cnc atc used for sale

Travel X/Y/Z: 350mm/250mm/256mm, travel U/V: +/-70mm, max. taper angle: 30°, max. height: 100mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 750mm/550mm/150mm, max. workpiece weight: 200kg, max. threading height: 250mm, wire tension: 25N. Machine dimensions X/Y/Z: approx. 1650mm/2050mm/2250mm, weight: approx. 2600kg, control: Agievision. Documentation available. An on-site inspection is possible.

Number of axes: 3, table dimensions: 1210x267mm, max. spindle speed: 4000rpm, weight: approx. 2t. An on-site inspection is possible.

A CNC punching and laser cutting system Amada is available. Laser resonator: C-4000A, travel path X/Y: 2500mm/1250mm, laser power: 4kW, laser type: CO2, max. laser gas pressure: 4bar, max. cutting capacity: steel/stainless steel/aluminum: 25mm/15mm/10mm. Machine dimensions X/Y/Z: approx. 5700mm/2500mm/2300mm, weight: approx. 6400kg, control system: Amada. Including transformer TG515 (70kVA), cooling block, extraction system Keller Vario and beam path purging system Alphapac. Documentation available. An on-site inspection is possible.

Key data: 324 mm, 600 mm

Control: HEIDENHAIN CNC Pilot 4290 Max. spindle speed: 5,000 1/min C-axis Max. bar passage: 65 mm Travel: X= 260, Z= 630 mm 12-station turret (all driven, max. 4,500 rpm) Tailstock Tailstock stroke: 580 mm Chip conveyor Dimensions LxWxH: 3500 x 2440 x 2100 mm (without chip conveyor) Weight: 6,000 kg Switch-on hours: 32,600 h Spindle hours: 7,600 h

This 3-axis SCM Accord 20 CNC router was manufactured in 2010. It features a working area with dimensions of 4250 mm in the X-axis and 2280 mm in the Y-axis, making it suitable for nesting production and wood processing. The machine includes a powerful electrospindle with a speed range of 600 to 24,000 rpm and a side tool magazine with 10 positions. If you are looking to get high-quality milling capabilities, consider the SCM Accord 20 CNC router we have for sale. Contact us for further details.

This 3-axis SCM PRATIX 48 NST was manufactured in 2003. It features a working area of approximately 1220 x 2440 mm and is equipped with a vacuum nesting table. The machine includes an HSK electrospindle with a power range of 7.5–9 kW and a tool changer, either linear or side-mounted. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM PRATIX 48 NST machine we have for sale. Contact us for further details.

For sale Doosan Multi Task CNC turning center type MX2100LST with a Fanuc 31i-A controller. This Doosan MX2100LST is a high-quality, multifunctional 9-axis CNC turning/milling center. The machine combines the functions of a CNC turning and machining centre in a single clamping (turning-milling). Capacity & Working Area Maximum turning diameter: 540 mm Maximum turning length: 1,540 mm Maximum diameter over bed: 750 mm Maximum diameter over thrust axis: 650 mm Spindles (main and counter spindle) Both spindles offer identical performance and thus enable the symmetrical transfer and machining of workpieces: Lift Plate Size: 8 inches (optional 10 inches) Maximum speed: 5,000 rpm Spindle motor power: 22 kW Spindle bore / Maximum rod diameter: 65 mm. C-axis resolution: 0.001 degrees (on both spindles) Milling spindle (B-axis head) The upper processing head is a fully controll ...

Hours in picture. 1999 DMG (Deckel Maho) DMU 80 T is a high-precision CNC universal milling machine. It was a staple in toolrooms and production shops at the turn of the millennium because it bridged the gap between a standard 3-axis mill and a full 5-axis machining center. In the late 90s, the T series stood for Table, featuring a large fixed table with a swiveling milling head, making it incredibly versatile for large or heavy workpieces Find more here - .ucymachines/ Contact us at - sales@ucymachines

Number of axes: 3, max. speed: 6000rpm, compressed air connection: 6-8bar, main motor power: 20HP, control system: Fanuc Series 18-M, weight: 12t, without documentation. An on-site inspection is possible.

This 4-axis BIESSE Rover A 1232 was manufactured in 2021. It features a working area of 3140 mm in the X-axis, 1260 mm in the Y-axis, and a Z-axis travel of 245 mm. The machine is equipped with an electrospindle power of 13.2 kW and a maximum tool diameter of 113 mm. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover A 1232 machine we have for sale. Contact us for further details.

Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible.

CNC Wood Machining Centre manufactured in 2000. This SCM Windor 60 features multiple vertical profiling spindles and an integrated drilling unit, designed for complex wood profiling and drilling operations. It includes a dedicated window profile machining setup and a multi-station tooling arrangement. If you are looking to get high-quality wood machining capabilities, consider the SCM Windor 60 machine we have for sale. Contact us for further details.

A bed milling machine is offered. Spindle drive: 25kW, table clamping surface X/Y: 1250mm/500mm, travel paths X/Y/Z: 1000mm/500mm/600mm, tool holder: ISO 40, feed rate: 0mm - 3000mm/min. Equipped with CNC control, coolant system, electronic handwheel, machine weight: approx. 4200kg, machine dimensions X/Y/Z: approx. 2800mm/2400mm/2500mm. Inspection possible by arrangement.

Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Peripheral grinding wheel speed (m / s): Variable with regulator, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Dressing (auto / manual): Automatic CNC the 2 grinding wheels, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Cnc axes nº: 8, Infeed (auto / manual): Automatic, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 75 Kw, Power hydraulic motor: 3 Kw, Accessories included: Fairing, rule holder and plongeé, MARPOSS E50 meter, speed regulator. grinding wheel work, Total power: 90 Kw, Voltage: 220 / 380V, Lo ...

CNC vertical machining center Type: DMC 1035 V ECOLINE Manufacturer: DMG MORI Year: 2012 Control: Siemens Sinumerick 840D Total hours: 12,058 Spindle hours: 5,039 X: 1035 mm Y: 560 mm Z: 510 mm Working table: 1200 x 560 mm Tool magazine: 20 positions Max spindle speed: 8,000 rpm Chip conveyor Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Number of T-slots: 8, rated current: 23A, controls: CONTOUR 3, with tool magazine. An on-site inspection is possible.

CNC vertical machining center Type: DMC 1035 eco Manufacturer: DMG Year: 2010 Control: Siemens Sinumerik 810D Total hours: 25,503 Spindle hours:13,362 X: 1035 mm Y: 560 mm Z: 510 mm Max spindle speed: 8,000 rpm Tool magazine: 20 positions Rapid traverse X/Y/Z: 30 m/min Rated power: 17 kVA Torque:83 Nm Table:560 x 1200 mm Table load: 1000 kg Chip conveyor Dimensions: 3137 x 3355 x 2758 mm Machine weight: 4250 kg In good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Dear Ladies and Gentlemen, at the Bruchsal location we offer a used machine for sale without obligation: Worm Gear Milling Machine Gear Shaping Machine Manufacturer: Gleason Pfauter Type: GP200 Year of Make: 2002 Weight: approx. 9.7 t If you are interested, please leave us an offer until 15.06.2026, taking into account the following points: If you have any questions or would like to arrange a viewing appointment (from 01.06.2026), please do not hesitate to contact us.

Key data: 250 t, 4000 mm

Inv. Num. : 9155 Type: HOL-250/4000 Producer: TOMÁŠEK Created: 2015 Parameters: Compressive force: 250 t Maximum bending length: 4000 mm Distance between frame walls: 3420 mm Maximum stroke: 250 mm Machine height: 2950 mm Machine length: 4040 mm Machine width: 1850 mm Machine weight: 18650 kg Equipment: 1 upper and 2 lower tools The machine has been completely overhauled: New hydraulics New Mitsubishi control unit Controlled bending

A CNC production turning machine is offered. Working area bar capacity: 65mm, max. turning length: approx. 150mm, tool turret: 14 stations, control: C200. Equipped with automatic bar feeder magazine (type MBF), chip conveyor with integrated coolant cleaning system, compressed air connection, hydraulic chuck, signal light. Weight: approx. 5500kg, overall dimensions X/Y/Z: approx. 8500mm/2100mm/2200mm (incl. loading magazine). Inspection possible by arrangement.

