cnc 4 used for sale

CAN axis motor, positioning motor, linear drive, servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Homag, CAN axle motor -Type: PSE 411 C -Voltage: 24 V -Power: 30 watts -Speed: 90 rpm -Hollow shaft: Ø 14 x 20 mm -Dimensions: 155/55/H70 mm -Weight: 1.1 kg

max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 4 EW15° 4GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 3,75 EW20° 5GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 910 mm -Depth: 400 mm -Height: 1950 mm -Door: lockable, without key -Weight: 51 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 955 mm -Depth: 440 mm -Height: 1950 mm -Door: lockable, without key -Weight: 66 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 910 mm -Depth: 400 mm -Height: 1950 mm -Door: lockable, without key -Weight: 52 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 2 shelves -Width: 935 mm -Depth: 410 mm -Height: 2010 mm -Door: lockable, without key -Weight: 59 kg

Working widths: 4000 mm Roller width: 4200 mm Number of rollers: 2 Stück Supporting roller - dia: 490 mm Roller covering - soft rubber: 75 Grad shore Swimming roll - dia: 340 mm Roller covering - soft rubber: 75 Grad shore Pressure line: 50 N / mm Pressure total: 21 to Liquor trough with guide roll: heb + senkbar Cloth guiding system: Leitwalze vor der Fuge Drive side: Links Operting side: Links Compensator: pneum. Entlastung Drive shaft: Durchmesser 70 mm required power: 30 m/min =10 kW Hydraulic unit for combined pressure: • 2-Bowl-Finishing-Padder with 1 Swimming roll (S-Roll), • with double-trough for double-dipping • can be used as full-bath-dipping or indirect back swash • machine can be compeletely overhauled before delivery (The picture is showing a scheme of this padder type) • in addition a new frequency drive is possible for the adaption of this machine into a co ...

max. width of grinding wheel: 195 mm diameter / bore of grinding wheel: 75 mm Flange taper: Reishauer Grinding disc flange for machine type Reishauer RZ 400 For mounting ceramic grinding discs for tooth flank grinding - 125 mm wide, dimensions according to machine type Reishauer RZ 400 16 pieces available, price is per piece The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 935 mm -Depth: 400 mm -Height: 1950 mm -Door: lockable, without a lap -Weight: 78 kg

Power cables, extension cables -Extension cable: Length 25 m -Plug: Mennekes 13112 CEE plug 63 A 5-pin 400 V -Transport dimensions: Ø 600 x 190 mm -Weight: 26 kg

Sturtz welding and cleaning line Left-to-right direction SE-HSM-30/26 Compact 0.2mm 3000x2600mm P-260-WST 4AS-JC WST 25

Fischer 2051 (4051) Leaf blower for three-point attachment Cat. I and II, front or rear attachment. PTO drive 540 1/min. Turbine flow rate up to 300 m³ / min. . More green maintenance technology from A to Z and much more in stock - see sample photos! More objects also under > jodau > Used machines ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...

MR Etikettiertechnik model MR 413 self-adhesive labelling machine for vials, bottles, etc., suitable for round containers with a diameter of up to 80 mm, label height up to 150 mm, reel core diameter 76 mm, maximum outer reel diameter 350 mm, label press-on belt with a height of 150 mm, Open Date 53S thermal transfer printer for printing the variable data (expiry date, batch no., etc.) on the label with PCE Mini Smart camera system for the print verification, PCE pharmacode control, label presence control, reject of faulty vials/bottles when code and/or print are not valid or label is missing, electrics 230V/50Hz/2500W, compressed air max. 6 bar, includes Blume bottle infeed & outfeed table with a diameter of 1500 mm, required floor space including rotary tables approx. 6000 x 2300 mm (LxW), max. height approx. 1800 mm

Crane fork, loading fork, load fork, pallet fork, pallet crane fork, lifting equipment, roller lifter -Crane fork: with adjustable weight compensation -Type: Hoist 630x475 -Load capacity: 250 kg -Tin length: 490 mm -Usable height: 610 mm -Dimensions: 635/520/H795 mm -Weight: 21 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 2 doors, solid construction with 1 shelf -Width: 560 mm -Depth: 420 mm -Height: 890 mm -Shelves: See photos for layout/height -Door: lockable, without a lap -Weight: 47 kg

Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-10-20-PA-GF 4154799 -Piston: Ø 10 mm -Stroke: 20 mm -Sliding guide -Number: 3 cylinders available -Price: per piece -Dimensions: 45/33/H17 mm -Weight: 0.1 kg/pc.

