cnc 4 used for sale

saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 130 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 110 x 125 mm saw blade turning speeds: 3000 U/min total power requirement: 1,75 kW weight of the machine ca.: 140 kg dimensions: 1,0 x 0,65 x 1,5 m Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 1300 kN injection volume: -- cm³ screw diameter: 45 mm platen size: 470 x 470 mm Condition: used, Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350 Injection unit: - Screw diameter: 45 mm - Centring ring diameter: 125 mm - Shot weight max.: 210 g (PS) - Injection pressure: 1,840 bar Clamping unit: - Clamping force: 1300 kN - Opening stroke max.: 850 mm - Mould installation height: min. 275 mm - Mould mounting platens: 470 x 470 mm - Operating hours approx.: 91,000 - Core pulls: 1x - Valve gate: 1x pneumatic - Hot runner control points: 12x - Temperature control unit interfaces: 6x (20 mA) - Conveyor belt in the machine - Selector unit. available - Release for high temperature up to 450°C - Communication card for ProSeS interface available - Robot interface available. Technical pr ...

Safety relay, safety control, emergency stop switch, switching device, safety sensor, safety switching device, evaluation device -Manufacturer: pilz, safety relay safety switching device -Type: PNOZ 1 24VDC 3S10 -Id.no.:475695 117758 -Number: 1x relay available -Dimensions: 110/90/H80 mm -Weight: 0.4kg

power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply -Manufacturer: Block, AC/DC Power Supply -Type: GLC 400/24-3 -Quantity: 1x module available -Dimensions: 140/75/H90 mm -Weight: 2.3 kg

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder -Shaft: Ø 16 x 400 mm -Dimensions: Ø 97 x 570 mm -Weight: 3.9 kg

For sale is a processing plant for third-party take-back polystyrene - fully functional. Feeding table: 2000x2000x900 Belt conveyor: 1420x4000 Slope: 21° Transport speed: 4-16 m/min Design: (50Hz):8m/min Styrofoam mill: 2180x2496x1590 Filling opening: 1500x1000, weight 1500kg

Used 250 L dough mixer by Diosna type W 402 A with three tanks. The machine has one speed.

energy chain, cable drag chain, energy guiding chain, cable chain, drag chain -Manufacturer: IGUS, energy chain cable drag chain 2 pieces -Length: 4250 mm -Width: 240 mm -Bending radius: 160 mm -Accessories: incl. clamps see photos -Transport dimensions: 920/890/H480 mm -Weight: 43 kg

three-jaw chuck, three-jaw lathe chuck -Manufacturer: Bergmans, three-jaw chuck type 4110 chuck size Ø 255 mm -Passage: Ø 65 mm -Bolt circle: Ø 140 mm / M12 -Dimensions: Ø 255 x 140 mm -Weight: 31 kg

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope -Stainless steel cable: Crane cable Ø 4 mm type 7x19-4MM -Length: 500 m -Standard: AISI 316 -Price: complete -other crane ropes also available -Transport dimensions: Ø 300 x 270 mm -Weight: 34.4 kg

steel ruler -Manufacturer: Hoffmann, precision steel ruler, stainless steel, length 2000 mm -Art.No.: 461400 2000 -Dimension 2040/30/1 mm -Weight: 0.5 kg

crane block, crane hook, load hook, single hook -Crane hook: load hook with holder -Load capacity: kg -Dimensions: see photos -Dimensions: 490/160/H1090 mm -Own weight: 81 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Charger for forklifts: Miditron Type D 400G 48/100 PWF-PMT -Input voltage: 400 V 50 Hz -Power: 48 V/100 A -Dimensions: 555/530/H690 mm -Weight: 112 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 6-groove pulley type SPB 450 x 6 TB 4040 -V-belt width: 17 mm -Mounting: Taper bushing Ø 80 mm (can be changed) -Dimensions: Ø 455 x 120 mm -Weight: 42 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not driven -Roll width: 480 mm -Rollers: Ø 80 mm -Roll spacing: 200 mm -Dimensions: 1920/520/H150 mm -Weight: 50 kg

Inv. Num. : 7155 Type: UR4-4DD-UF6 Producer: HMP Created: 2000 Parameters: Max. diameter: 25 mm Components: Reducing hammers with 4 segments 6-segment roll forming hammers

Heating- and drying oven for temperatures from +20°C up to 300°C. Special turnstile drive for 1L bulkhead jars, TwinDISPLAY. Max. loading of chamber: 300 kg.

