cnc 5 axis used for sale

Travel X/Y/Z: 500mm/380mm/350mm, tool holder: SK40, quill stroke: 50mm, speed: 4000rpm, feed: 2m/min, rapid traverse: 4m/min, table dimensions X/Y: 800mm/360mm, max. table load: 250kg. Machine dimensions X/Y/Z: approx. 1650mm/2250mm/1850mm, weight: approx. 1800kg, control: Maho 232. The Y-axis shows a malfunction from a feed rate of 50%. Documentation available. An on-site inspection is possible.

turning diameter: 500 mm turning length: 1000 mm control: Heidenhain total power requirement: kW weight of the machine ca.: 3200 kg t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 570 mm turning length: 2000 mm control: num + CNC Keller centre height: 280 mm turning dia. over face-slide: 365 mm spindle bore: 62 mm spindle turning speed range: 3 - 2500 U/min spindle head: DIN 55 027 Gr. 8 cutting speed: Konstant 1 - 9999 m/min feed in x - axis: 0,01 - 50 mm/U feed range Z-direction: 0,01 - 50 mm/U rapid travel - longitudinal/face: 10 / 5 m/min feed power: x-Achse 7100 N feed power: z-Achse 12.500 N travel of cross-slide: 345 mm upper slide travel: 125 mm bed width: 360 mm tailstock quill diameter: 80 mm tailstock quill stroke: 190 mm tailstock taper MT: 5 max. workpiece weight -without tailstock: 400 kg max. workpiece weight between centres: 1000 kg max.workpiece weight:each extra steadyrest: 300 kg threading metric: 0,1 - 400 mm/Stg. dimensions of machine L x W x H: 3,98 x 1,87 x 1,81 m total power requirement: kW weight of the machine ca.: t A ...

A CNC universal lathe is available. Swing diameter over bed/facing slide: 680mm/465mm, max. turning diameter: 465mm, max. turning length: 1050mm, travel X/Z: 300mm/1050mm, rapid traverse: 20m/min, speed: 3250rpm, tool positions: 12, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3300mm/1950mm/2500mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible.

CNC lathe GILDEMEISTER CTX 510 ECOLINE With control Siemens Year of Make: 2011 Travel in X: 300 mm Travel in Z: 1050 mm Spindle bore: 103 mm Speed range: 20 – 3250 rpm With the following accessories: Anti-slip protection 12-fold turret with 6 driven tool stations Tool measurement in the work area 3 jaw chuck hydraulic SMW Autoblock 0 315 mm Footswitch Jaw Chuck, Footswitch Tailstock Various Tool Holders VDI 40 Signal light 4 colour Tailstock with quill Chip conveyor with coolant tank 4 pcs machine shoes Operating Instructions

turning diameter: 390 mm turning length: 2250 mm control: Sinumerik 840D swing diameter: 610 mm cross movement. (x-axis): 605 mm longitudinal traverse (z-axis): 1.870 mm y-axis: 210 mm b-axis: 240 ° Axial travel (X2) / Longitudinal travel (Z2): 267/1.840 mm Longitudinal travel (Z3): 1.840 mm main spindle: - clamping chuck diameter: 250-315-400 mm bar material dia.: max 82 mm spindle head: Ø 220H5 spindle bore: Ø 118 mm Clamping tube inner diameter: 82 mm Diameter in front bearing: 180 mm Counter spindle: - clamping chuck diameter: 250-315-400 mm bar material dia.: 92 mm spindle head: Ø 220H5 spindle bore: Ø 118 mm Clamping tube inner diameter: 104 mm Diameter in front bearing: 180 mm Main spindle drives left and right: - power requirement: 45/47 kW speed area: 20 - 3.200 1/min Buckling speed: 650 1/min torque: 650/ 1.080 Nm C-axis speed: 3.200 1/min Torque C-axis: 660 1/min Partial  ...

CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of Make: 2008 Internal machine no. 69 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed 530 mm Speed: 4,200 rpm Tool turret 12 places (driven) C-axis 0.001 degrees Equipment: - One touch IGF - Chip conveyors - Touchsetter - 3-jaw chuck Kitagawa B-210 - NC tailstock

A DMG MORI CNC 4-axis machining center is available. X/Y/Z-axis travel: 730mm/730mm/880mm, spindle speed: 15000rpm, torque: 250Nm/104Nm, tool interface: HSK-A63, spindle-to-table distance: 80mm-810mm, spindle nose-to-table distance: 70mm-950mm, pallets: 2, pallet dimensions X/Y: 500mm/500mm, max. workpiece weight: 700kg, max. workpiece diameter: 800mm, max. workpiece height: 1000mm, tool positions: 60, rapid traverse: 60m/min, feed rate: 60m/min. Machine dimensions X/Y/Z: approx. 6000mm/4000mm/2700mm, weight: approx. 12000kg, control: Siemens Sinumerik 840D sl, power-on hours: 33184h, operating hours: 10601h. Including 70bar internal coolant supply and Knoll KF 110/700. Documentation available. An on-site inspection is possible.

A DMG Mori CNC 4-axis machining center is available. X/Y/Z-axis travel: 730mm/730mm/880mm, spindle speed: 20000rpm, rapid traverse: 60m/min, feed rate: 60m/min, feed force: 10kN, tool interface: HSK-A63, number of pallets: 2, max. workpiece weight: 500kg, tool positions: 40, control: Siemens Sinumerik 840D sl Operate, power-on hours: 14948h, operating hours: 5251h. Including chip conveyor, pallet changer and coolant tank. Documentation available. An on-site inspection is possible.

We offer the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in demand, it will not be used. The machine is in its original packaging and unused. 5 - Axis CNC Portal Milling Machine, New Make : HURCO Type : DCX 32-5 Si Year of manufacture : 2025, Delivery 3 / 2026 Control: MAX 5, 2 screens TRAVELS X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal stand: 2,130 mm Distance spindle nose to table: 66 – 966 mm SPINDLE / HEAD Clevis CYTEC Tool holder: HSK63-A Max. speed: 18,000 rpm Power : 63 kW Max. torque: 106 Nm Rapid traverse: 15/15/10 m/min Tool Changer / ATC : 60 - speed EQUIPMENT : - IKZ internal cooling by spindle 40 bar - KNOLL belt filter system - KNOLL chip conveyor - Di ...

A Hurco CNC vertical machining center is available. Tool holder: SK50, travel X/Y/Z: 1270mm/660mm/610mm, max. table load: 1500kg, spindle speed: 8000rpm, tool stations: 30, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 4600mm/4600mm/3000mm, weight: approx. 9250kg. Documentation available. An on-site inspection is possible.

CORMAK CKT 500x850 CNC turning center was built in 2016 in Poland by CORMAK. The machine is designed for the precision machining of metal workpieces with a maximum diameter of 500 mm and a length of 850 mm. It enables a wide range of advanced operations, such as drilling holes, threading, and turning of cylindrical, conical and spherical surfaces. Thanks to its wide range of machining capabilities, the machine is ideal for the production of precise and repeatable parts used in various industries. The CORMAK CKT 500x850 features a rigid design that ensures stable operation even during intensive use. Workpieces clamped in a 10-inch manual chuck are machined by means of a spindle reaching a maximum speed of 2000 rpm and cutting tools placed in a 6-position turret. Precise positioning and support of the workpiece during the process is ensured by the tailstock. All machining parameters are ...

