cnc 432 used for sale

CNC Vertical Machining Center DECKEL-MAHO Model: DMC 70V Manufacturer: DECKEL-MAHO Model: DMC 70V New in: 1999 Condition: very good, complete Technical details Table size: 900x550 mm Max. table load: 600 kg X travel: 700 mm Y travel: 550 mm Z travel: 500 mm Spindle speed: 30 000 rpm Spindle taper: HSK 50 Total power requirement: 10/15 kW Dimensions: 3900x3700x3000 mm Machine weight: approx 8000 kg

CNC Vertical Machining Center MORI SEIKI mod. SV-503 Manufacturer: Mori Seiki Model: SV-503 YOM: 2001 Technical details: Table size: 1300x600 X-axis travel: 800 mm Y-axis travel: 510 mm Z-axis travel: 660 mm Spindle drive motor: 30 HP Spindle speed: 10000 rpm Tool changer: 30 ATC Spindle taper: 40

CNC plasma cutting system knife Metalmaster working range: 8000mm x 2500mm Plasma: Hypertherm 260 Cutting up to 32mm very good condition immediately available with Donaldson filter system Including Cad/Cam software commissioning on request

under current Details on request

CNC plasma cutting system Work area: 1500 x 3000 mm OTC Super plasma 12000 Cut quality cutting up to 20 mm New control ProDNC from Micompan Data transfer via USB

CNC plasma cutting system blades Metalmaster Work area: 8000 x 2500 mm Plasma: Hypertherm 260 Cutting up to 32mm very good condition with Donaldson filter system now available Including CAD/CAM software commissioning on request

Knife Cortina plasma and burning cutting unit 1 x PlasmaSupport Hypertherm HD 3070 1 x gas support Working range: 2500 mm x 4000 mm electrified operation on request

Microstep - EuroCut-P 3001.15 Working range: 1500mm x 3000mm plasma source Kjellberg HiFocus 160i with automatic gascosole cutting up to 25mm quality cutting suction Donaldson MD2-PLC + DFPRO 4 SPRK with an additional EX protection. Refurbished in 2016 All maintenance or repairs were carried out exclusively by the manufacturers (MicroStep and Donaldson). The prescribed maintenance intervals have always been adhered to. All maintenance and repairs are extensively documented. commissioning on request

Microstep - EuroCut-P 3001.15 Work area: 1500 x 3000 mm Plasma source of Kjellberg HiFocus 160i with automatic Gaskosole Cut quality cutting up to 25 mm Extraction Donaldson MD2-PLC + DFPRO 4 which with additional EX-protection. Refurbished in 2016 All servicing or repairs were solely by the manufacturer (Company MicroStep and Donaldson). The prescribed maintenance intervals were always met. All maintenance and repairs are extensively documented. Commissioning on request

Laser cutting machine Bystar 3015 Bylaser 4000, 4 kW Laser source incl. shuttle table system, cooling system, compl. Cabinet combination with CNC and laser- Control, protection in the cutting area, 2 Cutting heads, reflection absorber, cross-Jet, extraction system Documentation Laser a 19, 000 h Maintained by Bystronic.

CO2 laser Bystar 3015 4.4 Kw, Table size 1500 x 3000 mm, incl. changetable, without loader, without suction, Y.O.M. 2006 glass revision in November 2015 under power laser: 28,000 h power on demand

CO co² Bystar 3015 4.4 kW, 1500 x 3000 mm, table size incl. removable table, without loader, without extraction, BJ. 2006,. Glass revision in November 2015 Laser: 28.000 h Power: 50,000 hours

Knife Cortina 2600. Year built:1994 Control KS 20A Plasma: Hypertherm Max 100 (cutting up to 30mm) The suction table: 1500mm x 3000mm. With only one burner car instead of 2 or 3, you have a working width of up to 2000mm. The box program on the PC is the OmniWin CAD. Extraction system: Donaldson 5.5 KW to be visited under electricity commissioning on request

Esab Combirex DX 3000 Working range: 2500mm x 4000mm 1x Plasma Support CNC Portal Plasma Cutting Machine Manufacturer: ESAB Type: Combirex DX 3000 Built: 2015 Control: Vision T5 Track width: 3,000 mm frame: 6000mm Working range: 2500mm x 4000 m suction table 1 plasma torch with power source m3 202 torch PT 36 Cutting rods: Punching: 38 mm Cutting: 45 mm laser pointer filter system ex protected cutting software: Columbus Very low operating hours commissioning on request

