cnc automatic punching used for sale

Description: serial number: 041701 control: BOSCH Trumagraph  , max. punching force: 22 tons working area: approx. 2500 x 1300 mm max. sheet thickness: 8 mm max. table load: 200 kg connected load: 19 kVA plate thickness: 8 mm, weight approx.: 11,050 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 5,200 x 2,200 mm

Description: serial number: 041109 control: BOSCH Trumagraph  , max. punching force: 22 tons working area: approx. 2500 x 1300 mm max. sheet thickness: 8 mm max. table load: 200 kg connected load: 19 kVA plate thickness: 8 mm, weight approx.: 11,050 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 5,200 x 2,200 mm

Description: serial number: 041478 control: BOSCH Trumagraph  , max. punching force: 22 tons working area: approx. 2500 x 1300 mm max. sheet thickness: 8 mm max. table load: 200 kg connected load: 19 kVA plate thickness: 8 mm, weight approx.: 11,050 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 5,200 x 2,200 mm

Description:  , , ,Serial Number: 32510005 Technical Data Laser: Co2 laser Control: FANUC AF2000C Power: 2kw Technical data Punching machine: Working dimensions:  , 1500 x 2500 mm without repositioning , 1500 x 5000 mm with 1 repositioning. Force: 196 KN Power: 53kva Max. material weight: 280 kg Max. material thickness: , 6,4 ,mm Tool stations: 31 (tooling not included) Max. tool diameter: 88,9 mm Tool change time: 1,5 sec. Automatization ,system Included  , Serial Number: 835 Model: PR UL 300  , ,AP , YOM: 2004 Capacity: 3000kg Power: 5,5kw Stacking Area. 3 400 x 1 400 mm CE standard Note: Machine was dismantled by AMADA and now , is stored laser capacity: 2 kW, control: FANUC AF2000C, total power requirement: 53 kW, weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 8,320 x 4,203 x 2,773 ...

Swiss type CNC Manurhin KMX TWIN 207 is a double-spindle automatic machine with automatic feeding of bars. The CNC lathe was produced in 2000 in France. Technical data : - type of automatic lathe: Swiss Type - control: NUM - Swiss control - number of axles: 6 - turning diameter up to: 20 mm - diameter of passage Ø: 28 mm - number of turns: 150-8000 rpm - feed: 10/15 m / min - number of tools: 8 + 8 + 4 + 4 pcs - spindle power: 2.2 kW - tailstock: counter spindle - machine weight: 5000 kg Lathe equipment: - two main spindles / two opposite spindles - material feed with FMB Doppel-Turbo - counter spindle: 150-6000 rpm - chip conveyor - Manurhin / Schlichting-System clamps - coolant filtration

CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg

MAX DIAMETER OF ROD: 100 MM MAX CUTTING DIAMETER: 552 MM MAX TURNING LENGTH: 1.195 MM TURRET: 16 ROTATION SPEED: 2800 RPM CONTROL: FANUC 32 B INCLUDES: AUTOBLOK STEADY SLU-3.1 – ZS CAPACITY: 20-165 MM AUTOMATIC FEEDER FOR BARS BREUNING – MOD. MUK 10016-II

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

Ergomat TBC 60 - Multi-slide turning center - as good as new exhibition machine - Rod passage: 60 mm - Tool holder: VDI 25 Compact multi-carriage turning center with eight CNC axes, two-channel control and backside machining. Developed for the ready-to-use production of complex turned parts. - Fanuc 31i-TB dual-channel control - 8 CNC-controlled axes - 2 vertical shaped slides and piercing slides - CNC cross slide at the front - Rear CNC cross slide with servo-driven Sauter turret and driven tools - Tapping spindle integrated in the turret - Astonishingly short cycle times - Backside processing - Coolant device - Generously dimensioned working area for unhindered chip fall - Chip collector - Year of construction: 2021 Specifications: Rod passage: - Round material: 60 mm - Hexagonal material: 52 mm - Square material: 42 mm Main drive: - max. spindle speed: ...

