cn used for sale

Working field: axis x: 3200 mm, axis y: 944 mm, axis z: 110mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill holder: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 24 horizontal spindles in X, 10 vertical spindles in X line Working pressure air pressure: 6 bar Installed power: max 25 kW Capacity of vacuum tools: 40 m³/h CNC: screen: monochromatic 9” Floppy disk unit

Working area: X 5200 x Y 1260 mm Heading of main spindle: X 5709 mm, Y 1650 mm 8 workpiece consoles Equipment: Drilling unit with 18 spindles, 12 vertical spîndles, 6 horizontal spindles (4 in direction X , 2 in direction Y ) Grooving saw Milling motor 11 kW, 20000 rpm max, HSK-F 63 take-up, liquid-cooled, 5-axis controlled Tool changer with 16 positions Laterally positioned changer with 8 positions PC control

Working field: axis x: 2310 mm, axis y: 628 mm, axis z: 90mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill chuck: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles in X, 12vertical spindles in X line Working air pressure: 6 bar Max consumption of compressed air: 0,75 NL/cycle Installed power: max 7.5 kW Capacity of vacuum tools: 40 m³/h CNC: screen: monochromatic 9” Floppy disk unit PLC for control of the machine cycle

X=3700mm Y=1440mm, Z=150mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 8 supports with vacuum cups, pneumatic clamping 8 fences at the rear 8 fences in front 2 left fences and 2 right fences 6 rails for panel loading with pneumatic lifting Positioning the vacuum cups using a laser 1 connection for templates Vacuum pump with flow rate 100 m3/h Configuration V25,H8X/6Y, N1 X-Y 90°, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rear Main motor 15 kW, 1250-24000 rpm, air-cooled, 360° C-axis, C-axis interpolation axis, HSK 63 mounting C axis extension for flex-5 aggregate Main motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mounting Tool changer operating in X direction with 14 positions, rear mounted 2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins 14 horizontal drilling spindles 90° groove saw X-Y direction PC 85 power control software with: Woodwop: workshop-oriented prog ...

Manufacturer: EMCO Model No.: EMCOMAT-E300 Year: 2003 Condition: Used Stock number: 9613 Maximum turning length: 1500 mm Max. turning diameter: 550 mm Maximum length of travel in the X-axis: 108 mm

The machine is in good technical condition; testing is possible by prior arrangement. Dimensions (m): 8.8 × 2.25 × 3 (estimated). Magnet (mm): 3500 × 700.

The machine is in good technical condition; testing is possible by prior arrangement. Power input (according to records): 110 kW. Dimensions (m): 8.2 x 1.85 x 2.6. Magnet (mm): 4200 x 600. Motor power and grinding head diameter: 90 kW, Ø 800 mm.

CITIZEN CINCOM L 12 VII is a CNC Drehautomat, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Ø 12 mm, Länge 135 mm, Spindeldurchlass 20 mm; X1 32, X2 30, Y1 40, Z1 135, Z2 30; 27 Pos., 8 angetriebene Werkzeuge. Daten: Hauptspindel bis 15'000 t/min, Werkzeuge 10'000/9'000 t/min (0,75 kW), Gegenspindel bis 10'000 t/min, C-Achse 0,001°, Eilgang 35 m/min, 3×400 V 50 Hz, 6,1 kVA, Gewicht 1700 kg, L1760×B820×H1610 mm. Zubehör: LNS EXPRESS 112 Lademagazin, Feuerlöschanlage KRAFT & BAUER. Erreicht enge Toleranzen; Branchen: Automotive, Uhrmacherei, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

