130,507 used machines on RESALE, but how to find them? Machine Search
The machine is in good technical condition, after prior agreement it is possible to test it. The machine has been out of operation for about a year. Regular branded service worth €5,000 (we can document it) was last performed at the end of 2023, after which the machine was in limited operation. It is necessary to determine the condition of the screws and repair it if necessary. It is necessary to calibrate the 5-axis indexer. The spindle makes a loud noise.
Working dimensions X/Y: 2000mm/1500mm, max. clearance height: 70mm, max. material width: 1690mm, speed: 2m/min, acceleration: 18m/s², resolution: 0.001mm, accuracy: +/-0.05mm, repeatability: +/-0.05mm, laser source: Rofin ScX series 300W, laser class: 1, laser power: 300W. The laser source is defective. Including shuttle table, cooling unit, hydraulic unit and register mark recognition camera. Documentation available. An on-site inspection is possible.
Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-s ...
Key data: 65 mm, 660 mm
Control: SIEMENS Spindle passage: 65 mm Max. speed: 6,000 1/min Sub-spindle Z= 700 mm TOOL CARRIER 1 with milling spindle Milling spindle: 7,200 1/min B-axis 360° 14 stations with powered tools Speed Tools 7,200 1/min Travel: X= 230 / Y= +- 65 / Z= 845 TOOL CARRIER 2 14 stations with powered tools Speed Tools 7,200 1/min Travel: X= 140 / Y= +- 45 / Z= 810 Chip conveyor Filter Bar feeder INDEX MBL
CNC vertical machining center Type: DMU 80 T Manufacturer: Deckel Maho Year: 2003 Control: Heidenhain TNC 530 X: 810 mm Y: 650 mm Z: 650 mm Table: 1250 x 710 mm Magazine for 30 tools SK40 clamping and tools Internal cooling through the spindle center 40bar External emulsion tank with separator 600l. Max spindle speed 12000 rpm Ethernet interface for networking the machine Internal/external air pressure cooling New motherboard with SSD - the machine loads programs quickly and can use rapid traverse machining New spindle in 8/2023, from exchange 300 hours Find more here - / Contact us at -
CNC vertical machining center Type: DMU 80 T Manufacturer: Deckel Maho Year: 2002 Control: Heidenhain TNC 430 X: 900 mm Y: 650 mm Z: 600 mm Spindle speed: 8000 rpm Spindle taper: SK40 Tilting spindle, can be folded and used as a horizontal boring machine Table: 1100 x 650 mm Tool magazine: 24 positions Through spindle cooling 40 bar Chip conveyor Machine in good condition, under power Find more here - / Contact us at -
CNC vertical machining center Type: MCV 800 QUICK Manufacturer: MAS Year: 2018 Control: Heidenhain TNC 620 X: 800 mm Y: 500 mm Z: 550 mm Table: 1000 x 500 mm Max table load: 600 kg Spindle speed: 12000 rpm Spindle cone: ISO 40 Tool magazine: 24 positions Workpiece + tool probe Heidenhain TS/TT 460 Central automatic lubrication Cooling through the spindle center (20 Bar). Machine in good condition, under powet Find more here - / Contact us at -
CNC lathe Type: GA-360 LM Manufacturer: Goodway Year: 2005 Control: Fanuc Series Oi-TC Max turning diameter: 500 mm Max turning length: 1200 mm Clamping head: 100 mm Swing over bed: 700 mm Spindle bore: 75-105 mm Chuck size: 15" LM driven tools with milling function (C-axis) Driven tool motor: 7 hp Spindle motor: 30 hp Revolver head: 12 VDI 3-jaw chuck Chip conveyor Tailstock Machine in good condition, under power Find more here - / Contact us at -
Fiber laser cutting machine Type: G 3015 MF Manufacturer: Hans Year: 2018 CNC control: Hans 701 Pro Exchange tables 3 m x 1.5 m X: 3050 mm Y: 1530 mm Z: 250 mm Laser source: IPG 3000 W Laser type: Fiber Laser head: Precitec Machine weight: 8,000 kg Max. workpiece weight: 750 kg Sheet metal cutting thickness: steel 15 mm stainless steel 10 mm aluminum 6 mm brass 5 mm Machine in good condition, under power Find more here - / Contact us at -
MIKRON WF 3 DCM Universal Milling Machine Heidenhain TNC 151 control Table 800x380 mm x-travel 500 mm y-travel 500 mm z-travel 400 mm speed range 3150 rpm drive power 4 kW SK 40 Weight 1700 kg Many Accessories and tools
