ID: A1-45902-341
Dimension: 2300 x 1780 mm; Not tested; Auction-ID: A7-45992-149
The distance between the needles: 12 mm; Auction-ID: A7-45992-162
The distance between the needles: 10 mm; Auction-ID: A7-45992-163
Unused; in the original packaging; steel; with mounting bracket; 9.2mm x 4.5mm; 1/4 bspt Auction-ID: A1-45902-340
Unused; in the original packaging; with mounting bracket; 20m+2m cable; rolled up to 1000W; fully rolled out 2500W; Auction-ID: A1-45902-343
\" Manufacturer: EROWA Type: ER-009380 / ER-007523 EROWA Quick Chuck Automatic EDM Tool Holder Automatic quick chuck from EROWA for use on die-sinking EDM machines. The holder is used for fast and reproducible clamping of electrode holders in the EROWA clamping system. Delivery includes original packaging and documentation from GF AgieCharmilles. • Manufacturer: EROWA • Type: Automatic quick-release chuck • Item numbers: ER-009380 / ER-007523 • Additional holder: ER-032815 • Application: Die-sinking EDM • System: EROWA clamping system • Machine: compatible with GF AgieCharmilles • Condition: very good used condition • Origin: Made in Switzerland \" Auction-ID: A7-46417-399
The distance between the needles: 10 mm; Missing needle pill; Auction-ID: A7-45992-164
Unused; in the original packaging; PVC; with mounting bracket; 9.5mm x 15mm; 1/4 bspt Auction-ID: A1-45902-339
The distance between the needles: 10 mm; Auction-ID: A7-45992-114
Direct Drive; Automatic cutting; 220V; Auction-ID: A7-45992-9
Distance between needles: 12 mm; Auction-ID: A7-45992-168
Distance between needles: 12 mm; Auction-ID: A7-45992-169
Unused; in the original packaging; with mounting bracket; 20m+2m cable; rolled up to 1000W; fully rolled out 2500W; Auction-ID: A1-45902-342
Distance between needles: 10 mm; Auction-ID: A7-45992-108
The ventilation system was used to extract kitchen exhaust air. The system is weatherproof and can therefore also be installed outdoors., Additional title: Fan for air exchange, Flow capacity: 20000 m³/h, External compression: 600 Pa Total compression: 734 Pa, Fan revolution: 1160 1/min, Noise level next to the unit: 58 dB(A) in 1 m distance, Power: 5,82 kW (inkl. Frequency converter), Motor 7,5 kW, Current: Motor-electric power 16,01 A, Voltage: Motor-Voltage 3 x 400 V, Frequency: 53 Hz, Length: approx. 4070 mm, Width: approx. 1630 mm, Height: approx. 1810 mm, Weight: 1200 kg, Operation / Control: controlled via wall mounted cabinet with integrated controllers, Material: Stainless steel cabinet, Features: Fan (free spinning wheel), Frequency controller, electrical cabinet, bird protection (780 x 780)
CONTROLS NC controls SIEMENS S7 TECHNICAL SPECIFICATION max. diameter of saw blade: 460 mm cutting capacity round: 146 mm cutting capacity square: 138 mm mitre cutting: no .. oblong: 250 mm .. .. x: 100 mm .. to: 220 mm/min DIMENSIONS / WEIGHTS space requirements -left/right-: 2200 mm space requirements -front/back-: 1950 mm total height: 2000 mm total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%
Weighing range min.: 175g, temperature range: 10-40°C, voltage: 230V, frequency: 50Hz, with EC declaration of conformity. An on-site inspection is possible, not under power.
CONTROLS PLC TECHNICAL SPECIFICATION max. cutting height: 360 mm sawband length: 5334 mm sawband width: 41 mm max. bar feed (single stroke): 600 mm cutting speed min.: 14 m/min cutting speed max.: 102 m/min power of band drive: 5.5 kW ELECTRICAL SPECIFICATIONS total power consumption: 10 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 2840 mm space requirements -front/back-: 2800 mm total height: 2130 mm total weight approx.: 2540 kg
The SIAT F144/4 automatic case erector with a box storage magazine is designed to form cartons and then seal the flaps with adhesive tape, creating a container ready for filling. Its capacity is variable, with a capacity of up to 700 boxes per hour depending on the carton dimensions. Adjusting the machine is quick and easy. The F144/4 is easy to use and built to CE safety standards. Auction-ID: A7-46406-1
Used for attaching heels to shoes by nailing. Auction-ID: A7-46462-9
Gildemeister G20, 6-Spindel-Portal-Drehautomat, GILDEMEISTER 20, Maschine komplett überholt, Elektrik - neu, PLC – neu, Mechanik - generalüberholt -, Geometrieprotokoll – wie Neumaschine –, CE – Konformitätserklärung, einschl. elektrische Standardausrüstung, Grundausstattung der Maschine:, 1 Tippbetrieb zum Einrichten, 1 automatische Zentralschmiereinrichtung, 1 Kühlmitteleinrichtung einschl. Pumpe und Antrieb, Behältervolumen ca. 650 L, 1 Werkzeugspindelführungsblock, 1 Antriebsgruppe für rotierende Werkzeugspindeln einschl. Gewindeschneidgetriebe für jede Werkzeugspindelposition wahlweise:, - a) Gegenläufig zum Schnellbohren, - b) Synchronlaufend, - c) Zum Gewindeschneiden bzw. Reiben, 2 Planschlitten mit unabhängigen Planvorschub, 4 Kreuzschlitten mit unabhängigem Plan- und, (Längsvorschub als Option) + 1 Maschinen-, leuchte, 1 Paar Wechselräder für Spindeldreh ...
