130,794 used machines on RESALE, but how to find them? Machine Search
Transnorm conveyor belt GF 950-600-500 RA2474 Technical data: Conveyor length (NL): 950 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 950 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,37/S1 scope of delivery: without supports and side guides Für eine individuel ...
Transnorm conveyor belt GF 1020-600-500 RA2473 Technical data: Conveyor length (NL): 1020 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1020 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,37/S1 scope of delivery: without supports and side guides Für eine individ ...
working area: 3000 x 1500 mm : 5000 W : 25 mm sheet thickness for stainless steel: 20 mm Sheet thickness aluminum: 12 mm machine weight ab.: 12.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 600 mm, 250 mm
Surface Grinding Machine Jung JF520 +Supromatic Built in 1979 The machine was completely overhauled in 1999 Grinding length: 600 mm Grinding width: 250 mm Operating hours: 15000 h Good condition
Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 1900 kg
Key data: 1050 mm, 510 mm, 510 mm
Inv. Num. : 9045 Type: VCN-510C Producer: MAZAK Created: 2005 Parameters: Control system: MAZATROL 640M NEXUS Work table length: 1300 mm Work table width: 550 mm Maximum table load (uniform): 1200 kg Speed: 12000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Machine weight: 7100 kg
Manufacturer: Homag Doppelspindelfräse 4 Achsmaschine, Type: BMG 512, Control: Woodwoop 6.0, Min.-max. workpiece length in mm: 4500, Min.-max. workpiece height in mm: 1600, Aluminium processing: 300, Throuh running machine: yes, Feeding speed max m/min: yes, C axis: 2, B-axis: HSK 63, Pendulum processing: ca.12, Work piece width min-max mm: 1800-24000, Min.-max. workpiece length in mm: ca.12, Horizontal: 1, Number of milling spindles vertical: 14, rpm 1): 9, Milling engine 2 hours power: 6, rpm 2): 2, Number of tool changers: 2, Kettenwechsler: yes, Pickup Wechlser: yes, Working widht max mm: 6, Horizontal drills-X: yes, Belt conveyor: yes, Number of tables: yes, Traverse table: 120, Aluminium sleeking table: Automatisch, roller table: 16, 2 station allocation: yes, Stops in the table rear: yes, Drill vertical: yes, Edgeband hight mm: yes, Magazine Qty: no, Schnittstelle DXF: ink.Werkze ...
Manufacturer: IMA , Type: Advantage 5620, Year: 2001, Program: IMA, Control: IMA, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 70-1300, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 45, Min-max feed m/min: ca. 20, Premilling: yes, IR zone: yes, Lasertechnik: yes, Kw-Leistung Laser: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: yes, Grooves, slewable-controlled: yes, Type of scraper: yes, Cleaning nozzles: yes, Edge sanding: yes, Profile sanding top bottom: Rolle, Roller/belt: 6, Year :2001
Manufacturer: Morbidelli, Type: 503, Year: 1998, Control: Tria 7000, Feeding speed max m/min: 75, Working range X: 3200, Working range Y-axis: 1050, Working range Z: 80, C axis: yes, Number of milling spindles: 1, Tool adaption system: ISO 30, Milling engine 1 hours power: 7,5, rpm 1): 18000, Number of tool changers: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: 4, Vacuum pumps m³/h: 120, Tool clamping system: ISO 30, Saw unit: Starr in X Richtung, Radial arm machine: yes, Year :1998
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 272 mm -Table surface: 1555 x 300 mm -Table thickness: 18 mm -Dimensions: 1555/500/H272 mm -Weight: 190 kg
Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Yokohama, Complete wheel Super Lug 520 2 pieces tire with tube and rim -Tire size: 7.00-12 12PR14 -Bolt circle: Ø 220 x 26 mm -Hub bore: Ø 170 mm Quantity: 1 piece available -Dimensions: Ø 680 x 185 mm -Weight: 33 kg
Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 3 pieces -Tire size: 250/50-10 SC 10 RIM 6.50F -Rim: Mefro 41042 106 6.50F-10 ET 25 -Bolt circle: Ø 150 x 19 mm -Hub bore: Ø 110 mm -Delivery/Price: complete -Dimensions: Ø 450 x 210 mm -Weight: 35 kg/pc.