CNC lathe DMG MORI NLX 2000 SY/500 With DMG MORI M730 UM MAPPS CELOS CONTROLLER Year of Make: 2016 Max. workpiece diameter: 366 mm Max. workpiece length: 510 mm Travel in X: 260 mm Travel in Z: 590 mm Travel in Y: +- 50 mm Spindle bore: 65 mm Main spindle speed range: 4000 rpm Speed range sub-spindle: 6000 rpm Speed range of driven tools : 10000 rpm With the following accessories: Workroom door with interior lighting 20-fold turret with 20 driven stations C Axis , Y Axis Touch Probe ( Marposs ) Sub-spindle, parts catcher Tool presetter manual ( HS ) Collet Chuck Hydraulic with Foot Pedal (HS) Collet Chuck Hydraulic with Foot Pedal (GS) Bar Feeder LNS Move S2 30 tool holders Various powered tools Direct displacement measuring system X, Y, Z axis Signal lamp 4 colours Chip conveyor Coolant Setup Operating Instructions
This HONESS V250-3000 was manufactured in 2002. A profile punching machine for tubes and profiles, it features a self-centering product clamp and interchangeable clamping jaws for various tube types. It can handle tubes up to 100 mm wide and 80 mm high, with a maximum punching diameter of 40 mm. Ideal for high-speed punching with a carriage travel speed of 40 m/min. Contact us for more information about this machine.
Used HERMLE UWF 1202 S Universal Tool Barrel and Drilling Machine CNC control HEIDENHAIN TNC 426 Technical data: Travels X-axis 850.0 mm Y-axis 630.0 mm Z-axis 500.0 mm Rapid traverse 10 m/min Table length 1200.0 mm Table width 550.0 mm Max. spindle speeds 20 - 4200 rpm Spindle motor power 7.0 kW Tool holder SK 40 Coolant 120 liters Total connection 16 KW Dimensions 3.3 x 2.4 x 2.4 m Space requirement 5.0 x 4.2 m See still under power
CNC vertical machining center Type: MAG CFV-1300i Manufacturer: Cincinnati Year: 2010 Control: Heidenhain TNC 530 X: 1300 mm Y: 540 mm Z: 720 mm Maximum table load: 1000 kg Max spindle speed: 9000 rpm Tool magazine: 24 positions Internal cooling Chip conveyor 4 pcs hydraulic vices Tool holders SK40 approx. 24 pcs New spindle In good condition, under power Find more here - / Contact us at -
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 40 eVo linear With Siemens 840 D sl Operate path control Year of Make: 2016 Travel: X 400 Y 400 Z 375 Speed range: 20 – 20,000 rpm infinitely variable With the following accessories: NC swivel rotary table 450 mm x 400 mm incl. table cooling 60-fold tool changer with double gripper ( HSK 63 ) 3 D Probe Heidenhain Electronic handwheel IKZ 40 bar with paper belt filter Scraper Chip Conveyor Bed Wash Active cooler for control cabinet Spindle Cooling: Water Circulation Cooling Rotoclear Direct displacement measuring system Blowing air d.d. spindle center 3-Piece Height Adjustable Machine Shoes Operating Instructions
CNC vertical machining center Type: Vesta-1000 Manufacturer: Hwacheon Year: 2016 Control: Fanuc Series 0i-MD X: 1000 mm Y: 550 mm Z: 500 mm Distance table-spindle: 130 – 630 mm Working surface: 1100 × 502 mm Table load capacity: 700 kg Spindle speed: 12000 rpm Rapid traverse (X / Y / Z) m/min 36 / 36 / 30 Working feed (X / Y / Z) mm/min 1 – 24,000 Feed motor (X / Y / Z) kW 1.8 / 1.8 / 3.0 Automatic Tool Changer Tool taper: BT40 Tool changer: 24 positions Cooling through the center of the tool 30 bar Power consumption: 30 kVA Coolant tank capacity: 380 l Chip conveyor 4th axis TSUDAKOMA Wireless workpiece probe + tool probe. Dimensions:3335 × 2200 x 2670 mm Weight: 6500 kg Machine in good condition, under power Find more here - / Contact us at -
Key data: 3000 mm, 4000 mm, 1500 mm
Heyligenstaedt Heynumill 2700-PF 3/5 axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Hsbi Ssyaazmsf Iwxonh Control Heidenhain TNC 430 X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm At Heynumill, the complete hydraulics were renewed in 2018, all electrical cables were replaced, the spindle cooling unit, both longitudinal conveyors were renewed and the heads were completely overhauled. The entire repair cost €160,000. In 2020, the milling gear was renewed.