: 570 : 365 turning length: 1000 mm control: Sinumerik 850 turning speeds: 2500 U/min spindle bore: 62 mm weight of the machine ca.: 5,6 t dimensions of the machine ca.: 6x2,5x2 m The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 820 mm turning length: 5000 mm turning diameter over slide: 460 mm control: B2T max. torque on the spindle: 3400 Nm turning speeds: 5,6-1120 U/min Feed: 1-5000 mm/min Rapid movement: 5000 mm/min tailstock quill taper MT: 6 3 jaw chuck Forckrath: 630 mm steady: 525 mm steady: 335 mm main drive motor: 50 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours a ...

Manufacturer: MAHO Model: MH 500 W4 Year: 1989 Condition: Used Stock No: 9360 Hours: 79368 h Work table length: 800 mm Work table width: 360 mm Maximum table load (even): 250 kg Spindle drive power: 11 kW Maximum vertical spindle speed: 4000 1/min X-axis travel: 500 mm Y-axis travel: 380 mm Travel travel Z-axis: 350 mm Cone: ISO 40 Machine height: 1800 mm Machine length: 1700 mm Machine width: 2000 mm Machine weight: 2100 kg

Guild Master CTX 510 Control: Siemens 840 D with Shop - Turn Year of Make: 2004 Travel X / Z: 300 / 1050 mm Revolver: 12-speed Tool holder: VDI 40 Bsbmezmxz Roknrzodf Spindle speed up to: 3,500 rpm Bar passage: 90 mm Quill travel: 150 mm Tailstock Cooling 20 bar Chuck size 315 mm Spindle hours approx: 14,000 Batch sizes from 0 - 5 were produced on the machine Programming was done on the machine

Turning diameter: 500 mm, swing diameter over the cross slide: 290 mm, turning length: 1500 mm, spindle speed: 8 to 2800 rpm with three gear ranges, spindle bore diameter: 70 mm, three-jaw chuck diameter: 250 mm, tailstock quill taper: MT4, quill travel: 180 mm, connected load: 24 kVA, control system: Heidenhain Manual Plus, length: 3200 mm, width: 1700 mm, height: 1800 mm, weight: 3.2 t, operating hours: 42,733 h. The machine is equipped with a manual tailstock, chuck guard, coolant system, Multifix tool holder, various tool holders, various drill chucks, various turning and drilling tools, interchangeable jaws for the three-jaw chuck, a depth stop for the main spindle, a tool cabinet and documentation. The machine was completely overhauled by the manufacturer in 2010. An on-site inspection is possible.

A Röders RXU 1200 DSH and a Röders RXP 500 DSC are available, 1) RXU 1200 DSH, x-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24,000/min, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle interface: HSK 40, connected load: 85kVA, weight: 33t, with paper filter. 2) RXP 500 DSC, x-axis: 425mm, y-axis: 400mm, z-axis: 240mm, spindle speed: 42,000/min, probe: Renishaw, number of tools: 40, spindle interface: HSK 40, with paper filter. An on-site inspection is possible.

MIKRON UME 560 ist eine CNC-Fräsmaschine mit hoher Präzision, hoher Genauigkeit und Zuverlässigkeit. Kapazitäten: Tisch 900×530 mm; Wege X 560 mm, Y 500 mm, Z 400 mm. Technische Daten: Spindelaufnahme ISO SK40 DIN 69871, Drehzahlen horiz./vert. 5–5000 t/min stufenlos; Vorschübe 1–8000 mm/min (X/Y/Z); Eilgang 10 m/min; Anschluss 50 Hz 3x 380 V; Gewicht ca. 3350 kg; Abmessungen L 3930 (2625) × B 2650 × H 2140 mm. Zubehör: elektronisches Handbedienpult, Kühlmitteleinrichtung. Ermöglicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizintechnik, Uhrmacherei und Werkzeugbau Technische Daten ohne Gewähr