Overview This traypacker with shrink wrapping system was manufactured in 2001 by Germany Meypack GmbH. The system consists of a traypacker (VP 521) and a shrink wrapping machine (SWT60) and is designed for automatic tray forming, packing, and film wrapping of cans and bottles. Products are grouped via an integrated conveyor system and packed into predefined formats. Technical data Capacity: approx. 40 trays/min Formats: 24 × 0.5 L cans 15 × 0.33 L sleek cans 4 × 6 × 0.33 L bottles 6 × 4 × 0.33 L bottles 8 × 3 × 0.33 L bottles 3 × 6 × 0.5 L bottles Application: Packaging of cans and bottles Configuration: Traypacker VP 521 + shrink wrapper SWT60 with integrated conveyor system Scope of Delivery Traypacker | Meypack GmbH | VP 521 | 2001 | Tray forming system with hot melt gluing (Series 3500V) Shrink wrapping machine | Meypack GmbH | SWT60 | 2001 | Film wrapping unit with shrink ...
Manufacturer: Bizerba Type: VARIC SA 400/500/300 Nominal Voltage: 230/115 VAC Nominal Current: 0.7/1.4 A Frequency: 50/60 Hz Certification: CE Find more here - / Contact us at -
Dough sheeter with simple manual operation for all doughs for rolling out and touring Tables can be folded up Connection 400 V, 16A-CEE plug Used machine & SAB tested Quality from a specialist company! Benefit from over 35 years of experience!
Sheeter Sinmag SM 520 F Easy manual operation for all doughs for rolling out and touring Tables can be folded up Connection 400V, 16A-CEE plug Used machine
Sheet metal plastering machine Jeros 5015/828 for 2-edge trays Stainless steel version with lubrication Connection 400V, 16A-CEE plug Used machine
Technical data Press force approx. 3200 k Bending length approx. 4420 mm TASC 6000 control system Projection 420 mm Free stand passage approx. 3680 mm Usable installation height approx. 615 mm Weight machine approx. 23400 kg Facilities - Stable machine frame press beam, stress-relieved annealed with high bending strength - Spherical bearing of the press beam (inclined position)- Electro-hydraulic upper drive with 4-cylinder technology - Optical set-up and positioning aid - Generous edge clearance - Flat Front Cover Narrow Block Hydraulic Electronic Pressure Compensator - Measuring system with glass scale and suspension compensation - Hydraulic oil in the machine (lifetime lubrication)- Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Extended equipment - 6-axis backgauge system - Hydraulic upper tool clamping - CNC crown ...
Key data: 2000 kN, 55 mm
Clamping force: 200t Year of Make: 2002 Injection Unit .../675 Screw diameter 55 mm Spec. Spray pressure 2080 bar Injection volume 427 cc Clamping unit 2000/... Clamping force 200 t Size of the clamping plates 950 x 950 mm Lights spar spacing 570 x 570 mm Tool installation height 300 mm Opening way 650 mm Max. panel spacing 950 mm Year of construction 2002 Control type Selogica
Inv. Num. : 9052 Type: OmniMat L 5000 Producer: Messer Created: 2012 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 80 mm Maximum sheet thickness when cutting (stainless steel): 45 mm Maximum sheet thickness when cutting (aluminium): 40 mm Maximum thickness of cut sheet (carbon steel): 50mm Plasma source: HPR 400 XD Machine weight: 2250 kg
The Brewiks 500 is a two-vessel microbrewery system operating on a plug-and-brew principle. It consists of a mash tun and a lauter tun, both on wheels, which together function as mash tun, filter tun, boiler, and whirlpool. Average output is up to 580 litres of high gravity wort per 6-hour brew cycle. Construction and Certification - The system is manufactured from quality stainless steel AISI 304/316 and carries a CE certificate. - Both vessels are stone wool insulated and mounted on stands with wheels for easy repositioning. Mash Tun - Included Equipment - 7-inch touchscreen controller - Electrical installation with 40 kW electrical heaters - Hygienic pump - Water heating system - Heat exchanger for heating sparging water - Pipe heat exchanger with hot water recuperation - Stone wool insulation - Valves and fittings - Stand on wheels - Condensing lid with silicon seal and drain tu ...