CNC lathe TAKAMAZ EX 20 / Fanuc 15 TF -Control FANUC 15 TF -Turning diameter max. 260mm -Turning length approx. 500mm -Rod passage 42mm -Spindle speeds 40 - 4000 rpm -Spindle nose A2-6 -Tool positions (stations) 12 compartment / direct mount -Tool measurement (Tooleye) -Parts catcher -Tailstock -Collet holder 173 E -Spindle motor 7.5 KW Dimensions: LxWxH 2.6x2x1.8 meters / Weight : 2800 kg
TSUGAMI MA 3 H - 10P Horizontal Machining Center 10 - Compartment Pallet Changer -Control FANUC 11-M -Travel X/Y/Z 340x260x400mm -10 - Compartment pallet change -B - Axis 360 DEGREES -Indexing 0.001mm -Speed range 36-5000 rpm -Feed range 1-6000 mm/min -Rapid traverses 12/meter-min -Tool holder BT 40 -Double-arm gripper -Tool magazine 62 stations -Drive power / spindle motor 7.5 KW -Electronic handwheel -Chip conveyor -Central lubrication -Coolant device -RS 232 data interface -Spindle oil cooler -Documentation Dimensions: LxWxH 4x2.4x2.4 meters / Weight 7000Kg
EUMACH MC 1050 P vertical machining center -CE marking -Built in 1999 -Heidenhain 426 -Fourth axis NIKKEN CNC 170 ZA / programmable directly from the controller -Oil cooler -Complete documentation -COMPLETE TECHNICAL DATA - SEE PHOTOS Dimensions: LxWxH 2.8x3.45x2.8 meters / Weight 6500Kg
Travel ranges working area 1: X: 6450mm, Y: 1535mm, Z: 250mm, working area 2: X: 6200mm, Y: 1535mm, Z: 250mm, working area 3: X: 6200mm, Y: 1520mm, Z: 275mm, axis travel configuration 1: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 2: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 3: X: 6820.5mm, Y: 1963mm, Z: 663mm (5-axis head), Z: 350mm (additional machining units), control: Biesse XP600. Maintenance: complete C-axis was replaced in 2015 including accessories, vacuum pump was fully replaced in 2016 including bellows, hoses and additional components, in 2021 the machine was equipped with a new high-performance control PC running a current Windows 10 operating system. With extensive documentation. An on-site inspection is possible.
The machine is in good technical condition, testing is possible after prior agreement. Pressing force: 35 tons • Working length: 1250 mm • Control system: CNC (precise adjustment of angles and stops) • Condition: Fully functional, currently not connected. Main advantages: • High accuracy: Stable frame and precise positioning for high-quality bending. • Compact dimensions: Ideal solution even for smaller workshops and operations. • Accessories: The sale includes the equipment visible in the photos.
CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2006 CNC Control: Global Control Working area: 3 x 12 m Track width: 4,000 mm Track length: 15 m Extraction table 1 x Plasma torch with Hypertherm HPR260 1 x Plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filter system
Offered is a travelling column machining center: rotary table: 1500mm, travels X/Y/Z: 1600mm/800mm/800mm, tool holder: SK50, spindle drive: 60kW, speed range: 20 to 6000rpm, tool changer: 30 positions, machine weight approx. 19200kg, machine dimensions X/Y/Z approx. 6000mm/4000mm/3200mm. Incl.: internal coolant supply, chip conveyor, chip flushing system, approx. 60 pieces SK50 tool holders, 3-jaw chuck. Inspection possible by arrangement.
X-axis: 750mm, y-axis: 600mm, z-axis: 520mm, C-axis: 360°, B-axis: 180°, max. spindle speed: 18,000/min, control: Siemens SINUMERIK 840D powerline, connected load: 55kVA, length: 4603mm, width: 5250mm, height: 2785mm, weight: approx. 9t, operating hours power on: approx. 65,000h, spindle hours: approx. 19,000h. No defects known, internally maintained, without maintenance reports, with documentation, rotary table, high-pressure internal cooling and Bluhm spindle probe. An inspection on site is possible.
Key data: 350 mm, 700 mm
DMG Mori NLX2500SY/700 Manufactured on 2013 and put into operation on 2014. ZAchse: 700mm, Y-axis 100mm, turning diameter approx. 350mm. Spindle passage 70mm. Operation hours 5353 hours only as new C Axis Y axis B axis 3 Powered Wkz Collets feeder extra included Measuring arm Fully equipped See pictures Immediately available
CNC lathe Type: TMM8i Manufacturer: Hurco Year: 2018 Control: Hurco WinMax 5 X: 198 mm Z: 508 mm Max turning diameter: 256 mm Swing over bed: 525 mm Swing over cross slide: 300 mm Max spindle speed: 4 800 rpm Spindle power: 13.2 kW Spindle nose: A2-6 Bar capacity: 50–52 mm 12-station servo driven turret Tool standard: VDI 30 (bi-directional indexing) Live tooling options available for milling/drilling operations Driven tools Tool probe Tailstock Chip conveyor Bar feeder: Samsys Multi 3000 Machine in good condition, under power Find more here - / Contact us at -
WE SELL AN NICE CONDITION HERMLE C40U FULLY EQUIPED WITH COMPLETE FULL TOLS ACCESSORIESS MACHINE IS WORKING IN PRODUCTION DAILY ORDERS. THIS IS AN VERY NICE OPORTUNETEY MACHINE WILL BE AWAILIBLE IN NEXT WEEKS FOR PICKING UP TECHNICAL DATA: x-travel 850 mm y-travel 700 mm z-travel 500 mm Control HEIDENHAIN iTNC 530 rotary table 800 mm c-axis 0.001º ( ±360º) 0 B-axis (table) º mm number of spindle speeds 18.000 U/min/rpm tool taper SK 40 DIN 69871 spindle drive 15 kW max. torque on the spindle 130 Nm Tools changer 38 fach/tools handwheel HR- 410 total power requirement 41 kVA weight of the machine ca. 10,5 t EQUIPMENT: MACHINE WILL COME EQUIPED WITH COMPLETE WORKING PLACE , WITH ALL COMPLETE TOOLS AND ACCESSORIESS. COMPLETE TOOLINGS COMPLETE CUTTING TOOLS COM ...
Key data: 250 mm, 500 mm, 3800 1/min
The machine is in good condition and fully functional. It can currently be visited under power. Included is the hydraulic three-jaw chuck, furthermore it has a hydraulic tailstock which is movable. The machine does not have a chip conveyor, but it does have a chip tray.
This 4-axis Weeke Optimat BP 145 was manufactured in 2000. A robust CNC processing center, it offers advanced capabilities for precise and efficient machining. Ideal for those looking to enhance their production with a reliable used machine. Contact us for more information.