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder 2 pieces -Type: 40 x 27 x 315mm / 40 x 27 x 400mm -Shaft: Ø 27 mm -Price/Delivery: complete -Transport dimensions: 595/130/H70 mm -Weight: 10.5 kg/total

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder -Type: SK40 x 40 x 400 -Shaft: Ø 32 mm -Dimensions: Ø 62 x 590 mm -Weight: 8.6 kg

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder -Type: SK50 x 22 x 400 -Shaft: Ø 22 mm -Dimensions: 600/90/H93 mm -Weight: 5.9 kg

Key data: 1100 , 40

Screw diameter; 40 mm Injectable volume: 201 cm3 Injection pressure: 1859 bar Turntable: 1040 mm Mould thickness min: 300 mm max: 600 mm Cores: 3 Robot Interface: Yes Mold Heating Zones: 8

transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Legrand, Transformer Transformer -Type: 42304 -Power: 160 VA -Dimensions: 150/110/140 mm -Weight: 4.6 kg

conveyor belt, belt conveyor, transport belt, belt conveyor -Conveyor belt: Conveyor belt stainless steel with mesh belt -Speed: 27 m/min -Conveyor belt width: 420 mm -Conveyor belt length: 1000 mm -Motor: DRdrives 0.18 kW see photo nameplate -Dimensions total: 1010/700/H185 mm -Weight: 36 kg

PLC controller, electronic module, PLC control -Manufacturer: Mitsubishi, Programmable Controller -Type: FX2N-48MR-DS FX2N-5A FX2N-2LC -Individual components: see photos -Price/Fee: complete -Dimensions: 290/85/H95 mm -Weight: 1.3 kg

Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, incremental encoder -Manufacturer: Heidenhain, Incremental Encoder -Type: ROD 426.000B 9000 -Art.No.: 295 434 GK -Shaft: Ø 6 x 11 mm -Dimensions: 170/150/H60 mm -Weight: 0.4 kg

gear motor, electric motor, electric gear motor -Manufacturer: ABM Baumüller, gear motor type IIb / DLB 421 -Speed: 50 rpm -Power: 0.8 kW -Design: B3 -Shaft: Ø 35 x 80 mm -Dimensions: 475/240/H235 mm -Weight: 38 kg

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt conveyor belt unused -Width: 140 mm -Length: 4300 m -Transport dimensions: Ø 220 x 140 mm -Weight: 2.6 kg

RECON Part Number: 1.60.6-26.60.01-06 Kolbenschmidt 1. Ring groove: 0.75mm ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

max. wheel diameter: 420 mm gear width: 120 mm max. module: 8 min. module: 0,5 control: BWO CNC no. of strokes: 32-800 Hub/min total power requirement: 50 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,3 x 3,9 x 3,4 m Machines increase 100 mm intermediate plate automatic Hublageverstellung automatic Hublängeverstellung 5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knives 4 pieces -Type: R320 5 220 428 92 -Price/Delivery: complete -Dimensions: 330/300/H80 mm -Total weight: 5.6 kg

Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knife 2 pieces -Type: R320 5 220 428 92 -Price/Delivery: complete -Transport dimensions: 370/230/H40 mm -Weight: 2.8 kg

Recon Catalog number: 1.2510 (1.64.6-25.10.01-04A) Sanded to 1 level undersize ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

saw blade, wood saw blade, circular saw blade -Manufacturer: AKE, saw blade 904-12 -Type: Ø 400x3.5/2.8x60 Z 72 = T 18.32 -Art. No.: 0211-5107670X HW -Speed: n max. 4300 rpm -Number: 3x saw blade available -Price: per piece -Dimensions box: 490/490/H10 mm -Weight: 3.2 kg/piece