\"CAPACITY : . Maximum rotating diameter 380 mm . Maximum turning diameter 250 mm . Maximum turning length 200 mm . Spindle centre distance 500 mm SPINDLE : Spindle nose asa 6 . Self-centering diameter 210-250 mm . Front bearing inner diameter 100 mm . Spindle rotation speed rpm 4000-6000 . Spindle motor power S1 kw 9 . Spindle motor power S2 kw 11 . Maximum torque Nm 210 WAGON : . Useful travel X axis mm 150 . Useful travel Z axis mm 240 . Encoder X/Z-axis transducer . Ball screw diameter X/Z mm 32 . Fast travel speed X/Z axis m/min 30 TOWER . Number of 8x2 stations . VDI 30 tool holder . External tool section 20x20 mm . Diameter of boring bar holder 32 mm . Turret indexing time sec 0.10 . Power of driven tools kw 3.7 . Maximum torque of driven tools Nm 30 NUMERICAL CONTROL : GE FANUC series 18i-T \" Auction-ID: A7-50976-4

\"X\" axis travel: 220 mm \"Z\" axis travel: 410 mm Turning diameter above the transverse carriage:350 mm Spindle motor power: 15 kW Feather line: 500 mm Spindle bore: 51 mm Spindle nose: 6 Max. spindle speed: 4000 rpm Min. Spindle Speed: 25 rpm\" Auction-ID: A7-50976-3

• CNC machining centre • Serial number 0-250-06-1632 • Total installed power approx, 18 KW • Useful working area approx, 2750 x 1000 mm • Travelling way X-axis: 3455 mm, Y-axis: 1480 mm, Z-axis: 260 mm • Maximum travel speed in the axes direction x-y-z: 80-60-20 m/min • Tool magazine with 8 positions •  Electrospindle: power 7,50 KW-max, 24000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Milling / saw group with 1,50 KW motor • Saw unit to groove • Vertical drilling spindles in X-axis direction: 11 • Vertical drilling spindles in Y-axis direction: 8 • Horizontal drilling spindles in X-axis direction: 3 + 3 • NUM 1040 numerical control • Software Windows 95 / HOMAG WOODWOP • 6 consoles with 2 vacuum suction cups each • 6 lifting modules for heavy workpieces • BECKER KVT 3,100 vacuum pump with capacity 100 m ...

\"GENERALI Supply voltage 380V 3 - ‡ 5% 50 Hz Installed power kW15 Hydraulic working pressure bar 70 C.N.C. 8 simultaneous axes (Expandable up to 16) Display Color Operating temperature +5 / +40 degrees Vector Motorization Axis position detection By optical scale Refrigeration flow rate lt/m 50 Tank capacity 150 lt MAX. BAR DIMENSIONS Round, diameter 60 mm Hexagon, key mm 52 Square, side 42 mm MAX. THREAD DIAMETER Taps and dies aluminium brass M 42 Taps and dies mild steel M 30 Snap-on die or rolling head According to die capabilities Finger thread mm 60 DIMENSIONS AND WEIGHTS Occupied area mm 2620x1300 Height 2450 mm Net weight (approx.) kg 2800 Packaging dimensions mm 2800x1500x2500 Box volume 7.5 m³ SPINDLE Motor power (Vector) KW 12 Speed range rpm 25-3000 Transmission motor coupling A by means of toothed belt TURRET SLIDE Rapid speed mm/1' 10000 Maximum turret carriage stroke mm  ...

• Lot of 4 numerical control motherboards • It includes: • 1 x FANUC OM-MODEL B A02B-0091-B501 motherboard: year 1988 • 3 x FANUC OM-MODEL A A02B-0089-B501 motherboard: year 1989 • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-524

Capacity: 15 m³/h, Delivery height: 165m, Speed: 2.900 rpm, NPSH: 1,8 m. Auction-ID: A1-50340-4

Capacity: 20m³/h, Head: 155m, Speed: 2.900 rpm, NPSH: 2.5 m. Please note! No motor on this pump. Auction-ID: A1-50340-11