This HOMAG Optimat BAZ41/30/K Event was manufactured in 2002. A used CNC processing center with a working area of 3000 x 1050 mm. Consider the opportunity to buy this HOMAG Optimat BAZ41/30/K Event CNC processing center. Contact us for more information.
This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information.
This 3s Finn-Power C5 + Compact Express CNC punching machine was manufactured in 2007. It features a working area of 2500 Ã 1250 mm and a punching force of 30 tonnes. With 20 tool stations and a maximum tool diameter of ~89 mm, it offers efficient operation. Consider the opportunity to buy this Finn-Power C5 + Compact Express CNC punching machine. Contact us for further details.
This 5-axis COSMEC CONQUEST 515/13 was manufactured in 2019. A robust CNC Wood Machining Centre, it features a working area of 6210 Ã 1650 mm, dual motorization on a closed gantry structure, and a spindle power up to 18 kW. It supports tool changes with multiple configurations and is compatible with ALPHACAM and ASPAN software. Consider the opportunity to buy this COSMEC CONQUEST 515/13 CNC Wood Machining Centre. Contact us for more information about this machine.
This 5-axis BIESSE Rover PLAST A FT 1536 was manufactured in 2020, featuring a robust electro-welded base and high-precision movement systems. It boasts a main electrospindle power of 13.2 kW, a programmable rotation speed up to 24,000 RPM, and an 8-position revolver tool magazine. Ideal for intricate woodworking, it includes a 21.5 LCD monitor and Industry 4.0 integration. Consider the opportunity to buy this BIESSE Rover PLAST A FT 1536 CNC Wood Machining Centre. Contact us for more information.
This 3-axis MORBIDELLI UNIX KBT was manufactured in 2009. It features a CNC control system, a working area of 3000 Ã 1000 mm, and a maximum panel thickness of 60 mm. Equipped with multiple drilling and milling units, including 24 vertical and 4 horizontal spindles, it also has a fixed saw unit and supports both manual and automatic panel handling. Consider the opportunity to buy this MORBIDELLI UNIX KBT CNC Wood Machining Centre. Contact us for more information.
This 3-axis SCM PRATIX 25 CNC Wood Machining Centre was manufactured in 2015. It features a large working area of 3100x1550 mm, a 5-axis milling head, and dual tool changers with 10 and 16 positions. Equipped with a powerful 16.5 hp motor and a vacuum pump capacity of 100 m³, it supports HSK F63 clamping and Xilog Plus software. If you are looking to get high-quality milling capabilities consider the SCM PRATIX 25 machine we have for sale. Contact us for more information.
This 4s FORMAT4 Profit H200 13.33 was manufactured in 2019. It features a CNC portal machining center with a working area of 4000 mm in the X-axis and 1670 mm in the Y-axis. The machine is equipped with an electrospindle power of 12 kW and a tool magazine with 12 positions. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 Profit H200 13.33 machine we have for sale. Contact us for further details.
Key data: 250 t, 4100 mm
6 Axis Byvision / Laser Guards
This 3s HOLZHER dynestic 7507 was manufactured in 2017. It features an X-Axis stroke of 3100 mm or 4100 mm, a Y-Axis stroke of 1560 mm, and a Z-Axis stroke of 320 mm. The machine offers a vector speed of 110 m/min and a main spindle power ranging from 6 kW to 12 kW. If you are looking to get high-quality CNC wood machining capabilities, consider the HOLZHER dynestic 7507 machine we have for sale. Contact us for further details.
Fabricante JUARISTI Modelo TS-5 MG 20 5 EJES Año 1996 CNC HEIDENHAIN TNC-430 CA Mesa Superficie de la mesa 2.000 x 2.500 mm. Tipo mesa Juaristi MG-20 Peso admisible sobre mesa 20.000 kg. Giro mesa (Eje B) Continuo (0.001º) Ejes Curso trasversal (Eje X) 5.000 mm. Curso longitudinal (Eje W) 2.000 mm. Curso vertical (Eje Y) 2.500 mm. Curso axial (Eje Z) 800 mm. Ejes controlados X, Y, Z, W, B Avance rápido ejes 10.000 mm/min Cabezales Diámetro de la caña 150 mm. Cabezal universal 45º manual INCLUIDO Cabezal salida directa INCLUIDO Cono ISO 50 Número de gamas 2 Velocidad cabezal 0-2.000 rpm Gama baja 12 – 732 r.p.m. Gama alta 733 – 2.000 r.p.m. Giro a par constante 12 – 183 r.p.m Giro a potencia constante 183 – 2000 r.p.m. Potencia de cabezal 37 kW Equipamiento Refrigeración externa INCLUIDO Volante portátil HEIDENHAIN HR-410 Herramientas y ...