CNC shearing machine manufactured in 2010. This LVD MVS-TS 13/31 features a maximum cutting length of 3100 mm and a cutting thickness of 13 mm. It is equipped with a backgauge range of 1000 mm and a powerful motor with 21.5 kW. If you are looking to get high-quality shearing capabilities, consider the LVD MVS-TS 13/31 machine we have for sale. Contact us for further details.

turning diameter: 465 mm turning length: 1050 mm control: Heidenhain x-axis: 300 mm total power requirement: kW weight of the machine ca.: 7600 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis IMA BIMA/300/125/530 CNC processing center was manufactured in 2012. It features an extensive working range with an X-direction of 5300 mm and Y-direction of 1400 mm. The machine includes a powerful main spindle with a speed range of 0-24,000 rpm and a tool holder of HSK F63. If you are looking to get high-quality CNC machining capabilities, consider the IMA BIMA/300/125/530 machine we have for sale. Contact us for further details.

greates pass round over bed: 640 mm swing diameter over face slide: 435 mm control: Siemens SINUMERIK 810D pl turning speed range: 3 - 2.500 U/min centre distance: 1.500 mm spindle bore: 70 mm spindle diameter in front bearing: 100 mm Lathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 ti The machine is in good condition and can be inspected under power at any time. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DUS630ti | DUS 630ti | DUS 630 ti The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Lathe TAKISAWA TMM 250 M1 CNC Model Fanuc Main spindle nose ASA 8 Main spindle power 22 Kw Main spindle bar passage 75 mm Swinnable diameter 350 mm Swinnable length 800 mm Main spindle rpm 4000 Number of Tool Turrets 2 Tool positions first turret 15 Motored positions first turret 15 X axis travel first turret 265 mm Y axis travel first turret + - 50 mm Z axis travel first turret 760 mm Tool positions second turret 15 Motored positions second turret 15 X axis travel second turret 228 mm Z axis travel second turret 760 mm Rapid traverses X Y Z 30 m/min High pressure coolant yes Counterspindle yes Nose spindle ASA 6 Counterspindle rpm 4000 Counter spindle power 18.5 Kw Counter spindle Z travel 800 mm The machine is visible operating in our warehouse in Gussago BS. Mimu machine tools

200MM" 3 JAW CHUCK FITTED WITH REVERSIBLE JAWS Spindle bore 59mm The Haas control is simple to use and incorporates on screen toolpath verification, The control interfaces well with CAD-CAM ,we will help with setup if required.

X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501 ...

HEYLIGENSTAEDT HEYMUNILL 3200-P in heavy-duty portal design with fixed crossrail, suitable for machining large and heavy workpieces. Large working area with travels of X 6,000 mm / Y 5,000 mm / Z 1,500 mm, as well as a table size of approx. 5,000 x 3,000 mm and a table load capacity of approx. 50,000 kg. Portal clearance approx. 3,220 mm width / 2,050 mm height. 5-axis machining / milling heads A- and B-axis (swivel axes in the milling head) C-axis (360° rotation) Simultaneous 5-axis machining possible (with fork head) Milling heads: Straight milling head FK 120/340 90° angle head WFK 100/750M Fork head FK 100/2D Milling head magazine: 5 positions Automatic milling head change Additional equipment: Internal cooling (IKZ) approx. 7 bar Tool changer 32 positions (SK50, Fibro ATC 32/50) Tool holder SK50 (DIN 69871) Tool measuring system (laser) Chip conveyor Coolant system Adaptive feed ...

Key data: 480 mm, 785 mm, 45 1/min

Control OKUMA ... OSP-P300LA Turning diameter... 480mm Turning length... 785mm Inclined bed Axis Y ... 115mm Sub-spindle Spindle bore ... 80mm Tool turret ... 12/12 Bar Feeder Axis X ... 260mm Axis Z ... 510mm Spindle speed ... 45-5000 rpm. Speed of the driven tools ... 45-6000 rpm Rapid traverse of the X axis ... 25m/min Rapid traverse of the Z axis ... 30m/min Rapid traverse of the Y axis ... 12.5m/min Axis C ... 360° Main engine power ... 22kW L x W x H ... 3330 x 1800 x 2250 mm Machine weight ... 5250kg Chip conveyor

Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible.

X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible.