Manufacturer: Maier Type: ML 36 D Year of construction: 2005 Control: GE Fanuc 3li TA Drive power: 16 kw Machining diameter: 36 mm Headstock stroke max.: 220-450 mm Speed: 0-8000 rpm. Number of tool stations: 4 Machine weight: approx. 5 t

NAKAMURA-TOME SUPER NTM3 CNC turning centre was manufactured in 2004 in Japan. Distinguished by its wide machining capabilities and extensive equipment, the machine allows fully automated production processes, while maintaining high precision and reduced operating costs. The high-quality construction additionally effectively dampens any vibrations and ensures maximum process stability, which results in excellent turning results. Workpieces are machined in up to 11 axes using reliable tools stored in three 24-position tool heads. The NAKAMURA SUPER NTM3 CNC lathe is offered with an extensive range of equipment including a BREUNING IRCO SiMag bar feeder, a FANUC 16i-TB CNC controller and additional toolholders. The CNC dual-spindle lathe weighs 12000 kg. Technical specifications of the NAKAMURA-TOME SUPER NTM3 CNC lathe - number of axes: 11 - CNC control: FANUC 16i-TB - number of  ...

Stock number: 3740 CNC LATHE Manufacturer: MAZAK, Type: QT 350 MY Nexus Machine NO.: 184678, Year of construction: 2006 Specifications: orbit diameter 420 mm dia. Max. rot. About bed 700 mm slide. Turning length 1538 mm Main engine power 30 kw Main spindle speed range 25-3300 rpm Spindle bore 102 mm dia. C axis - main spindle movement 0.001 degrees Z Ash movement 1607 mm Y axis 150 mm Tool turret 1 with 12 stations Driven stations revolver 1 12 pieces. Motor power driven tools 7.5 Kw Accessories: Hydr. Chuck main spindle Kitagava B-32/2 - 310 mm mm dia Hydr. Lunette Length: 4300 mm, Height: 4300 mm, Width: 2600 mm, Weight: 8600 kg

Turning diameter max: 20 mm Turning length max: 320 mm each spindle Drilling diameter max: 10 mm Max tap diameter: M8 Main spindle Speeds: 200 - 10,000 rpm. C-axis index: 0.001° Jerk spindle Speeds: 200 - 8,000 rpm. C-axis index: 0.001° Driven tools: 4 places / 200 - 5,000 rpm Driven tools rear: 4 places / 200 - 5,000 rpm. Tool turret: 10 places Bar feeder: FMB Diameter: 3 - 26 mm Rod length: 4,200 mm Country of origin: Japan Machine weight: 2800 kg Machine LxWxH: 3000 x 1400 x 1800 mm

X-travel: 180mm, z-travel: 430mm, max. chuck diameter: 160mm, weight: 10t.

Inv. Num. : 6522 Type: BS18-III Producer: Tsugami Mori Generated: 2000 Parameters: rod diameter: 18 mm Min. rod diameter: 3 mm Maximum spindle speed: 5000 1/min Number of all tools: 16 pieces Number of CNC controlled axes: 5 pieces Equipment: Bar feeder (3 meters) IEMCA Genius 226 Part of the offer: Guiding collets to feed Collet E140 of the main and counter spindle Reducing bushes (incl. collets ER11 ER16) Guide sleeve collet F609 Equipping the machine with tools (square 12x12 mm)

Inv. Num. : 6521 Type: Compact A35 Producer: Kovosvit Generated: 2005 Parameters: bar diameter: 35 mm Maximum main spindle power: 7.5 kW Maximum spindle speed: 7000 1/min Number of CNC controlled axes: 8pcs Length: 2250 mm Width: 1480 mm Height: 1890 mm Weight: 3450 kg Equipment: Bar feeder (3 meters) LNS Sprint 555 Part of the sale: Collets Auxiliary head Polished holders VDI25/ER32 Axis tool holder VDI25 Straight and angled power tool holders Equipping the machine with tools (square 16x16 mm) The feeder is equipped with guide channels, pushers and reducing bushes