Vacuum cleaner motor, radial blower for sweeper, radial blower, fan, blower -Manufacturer: SPAL, radial fan from sweeper Hako Hamster 500 E -Type: 008-B37/C-42D -Voltage: 24 V -Connection input: Ø 70 mm -Connection output: 100 x 45 mm -Dimensions: 150/120/H145 mm -Weight: 0.7 kg

Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. filling: 300 kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 Volt Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. Loading: 300 Kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 V

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Steel, crane chassis without drive -Beam width: adjustable, set to max. 130 mm -Load capacity: kg -Dimensions: see photos -Dimensions: 405/360/H350 mm -Weight: 43 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: blank Ø 460 x 5 mm -Inside: Ø: 50 mm -Bolt circle: Ø 100 x 18 mm -Number of teeth: 54, see photo -Weight: 5 kg

clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Clamping surface: 405 x 300 mm -Material: steel -Dimensions: see photo technical drawing -Dimensions: 405/300/H200 mm -Weight: 49 kg

clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, -Clamping plate: surface plate, marking plate -Size: 415 x 250 mm -Height: 60 mm -Dimensions: 415/250/H60 mm -Weight: 45 kg

Catalog No. : 7418 Type: Concept 420/810-2300 Producer: Demag Made in: 2006 Characteristic: Clamping force: 420 t Closing force: 4200 kN Screw diameter: 70 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of the plate for mounting the mold: 1200 mm Width of the plate for mounting the mold: 1100 mm Distance between the columns (horizontal): 800 mm Distance between the columns (vertical): 710 mm Maximum injection pressure: 1877 bar Mold height: 820 mm Machine length: 7800 mm Machine width: 2200 mm Machine height: 2400 mm Weight of the injection molding machine: 20000 kg

test mandrel, tool holder, milling holder, milling tool -Manufacturer: Bahmüller, boring bar -Length: L= 158.406 mm -Radius: R= 19.937 mm -Recording: HSK50 -Dimensions: Ø 50 x 183 mm -Weight: 1.6 kg

sunroof, glass roof, car glass roof, tilting roof, pop-up sliding roof -Manufacturer: Monza, sunroof type Air Light 1 Ovp -Size: 780 x 410 mm -Dimensions box: 780/410/H55 mm -Weight: 5.3 kg

Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Manufacturer: Würth, workshop trolley, sturdy tool trolley -12 drawers: lockable, see photos for layout -Dimensions total: 680/460/H1045 mm -Weight: 70 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, immersion pump -Cooling water pump: coolant pump -Engine: Cantoni 3.0 kW -Immersion depth: 450 mm -Dimensions total: 500/340/H880 mm -Weight: 74 kg

- Model: F 385.41 - 4 cartons of 3 x 2 bottles per operation - Boxes : many different sizes - Full carton control: With bottle counter system - With bottles of single-breasted MASPACK 110/14/RED (2006) for pressureless lining of bottles - Machine in perfect condition

Heat recovery system wit 450ltr enameled tank + double wall heat exchanger for DHW. Good condition. Prepare to connect for Your refrigeration system. 450ltr+108/21x16/10 (1,6) 450ltr+76/10x16/10 (1,4)

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 465 mm -Piston rod: Ø 40 mm -Holes: Ø 35 mm / distance retracted 795 mm -Dimensions: 860/86/H127 mm -Weight: 24.6 kg

Ransomes - Parts // also Agria Iseki Jacobsen SABO Shibaura Toro Used parts and components available from stock for: 213 D, 350 D, Commander 3510, Fairway 405, MK IV, MK 11, Rider J74: mowing spindles, hydraulic components, engines, axles, wheel drives, hydrostats, hydraulic pumps, wheels and tires, steering parts, steering orbit rollers, etc. Other miscellaneous parts of Agria 9300, Jacobsen HR5111; 1471, Gutbrod 2850DA, Iseki div., Hako 1800-2750, John-Deere div., Sabo 1203; 1500; 1502D; RS84 Senior, Shibaura SP1840; CM364, Toro Pro81 etc. ... Complete spindle units and 3-fold cylinder mowers Bucher, Loipfinger, Jacobsen as well as Ransomes and SABO Info and offers on request. No sending of package deals or lists.