cnc automatic bar used for sale

turning diameter:275 mm turning length:900 mm spindle passage:65 mm power capacity at 100 % load:25/20 kW spindle turning speed range:1 - 5000 U/min spindle diameter in front bearing:110 mm c-axis:1 - 500 U/min. number of workpiece supports:4 tool turret:1 x-axis:290 mm y-axis:165 mm z-axis:360 mm b-axis:360 ° rapid speed:18/30 m/min number of tools:2x2 + 2x2 number of driven tools:2x2 + 2x2 mm toolpiece turning speed range:8000 / 2000 U/min power capacity:25% ED 5,8 kW tool taper:TRAUB 60 tool turret:2/3/4 x-axis:170 mm z-axis:600/950 mm y-axis:+/- 60 mm rapid speed:18/15/30 m/min number of driven tools:10 mm toolpiece turning speed range:1 - 6000 U/min power capacity:25% ED 5,8 kW tool taper:DIN 69880 40 x 63 total power requirement:95 kW weight of the machine ca.:16 t dimensions of the machine ca.:10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and  ...

turning diameter:325 mm turning length:600 mm total power requirement:35 kW spindle drive:25 kW spindle turning speed range:5000 U/min speeds of tool:4500 U/min rapid traverse X-axis:60 m/min diverse toolholders:VDI 40 rapid traverse Z-axis:45 m/min weight of the machine ca.:6,5 t dimensions of the machine ca.:3,5 x 2,5 x 2,1 m Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor - collet clamping - part catcher

turning diameter:626 mm turning length:3000 mm Turning diameter:600 mm spindle bore:100 mm spindle turning speed range:2800 U/min weight of the machine ca.:18 t Machine overhold and retrofit in 2003 with SIEMENS 840 D control - NC steady rest - 12-fold revolving head - splash doors - tailstock - coolant device

turning diameter:445 mm turning length:2000 mm turning diameter over bed slide:660 spindle bore:65 mm spindle speeds::16 - 3150 U/min. rapid motion - x-axis:10 mm/min rapid traverse Z-axis:15 m/min total power requirement:34 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:6 x 2,5 x 2,2 m with CNC Control TX 8 D C-axis driven tooling 14 station turret head 3 jaw chuck dia. 315 mm tailstock, steady as NC-axis diverse driven toolholders diverse turning toolholders chip conveyor and coolant attachment

turning diameter:38 mm Article: CNC lathe Manufacturer: Hanwha Type: STL38H Year of construction: 2013 Control: Siemens 840SL for 8 axes Main spindle: max. turning diameter: 38mm; spindle bore max. 42mm, n max. 6,500 rpm Power max. 23 kW; C-axis with 0.001 degree; stroke Z1 320mm; synchronised guide bush unit; guide bush type JBS or SL38; type collet 173E / F48 Counter spindle: max. pick-up diameter: 38mm, n max. 6,500 rpm Power max. 23 kW; C-axis with 0.001 degree; stroke Z2 320mm; type collet 171E / F42 Tool turret: n max. 6,000 rpm Power max. 2.6 kW; Servo axes: X2, Y2, Z2; Stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120 Bar feeder FMB Turbo 5-55 High-pressure station SFB-301 eco 150bar Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

turning diameter:26 mm Article: High-precision CNC lathe with linear cross slide Manufacturer: Benzinger Type: GOFuture B1 Yob: 2015 Machine was only used for reworking, so only light machining work was carried out! Control: Siemens Sinumerik 840Dsl Main spindle: maintenance-free motor spindle Bar capacity: D26mm Chip processing container with coolant pump: 30l/min at 5bar Loading and unloading device type IB Additional gripper system for placing the workpieces in the correct position on the unloading conveyor Coaxial valve for coolant to the linear tools (3 pieces) Internal clamping device C-axis main spindle for digital control incl. Transmit function Adjusting microscope 16x magnification Coolant supply through the clamping cylinder of the spindle, sealing air, Speed increase of the motor spindle to 8,0000 rpm Nordmann tool monitoring Profibus master interface Hinged belt conveyor Kno ...

turning diameter:26 mm Article: High-precision CNC lathe with linear cross slide Manufacturer: Benzinger Type: GOFuture B1 Yob: 2016 Machine was only used for reworking, i.e. only light machining work was carried out! Control: Siemens Sinumerik 840Dsl Main spindle: maintenance-free motor spindle Bar capacity: D26mm Loading and unloading device type IB Additional gripper system for placing the workpieces in the correct position on the unloading belt Coaxial valve for coolant to the linear tools (3 pieces) Internal clamping device C-axis main spindle for digital control incl. transmit function Adjusting microscope 16x magnification Coolant supply through the spindle clamping cylinder, Sealing air, Speed increase of the motor spindle to 8. 0000 rpm Nordmann tool monitoring Profibus master interface Hinged belt conveyor Knoll Compact coolant device Knoll MBE interface Small fire extinguishin ...