Inv. Num. : 6520 Type: Compact A25 Producer: Kovosvit Generated: 2008 Parameters: Control system: Fanuc bar diameter: 22 (26) mm Maximum rod length: 4000 mm Minimum main spindle speed: 50 1/min Maximum spindle speed: 8000 1/min Maximum main spindle power: 5.5 kW Length: 2250 mm Width: 1480 mm Height: 1890 mm Weight: 3400 kg The machine is completed with a guide tube for a 3-meter rod and an internal feed. Included in the sale are: Clamping and feeding collets Auxiliary heads (2x collet / 2x jaw) Collet holder VDI25 Axis tool holder VDI25 Straight and angled power tool holders. Equipping the machine with tools (square 12x12 mm and 16x16 mm)

Stock Number: 3782 CNC LATHE Manufacturer: MIYANO, Type: BNE-51S Machine NO.: 98BX510077, Year of manufacture: 1998 Specifications: Max. swing diameter 51 mm dia. Main engine power 11/7.5 kw Main spindle speed range 4000 rpm Bore through drawing tube 51 mm dia. X axis movement 150 mm X2 Ash Movement 115 mm Z ash movement 380 mm Z 2 axis movement 125 mm Tool turret 1 with 12 stations Powered stations turret 1 6 pieces. Tool turret 2 with 10 stations Powered stations turret 2 5 pieces Counter spindle Motor power counter spindle 5.5/3.7 Kw Max. collet subspindle 41 mm/dia Control FANUC 18T Fabr. Accessories: Charger Kama B4265 fabr. Length: 2600 mm + magazines, height: 1950 mm, width: 2560 mm, weight: 6300 kg

Stock Number: 3789 CNC LATHE Manufacturer: OKUMA, Type: LVT 300-M - Vertical Machine NO.: 132230, Year of manufacture: 2007 Specifications: Max. swing diameter 280 mm dia. Turning length 200 mm Main engine power 22/15 kw Main spindle speed range 40-4000 rpm C axis - main spindle movement 0.001 degree Tool turret with 12 stations Driven werkzeuumdr. 40-4500 rpm Control OSP 200 Fabr. Operating hours spindle 11485 hours Accessories: Load and Unload device Tool setter Chip conveying. Cooling water system. Length: 2800 mm, Height: 2500 mm, Width: 1500 mm , Weight: 5600 kg

Machine Details Stock-No. 1105-03889 Type of machine CNC Lathe Make FEMCO-ASTRHAL Type 20-60 Year of manufacture 1989 Type of control CNC Storage location HAGUENAU Country of origin taiwan Delivery time IMMIDIATELY Freight basis ex stock Price Technical details turning diameter 540 mm turning length 600 mm control Fanuc 10 T turning diameter over bed 540 mm turning diameter over slide 255 mm rapid traverse 15 (X/Z) m/min power capacity 11-15 kW Tool Numbers 12 chip conveyor 1 kW Additional information CNC-lathe clamping tool, main spindle, power chuck TAILSTOCK CHIP TANK cnc control fanuc 15 T 42 DIAMETER HOLE TTHE SPINDLE 11/15 KW 3500 RPM

VERSION 10 PNC axes - Control: FANUC PNC DECO - Rod passage 20 mm - movable headstock Z1 - Speed 10,000 1/min - 2x cross slide with 2x5 tool holders - 10 pre-adjustable tool holders - 4 front units - Counter spindle - Backside processing (4x end, 3x landscape) - Workpiece conveyor - Spaenefoerderer - Tool presetting device - Fire extinguishing system - Central lubrication unit - Oil mist extraction, filter mist - Drill quills, base holder and steel holder - various accessories (see photos) - Rod loading magazine Robobar