Glass chromatography column BPG., Inner diameter (mm): 200, Total volume (L): 16, Lower tapping: 1, Top tapping: 2, Bottom stitching: 1, Lower stitching: 1, Top stitching: 2, Top nozzle: 2
Ventilated safety cabinet with KOTTERMANN brand tray retention, Total retention volume 21.3 litres, With doors equipped with a cylinder to lock the doors open or to close them automatically., To connect to a centralized suction system via two DN70mm air inlets, 3 fixed shelves with retention:, - 1 shelf unit 385x515 H 220 mm (retention volume 5.8 Liters), - 1 shelf unit 385x515 H 220 mm (retention volume 5.8 Liters), - 1 shelf unit 285x1010 H 275mm (Retention volume 9.7 Liters), External dimensions (mm): 570x1200 H 745 mm
Chromatography column., Volume (L): 3.5 Liters , Allowed pressure: 3 bar , Authorized pressure: 3 bar , Lower tapping: 1, Top tapping: 2, Allowed temperature: 40°C , Bottom stitching: 1, Lower stitching: 1, Top stitching: 2, Top nozzle: 2
106 Mio 5 colors Autoplate Perfector CP 2000 Automatic blanket cylinder washing Automatic rollers washing Grafix Alphatronic 200 IR
Power strip fully functional Used Color: RED Equipped : 18 C13 _10A ; 6C19_16A All outputs can be switched individually and measured Total number : 25 pieces without mounting bracket Firmware version : 4.2.05-50274 Connector : CEE 32 A bought as seen without warranty Pickup Payment in advance against invoice the registered sales price is exclusive of VAT. Shipping : Costs are due in advance according to express service providers
Power strip fully functional Used Color: BLACK Equipped : 18 C13 _10A ; 6C19_16A All outputs can be switched individually and measured Total number : 17 pieces without mounting bracket Firmware version : 4.2.05-50274 Connector : CEE 32 A bought as seen without warranty Pickup Payment in advance against invoice the registered sales price is exclusive of VAT. Shipping : Costs are due in advance according to express service providers
Komorimatic with Technotrans Beta c ,PQC IV with PDC-S, S-APC,powder sprayer Grafix, KMS IV with adjustment of diagonal register (cocking),AMR , all washing devices,KHS approx 200 mil impressions
Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Filter holder: Gauze holder for extraction, mobile -Carrier frame: made of stainless steel -Extraction area: Internal dimensions 1900/440/H1060 mm -Dimensions: 2130/530/H1830 mm -Weight: 74 kg
Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires, 2 pieces -Type: 7.00-12 Rim 5.00 S-12 532/271 -Rim: for dual tires -Bolt circle: Ø 205 x 20 mm -Hub bore: Ø 160 mm -Price/Fee: complete -Dimensions each: Ø 580 x 280 mm -Weight: 56 kg/piece
Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires, 2 pieces -Type: 7.00-12 Rim 5.00 S-12 532/271 -Rim: Lemmers 6507 5.00S-12 -Bolt circle: Ø 205 x 22 mm -Hub bore: Ø 160 mm -Price/Fee: complete -Dimensions each: Ø 590 x 175 mm -Weight: 50 kg/piece
Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers, curved roller conveyor -Conveyor belt rollers: Transport rollers, carrying rollers, curved roller conveyor, diameter 50/86 mm -Transport width: 575 mm -Wave: Dimensions see photos -Material: Plastic, galvanized steel -Quantity: 41x transport rollers available -Price: per piece -Overall dimensions: Ø 86 x 620 mm -Weight: 1.8 kg/piece
Komorimatic with Baldwin Combi Cabinet, APC, PQC, PDCSX, ink temperature control, All washers, Coating unit with Harris&Bruno, HUV dryer with 1 lamp in delivery, Ink declutch unit 1 and 5, Skeleton transfer cylinders (Without powder sprayer, without IR dryer) approx. 115 mil impressions
An automatic single-head underfloor saw Emmegi including a chip extraction system is available. Cutting angle: 90°, feed travel: 0mm-1000mm, positioning accuracy: +/-0.5mm, saw blade diameter: 500mm, motor power: 6.6kW, weight: approx. 1000kg. An on-site inspection is possible.