drivers seat, forklift seat, tractor seat, tractor seat -Manufacturer: Klepp, drivers seat with suspension -Type: unfortunately without a type designation -Adjustable rails: with hand lever -Weight adjustment via handwheel -Dimensions: 500/470/H560 mm -Weight: 20 kg

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 480/70 -Elbe Art.No.: 0.107. see photo -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Dimensions: Ø 75 x 480 mm -Weight: 3.4 kg

Quick-release nut for balancing machine, clamping nut -Manufacturer: Haweka, quick-release nut for balancing machine -Item No.: 143 403 003 -Suitable for: Haweka ProGrip clamping devices with 40 x 3 mm shaft -Quantity: 2x quick-release nuts included -Price: per piece -Dimensions: 290/92/H80 mm -Weight: 0.7 kg/pc.

CNC control, card slot, control cards, plug-in cards, circuit boards, control rack, control unit -Manufacturer: Robosoft, Control Rack -Type: 411-1206 -Fuse block: 412-2240 -Circuit board: 413-0800 -Individual components: see photos -Price/Sale: complete -Dimensions: 500/195/H145 mm -Weight: 3.6 kg

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RV2021-4EA10 -Number: 1x switch available -Dimensions: 100/45/H100 mm -Weight: 0.4 kg

Square, locksmithsquare, hair square, precision hair square -Angle angle: Leg length 585 x 400 mm -Quantity: 3x angle brackets available -Price: per piece -Dimensions: 632/400/H35 mm -Weight: 6.3 kg/pc.

Angle bracket, locksmith square, flat angle -Flat angle: Leg length 400 x 195 mm -Quantity: 1x flat angle available -Dimensions: 400/195/H10 mm -Weight: 2.2 kg

Pökomat Steaker M 400-4, approx. 396 needles

Inv. Num. : 7711 Type: VM Multi 400-1 Producer: Schmalz Created: 2021 Parameters: Load capacity: 275 kg Weight: 75 kg

Stop square, locksmith square, control square -Manufacturer: Holex, stop angle DIN 875/1 -Type: 452510 100 x 70 mm -Accuracy level: 1 -Dimensions: 105/70/H20 mm -Weight: 0.3 kg

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch -Manufacturer: Hirschmann, Ethernet Switch Rail Switch -Type: SPIDER 4TX/1FX EEC -Dimensions: 115/80/H25 mm -Weight: 0.1 kg

electric motor, three-phase motor -Manufacturer: Caenaho, electric motor from milling machine Stankoimport 6P/2 -Type: 4AM 132 M2 Y3 -Power: 11 kW -Speed: 2900 rpm -Shaft: Ø 38 x 80 mm -Design: B3 -Protection rating: IP44 -Dimensions: 520/290/H340 mm -Weight: 82.1 kg

Control cabinet and distribution board construction, busbars, busbar supports, busbar adapters, OM adapters -Manufacturer: wöhner, busbar adapter -Type: EEC6080-L -Item No.: 32 466 -Number: 2x adapters available -Dimensions: 70/55/H200 mm -Weight: 0.4 kg

Control cabinet and distribution board construction, busbars, busbar supports, busbar adapters, OM adapters, load break switches, terminal blocks, load disconnectors, fuse load disconnectors -Manufacturer: Rittal, OM adapter -Type: SV 9340.460 -Quantity: 1x adapter available -Dimensions: 70/55/H210 mm -Weight: 0.3 kg

Control cabinet and distribution board construction, busbars, busbar supports, busbar adapters, OM adapters -Manufacturer: wöhner, busbar adapter -Type: EEC6080-L MCCB LUB 12 LUB 32 -Item No.: 32 427 -Number: 10x adapters available -Dimensions: 60/45/H200 mm -Weight: 0.3 kg

for sale GIS Piston Compressor GS25/150/400/T Boiler capacity 150 litres Suction capacity 400 min./l Motor 3 HP, 400 V mobile Total weight approx. 80 kg Other models available, inquiry to FSA Maschinen AG

Key data: 400 KW, 570 kVA, 400 V

Dear Ladies and Gentlemen, We hereby offer the following a MAN CHP in a container for rent! Year of construction 2014 Starts: 757 Hours: 11448 BH. Electrical Power: 400KW Thermal power 445 KW Dimensioning: Thickness: 100/140 mm insulation Length: 10000 mm Width: 2800 mm Height: 3200 mm Paintwork: Moss Green Contents in the container: MAN gas engine with generator on substructure Central heating Heat exchanger Switchboard Gas control unit Static power supply Exhaust silencer inside Auxiliary silencer above the container Insertion loss 65dBA in 10m Data recording Gas blower Combimac blue 65mbar gas pressure Gas Flow Meter Gas vacuum monitor Return temperature increase Exhaust gas heat exchanger with bypass Gas warning system Wind Vane Guardian Flame detector 1000 l each of used and fresh oil tanks with pump and hose reel Intrigued  ...