Weiler automatic lathe UD 240CNC Bosch CC200T 270 mm length max Swing 190 mm Passage 24 mm rod Pneumatic clamping 8 tool slots Speed 5000 rpm Center height 130 mm P1 25563 hrs P2 1044266 h Power: 11.25 KW Rod magazine Collets Cheek chuck

Weiler automatic lathe UD 24 CNC Siemens 820T P1 65574 P2 28618 380 V 11,25 KW Without tailstock Hydraulic feed and clamping Accessories

Control Fanuc PNC Deco Bar passage 26 mm (32 mm) Max. turning length (max. workpiece length in one clamp) 240 mm Spindle speed range of the main and counter spindle 0 - 8,000 rpm Max. drive power 7.5 kW Max. number of tools on the guide bush 10 Max. number of tools in combination attachment 4 Max. number of tools in counter operation 7 Max. number of axes: 10 (12/C-axis) Accessories: Chip conveyor, loading magazine FMB Robobar SSF-532

CNC Model: Fanuc - CNC Version: 31i - MODEL B - Main spindle power: 3,7Kw Main spindle bar clearance: 20mm - Headstock stroke (Z1): 205mm - Number of spindle revolutions: 10000 Number of linear axes: 6 Number of fixed tool spaces for tool plates: 13 Number of motorized tool plate spaces: 6 Rapid feeds linear axes X Y Z: 35m/min High cooling pressure: yes Pressure value: 20bar Counter-spindle: yes Number of counter-spindle revolutions: 10000 Power versus spindle: 3,7Kw Bar clearance: 20mm Fixed counter-spindle front tools: 2 Number of motorized rear tools: 8 Refrigerant used: emulsion Model and brand bar magazine: Iemca 332 E Chip evacuator: carpet Other technical data: Manually adjustable angular rostrum Machine equipment: Set of fixed and motorized tool holders :::D IMENSIONS AND WEIGHT::: Length: 2334mm Width: 1200mm Heigh ...

Year of construction 2014 Control Siemens 840 Dsl Main Spindle: Motor Spindle Technology Speed 7,000 rpm Power 16 kW Torque 75 Nm Bar passage 50 mm Workpiece clamping collet chuck, Hainbuch Kombi Axfix Gr. 52 Counter spindle: Motor Spindle Technology Speed 7,000 rpm Power 16 kW Torque 75 Nm Workpiece clamping collet chuck, Hainbuch Kombi Axfix Gr. 52 Tool carrier I (X/Y/Z): Technology turret with 12 stations Tool holder VDI 25 Tool drive 8,000 rpm, 1.5 kW, 10 Nm Travel in X/Y/Z 165/70/360 mm Rapid traverse in X/Y/Z 30/15/60 m/min Tool carrier II (X/Y/Z/B): Technology turret with 12 stations and swivel axis Tool holder VDI 25 Tool drive 8,000 rpm, 1.5 kW, 10 Nm Travel in X/Y/Z 215/70/740 mm Rapid traverse in X/Y/Z 30/15/60 m/min B-axis -23.5°/158.5° Tool carrier III (X/Y/Z): Technology turret with 12 stations Tool holder VDI 25 Tool drive 8,000 r ...

General: Built in 1999 Control Fanuc Series 16T Working spindle 500 – 10,000 rpm Turning diameter 20 mm Headstock stroke max. 205 mm Dimensions: 2,670 mm x 1,375 mm x 1,650 mm Weight 3,400 kg Further technical data: Express feed X, Y: 15,000 rpm Express feed A, B: 15,000 rpm Rapid feed Z1, Z2, E: 18,000 rpm Rapid feed C: 90,000 °/min Smallest input unit: 0.001 mm Smallest input unit C-axis: 0.001° Other equipment and accessories: Conveyor Bar feeder FMB turbo 3-26-3200