Auction-ID: A7-50976-2

Maximum bar diameter 75 mm Maximum spindle speed Rpm 3000 Vector motor power Kw 12 Maximum torque Nm 230 Maximum turret stroke 180 mm Maximum distance between turret and clampmm 290 Minimum distance between turret and gripper mm 110 Tool holes Nr 6 Diam. Of turret holes mm 31.75 Rapid slide speed m/min 10 Maximum thrust force daN 1200 Gearbox speed (indexing) sec 0.3'' Tool detachment mm 0.2 Slide X1,X2, X3,X4 nr 4 Maximum stroke 70 mm Quick speed m/min 10 Maximum force daN 1200 Slide Z2 Nr 1 Maximum stroke Z2 mm 120 Rapid speed Z2 m/min 10 Maximum force Z2 daN 1200 Hydraulics with C.N.C. management Max bar 35 Pliers system in use Din 6343 C.N.C. numerical control Axes 8 Installed power Kw 18 Working pressure Bar 70 Refrigeration flow rate Lt/m 50 Tank capacity Lt 200\" Auction-ID: A7-50976-1

SMEC SL 3000 BLMYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mmTurning length : 956 mm____________Description:Main Spindle:Technology:Belt-driven spindleSpeed (max.):3,000 rpmPower (max.):26 kWBar capacity:91 mmWorkpiece clamping:3-jaw chuck, SAMCHULLY HS-12Tool holder:Technology:12-station turretTool holder:BMT65Tool drive:5,000 rpmTravel in X/Y/Z:215/-/560Main Spindle:Technology:Trailed tailstockStroke:100 mmQuill diameter:110 mmTaper:MT5Main Spindle:Chip Management:Chip ConveyorCoolant Management:IKZ Pump with Oil Skimmer and High Pressure, 10 barTool Measurement:Automatic Measuring ArmAutomation:PreparedFinished Part Removal:Part Catcher with Collection BoxSetup Mode:Electronic Handwheel

Key data: 915 mm, 6000 mm

1 turning and milling center Make: Mazak Model: Integrex 650 H Year of Make: 2004 CNC control. Mazatrol 640 NT-Pro Turning diameter: 915 mm Turning length: 6000 mm Equipment / Accessories: Drill rods Tool measuring device Tool Changer 2 automatic setting sticks diameter 190 – 350 mm 1 automatic setting stick diameter 50 – 268 mm 1 manual setting stick diameter 400 - 610 mm 1 three-jaw chuck diameter 630 mm Cooling lubrication system Coolant tank 1150 l Coolant pump 70 bar otherwise according to the technical data in the appendix. Machine has been regularly serviced and is in very good condition.

CNC lathe GILDEMEISTER CTX 420 linear With control Heidenhain ELTROPILOT 4290 Year of Make: 2003 Max. rotatable diameter: 324 mm Max. rotatable length: 600 mm Max. circumferential diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed revolver Various tool holders VDI 40 Tailstock with quill Chip conveyor Hydraulic jaw chuck SMW Autoblok 0 250 mm Foot switch for jaw chuck + tailstock adjustment Oil mist extraction Coolant Setup Operating Instructions

The machine is in good technical condition; it can be tested by prior arrangement.

EMCO Emcoturn 332 MC PlusYear of manuf. : 2006 Control : Siemens 840D - Powerline Turning diam. : 140 mmTurning length : 480 mm____________Description:Mainspindle:Technology:Belt-driven spindleSpeed:6.300 rpmPower (max.):10 kWTorque (max.):78 NmC-Axis:0,001°Barcapacity:45 mmWorkpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axfix Gr. 65Subspindle:Technology:Belt-driven spindleSpeed:7.000 rpmPower (max.):10 kWTorque (max.):45 NmC-Axis:0,001°Workpiececlamping:3-Jaw chuck, Röhm KFD-HS 130-3Movement in Z:510 mmRapid travers in Z:24 m/minToolcarrier I (X/Z):Technology:Turret with 12 stationsTaper:VDI25Tooldrive:6.000 rpm, 7,5 kW, 12 NmMovement in X/Z:160/510 mmRapid travers in X/Z:20/24 m/minToolcarrier II (X):Technology:Turret with 12 stationsTaper:VDI25Tooldrive:6.000 rpm, 7,5 kW, 12 NmMovement in X:140 mmRapid travers in X:20 m/minEquipment/Accessory:Chipmanagement:Chip  ...