CNC controlled 3 axle system a 3 axis system for various Aufgaben(wie Fraesen, Bohren, gravieren, Handhabung, Lasern, Laborarbeiten, etc.) X-Y axes are created by IEF. Traverse paths x 200 mm, Y: 320 mm Z axis (FESTO) operated pneumatically. Stroke Z: 95 mm 4 x supports height 330 mm Control IEF, PA control Alu-Profilrahmen(4x4cm) with 4 doors with automatic locking system. Dimensions: L x D x H (CA. 1390 x 990 x 2000 mm) Aluminum table top Cabinet

Bystar 4025 NT 65 Sheet size: 6500 x 2500 mm Interchangeable table system Axis of rotation: 15-315mm 4.4 of kw CO ² laser steel 25 mm Power-on hours 18000 Vacuum pump 16000 With filter system Machine is already dismantled

Gemini type 4000 BJ. 11/2007 8000mm longitudinal career 2 x oxy-fuel burner 1 x plasma support preparation Workspace 3500mmx6000mm without filter system without firing tables. Commissioning on request

CNC Portal plasma cutting machine Manufacturer: ESAB Eagle 2500 Year of construction: 2004 Governance: Vision DNC connection Track width: 2,500 mm Career length: 5 m Work area: 2 x 3 m Vacuum table 1 plasma torch Kjellberg HiFocus 160i power source automatic gas Console (see PDF) Cutting thickness: up to 25 mm quality section Filter system Cutting software: Columbus Now available

Byspeed 3015 4400 W Bystronic 2006 Duty hours: 58800 h cutting hours: 27510 h laser power: 4400 W workspace: 3000 x 1500 mm maximum thickness: structural steel: 20 mm stainless steel: 12 mm aluminium: 8 mm machine weight: 21000 kg Accessories: Byloader 3015: sheet dimensions: 3000 × 1500 mm Blechtaf Download eldicke: 0.8-25 mm-maximum sheet metal Panel weight: 890 kg documentation

Control cabinet The offer includes complete control cabinet containing a flat grinding machine with 2 x room cooler Control: Siemens Type: Sinumerik 3 G 1 x Sinumerik 3 G, 6FC 3742-OHA-Z, 24V DC, 100W 1 x SIMOVERT P 6SC6025-1AA01, type D165 D165/25 M5REQ, no. 3203572, output 1 x 25/50A DS 1 x SIMOREG transistor plate, type 6RB 2025-2EA00, ed.: 2 x 25/50A 200V Various circuit breakers, transformers, etc. Sold only to commercial enterprises. All information without guarantee

Knife CNC plasma and cutting system Multitherm 4000 gauge width 4000mm 1 x Autogen Support 2 x Plasma Hypertherm 260 XD only the machine bridge without runway and suction table is sold

MAZAK INTEGREX 200 SY + FLEX GL-100C. 2001. MAZATROL 640 MT control maximum turning diameter 540 mm Z-axis travel 1,065 mm Main spindle maximum RPM 5,000 rpm Main spindle full C-axis Counter-spindle maximum speed 6,000 rpm Y-axis +/-80 mm Milling spindle for turning and milling Spindle maximum speed 6,000 rpm Full B-axis, 225° Tool changer with 40 tool positions KM-63 tool mount Tooleye 1 x 3 - jaw Chuck, diameter 210 mm 1 x 3 - jaw Chuck, diameter 170 mm Gantry loader Flex GL-100 C. High pressure cooling through spindle, 20 bar Chip conveyor CE mark

MAZAK INTEGREX turning/milling center 200Y Bu. 1999 Mazatrol fusion control Max Drehdurchm. 520 mm Max Schwingdurchm. 540 mm Maximum turning length 1,018 mm Bar passage 51 mm C-axis + angetr. Tools Y-axis +/-70 mm Distance between the top 500 mm Drive 30 kW Maximum main spindle spindle speed 5,000 rpm Maximum speed milling spindle 6,000 rpm Tool changer with 40 stations 3-jaw Chuck 200 mm Tool measuring arm Tailstock Chip conveyor Total connected load 31 kVA Machine dimensions 3.50 m x 2.10 m x 2.50 m Machine weight 6,800 kG 25 tool holder KM 36 duty hours approx. 36,000

Manufacturer: Imes-iCORE Type designation: iCUTwater ECO Year of constr.: 2017 Work area: 620 x 1000 mm Die heads: 1 2 1/2 D, 2D or 3D: 2D Hours of operation: 20 Dimensions: Dimensions of 2150 x 1615 x 1964 Power: 7,5 kW Power supply: Bar: 1500 bar Hedging in Amper: 32A Hours of operation: 20 Integrated pump directly driven built-in pump "Tilo Klett" with 1500 bar / 2 l / min and cutting head Allfi X-type, sand Raddosierer type Jetcut,. integrated reservoir sand 25 kg. Designed for Fokusierrohr 0,90 mm and nozzle 0.30 mm. Incl. control software and post processor on the machines notebook.