BOEHRINGER / VDF DUS 560 ist eine CNC-Drehmaschine, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazität: Spitzenhöhe 280 mm, Spitzenweite 1500 mm, Ø Bett 570 mm, Dreh Länge 1500 mm, Spindelbohrung 62 mm. Technische Daten: 2 Stufen 3–2500 t/min, 19/15 kW, 1800/1400 Nm, Pinolenhub 190 mm, Vorschübe 0,01–50 mm/t, Eilgang X/Z 5/10 m/min, 3x400V, 35 kVA, Gewicht 5200 kg. Zubehör: Backenfutter Ø300/500/560 mm, MULTIFIX, Späneförderer, Reitstock, Backensätze, Werkzeughalter. Ermöglicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizintechnik, Maschinenbau und Uhrenindustrie. Technische Daten ohne Gewähr

TSUGAMI HS 207-5AX ist ein CNC-Langdrehautomat (Swiss-Type) mit hoher Präzision, großer Genauigkeit und Zuverlässigkeit. 5 Achsen, 2 Spindeln; Drehdurchmesser 3–20 mm; Drehlänge max. 250 mm; Spindeldurchlass 20 mm. Drehzahlen 200–10.000 t/min; Spindelleistung 3,7 kW; Leistung Gegenspindel 2,2 kW; 35 Werkzeuge; Eilgang 32 m/min; Anschluss 50 Hz 3x400 V; Gesamtleistung 14,6 kVA; Gewicht ~3300 kg; Abmessungen 2110×1200×1885 mm. Lader LNS EXPRESS 320. Entwickelt für enge Toleranzen bei Präzisionsbauteilen. Technische Daten ohne Gewähr

Amada HFE M2 5012 Abkantpresse (2021) Hersteller: Amada Typ: HFE M2 5012 Abkantpresse Zustand: gebraucht, unter Strom in Produktion Baujahr: 10/2020 Einschaltstunden 6830h Arbeitsstunden: 417h (wird noch eingesetzt) Presskraft (kN) 500 Pressbalkenlänge (mm) 1270 Durchgang zwischen den Maschinenständern (mm) 1035 1 Hub (mm) 150 Öffnungsweite ohne Stempelhalter (mm) 480 Ausladung (mm) 100 Arbeitshöhe (mm) 920 Arbeitsgeschwindigkeit (mm/sec) 15 Zustellgeschwindigkeit (mm/sec) 185 Öffnungsgeschwindigkeit (mm/sec) 185 Abmessungen: Länge (mm) 2585 Breite (mm) 2190 Höhe (mm) 2420 Gewicht (kg) 3600

Leadwell LTC-50CL CNC Drehmaschine (10/2006) Hersteller: Leadwell Typ: LTC-50CL CNC Drehmaschine Baujahr: 10/2006 Zustand: gebraucht, gut, in Produktion Optional mit Zubehör Weitere Informationen folgen

turning diameter: 570 mm turning length: 2000 mm control: Heidenhain TURN PLUS centre height: 265 mm rapid travel - longitudinal/face: 10/7 m/min spindle turning speed range: 1-2500 U/min total power requirement: kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 5,5 x 2 x 2 m Equipment: Heidenhain TURN PLUS CNC control 3-jaw manual chuck Multifix tool holder 3 steady rests The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-axis travel: 1,050 mm Y-axis travel: 550 mm Travel Z-axis: 520 mm Spindle speed (max.): 12,000 rpm Overall height: 2,778 mm Overall width: 2,977 mm Overall length: 3,635 mm Total weight: 6,700 kg Workpiece weight (max.): 800 kg - Control: SIEMENS 828 D incl. OPERATE and ShopMill - Number of magazine slots: 30 - Tool holder: BBT 40 - Internal cooling: 20 bar - Tool weight: max. 8 kg - Tool change time: 3 s - Chip-to-chip time: 5.5 s - Blum probe ZX-Speed IR - Blum 3-D touch probe TC-52 LF

The machine is in good technical condition; it can be tested by prior arrangement.

