cnc 5 axis used for sale

This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It features a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma LB 300M X 500 horizontal turning machine we have for sale. Contact us for further details.

Filling Machine 1. Machine Speed: 0 to 40/min 2. Filling range: 20mL to 1000mL 3. Electricity: 16A three phase 380-415VAC +neutral -ground 4. Pressure: 6 to 8 bar 5. Ambient temperature: 15 to 40C 6. Phases: Single phases 7. Machine Dimension: (L)1700mm/(W)1450mm/(H)2050mm 8. Weight machine : 1,500 Kg Labelling Machine 1. Voltage: 240 volts 2. Currents: 6 Amps 3. Frequency: 50 Hz 4. Phases: Single phases 5. Machine Dimension: (L)2000mm/(W)1200mm/(H)1300mm 6. Weight machine: 300 Kg

Compressed air tank up to 11 bar, volume 500L

Copilot system with touch-screen monitor Rounding and backing station 1st gluing station with viscosity control, book mark suction device 2nd gluing station Head and tail bending station Gauzing unit Kolbus BF 527 casing-in unit Kolbus FE 604 book forming and pressing machine Casing prestacking conveyor Gluing station with circulation and premelter Backlining and headbanding station pressing station with teflon band Case prestacking conveyor Case bending machine Case forming station Case magazine right hand infeed Kolbus DS 391 stacker Kolbus SU 651 Kolbus HD 142P three-knife-trimmer including all the cutting tables and knife changing unit Kolbus FS.A FS.L XMT 680

Frequency-controlled drive motor Drive test bench Power 110 KW Voltage 400 V Speed 1500 to 5000 rpm adjustable motor with -Frequency - Incremental encoder, mains choke, mains filter - External fans Emergency Out Facility Hand control unit Frequency: Type: VCD 4 S 160A AZ/NS Serial Number: BKQ4S160AN20A-1 Output power: 207 KVA Motor power up to 160 KW Total weight approx. 1000 kg

SIM SF 500 Vibratory Spiral Conveyor SIM SF 500 Vibratory Spiral Conveyor with SIM BB-20 Belt Hopper and AKB DTB-UU-750/20 Linear Conveyor SIM SF 500 Vibratory Spiral Conveyors 230 V 50 Hz Diameter: 500 mm SIM BB-20 Belt Hopper 20 liters Filling volume: 20 litres Max. filling weight: 35 kg Chute width: 80 mm Belt speeds: 0.1 - 0.6 m/min Bunker tray, chute: stainless steel Drives: AC gear motor 230V/50Hz AKB DTB-UU-750/20 Linear Conveyors Delivery without enclosure More items - new and used - can be found in our shop! International shipping costs on request!

Lapping machine, STAHLI FLM 500, 3-ring lapping machine This machine can be inspected under power in our warehouse Test run possible Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](en.wikipedia.org/wiki/Glass) against a surface such as [iron](en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](en.wikipedia.org/wiki/Cerium(IV)_o ...

x-travel: 3500 mm y-travel: 1600 mm z-travel: 900 mm turning speeds: 20-2000 U/min spindle taper ISO: SK50 Table dimensions: 5000x1000 mm control: Heidenhain TNC 415B spindle drive motor: 22 kW rapid traverse: 5000 mm/min Table load: 12500 kg range L-W-H: 7,3x4x3,2 m milling head -swivable +/-: CNC 360 ° weight of the machine ca.: 16 t The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Torque: 10 Nm volt: 24 V weight: 20 kg power capacity: kW ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t stroke: 7000 mm clamping width: 10000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 38Hubwerk DemagAbout usmore than 500 machines in the warehouseover 8500 m² storage area, crane capacity 70 tmore than 1000 items Accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 5000 mm width: 3600 mm number: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mm y-travel: 510 mm z-travel: 510 mm Control: Mazatrol M 32 size of pallet: 500x500 mm spindle taper ISO: 40 turning speeds: 50-10000 U/min Spindle capacity: 7,35 KW tool magazin:: 60 Cooling through the spindle: bar numbers of pallets: 6 total power requirement: kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 820 mm turning length: 5000 mm turning diameter over slide: 460 mm control: B2T max. torque on the spindle: 3400 Nm turning speeds: 5,6-1120 U/min Feed: 1-5000 mm/min Rapid movement: 5000 mm/min tailstock quill taper MT: 6 3 jaw chuck Forckrath: 630 mm steady: 525 mm steady: 335 mm main drive motor: 50 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1250 mm cross rail - adjustment: 600 mm work spindle adjustment: 750 mm Tools changer for 12 tools: total power requirement: 69 kW weight of the machine ca.: 25 t dimensions of the machine ca.: m reconditioned The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 630 mm table width: 630 mm table load: . t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Westfalia Revolution / minute: 10000