Blade CNC plasma and cutting installation MultiTherm 4000 Track width 4000 mm 1 x autogen support 2 x plasma Hypertherm 260 XD only the machine bridge without carrier and vacuum table is sold

Air Liquide Plasma tome 25 HPC 2007 construction working area 2m x 4m water table with nivau regulation 1 x Plasma Nertajet HP 125 , cutting up to 25mm

Knife Cortina 2600. Year of construction: 1994 Control KS 20A plasma: Hypertherm MAX 100 (cut up to 30mm) The vacuum table: 1500 x 3000 mm. With only a torch cart instead of 2 or 3, you have a working width up to 2000 mm. The box program on the PC is the OmniWin CAD. Exhaust system: Donaldson 5.5 KW To visit, now available under current Commissioning on request

Air Liquide Plasmatome 25 HPC Built in 2007 Work area 2 m x 4 m Water table with Nivauregulierung 1 x plasma Nertajet HP 125, cutting up to 25mm

4000 x 2000mm Laser 4400w ByVision CNC

ESAB CXD 3000 P Work area: 14000 x 2500 mm 2006 completely overhauled, new controls, new plasma system installed. 1 x plasma Plasmaarc 200 Cutting up to 40mm 2 x 6 m including burning table Without firing tables, without filter system Installation and commissioning on request

With CNC control, HEIDENHAIN, Type: TNC 155, measuring taster Separate control cabinet: 1260 x 500 x 1700 mm Travel distances 700 x 550 x 550mm Table area 1000 x 490 mm Accessories: Treatment / Cooling system / tool shots The machine stored since 2013. At the time of storage, the machine was fully functional.; ready for use

CB-Behrens CB-25-II/1650-L Hours of operation:-Behrens 41190 hour laser ca 25000 hours Year of construction: 1995 Documentation: All available Software: IBH-CNC Last revision: mid 2016 laser Wegmann Basel Triagon 2Kw 2014/5 the glass tubes have been renewed Y-spindle was renewed. Only 17 are well usable from the revolver places the others should be also usable after a review.

CNC laser cutting machine Bystronic Bystar 3015 -. Overall performance 125 KVA Co ² laser source of Bylaser power 5200 Watt,. CNC rotary axis for Chuck Ø 315 mm with thrust bearing for tube processing Cutting performance ST37 - approx. 25 mm Stainless steel 1.4301 approx. 20 mm, aluminium approx. 12 mm Cutting speed maximum 50 m/min, simultaneous positioning up to 113 m / min car. Bela de Setup Byloader with sheet metal separation Dedusting equipment Only dividers operation! CA. 27.500 power-on hours -. approx. 6000 hrs laser hours

Plasma and cutting installation Promotec Ector 30 / 170 Working range: 3000 mm x 17000 1 x plasma HT 2000 Hypertherm cutting up to 25mm 1 x autogen support up to 100mm To visit machine under power. Without table and filter Installation and commissioning on request

CNC machining tool Morari Swivel unit with recording ISO-30 maximum speed 15000 rpm with test certificate Built in 2000 Excellent condition, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

No. 4304: 1 gebr. Universal tool milling machine Fabr. COVER, type FP 3 CC Bu. 1990 with Sinumerik 880 ARB.-ber.: 400 x 400 x 500 mm, power: 6 kW Accessories: rigid table full cab Electronic Handwheel Documentation other: spindle retainer for SK 40 / DIN 2080 Speed range up to 6300 min-1 Rapid traverse 10 m / min Space ca Weight approx. 3 to

MAZAK laser cutting system NTX510 1, 5kW Year of construction: 2000 very well preserved, fully reconditioned MAZAK laser machines with 1500W Panel sizes: 3000 mm x 1500 mm minimal footprint by 2, 9 m x 7 m Small part conveyor completely encapsulated engine cover FE: up to 12 mm VA: up to 6mm Plastic can incl. software including warranty incl. extraction system incl. commissioning + training = optional with automatic loading and unloading.

CNC machining center cover MAHO DMC 60 U hi-dyn, 2 pallets, head universal Year: 2002 country of origin: Germany workspace: X: 600 mm Y: 700 mm w: 600 mm pallet 630 x 500 mm spindle speed: 18 000 RPM tool Magazine: 120 St Tool holder: SK 40 control CNC HEIDENHAIN 422 weight: 9 000 kg total connection requirements: 44 kVA

MAZAK laser cutting system STX510 MKII 2, 5kW very well preserved, fully reconditioned MAZAK laser machines with 2500W Panel sizes: 3000 mm x 1500 mm minimal footprint by 2, 9 m x 7, 3 m Small part conveyor Ball roller table completely encapsulated engine cover casting bed, no foundation necessary FE: up to 20mm VA: up to 10mm ALMG: up to 8mm Plastic can including CAD / CAM software 2018 version including warranty incl. commissioning + training To test power ready to delivery ready to use = optional with automatic loading and unloading MAZAK CELL =.