This 3-axis KOMPAS F 2030 Industry was manufactured in 2019 and features a 3000x2000mm working area. It includes an automatic Mach3 CNC control for feeding, sawing, and milling, with a maximum speed of 10,000 mm/min. The machine is equipped with a 3 kW milling motor, angle-adjustable circular saw, pneumatic clamping, and a chip extraction system. If you are looking to get high-quality milling capabilities, consider the KOMPAS F 2030 machine we have for sale. Contact us for more information.
This 3-axis BIESSE ROVER J FT 1224 was manufactured in 2017, featuring a working area of 2400 mm by 1200 mm. It includes a CNC electrospindle with a maximum speed of 24,000 rpm, and a flat vacuum table ideal for routing, drilling, and panel machining. Consider the opportunity to buy this BIESSE ROVER J FT 1224 CNC Wood Machining Centre. Contact us for more information about this machine.
This 5-axis FORMAT4 Profit H500S 16.56 was manufactured in 2016. It features a large working area with dimensions X=5540 mm, Y=1570 mm, Z=350 mm, and is equipped with a 5-axis main spindle. The machine includes a drilling head with 12 vertical and 6 horizontal drilling spindles, a grooving saw unit, and a motor controlled via inverter up to 7,500 rpm. It also has two tool changers and a Becker vacuum pump. Contact us for more information about this machine.
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P hi-dyn With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 800 Y 600 Z 700 Speed range: 0 – 12,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Swivel rotary table 0 630 mm Swivel milling head ( Horizontal + Vertical ) Universal tool changer with 60 magazine positions as a double gripper ( SK 40 ) Full protection cabin with sliding doors and interior lighting 50 pcs SK 40 tool holders IKZ – 40 bar Chip conveyor Rotoclear 3 D Probe Heidenhain Electronic handwheel Operating mode 3 + 4 3-Piece Height Adjustable Machine Shoes Operating Instructions THE MACHINE COMES FROM AN INSTITUTE AND IS IN TOP CONDITION POWER-ON HOURS: 29496 hrs PROGRAM HOURS: 10050 hrs.
Key data: 700 mm, 5050 mm
CNC Turning Milling Center Manufacturer: Doosan Type 700XLY ll Year of construction 11/20 IBN 2021 Control Fanuc iSeries Plus max. turning length 5050mm max. turning diameter 900mm 12-fold tool turret, all 12 of which are driven Full Y-axis and C-axis Switch-on hours approx. 25,000 on 22.05.25 Spindle hours approx. 5,000 on 22.05.25 Machine is in a very good condition. As accessories there are A large bezel SMW Three-jaw chuck 630mm Face Plate 800mm div. Powered Tools Various steel holders Accessories had cost 80,000 euros Machine is sold due to the poor order situation
Maho MH-C 700 All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Horizontal BAZ DECKEL MAHO DMC 60 H Linear with 2-fold pallet changer and 180 magazine locations Year of Make: 2009 Control: Sinumerik 840D Technical data: Spindle speed: 0-18,000 min-1 Drive power: 35KW Torque: Spindle mount: HSK 63 Number of magazine slots: 180 pieces Number of pallets: 2 Pallet size: 500x500mm Travels: X-axis: 630mm Y-axis: 800mm Z-axis: 650mm C-axis: 0.001° All axes have linear actuators Accessories: -Coolant system -Chip conveyor Machine was regularly serviced Video available on request.
maximum number of results exceeded
please refine your search