Width 1.2 m Height 2 m Length 4.6 m

This 3-axis DOOSAN VM 5400 was manufactured in 2019. It features an impressive X-axis travel of 1020 mm, Y-axis travel of 540 mm, and Z-axis travel of 530 mm. The machine includes a robust table size of 1200 x 540 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VM 5400 vertical machining centre we have for sale. Contact us for further details.

A heavy-duty pre-screening unit ABR for the mining industry for separating aggregates is available. Inclination: 15°, screen area X/Y: 5000mm/2000mm, number of decks: 1, screen area: 10m², machine dimensions X/Y/Z: approx. 5500mm/2400mm/1500mm, weight: approx. 10000kg. Without a screen. An on-site inspection is possible.

We sell 2 x Huawei OceanStor 5610 storage In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all these manuf ...

Technical description : DIESEL TRACTOR TRUCK - Weight 7.200 kgs - Length 3000mm - Width 1500mm - Height 2200mm - Axle interspace 1200mm - Track width 1000mm - Ground clearance 200mm

x-travel:760 mm y-travel:760 mm z-travel:760 mm total power requirement:43 kW weight of the machine ca.:11,5 t dimensions of the machine ca.:2,7 x 4,73 x 2,87 m max. table loading capacity:500 kg

turning diameter:500 mm turning diameter over bed:500 mm turning dia. over base-slide:290 mm centre distance:1000 mm centre height:250 mm z-travel:1350 mm speeds:10 - 3000 U/min

weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm

cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm

material width:500 mm material thickness:0,2 - 3,8 mm feed length:0 - 9999,9 mm number of rolls:2 material cross-cut:128 mm² speed:60 m/min power requirement:2,0 kW dimensions (WxDxH):1,2 x 1,3 x 1,5 m roll feed:Servo control:Siemens S 7, modification 2002

This 3-axis RÖDERS RHP 500 vertical machining centre was manufactured in 2007. It features a machining range of 500 mm × 552 mm × 300 mm and a table size of 600 mm × 540 mm. The machine is equipped with a milling spindle that reaches up to 42,000 rpm and has a tool changer with 42 places. If you are looking to get high-quality machining capabilities, consider the RÖDERS RHP 500 machine we have for sale. Contact us for further details.

Machine: Generator set, Power: 495 kVA, Engine: Perkins, Alternator: Stamford, Year: 2015, Hours: 0, new, Type: Silent; Gross weight [kg]: 5250; Engine: Perkins; Accessories: Tanker, Battery, Control Panel, Silent set; Amount of previous owners: 1; Power type: 4000002; Water Tank Volume [l]: 700

; Power type: 4000002

; Engine: MAN D2876LE203

Machine: Generator set, Brand: Iveco, Model: 8065SRE - 125 kVA, Engine: Iveco 8065SRE, Alternator: Stamford, Hours: 23789, Year: 2006, Version: Silent set, , 690V - 50 Hz; Gross weight [kg]: 3300; Engine: Iveco 8065SRE; Accessories: Tanker, Battery, Control Panel, Silent set

Including Battery Charger & Engine Heater for stand-by duty.; Gross weight [kg]: 4140; Engine: Doosan DP158LC; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 700