Attec Food Technology fully automatic pig cutting line consisting of: steel hanging line, dimensions: 6500 mm x 400 mm x 1700, Attec automatic primal cutting line, type: AGOL-850, order number: ON17163, year of construction: 2015, 400 V, 3 Ph, 50 Hz, 45 kW, capacity: 800 pigs/hr, product: pork carcasses, left & right, s/s outfeed belt for waste pork legs, belt width: 290 mm, automatic measuring system for precise and individual cuts of individual pork carcass, plastic belt, belt width: 800 mm, 1300 mm, 500 mm, 300 mm, 100 mm and s/s protection fence, total dimensions: 9800 mm x 4200 mm x 2200 mm. Line is never used.
Cross slide in pos. 1, 2, 4, 5, Drive for cross slide in pos. 2, Pickup spindle, hydraulic in pos. 6, Mechanical double slide in pos. 6, Pneumatic workpiece unloading device, High pressure coolant system with chiller, Swarf coneveyor, worm type with magnetic filter unit, Set of tool holders, Set of cams, Number of spindles: 6, Spindle speed [rpm]: 5.000, Auto bar loader: Iemca PRA 52 F
Cutting diameter 230 mm Cutting speed 35 - 70 m/min Cutting width 260 x 200 mm Saw blade length 2720 x 27 x 0.9 mm Total power requirement 1.1 kW Machine weight approx. 0.68 t Dimensions approx. 1.8 x 1.8 x 1.6 m Auction-ID: A7-46460-627
Automatic Saw Saw with - Feeder type RB 1500 - Roller conveyor 1500mm Good condition Saw blade diameter 400 mm Cutting range: around 135 mm Cutting range: square 130 mm Cutting area: rectangle 200 x 80 mm Machine weight approx. 1.2 t Space requirement approx. 2.0 x 1.8 x 1.95 m Condition: unchecked (6) Auction-ID: A7-46460-535
Lubrication pump Delivery pressure 12Kgf/cm² Fuel tank capacity 2l see pictures Auction-ID: A7-46460-628
Horizontal band saw, semi-automatic Cutting diameter 260 mm Cutting range at 90 degrees: around 260 mm Cutting area at 90 degrees: square 250 x 400 mm Cutting speed 20 - 80 m/min Conventional control Total power requirement 2.0 kW Machine weight approx. kg Dimensions LxWxH 2.0 x 1.4 x 1.2 m Auction-ID: A7-46460-431
Hydr. hacksaw machine - Coolant device - 2 speeds Cutting diameter 260 mm Saw blade length 450 x 40 x 2 mm Cutting range at 60 degrees: square 240 mm Cutting area at 90 degrees: rectangle 260 x 180 Total power requirement 2.0/2.6 kW Machine weight approx. 1.4 t Dimensions L x W x H 2.1 x 1.7 x 1.0 m Auction-ID: A7-46460-609
Hacksaw machine - with feed roller conveyor 1000mm - Preset counter - Mataria stop with trigger max. 600mm - Coolant device Cutting diameter 200 mm Saw blade length 350 mm Cutting range at 90 degrees: around 200 mm Total power requirement 3.0 kW Machine weight approx. 0.45 t Dimensions L x W x H 1.4 x 1.4 x 1.3 m Auction-ID: A7-46460-618
Automatic wave saw Saw blade 315mm max. shaft diameter 90mm Speeds 9 - 45 rpm Motor 3.0KW See pictures Condition: unchecked (6) Auction-ID: A7-46460-567
Professional automatic citrus juicer from the top brand Zumex, ideal for use in supermarkets, catering or farm shops. This machine squeezes fresh oranges fully automatically and is designed for self-service, which makes for an attractive additional source of revenue. Thanks to the robust stainless steel construction and easy operation, this is a reliable and hygienic solution for daily use. The machine is equipped with a tap, waste collection and an input basket, making the entire process efficient and user-friendly - PROS: Fully working, Well-known A-brand (Zumex), Self-service concept = extra turnover, High capacity, Stainless steel version, Compact and mobile - Ideal for: Supermarkets, Farm shops, Catering / lunch shops, Juice bars - SELLER CAN LOAD FOR TRANSPORT Auction-ID: A3-43525-10899
Input: 12000 mm. Output: 8000 mm. machine must be dismantled in week 21/22. Auction-ID: A1-41995-150
maximum number of results exceeded
please refine your search
5.000 € 