turning diameter: 8 till 38 mm turning length: 250 mm control: Fanuc total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: - mm turning length: 210 mm control: Fanuc total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 350 mm turning length: 200 till 1040 mm control: OSP-P200L total power requirement: kW weight of the machine ca.: 11000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 820 mm turning length: 2000 mm control: Siemens 840 D z-travel: Z1=1980 Z2=2290 mm x-travel: X1=500 X2=500 mm workpiece weight: 1600 kg spindle nose: A15 main spindle bore: 160 mm feeds x-axis: 0,1-18.000 mm/min rapid traverse X-axis: 18 m/min feeds z-axis: 0,1-24.000 mm/min rapid traverse Z-axis: 30 m/min turret I: 16 Wkzg. turret II: 16 Wkzg. tool taper: Capto C6 voltage: 400 V main spindle speeds:: 1-2.500 U/min total power requirement: 180 KVA weight of the machine ca.: 36 t dimensions of the machine ca.: 9,7x2,5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 350 mm, 1050 mm, 3500 1/min

For sale is a 1998 Daewoo Puma 350A CNC lathe with Fanuc Series 18-T control. The machine is functional and is currently still in production. It will continue to be used in our production until it is sold. The sale is taking place because we put a multitasking system into operation about half a year ago and the training has now been completed. The Daewoo Puma 350A will therefore no longer be needed in the future. Equipment and scope of delivery: CNC control Fanuc Series 18-T Two-stage spindle gearbox for high torque reserves and high-performance machining Quill VDI-50 Tool Holders All tool holders belonging to the machine are included in the sale Without extraction system (this is defective) Inspection expressly desired. The machine can be viewed and demonstrated during operation by appointment.

Key data: 381 mm, 533 mm, 4000 1/min

CNC Lathe – HAAS ST-25Y Manufacturer: Haas Model No.: ST-25Y Year: Not specified Location: Belgium Type: CNC lathe with Y-axis and C-axis Swing over bed: 381 mm Distance between centres: 533 mm X-axis travel: 214 mm Z-axis travel: 533 mm Y-axis: Yes C-axis: Yes Spindle nose: A2-6 Spindle bore: 76 mm Spindle power: 22.4 kW Maximum spindle speed: 4,000 rpm Tool turret capacity: 12 motorized positions (VDI) Chip conveyor: Yes Tooling: Wide selection included Dimensions (L × W × H): 3,180 × 1,980 × 1,960 mm Weight: 6,000 kg

Key data: 1250 mm, 7000 mm

CNC lathe, Heyligenstaedt, overhauled in 1998 Turning diameter 1250 mm Distance between tips 7000 mm Swivel diameter above the carriage 1000 mm Swivel diameter above the bed 1250 mm Chuck diameter 1250 mm Automatic tool holder and tailstock Spindle bore 150 mm

Main spindle: Speed 4,000 rpm Power 18.5 kW Bar passage 65 mm Sub-spindle: Speed 4,000 rpm Power 11 kW Bar passage 65 mm Ejector: Hydraulic with flushing Travel in Z 520 mm Rapid traverse in Z 30 m/min Tool carrier I (X/Y/Z): Technology 10-station turret Tool holder VDI30 Tool drive 4,000 rpm, 4 kW, 16 Nm Travel in X/Y/Z 140/70/450 mm Rapid traverse in X/Y/Z 15/6/30 m/min Tool carrier II (X/Z): 10-station turret Tool holder VDI30 Tool drive 4,000 rpm, 4 kW, 16 Nm Travel in X/Z 140/450 mm Rapid traverse in X/Z 15/30 m/min Equipment/accessories: CNC Control TX 8i Chip management Chip conveyor Coolant management Mahle coolant plant with paper belt filter Bar Feeder, FMB Turbo 8-80 - 3m Length Precast Removal Hydraulic Parts Gripper with Conveyor Belt Oil mist extraction

KERN CNC Cycles Lathe from 2010 for sale.