For sale is a high-quality CNC turning-milling center spinner TC77-SMCY with Siemens Sinumerik control. The machine is equipped with: Y-axis C-axis Sub-spindle powered tools Chip conveyor extensive tool package Technical data: Bar passage 77 mm 12-speed VDI50 turret Main spindle ASA 8 Sub-spindle ASA 6 Speed up to 4000 rpm Turning diameter approx. 500–690 mm Turning length approx. 800–900 mm Y-axis ±60 mm Main and sub-spindle Weight approx. 6000–7000 kg Nloc Egsy Uwmws S Rrgob

This 5-axis MAKA PM 270 X CNC processing center was manufactured in 2012. It features an impressive X-axis travel of 9000 mm and Y-axis travel of 2700 mm, designed for workpiece thicknesses up to 60 mm. The machine includes a powerful milling spindle with adjustable speeds up to 24,000 rpm and a tool magazine with 32 positions for efficient tool changes. If you are looking to get high-quality milling and drilling capabilities, consider the MAKA PM 270 X machine we have for sale. Contact us for further details.

This 5-axis FORMAT4 Profit H350 1630 was manufactured in 2018. It features a robust construction with a heavy-duty welded steel frame and dual-driven moving gantry. The machine offers an impressive X-axis travel of 4000 mm, Y-axis travel of 1970 mm, and Z-axis travel of 455 mm. If you are looking to get high-quality CNC machining capabilities, consider the FORMAT4 Profit H350 1630 CNC processing center we have for sale. Contact us for further details.

This 5-axis FORMAT4 PROFIT H350 16.30 CNC processing center was manufactured in 2017. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 1970 mm, and Z-axis travel of 455 mm. The machine is equipped with a powerful 12 kW spindle and a dual-driven gantry system, ensuring high precision and efficiency. If you are looking to get high-quality machining capabilities, consider the FORMAT4 PROFIT H350 16.30 machine we have for sale. Contact us for further details.

The machine is in good technical condition, testing is possible after prior agreement. The machine is offered without a divider.

CNC milling machine Type: EMCOMAT FB-450 MC Manufacturer: EMCO Year: 2019 Control: Siemens Sinumerik 828D X: 450 mm Y: 350 mm Z: 400 mm Table size: 800 × 400 mm Maximum table load: 300 kg Spindle-table distance: 230 – 630 mm Rapid traverse X/Y/Z: 5000 mm/min Working feed: 10 – 2000 mm/min continuously Spindle speed: 10 – 5000 rpm Main motor power: 10 kW Tool clamping: SK40 Horizontal and vertical milling Vertical head tiltable by ±90° Dimensions: 1980 × 2030 × 1990 mm Machine weight: 2270 kg In good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

CNC turning and milling center Okuma Multus B300 Control: OSP-P200L Year of Make: 2007 Internal machine no. 60 Travels: X-axis 690 mm Y-axis 230 (-115 to +115) mm Z-axis 1,545 mm B-axis 0.001 ° C-axis 360° W-axis: 1,550 mm Max. turning diameter: 710 mm Mount: HSK 63 Total tool stations: 40 locations Spindle speed: 38 – 3,800 rpm Equipment / Accessories - Chip conveyors - 3-jaw chuck SMW KNCS-N-260-72 - Compact paper tape filter system 500l - One Touch IGF

CNC turning and milling center Okuma Multus B400 1SC-1500 Control: OSP-P200L Year of manufacture: 11/2010 Internal machine no. 61 X-axis: 690 mm Y-axis: +115 / -115 = 230 mm Z-axis: 1,545 mm B-axis: up to 225°, positioning in 0.001° C-axis: 360° / 0.001° Turning length: 1,500 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 40-fold Equipment: - Chip conveyors - 3-jaw chuck SMW KNCS-N-340-117 - Paper belt filter system ISF 540/6670 - One Touch IGF - Tailstock - Touchsetter

Key data: 120 t, 3110 mm

Inv. Num. : 9174 Type: TruBend 3120 Producer: Trumpf Created: 2007 Parameters: Compressive force: 120 t Maximum bending length: 3110 mm Distance between frame walls: 2690 mm Machine height: 2330 mm Machine length: 3600 mm Machine width: 1750 mm Machine weight: 8300 kg

Overhauled spindle Chiron FZ15KW HIGHSPEED CNC SIEMENS 840D X, Y, Z 550 x 400 x 425 Tools 48, HSK A63 DIN 69893 Spindle 12.000 U/min Rapids 60 m/min Pallet 2 x 660 x 400 mm Year 2001 Coolant through spindle Steel: max 36 mm / M24 Weight 8200 kgs Overhauled spindle. This machine can be inspected and tested in our warehouse. Mimu machine tools (Italy)