Hanwha STL 38 sliding head lathe :::SPECIFICATIONS::: CNC Model: Siemens - CNC Version: 840 D - Main Spindle Power: 11Kw - Main Spindle Bar Clearance: 38mm Headstock stroke (Z1): 320mm - Main spindle speed: 8000 - Number of linear axes: 8 - Number of fixed tool positions on the tool plate: 5 Number of driven tool holder plate tool slots: 4 Rapid feeds for linear axes X Y Z: 32m/min High refrigerant pressure: yes Number-of turrets-tool-slides: 1 number-of tools-first-turret-slide: 10 Number-motorized-first-turret-slide: 10 tool-holder-type-first-turret-slide: VDI 30 X-axis-stroke-first-turret-slide: 140mm Y-axis-stroke-first-turret-slide: + - 50mm Sub-spindle: yes Sub-spindle speed: 8000 Power against spindle: 11Kw Bar clearance: 38mm Counter spindle stroke Z : 320mm Number of fixed rear tools: 4 Refrigerant Used: Neat Oil Bar Feed ...

Sliding head lathe Tornos Sigma 20 :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 31i - Model A - Main Spindle Power: 5,5Kw - Main Spindle Bar Clearance: 20mm Headstock stroke (Z1): 230mm - Main spindle speed: 10000 - Number of linear axes: 6 - Number of fixed tool positions on tool plate: 6 Number of driven tool holder plate tool slots: 8 Rapid feeds for linear axes X Y Z: 30m/min High refrigerant pressure: yes Sub-spindle: yes Sub-spindle speed: 10000 Power against spindle: 5.5Kw Bar clearance: 20mm Number of fixed rear tools: 6 Number of motorized rear tools: 3 Refrigerant Used: Neat Oil Bar loader model and brand: Robobar SBF - 532 Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 2400mm Width: 1380mm Height: 2050mm Weight: 3000kg

Gildemeister GD 16-5 - Top condition!, - Synchronized Guide bush, - 3off life tools slide 1, - rear working, - swarf conveyeor, - oil mist filter, - bar loader Iemca Smart 316

Ajan oxygen and plasma cutting machine 3000 mm x 18000 mm Power : 4 KW Machine is in excellent condition

Gebr. CNC longitudinal lathe Citizen L520-VII, YOC 2003 Control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Rod Ø max. 20 mm, Turning length max. 205 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Counter spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front hand, rear machining), parts conveyor belt, Fire extinguishing system Conveyor Loading magazine IEMCA BOSS 432r The machine can be viewed by appointment. Subject to changes and errors in the technical data and information as well as prior sale!

TSUGAMI BS12-III CNC Langdrehautomat TECHNISCHE DATEN Drehdurchmesser: 3-12 mm Drehlänge: 170 mm Max. Bohrungsdurchmesser: 7 mm Max. Innengewindedurchmesser: M6 Drehzahl: 12`000 U/Min Drehzahl, Gegenspindel: 6`000 U/Min Anzahl Achsen: 6 Abmessungen: ca. 190 x 130 x 220 mm Gewicht: 2200 kg Für die Richtigkeit, Vollständigkeit und Aktualität der Angaben wird keine Gewähr übernommen.

Tsguami BS18DE(S)-III CNC Drehautomat Anzahl Achsen: 6 Anzahl Spindeln: 2 Hauptspindel, Durchlass: 18 mm Verfahrweg: 210 mm Drehzahl: 10`000 U/Min C-Achse: 1° Gegenspindel: 18 mm Drehzahl: 8`000 U/Min Werkzeughalter: Siehe Foto Abmessungen: 195 x 125 x 220 cm Gewicht: ca. 2200 kg Für die Richtigkeit, Vollständigkeit und Aktualität der Angaben wird keine Gewähr übernommen.