Make: Deutz, Model: BF16M716 - 570 kVA, Engine: Deutz BF16M716, Alternator: Heemaf, Output: 570 kVA, Hours: 500 ex stand-by, Year: 1970, Version: Open set; Gross weight [kg]: 5500; Engine: Deutz BF16M716; Accessories: Control Panel, Open set

Machine: Generator Set, Brand: DAF, Model: 575 - 37.5 kVA, Engine: DAF 575, Alternator: unknown, Hours: 7074, Year: Unknown, Version: Open set; Gross weight [kg]: 1100; Engine: DAF 575; Accessories: Open set

; Power [PS]: 485; Gross weight [kg]: 5500; Engine: Caterpillar C18; Accessories: Control Panel, Caterpillar marine diesel generator set, type C18 ACERT / / generator HCM534D, with a diesel engine power of 357 bkW (= 485 hp), at 1800 rpm, with a generator power of 570 kVA at Cosphi 0.8, 60 Hz 440V, for bow thruster and pump operation v

Machine: Generator set, Brand: Caterpillar, Model: C15-550, Engine: CAT C15, Alternator: Leroy Somer LC6114F, Year: 2015, Hours: 0, NEW, Type: Silent Set; Gross weight [kg]: 6750; Engine: Caterpillar C15; Accessories: Silent set; Power type: 4000002; Water Tank Volume [l]: 750

; Gross weight [kg]: 3500; Engine: CAT 3412; Accessories: Battery, Control Panel

; Power [PS]: 378; Registration year: 1992; Axle configuration: 4x2; Cabin: Fahrerkabine

; Mileage [km]: 999999; Power [PS]: 514; Registration year: 1992; Emission class: Euro 0; Axle configuration: 4x2

; Mileage [km]: 1; Power [PS]: 571; Registration year: 2013; Wheelbase: 350 cm; Emission class: Euro 3

; Mileage [km]: 1; Power [PS]: 571; Registration year: 2013; Wheelbase: 350 cm; Vehicle outer dimensions [m]: 72,00 x 25,00 x 31,5; Emission class: Euro 3; Axle configuration: 6x4

; Mileage [km]: 1; Power [PS]: 571; Registration year: 2013; Wheelbase: 350 cm; Emission class: Euro 3; Axle configuration: 6x4

; Mileage [km]: 1; Power [PS]: 571; Registration year: 2013; Wheelbase: 350 cm; Emission class: Euro 3; Axle configuration: 6x4

; Mileage [km]: 850000; Transmission: ZF Manual, Handgeschakeld; Accessories: Bremsanlage; Colour: White; Registration year: 1999; Emission class: Euro 0; Axle configuration: 4x2; Cabin: Schlafkabine

; Registration year: 1999; Emission class: Euro 0; Axle configuration: 4x2

; Mileage [km]: 850000; Power [PS]: 380; Transmission: ZF 16, Handgeschakeld; Accessories: Klimaanlage, Elektronische Fensterschieber - links, Elektronische Fensterschieber - rechts, Elektronische Spiegel - links, Elektronische Spiegel - rechts, Bremsanlage, ABS - Antiblockiersystem, Sonnenblende, Aluminium fuel tank, Sleeper cab, Speed limit; Colour: Wit; Registration year: 1999; Emission class: Euro 2; Axle configuration: 4x2; Cabin: Schlafkabine

; Mileage [km]: 230500; Accessories: ABS - Antiblockiersystem, Sonnenblende, Aluminium brandstoftank, Slaapcabine; Registration year: 1997; Emission class: Euro 2; Axle configuration: 4x2

; Mileage [km]: 60000; Power [PS]: 420; Transmission: ZF, Handgeschakeld; Accessories: Klimaanlage; Registration year: 1996; Emission class: Euro 2; Axle configuration: 4x2

; Mileage [km]: 1185043; Power [PS]: 420; Transmission: ZF Manual ZF 16 speed box, 16 versnellingen, Handg; Accessories: Nebelscheinwerfer, ABS - Antiblockiersystem, Sonnenblende, Slaapcabine; Colour: Black; Engine displacement [cm³]: 13798; Registration year: 1997; Emission class: Euro 2; Axle configuration: 4x2