Gildemeister GMX 250S Linear Turning/Milling Center CNC Cover Maho DMG Hersteller [manufacturer]: Gildemeister Deckel Maho DMG Type [ type]: GMX 250S Linear Control [control unit]: Heidenhain Plus IT 3D CNC Pliot 4290 plus it Baujahr[construction year]: 12/2008 the premier class of turning and milling! Important key data of the GMX 250S Linear: • 7 Axis Turn-Mill Center • Main and counter spindle • B-axis up to 240° • Milling spindle up to 12,000 rpm • Tool magazine up to 80 places • Siemens 840D or Heidenhain control • Linear actuators for high dynamics and accuracy • Machining diameter approx. 520–640 mm • Turning length up to approx. 1,185 mm Typical equipment: • Y-axis • Powered tools • Bar feeder • High-pressure cooling • Probes • Chip conveyor • HSK-A63 milling spindle • Sub-spindle for complete machinin ...

This 3-axis BIESSE ROVER J FT 1224 was manufactured in 2017, featuring a working area of 2400 mm by 1200 mm. It includes a CNC electrospindle with a maximum speed of 24,000 rpm, and a flat vacuum table ideal for routing, drilling, and panel machining. Consider the opportunity to buy this BIESSE ROVER J FT 1224 CNC Wood Machining Centre. Contact us for more information about this machine.

Voltage: 380V, frequency: 50Hz, spindle power: 10hp continuous, 15hp for 30 minutes, amperage of largest motor: 40/60A, KA. DC gradation: 10, control: Mazak MAZATROL T-1, weight: 4.5t, with programming manual. An inspection on site is possible.

Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible.

Two Schütte six-spindle turning machines including one Iemca bar feeder are available. 1) Schütte SF 42, year of manufacture: 1977, number of spindles: 6, max. bar capacity: 42mm, max. longitudinal slide stroke: 125mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 6500mm/1400mm/2200mm, weight: approx. 10000kg. Including pick-off spindle, cams, collets, chip conveyor, oil mist extraction system and Iemca PRA40/33/P bar feeder. 2) Schütte SF 51 DNT, year of manufacture: 1987, max. bar capacity: 51mm, number of spindles: 6, max. turning length: 102mm, max. drilling depth: 102mm, spindle circle diameter: 340mm. Including pick-off spindle, CNC cross slide in position 4, cams, collets, auxiliary coolant pump and chip conveyor. Documentation available. An on-site inspection is possible.

Key data: 5000 mm, 17000 mm, 4000 mm

5-axis CNC Turning and Milling - Year of manufacture: 1970 (modernization: 1984, 2006 and 2015) - Control system: Siemens 840D - Table diameter: 5000 mm - Maximum turning diameter: 17,000 mm - Maximum working height: 4000 mm - Milling length: 8500 mm (movable table) - Table speed (max): 40 rpm (100 kW) - Maximum table load: 100 tons Accessories: - Milling head (800 rpm / 60 kW) - Universal milling head (630 rpm) - Front slider for diameters up to 1000 mm - Grinding equipment - Angle head 90 degrees (630 rpm) - Small 90-degree angle head (450 rpm) - Multiple tools.

CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used - : Price ex location: 23.500.-€ (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMONSTRATION MACHINE Three-axis milling machine in flatbed gantry design. Working paths X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame wag Bortal: Design as a solid, stress-free, completely welded slahl construction, powder-coated. Heavy table base to accommodate the VAC-CAISSON vacuum table, designed as a cassette, air passage holes in a grid of 10 mm. Feed speed: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, sliding shoes with upstream ball circulation. Transmission : Precision Ball Screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeatability: +/- 0.025 mm Mechanic ...

control: FANUC Series 31i Model 5 turning diameter: 540 mm turning length: 1040 mm c-axis: indexing: 0.001 ° turning speeds: -5000 U/min tool taper: ASA A2-6 Top turret tool hodler:: 12 y-travel: 170 (+/- 85) mm rapid traverse X-axis: 36 / 24 m/min rapid traverse Z-axis: 36 / 26 m/min Overall size: 8000 x 3000 x 3000 mm weight of the machine ca.: 12000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Heidenhain ... TNC 530 Clamping table surface... 3000x1250mm Axis X ... 3000mm Axis Y ... 1000mm Axis Z ... 1400mm Spindle speed... 10-5000 rpm Max. table load... 7000kg Spindle holder ... ISO 50. Number of positions in the tool changer ... 8 Machine weight ... 23000kg Spindle Hunter 30 000rpm Rotary table ISN 1000 CNC V