Sliding head lathe Tornos Deco 26a :::BASIC INFORMATION::: SKU: 17C781 Machine Level: Standard Product name: Tornos Deco 26a sliding head lathe Category: Turning/Sliding head cnc lathes Brand: Tornos Model: Deco 26a Year of construction: 2012 Ad: 0 Final price: 30.000,00€ Availability: For sale :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 31i - model B5 Main spindle power: 7.5Kw Main spindle bar clearance: 26mm Headstock stroke (Z1): 240mm Main spindle speed: 8000 Number of linear axes: 10 Number of fixed tool holder plate positions: 6 Number of driven tool holder plate tool slots: 4 Number-of turrets-tool-slides: 1 Number-of tool-places-first-turret-slide: 4 Number-motorized-first-turret-slide: 4 Sub-spindle: yes Number of sub-spindle revolutions: 6000 Power against spindle: 3.7Kw Bar cleara ...

Sliding head lathe Star SR 38 Type A :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 31i model B Main spindle power: 11Kw Main spindle bar clearance: 38mm Headstock stroke (Z1): 320mm Main spindle speed: 7000 Number of linear axes: 7 Number of fixed tool holder plate positions: 14 Number of driven tool holder plate tool slots: 7 Rapid feeds for linear axes X Y Z: 36m/min High refrigerant pressure: yes External tank system with filter: yes Sub-spindle: yes Sub-spindle speed: 7000 Power against spindle: 5.5Kw Bar clearance: 38mm Number of motorized rear tools: 8 Coolant Used: Neat Oil Model and brand of bar loader: Iemca Boss 552-HD for 4 meter bars Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 2740mm Width: 1315mm Height: 2120mm Weight: 4300Kg

Key data: 200 mm, 420 mm

Control Traub TX 8 F Turning diameter / turning length 200 mm / 420 mm Spindle bore 42 mm Spindle speed range 10 – 5,000 rpm Machine weight approx. 4 t

Number of linear axes 6 Number of C axes 2 Total 25 tool stations 8 driven tool stations Max. workpiece diameter 20 mm Max. workpiece length 180 mm Max. bar capacity diameter 20 mm Controller Fanuc 32i With FEDEK (LNS) GT326 Bar feeder

CNC lathe sliding headstock STAR SR20R /// SR 20 R TECHNICAL CHARACTERISTICS: Year: 2000 NC Type: FANUC 18i-T Number of axes: 5 Max. length Machinable: 205 [mm] Max. diameter Turning spindle bar: 20 [mm] Max. speed Spindle: 8000 [RPM] C-axis indexing accuracy: 0.001 [°] Spindle power: 3.7 [kW] Max. diameter Counter-spindle bar: 20 [mm] Max. speed Counter Spindle: 4500 [RPM] C-axis counter-spindle indexing accuracy: 0.001 [°] Counter Spindle Power: 1.1 [kW] Number of end device positions: 4 Number of motorized end positions: 4 Number of comb positions 1: 6 Number of Comb 1 Motorized Stations: 4 Comb Rotating Tool Speed 1: 5000 [RPM] Number of counter-operation positions: 4 Number of motorized counter-operation positions: 4 Watering pan capacity: 155 [l] Supply voltage: 400 [V] RS232 port: Yes Hours Operating: 40920 [h] Weight: 2200 [Kg] EQUIPMENT INCLUDE ...

SPECIFICATIONS: 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 320 mm fixed

Inv. Num. : 5274 Type: OPTIMAT A 42 Producer: MAS Created: 2005 Parameters: Max. rod diameter: 42 mm Maximum bar length: 3000 mm Maximum spindle speed: 3520 1/min Number of tools: 6 pieces Total power requirement: 10 kW Weight: 2500 kg Equipment: Technical Documentation Collets Tool Holder Shovel Piece counter 4 cross slides Device for longitudinal turning on the first carrier of the machine driven by its own curved disc Equipment for guiding material bars IVT 50

NC sliding headstock lathe Star SE 16 FMB Minimag bar loader high pressure coolant pump, Control: Fanuc 21i-TB