CNC lathe GILDEMEISTER NEF 400 Year of Make: 2005 Control: Siemens 840 D Technical data Turning length: 650 mm Circumferential diameter over bed: 400 mm Circulation diameter over face slide: 270 mm Spindle bore: 65 mm Flat travel (X): 220 mm Longitudinal travel (Z): 700 mm Max. main spindle speed: 4,000 rpm Tool turret: 8-speed Machine weight: approx. 3,175 kg

Connection: 13 kW Control: HEIDENHAIN TNC 425 Table dimensions: 700 x 360 mm T-slots Number x width x distance: 3 x 18 x 110 mm Distance table to floor: 840 mm Max. table load capacity: 300 kg Travel X-axis: 960 mm Travel Y-axis: 380 mm Ball screw X and Y axis: 32 x 10 mm Pitch Diameter Distance table center to stand: min. 190 mm, max. 570 mm Spindle holder taper: ISO 40 Z-axis travel: 380 mm Spindle speed: 100 to 6000 rpm Rapid traverse: 15 m/min Positioning accuracy: +-0.01 mm Repeatability: +-0.005 mm Resolution: 0.001 mm incl. 16-fold tool changer Max. diameter for adjacent tools: 85 mm Max. diameter for free secondary positions: 135 m Max. tool length: 250 mm Permissible weight per tool: 6 kg max. total weight of the tools: 60 kg Attention: without the machine vise shown in the photos! Inkl. 3D touch probe Reference: Schönichen - Lot 23

Serial number: 1537001259A Operating voltage: 400 V Frequency: 50 Hz Connection: 17 kVA Rated current: 35 A Control: HEIDENHAIN TNC 620 Spindle speed: up to 12,000 rpm Max. spindle torque: 83 Nm Feed speed in X/YZ: up to 20,000 mm/min Rapid traverse in X/Y/Z: 30 m/min Setup operation in X/Y/Z: 20 - 2000 mm/min Travel X-axis: 635 mm Travel Y-axis: 510 mm travel distance Z-axis: 460 mm Displacement measuring system X/Y/Z: 1 μ Positioning uncertainty X/Y/Z: 6 μ Tool holder: SK 40 Table dimensions: 790 x 560 mm Spindle hours read with 5 grooves: approx. 5000 incl. 20-fold tool changer Attention: all tool holders located in the tool changer are included in the scope of delivery! Reference: Schönichen - Lot 47

Serial number: 07400003691 operating hours read: 88,040 Spindle hours read: 43,558 Spindle speed range: 3200/5000 rpm Rotation diameter: 270 mm Turning diameter: 120 mm Spindle distance: 900 mm Travel X1: 290 mm Travel Z1: 650 mm Travel X2: 180 mm Travel Z2: 650 mm Travel Y1: +- 40 mm Travel Z3: 670 mm Travel X3: 175 mm Max. rod diameter: 100/104 mm Spindle bore diameter: 118 mm Rapid traverse speed X- and Z-axis: 30 m/min Rapid traverse speed Y-axis: 15 m/min Number of driven tools per tool carrier: 12 Control: SIEMENS SINUMERIK 840 D POWERLINE incl. chip conveyor with 2 tool turrets - each with 12 tool positions main and counter spindles, as well as foot switches Attention, the machine has the following defects: -the B-axis is defective (sits on turret 1) -the guides and drives are worn according to their age-X2 axle (guide rails) runs a bit crooked in the range of 0.03 mm (would have  ...

Manufacturer: DMG (Deckel Maho Gildemeister) Year: 2006 Type: CNC Vertical Machining Center Numerical Control: Heidenhain TNC 530 Strokes: X 635 mm / Y 510 mm / Z 460 mm Spindle: 12,000 rpm Tool magazine: 32 positions Spindle center coolant: 20 bar Filtration: Cartridge filtration Tooling: No tooling supplied with the machine Weight (kg): approx. 6000 Notes: Multi-purpose CNC vertical machining center. Serial number included in the description.

Control: Siemens Acramatic A2100 Di Speed: 6,000 rpm Travel in X/Y/Z: 510/510/510 mm Spindle: Technology: Belt spindle Speed: 6,000 rpm Tool holder: SK40 Work table: Clamping area: 700 x 520 mm Table load (max.): 500 kg General: Tool magazine: 21 stations Rapid traverse in X/Y/Z: 24/24/24 m/min Equipment/accessories: Chip management: chip tray Coolant management: IKZ pump with filter and high pressure Tool Measurement: Pushbutton, Renishaw TS27R Setup operation: Electronic handwheel Other equipment: Div. gebr. Tool holder and 1 pc. machine vice (Allmatic HD 125), transformer ATTENTION: The machine is not wide and is sold as a parts carrier. According to the dispenser, the control (board) is defective.

CNC Control: FANUC series O-M Axis strokes: X 600 mm / Y 420 mm / Z 450 mm Table: 750 × 400 mm Spindle speed: 6000 rpm Spindle power: 13 kW Spindle taper: ISO 40 Tool changer: 30 positions Included equipment: NIKKEN 4th axis divider Ø 250 mm Year: 1989 Manufacturer: SIGMA Lots sold as is, unchecked, without tools or tool holders.