Auxiliary power switch, circuit breaker, fuse, line switch, miniature circuit breaker, load break switch, terminal block -Manufacturer: wöhner, fuse-switch disconnector, load break switch -Type: FSD-NH2 -Number: 2x load break switches available -Price: per piece -Overall dimensions: 285/210/H145 mm -Weight: 3.7 kg/pc.

Guide rail, servo motor, electric motor, DC motor, DC geared motor -Servo drive: with linear guide -Servomotor: EPH elektronik type DO31991373B00/4133 -Voltage: 24 V -Travel distance: 47 mm -Hole spacing: 285 mm -Dimensions: 640/110/H140 mm -Total: 4.9 kg

Hydraulic tank cap, tank cap -Hydraulic tank cover: from Atlantic ATS 3006 plate shear -Item No.: HMG 400 x 1 H -Dimensions: Ø 440 x 70 mm -Weight 14.5 kg

electric motor, three-phase motor -Manufacturer: Wolf, electric motor type 1LG4186-4AA60-Z 180L -Power: 22 kW -Speed: 1455 rpm -Protection class: IP55 -Shaft: Ø 48 x 110 mm -Design: B5 -Dimensions: 720/350/H450 mm -Weight: 184 kg

Key data: 320 KW, 400 kVA, 400 V

Make Iveco - AEM Model: 400 kVa diesel generator set Year of manufacturing: 1997 Serial nr: 12-8040-0001 Working hours (on servicemeter): 39 Capacity (KvA) 400 Capacity (Kw) 320 Engine make Iveco Engine model 8281-SRI-26SE Fuel Diesel Alternator make AEM Alternator model SE 315 L4 Voltage 400 Frequency (Hz) 50 Rpm 1500 Amperes (A) 577 Dimensions LxWxH (mm) 3250 x 1500 x 2100 ( set ) Weight (Kg) ca 3400 Total quantity in stock 1 Country of origin Set assembled in Germany Comments Used but almost new condition with 39 hours only, complete with panel and 2000 ltr fuel Bowser

PART NUMBER: 7343 SPECIFICATIONS - max width of the workpiece 180mm - max height of the workpiece 120mm 4 spindles: 1) Horizontal bottom 180mm 4kW 2) vertical right 120mm 4kW 3) Vertical left 120mm 4kW 4) Horizontal top 180mm 5.5kw - spindle diameter 40mm - all heads adjustable up/down, right/left - pressure on the insertion - 6 leading, pulling, toothed shafts from the top, including 1 double - double lead-out, pulling, rubber shaft at the top - leading, pulling, toothed, wide, metal shaft at the bottom - Lead-out, pulling, metal, smooth shaft at the bottom - feed motor 2.2kW - feed on cardan shafts - Infinitely variable feed speed - Electric planing thickness setting - lifting motor 0.75kW - length of the introductory table 1580mm - extraction spigot diameter 4x120mm - dimensions length/width/height 3040x1500x1700mm - weight about 2800kg ADVANTAG ...

Robot Laser Welding and Cutting Cell / Laser cutting and welding cell Year of manufacture 2018 Wenige Arbeitsstunden / not many working hours Robot Fanuc M-710iC/70 Control CNC: Fanuc R-30iB) + MFP Payload / lifting max: 70 kg Repeatability: ± 0.04 mm Working range: 2050 mm IP54 Fiberlaser source: IPG Photonics Model YLS-4000-S2T-Y16 Power: 4kW Cooling system. Two outputs optical and permanent connections of welding and welding Laser Cutting Heads / Two outputs optical and permanent connections of welding and laser cutting heads. Source dimensions: 856 x 806 x 1206 mm; Weight / weight: 330 kg; Power supply: 400–460 V/3P + PE at 50–60 Hz; Operating current at: 4000 W and 400 VAC: 20 A Laserschneidekopf / laser cutting head: HIGHYAG BIMO-FSC Laserschweißkopf / laser welding head: IPG Photonics. FLWO-D30 Vertical Welding: Fronius 7000 Doppe ...