DATRON MLCube B CNC gantry milling machine – Year of construction 2019 - Professional high-speed CNC milling machine with ± 6,000 operating hours. - Working range X/Y/Z: 1,520 × 1,020 × 245 mm. - Water-cooled HF spindle 1.8 kW – 48,000 rpm, HSK-E25. - DATRON HSCpro control with DATRON next terminal. - Automatic tool changer with 12 positions. - Unique 4-fold synchronous driven rotational axis construction with pneumatic tailstocks. - Including industrial Ringler/Kärcher extraction system (5.5 kW) with custom-made pipe construction. - Includes vacuum clamping, 3D probe and minimum lubrication. - Complete, comprehensively equipped CNC installation, suitable for precision machining and series production. Auction-ID: A3-46142-20703

Brand: Metaleen Tools & Equipment (visible on the frame of the machine). Type: WE67K-160T/3200. Year of manufacture: 2025, deduced from the serial number/order date. Serial number: 2025040195. Capacity t: 160 tons. Working length mm: 3200 mm. Control, brand, type: Delem DA-53T-[N], serial number 244400017, Delem PN D8087-007, software version V1.8.23, produced by Delem, Eindhoven (NL). Auction-ID: A3-46142-11241

an industrial CNC controlled sawing machine installation of the brand Calvet, equipped with associated peripherals (dust extraction and compressor). I'll list everything neatly for you: Main installation Brand & type: Calvet (Italian brand specializing in machines for aluminum, PVC and metalworking). This type is a double miter saw (usually used for aluminum profiles, PVC windows/doors and light metals). Equipped with CNC control (touchscreen panel visible on the machine). Lockable protective cover for safety. Automatic feed rail and positioning. Function: Precise cutting of profiles in double angles (left & right) with high precision. Mainly used in window construction, façade construction, industrial aluminum constructions. Extraction system Brand: Italy Vacuum s.r.l. Model: Vortex 58 FT Year of construction: 2022 Specifications: Power: 2.2 kW Power supply: 400 V / 3-p ...

Working condition at 0.03mm - lubrication broken - Including extra parts Auction-ID: A3-46142-16606

Auction-ID: A3-46142-11326

Features: Brand: Micro-Vu Model: Excel 1601 UM Type: Optical Measuring Machine / CNC Metrology System Measuring range: 1,650 × 1,050 × 160 mm Ruler resolution: 0.1 μm XY accuracy: ±(4.2 + L/200) μm Z accuracy: ±(2.8 + L/100) μm Table load capacity: 100 kg, distributed load Zoom: 36× (12× optical + 3× digital) Screen magnification: 15× to 540× / 30× to 1080× Camera: Black and white Lighting: Macro Ring Light Computer that comes with Windows 11 Metrology software: InSpec Rev. 2.97.10 Last calibration/calibration: January 2026 Condition: Pre-owned, in very good condition Heavy wooden pallet dedicated to transport included Machine dimensions: Approx. 2,600 × 1,720 × 1,650 mm Weight: ± 3,450 kg Transport dimensions according to the data sheet provided: Approx. 2,900 × 1,970 × 1,900 mm Shipping weight: ± 4,300 kg Auction-ID: A ...

must be demoted yourself lifting bridge and forklift is available and can be used machine is in working condition Auction-ID: A3-46142-11479

Used Fami CNC Tool Trolley – Tool trolley incl. tool holders For tools and milling holders Accessories for CNC machines Manufacturer: Fami storage tool systems Max load: 550 kg. Dimensions: 51 x 107 x 90 cm Auction-ID: A1-50936-276

Large black metal frame with X/Y/Z axes Stepper / servo motors (PCB22, etc.) Ball screws, drag chains Auction-ID: A1-51157-28

vertical CNC turning center, year 2008, CNC OSP-P200L. Used machine. More info & price on IndustrialBuyer.