Key data: 3200 mm, 12 mm, 170 mm

TSUGAMI BO12 (BE) SWISS TURN, 5-axis C+Y/12mm/ FMB loader magazine / CNC AUTOMATIC PUSHER, Control unit: FANUC LB1 Technical details BAR CAPACITY 3 mm to 12 mm, NUMBER OF CONTROLLED AXES 5 units. (X – Z1 – Z2 – C – Y) C-axis Y-axis Spindle speed feeder: 0 - 12.0000 rpm FMB Minimag 3200 / 3 meter bar feed / drive, German manufacture. Total weight of the machine with driver = 4,500 kg

Turning diameter 80 mm Bar diameter 20 mm Spindle speed 10000 rpm X1, Y1, Z1, X2,Z2 axes Controller Fanuc FANUC 160iB LNS barfeeder

Description: Machine number: K1216/1018 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 23 A Connection: 8 kVA Control: FANUC Travels: X: 62 mm Z: 200 mm Y: approx. 200 mm Travel X turret 2: approx. 550 mm Travel Z turret 2: approx. 100 mm Max. Bar capacity: 16 mm Incl. 4-fold drive for driven tools With a total of 18-fold tool turret Tool shank: 22 The machine is equipped with oil cooling and a bar loader from the manufacturer FMB Type: TURBO 2-18 control: FANUC, Approx. Onsite Dimension. (l x w x h): 7,000 x 1,100 x 1,700 mm, weight approx.: 2,500 kg

Tornos EvoDECO 16/10 CNC sliding head lathe CNC control Fanuc 31i-B5 Number of axles 10 Diameter of the spindle bore 16 mm Standard workpiece length with rotatable guide bushing 180 mm Spindle speed 0 - 12,000 rpm Spindle motor 12 / 9.8 kW Spindle speed counter Spindle 0- 12,000 rpm Minimum indexing C-axis main spindle 0.001° Minimum indexing C-axis counter spindle 0.001° Number of tools on the guide bush 10 | 2x 5 Positions of the tools on the guide bush 6 | 2x 3 Spindle speed driven tools 100 - 8,000 rpm Spindle motor driven tools 0.55 / 1.1 kW Number of tools on the end device 4 Positions for rotating tools on end attachment 3 Spindle speed driven tools 100 - 8,000 rpm Spindle motor driven tools 0.55 / 1.1 kW Number of tools in secondary operation 6 Spindle speed driven tools 100 - 8,000 rpm Spindle motor driven tools 1.5 / 2.2 kW Positions for Rotating Tools i ...

- Year 2007 - Double column - Cutting capacities: Round Ø 320 mm Square 320x320 mm - Smallest sawable section ø 10 mm - Minimum single-cut fall 6 mm - Min. cut-off height 15 mm - Programmable automatic feeder, stroke 750 mm, multiple up to 20000 mm. - Load capacity 1000 kg - Variable cutting speed from 20 to 110 mm/mn - Continuously variable cutting pressure - Continuously adjustable material clamping pressure from 20 to 60 bar. - Interchangeable carbide guide - Mechanical blade tension - Cooling system 3 nozzles, flow rate 40L/mn - Lighting system - Full documentation - Very good condition

Description: Operating hours with pick-up: ,20573 hrs. with bar feeder, type Haas Bar Feeder, Serial 158892, Chip conveyor, type P09.17M8736.01, Serial NP-12332927 serial number: 0095, Approx. Onsite Dimension. (l x w x h): 3,200 x 1,400 x 2,200 mm, weight approx.: 4,300 kg

Description: Operating hours with pick-up:Std. 111269 with bar feeder Haas Bar Feeder , Serial 158938, chip conveyor, type SPE63/12-250Z60MN30, Serial 045750-10.1 serial number: 10,430,003, Approx. Onsite Dimension. (l x w x h): 6,000 x 1,800 x 2,200 mm, weight approx.: 5,700 kg