Used machine NLX2000SY with loading magazine Machine Type: Turning Center Model No.:NLX2000SY Manufacturer: DMGMORI Control: CELOS Year of construction/IB: 2021/2022 Location:: Germany - Main spindle 15/11 KW - Chuck for main spindle - Automatic path control of the clamping cylinder for the main spindle. - Sub-spindle 11/7.5kw - Chuck for sub-spindle - Automatic path control of the clamping cylinder for the sub-spindle - Double footswitch for HSp and GSp - Coolant shower on lining - Spindle 2 tailstock specification - 20 Station turret - Milling drive for all stations 10,000 min-1 - Direct position measuring system X-Y-Z axis - Y-axis - Chip conveyors - Coolant pump 8bar - Bar feeder IF - Parts catcher conveyor belt for parts - Irco Bar Loading Magazine MUK 7012 III - Workpiece ejector (headstock 2) - Oil separator - Alternating speed - Spindle orientation ...

turning diameter: 590 mm turning length: 1100 mm control: Fanuc turning diameter over bed: 800 mm total power requirement: --- kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is equipped with a sub-spindle (equipped with a 3-jaw chuck SMW AUTOBLOK, diameter: 210 mm) as well as a 12-station tool turret, incl. driven tool stations, as well as an SMW AUTOBLOK 3-jaw chuck, diameter: 250 mm, plus chip conveyor, filter extraction, documentation and CDs. Additional technical specifications: • Bed inclination: 45° • Bed diameter: 700 mm • max. slide diameter V1 to V3: 500 mm • in the front workpiece diameter: 320 mm • centre length: 1450 mm • Travel Z3-axis: 1200 mm • Spindle height axis to floor: 1043 mm • Drawbar diameter: 81 mm • Front bearing diameter: 130 mm • Resolution axis C1: 0.001° • max. weight between centers: 500 kg • Distance between two spindle noses: 1495 mm • Z1 axis travel: 1200 mm • max. workpiece length: 1140 mm • max. workpiece diameter: 450 mm • Bar capacity of sub-spindle: 50 mm • Bore diameter o ...

The machine is equipped with a tailstock and a 12-station tool turret, incl. the tool holders located in the changer, plus a 3-jaw chuck SMW AUTOBLOK, diameter: 300 mm, incl. chip conveyor and filter extraction system as well as documentation. Additional technical specifications: • frequency: 50/60 Hz • Diameter in the front bearing: 140 mm • Feed drive in X and Z-axis: 40 x 10 mm • Feed forces X/Z: 7.5 kN • Y-axis feed force: 7000 N • rapid traverse of C1-axis: 100 m/min • Position measuring system X/Y/Z: absolute rotating • Positioning uncertainty X: 0.008 mm • Positioning uncertainty Z: 0.010 mm • Working area axis distance: 1150 mm • Swivel range over X slide: 465 mm • Swivel range over bed: max. 680 mm

turning diameter: 700 mm turning length: 3074 mm control: Mazatrol Matrix Smooth X : 91 mm : JIS A2-11 : 4000 1/min spindle motor: 30 / 22 kW Positioning speed: 12000 1/min milling spindle drive: 24 / 22 kW : 845 mm : 430 mm : 3126 mm : -30 / +210 ° Feeds (X,z,u,w-axis): 360 ° : HSK 100 : 36 Rapid Travel X / Y / Z-Achse: 50 / 50 / 40 m/min tailstock quill taper MT: 5 total power requirement: 77,73 kVA weight of the machine ca.: 25,5 t dimensions of the machine ca.: 7,3 x 3,4 x 2,95 m - Mazatrol Smooth X CNC control - 5-axis lathe - 36-position tool changer - IKZ / spindle cooling - Standard tool set (HSK T100) included - C-axis 0.001° - Tailstock - Milling head with milling spindle speed of 12,000 rpm -- B-axis 240° (-30° / +210°) - Smw 5.1 fixed tailstock (range 85–350 mm) - Kitagawa 21 3-jaw chuck - Renishaw RMP60 wireless probe - Engraving function, thread cutting, thread star ...