Centrifuge for lateral feeding of an extruder with flakes / scrap the centrifuge is equipped with a loading tank previous use was on a 100 mm extruder with a conveying capacity of approx. 330 kg for PET flakes at call

Reluctance motor, electric motor, three-phase motor, geared electric motor, reluctance motor -Power: 7.5 kW -Speed: 1450 rpm -Design: B5 -Shaft: Ø 38 x 80 mm -Protection class: IP 54 -Quantity: 1 available Price: per piece -Dimensions: 495/300/H355 mm -Weight: 52 kg

Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking -Cantilever rack: two-sided, height 4000 mm -Stands: 5x 340/150/H4000 mm / 350/300/3400 mm -Cantilever arms: 70 pieces 140/140/1500 mm -Cross braces: 124 pieces 60/40/1350 mm -Submission/Price: complete -Weight: 4100 kg

Height 2100 mm Width 1300 mm Length 3000 mm Capacity 450 l Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Stirrer Type Z Type Agitators Product ejection Ejection via hydraulic tilting of the mixer bowl Loading Loading integrated into the machine Mixer Type Open Mixer Number of rollers Twin shaft

Stainless steel, round steel, warehouse liquidation, 1.4104, X14CrMoS17, D150x1057mm, , new -50% Special price This stainless steel comes from a stock liquidation of a certified production company, so we offer an absolute special price. We have other diameters with this quality in stock. Buy a larger quantity we will still accommodate you in price. D 150mm x 1057mm lg, 147 kg, peeled. Material: X14CrMoS17 Material number: 1.4104 Condition: peeled The material was analysed using a hand-held spectrometer and is available from us. Material certificate is not available. A heat-treatable, martensitic, stainless free-cutting steel with 17 % chromium and molybdenum addition, which is alloyed with sulphur to improve machinability. The higher sulphur content reduces corrosion resistance and toughness. Not for cold forming and joint welding. 6 month warranty according to our gen ...

MACC Metal Band Saw Special 411 CSO Aut. Lowering Section cap. round up to 300 mm 2 speeds 38 + 77 m/min. Motor 1.6 kW, 400 V incl. machine base Weight approx. 530 kg

Press force max.:: 1600 kN heating plates:: 400 x 400 mm electrically heated:: -- °C heating power:: 9,92 kW piston stroke:: 400 mm no. of stages:: 1 Condition: Used, Specification: Press 400 x 400 mm, second-hand steel frame construction - Clamping force: 160 tonnes - pressure force: 1600 kN - Operating pressure: 300 bar - Closing: from bottom to top - Heating platens: 2 electric platens - Heating power: 4.96 kW/platen - Heating platen dimensions: 400 x 400 mm - Specific pressing pressure: 1000 N/cm² - Distance between the heating platens: 500 mm - Piston stroke: 400 mm - Piston diameter: 260 mm - AC motor power: 7.5 kW - Pneumatic protective cover in the front area, - lifting device - Sliding table - Approx. dimensions: 1,760 x 1,150 mm - System height approx.: 2,470 mm - Weight approx.: kg The data for this ad was cr ...

Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Solid rubber tires: Solid rubber wheel, solid rubber bandage -Tire size: Ø 400 mm -Inner diameter: 276 mm -Quantity: 20 tires available -Price: per piece -Dimensions: Ø 400 x 78 mm -Weight: 5 kg/pc.

Distance between points: 760 mm, Max travel Z axis: 650 mm, Maximum length to be rectified: 430 mm, Ø max to be rectified: 250 mm, Height of points: 125 mm, Ø max. molar: 500 mm, Max travel X axis: 320 mm, cnc brand: FANUC, cnc model: 18i-T, Ø max. wheel: 400 mm, main motor power: 7.5 Kw, Z and X axis resolution: 0.1µmm, Distance between centers: 430 mm, Workpiece head cone: MORSE 5, Ø of the workpiece head hole: 38 mm, tailstock cone: MORSE 4, Accessories: FELSOMAT gantry loader with SIEMENS CNC; Refrigeration equipment with paper filter; Forkardt automatic mooring plate; automatic tailstock; Cooled grinding wheel shaft; Spare ball screw; MARPOSS Automatic Grinding Wheel Balancer and Gauge , Dimensions (length x width): 2500x2000 mm, Weight: 4700 Kg