Fiber laser machine HLF Power: 4kW Sheet size: 3000 x 1500 mm Changing table Siemens touch screen controller with LAN/USB Siemens drives Precitec auto focus Pro cutter cutting head IPG resonator with 4kW is included: Warranty CAD CAM software Commissioning DTL delivery Training offered

CNC multi-tasking lathe NAKAMURA SUPER NTX-S Reference No.: 18038 Mfg. year 2007 S/No. V300901 FANUC 16i-TB Luckbei-dialog system supercap Maximum turning diameter -Upper turret 390 mm -Lower turret 300 mm Maximum turning length 1,100 mm Max cash working capacity 65 mm Milling spindle AC 18.5/11 kW Milling spindle maximum speed 12,000 rpm Capto C6 Servo controlled B-axis, 230° Y-axis 160 mm ATC with 40 tools Main and sub spindle AC 22/18.5 kW Main and sub spindle maximum speed 4.500 rpm 12/24-station turret, all stations for driven tools Maximum speed of driven tools 3,600 rpm 2 off. 3-jawchuck 210 mm, SCHUNK Coolant tank 250 liters High pressure pumps Swarf conveyor 1 set of toolholders for lower turret -static 9, 3-driven weight 19,000 kg CE-mark

X: 500 mm Y: 360 mm Z: 400 mm Speed range: 40-2000 RPM Spindle retainer: SK 40 DIN2079 Control: HEIDENHAIN TNC 155 Total power: 6 kW Machine weight: 2000 kg Dimensions (W x D x H): 2.8 x 2.9 x 1.9 m Condition: good, ready to use

Retrofitted in 2005 electrical / CNC control Siemens 840 d Retrofitted in 2012 and 2019 mechanical what made. Technical datas: Rotary spindle speed: 1.25-600 tr/min Spindle maximum power: 55 kW 215 tr/min Horizontal run of the upright on the bench - X 15,000/30,000 mm . X travel 30,000 mm is for both machine Vertical stroke of carriage on upright - Y (mm) 5,600 mm Spindle stroke - 1,100 mm Z: Flowing stroke - w: 1,100 mm Advance - X: 3-5000 mm / min Feed - Y: 3-5000 mm / min Feedrate - Z: 1.5 2,500 mm / min Total weight: 100,000 kg Foundation pit OSTEO. for both machine Length x width x height: 40,000 x 5,000 x 1,800 mm all accessories are available and can be sold at extra costs. For both machines are the following attachments available: â?¢ Chip conveyor For both machines including lubrication and coolend unit for the cutting operation &aci ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16 Operating hours: 5859 Technical data Distance between centres: 610 mm Swing over cross-slide: 300 mm Swing over bed: 450 mm Max. turning diameter: 525 mm Spindle hole: 52 mm Turning diameter: 210 mm Turning length: 525 mm Carriage: Longitudinal travel (Z-axis): 560 mm Transversal strocke (X axis): 135 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 6 Inner cone diameter: 32 mm Indexing time: 0.7 sec Taper in spindle:: JIS A2-5" Spindle speeds: stepless from: 60 rpm up to: 6000 rpm Taper in tailstock: Morse taper: 4 MT Spindle stroke: 80 mm Spindle diameter: 75 mm Feeds: stepless longitudinal from: 1 mm/min up to: 15000 mm/min transversal from: 1 mm/min up to: 12000 mm/min Spindle motor: 11  ...

Turning Diameter 400 mm Turning Lenght 650 mm With C ,Y axes and subspindle Control Unit Fanuc 31i Can be inspected under power

1250 x 2500mm Siemens 840D 3200w

3000 x 1500m 10 kW Fiber laser cutting machine

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Swiss type CNC Manurhin KMX TWIN 207 is a double-spindle automatic machine with automatic feeding of bars. The CNC lathe was produced in 2000 in France. Technical data : - type of automatic lathe: Swiss Type - control: NUM - Swiss control - number of axles: 6 - turning diameter up to: 20 mm - diameter of passage Ø: 28 mm - number of turns: 150-8000 rpm - feed: 10/15 m / min - number of tools: 8 + 8 + 4 + 4 pcs - spindle power: 2.2 kW - tailstock: counter spindle - machine weight: 5000 kg Lathe equipment: - two main spindles / two opposite spindles - material feed with FMB Doppel-Turbo - counter spindle: 150-6000 rpm - chip conveyor - Manurhin / Schlichting-System clamps - coolant filtration