turning diameter:500 mm turning length:1000 mm control:Siemens 840 D spindle:42 / 28 kW spindle turning speed - stepless:31 - 4000 1/min max. torque on the spindle:345 Nm c-axis:360000 x 0,001° feeds -stepless-:0 - 10000 mm/min rapid traverse:10000 mm/min turret stations / rotary tool stations:12/12 VDI 40 RPM of rotary tools:2000 1/min diameter of quill:90 mm quill stroke:80 mm tailstock quill taper ISO:SK 30 Tailstock Travel:600 mm Power rotary tools:3,5 kW :22,5 Nm Rotary tool holders:4 ax./ 4 rad. spindle passage:66 mm total power requirement:30 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:8x 3 x 4 m

turning diameter:1600 mm turning length:12000 mm control:FAGOR 8050 Used CNC Lathe with FAGOR 8050 and extensive accessories. For further technical data and accessories, pls browse the Appendix. Parallellathe WMW mod. 4 GUIDE-WAYS ¦ CNC: FAGOR 8050 ¦ bed: monolithic ¦ centres height: 800 mm ¦ centres distance: 12000 mm ¦ swing over cross-slide: 1250 mm ¦ turret: automatic 4 positions ¦ tailstock: motorized ¦ tailstock connection: hydraulic ¦ platform: diam. 1000 mm ¦ steady rests: nr.02 ¦ chip conveyor Warranty: none Take advantage of the favorable leasing and hire-purchase terms from IKB Leasing. Ask us about it.

The machine is in good technical condition; it can be tested by prior arrangement.

input cartridge for SelectSet 5000 - all details can be seen on the picture. The cassette is tested and comes from a workingSelectSet. Available on stock

AGFA Laser for SelectSet 5000. The laser is tested and works - can be seen on the picture. We are happy to send you the high-resolution original image, here the laser beam can be seen more clearly. Available now

AGFA knife for SelectSet 5000. Including knife holder and dental equipment. Available now

AGFA drive motor of the knife for SelectSet 5000. Including dental equipment. Available now

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

4 + 4 bags Sniffer Output Available: Immediately

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: Railway railcars Information and pictures on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange ...

Format: 59 x 74 cm<br>Perfection 8/0 - 4/4 Color Pilot Plus Ink Control AIR Center (Rietschle) Technotrans temperation Technotrans Combi cooling device with external capacitor Washing machine device for pressure cylinders Quickstart Low Cover Stabilization Powder (Hitronic) Inline Observer Optiprint Jacket Preparation Color temperation Non-Stop Semiautomat Delivery<><br>Still in operation: Yes<br>Verf Gbar: Immediately

Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.

Offer of a high-bay warehouse with approx. 2,500 parking spaces. Shelf stand approx. 6.00 m high All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Price ...

AT-Motor Scania Typ=DC12 Pumpe-Düse komplett ohne Anlasser+Lichtmaschine. 1 Jahr Garantie,337KW bei 1.800 U/min.Für Notstrom+BHKW Anwendungen. info@miw-zeven.de

Austausch-Motor Actros DB OM 501LA-430 PS generalüberholt auch ohne Altteilrückgabe,geben Aufpreis,zu verkaufen.1Jahr Garantie info@miw-zeven.de

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

Incubator from Heraeus Type: B 5090 E Rated temperature: 70C 2-door glazed Dimensions: length x width x height: approx. 119 x 71 x 75 cm Weight: approx. 70 kg

All original spare parts+engines Lombardini from stock ready to ship the following motors available from stock immediately: LDW602/ 1003 / 1204/1204T/ 1404 MIW Ltd. Engine Repair Plant North-West Ring 8 D-2704 zeven-Germany Phone: 0049 (0) 4281-950583 Fax: 0049 (0) 4281-950585 Mail=info@miw-zeven.de