Manufacturer: FAMUP Year: 1994 Type: CNC vertical machining center Numerical control: FANUC Series O-M Strokes: X 600 mm / Y 400 mm / Z 400 mm Table: 400 × 400 mm – max. load 300 kg Spindle: ISO / SK 40 – 6,000 rpm – 11 kW Tool magazine: 18 positions – Max. tool Ø 75 mm – changeover time 2 s Chip conveyor: Yes Dimensions (mm): 3200 × 2900 × 2600 Weight (kg): approx. 3500 Notes: Italian-made CNC vertical machining center, suitable for general milling. Lots sold as is, unchecked, without tools or tool holders.

CNC lathe for turning and machining metal parts. CNC control: Traub TX 8 Max. turning circle: 275 mm Max. turning length: 450 mm Bar pass: 65 mm Chuck diameter: 210 / 250 mm Bench inclination: 40° Spindle speed: 0 – 4,000 rpm Spindle nose: A2-6 Spindle motor power: 11 / 18.5 kW C-axis: 0.001° with hydraulic brake Turret: 12 positions VDI 30 Motorized tools: 4,000 rpm – 4.4 kW Fast feeds: X 15 m/min / Z 20 m/min

CNC milling machine Type: BT 1500 Manufacturer: Style Year: 2012 X: 1500 mm Y: 650 mm Z: 600 mm Max spindle speed: 8000 rpm With accessories Machine weight: 4300 kg Machine in good condition, under power. Find more here - / Contact us at -

A CNC vertical machining center Sigma is available. Travel X/Y/Z: 850mm/480mm/580mm, table dimensions X/Y: 1000mm/540mm, max. table load: 7000kg, tool positions: 40, tool holder: SK40, speed: 12000rpm, power: 15kW, torque: 15kW. Machine dimensions X/Y/Z: approx. 3900mm/2200mm/2850mm, weight: approx. 6500kg, control: Heidenhain TNC 426M, operating hours: approx. 15855h. Including chip conveyor and internal coolant supply. Documentation available. An on-site inspection is possible.

Excellent condition - Fully operational - Loading / Transport possible!

Lathe Hurco TM8i no defects , energized

Key data: 320 mm, 305 mm, 5000 1/min

FANUC i Series Control 12-station turret (not driven) Travel X= 175, Z= 330 mm Bar Passage 51 mm Tailstock Chip tank IEMCA BOSS 545/32 E Bar Feeder

Excellent condition - Fully operational - Loading / Transport possible! • CNC hydraulic press brake • Total installed power 12.50 KW • Maximum bending force 1300 KN (132 T) • Maximum pressure 300 Bar • Maximum working length 3140 mm • Maximum distance between uprights 2700 mm • Throat depth 420 mm • Maximum stroke 200 mm • Table width 90 mm • Approach speed: 1 - 100 mm/sec • Working speed: 1 - 10 mm/sec • Return speed: 1 - 100 mm/sec • AMNC control • Various accessories are included • Transport dimensions 5000 x 2060 x 2850 mm

Table dimensions ( x-y/mm) 3000 x 6000 Stroke ( X/mm) 7000 Stroke ( Y/mm) 3200 Stroke ( Z/mm) 1500 Type of controll heidenhain tnc 640 Number of spindle per minute 18000 Chuck connection hsk a 63 Type of head universal automatic bi-rotary Advances 50.000 mm/min Tools connection iso 50 Height ( x/mm) 5380

Excellent condition - Fully operational - Loading / Transport possible! new drive boards (from 2020), 12-fold tool changer (driven), driven C-axis, VDI30, tailstock programmable, tool measuring arm T18, oil mist extraction, Chip Conveyor, high pressure pump, Turn Plus (graphic programming), control: HEIDENHAIN turning diameter: 570mm, turning diameter over bed slide: 420mm

Excellent condition - Fully operational - Loading / Transport possible! Technical details turning diameter 340 mm Turning length 250 mm serial number 03105116 X-Motion 260 mm Z-Motion 520 mm Read off working hours 33,619 h Read off operating hours 45,618 h C-axis simultaneously controllable No Accessories included Yes Integrated C-axis No control OKUMA OSP-U100L number of controlled axes 2 Spindle Bore 62 mm tool taper VDI 40 Turning Speed Range 45-4500 rpm

Specifications Manufacturer: WAFIOS Model / Type: BMZ 42 Machine Number (SN): 27681075 Year of manufacture: 2015 Plan number: 7681 2 9000 75 Power supply: 3~400V Frequency: 50Hz DC Control Voltage: 24V DC AC Voltage: 230V AC Rated Current: 11A Protection: 25 A Equipment Pipe feeder Buffer Unit Workpiece Reception System Pipe Rotation Unit Bending module Workpiece Placement System Output tape Mesh Fence Light barrier system Separate operator terminal Monitor and remote control Workshop cabinet with sliding door Workshop trolley with 5 drawers Hand tools and additional equipment included Pipe diameter: max. 12.7 × 1.5 mm with a tensile strength of max. 600 N/mm² Rod Length: 150-2000 mm Bending head stroke (Z axis): up max. 25 mm down max. 120 mm