A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible.
Top maintained MAHO MH 500 M Immediately available from location without accessories shown x-travel 500 mm y-travel 380 mm z-travel 350 mm Control Maho 134 Main spindle: Speed range - main spindle 63 - 4,000 rpm/-1 Drive power - main spindle 3 kW Gear stages 2 Tool holder SK 40 Quill stroke 50 mm You can swivel it. h/v Work table: Table clamping area 800 x 360 mm T-slots 14H7 - 5 / 63 max. table load 200 kg Feeds: Feed speed 1 - 2,000 mm/min Rapid traverse ( X / Y / Z ) 4 / 2 / 4 m/min Total power requirement 5 kW Machine weight approx. 1.6 t
Technical data of the pallet rack stand: Shelving system: META (Thyssen) Type: Multipal S The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: SR 85|20 Profile dimensions: 85 x 75 x 2.0 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 7,000 mm Depth: 500 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Used engine few hours Very good condition !
x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm control: Heidenhain total power requirement: kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 170 kg,
PDC-S (Printing Density Control-Spectrophotometer) (II) Remote register control: diagonal Komorimatic continuous dampening Ink unit temperature control KMS - Komori Monitoring System (IV) Cooling and recirculation (Technotrans) Coating unit with chambered doctor blade system (Tresu + Technotrans alpha.v) IR-Dryer (Baldwin-IVT) Impression-cylinder washing device - automatic Plate cylinder - chromed Ink-roller washing device - automatic Blanket washing device - automatic Extended delivery Powder sprayer (Weko AP 110) Blanket cylinder - chromed Model (0,6mm) KPC
x-travel: 1.020 mm y-travel: 510 mm z-travel: 510 mm control: MSC 501 Fanuc table surface area: (APC) 1.200 x 480 mm max. table load: (APC) 550 kg Main spindle:: turning speed range - milling: 10.000 U/min power capacity - milling spindle: 22 / 18,5 kW tool taper: BT 40 Tool-Presetter:: number of toolpositions: 30 pos. tool taper: BT 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8 kg rapid traverse: 32 m/min feed: 1 ~ 16.000 mm/min Tipp feed: 0 ~ 1.260 mm/min spindle bearing diameter: 85 mm total power requirement: 59,5 kVA weight of the machine ca.: 6,9 t dimensions of the machine ca.: 3,9 x 2,7 x 2,9 m Documents: Chip conveyor: 2x Coolantsystem: high pressure coolant: through spindle coolant: Signal-Light: pallet changer: 2 pos. CNC - Machining Center - Vertical MORI SEIKI - SV 500 B/40 - Clamping devices are NOT ...
THERMO HAAKE Viscotester 550 Viscometer with PK 100 D Plate-Cone Measuring System Speed Range: 0.5 to 800 min-1 Uncertainty: ± 0.1% CD Mode: < 0.5% min-1 Torque Range (Ncm) up to 400 min-1: 0.01 to 3 Torque Range (Ncm) up to 800 min-1: 0.01 to 2 Uncertainty: ± 0.5% SDF Temperature range: 50 to +250 °C Power supply: 230/115 V (50/60 Hz) With measuring tank for coaxial cylindrical geometry With measuring unit PK 100D with multiple sensors The MV 3 st mobile is slightly damaged Viscotester 550: Typ002-7026 Haake PK 100 D: Typ002-2089
Used Pablo cartoner type Pablobox 546. The device forms cartons, glues after manual loading of the product, closes the carton and glues. Year of construction 2020. CE
Number of knives: Z2 V2 width: 17 mm circle diameter: 160 mm material: Stahl : WP Bore diameter: 40 mm Jointing rebate cutter Weinig type 530 160 01 / 2 08 for use on the planing spindle of Weinig planing machines. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. format 37.50 x 52 cm Year of manufacture 2004 PCS-H color remote control Ryobimatic Film Dampening Units Technotrans cooling unit RPC Semi-Automatic Plate Changing Automatic washing equipment Dry pollinator Reading totalizer: approx. 35 million print
- Heating coil 250 kW - Voltage: 575 V / 60 Hz More information on request!
maximum number of results exceeded
please refine your search