KEKEISEN PFW-T 4000/12 portal milling machine in a heavy, rigid design for machining large and heavy workpieces. Travel paths of 4,000 x 2,700 x 1,200 mm and a large worktable of approximately 4,000 x 1,800 mm with a table load capacity of 10,000 kg enable the machining of large-volume components. The machine is equipped with a universal milling head with 2 swivel axes and 5 - 1 degree steps NC controlled - adjustable positions (manually or optionally NC-controlled). Hirth gearing ensures precise angle settings. Powerful main spindle drive with approximately 30 kW. Speed range 20 – 7,000 rpm, maximum torque of approximately 1050 Nm. Additional equipment includes a 60-tool changer (KWE60), Chip conveyor, KNOLL filtration system, Hydac cooling units, and central lubrication. Feed rate up to 4 m/min, rapid traverse up to 18 m/min, and feed forces of approximately 30,000 N per a ...

turning diameter: 275 mm turning length: 900 mm control: TRAUB TX8i Main- opposite spindle: spindle passage: 65 mm power capacity at 100 % load: 25,20 kW power capacity at 40 % load: 30,20 KW max. torque at 40% / 100% load: 180 / 135 Nm spindle turning speed - stepless: 1 - 5.000 U/min spindle diameter in front bearing: 110 mm C-axis: 1 - 500 U/min worktool support: No. 1 x-axis: 290 mm y-axis: 165 mm z-axis: 600/950 mm B - axis: 360 ° rapid traverse X/Y/Z: 18 / 18 / 30 m/min feed capacity X/Y/Z: 10 / 10 / 7 kN number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8.000 / 2.000 U/min power capacity at 25 % load: 5,80 kW max. torque at 25% load: 4x18,6 / 4x74 Nm tool taper: TRAUB Ø60 worktool support: No.2 / No.3 / No.4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid traverse X/Y/Z: 18 / 15 / 30 m/min feed capacity X/Y/Z: 10 / 10 / 7 k ...

turning diameter: 210 mm turning length: 700 mm control: Okuma OSP-E 100 L total power requirement: 35,7 kVA weight of the machine ca.: 7,1 t dimensions of the machine ca.: 2660 x 2000 x 2330 mm CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2  ...

Deckel FP4MA 2204 - CNC Tool Milling Machine - 2022 refurbished - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Hydraulic tool clamping - Automatic manual transmission - Automatic clamping in the X, Y and Z axis - Automatic central lubrication - Coolant device - Direct displacement measurement - Anti-collision clutch in the Y and Z axes - Year of construction 1988 - Incl. tool holders, drilling/milling tools & tool trolleys Specifications Working Range: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head can be moved manually on the headdle block: 150 mm Main Drive: - Pole-switchable three-phase brake motor: manual transmission with clockwise/cou ...

Bridgeport Interact 1 CNC Milling Machine Type: CNC milling machine Manufacturer: Bridgeport Model: Interact 1 X-axis travel: 457 mm Y-axis travel: 305 mm Z-axis travel: 365 mm T-slot table size: 410 x 1065 mm Speed range: up to 4000 rpm Machine weight: 1600 kg Dimensions (L x W x H): approx 1700 x 1300 x 2300 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-19

Twin-spindle configuration with pallet changer HSK-A63 spindles Auction-ID: A1-47368-3502

Manufacturer: FIL FRESATRICI (Italy ) Model: FCM Type: FCM 600 Serial Number: L1090 Year of Manufacture: 2000 Controler: Heidenhain TNC426 Machine Type Category: CNC Milling Machine Bed-type / moving table milling machine Or travelling column machining center Travels X (longitudinal): 6000 mm Y (cross): 600 mm Z (vertical): 1000 mm Spindle Taper: ISO 50 Spindle Speed: 6000 rpm Motor Power: ~10 – 25 kW Auction-ID: A1-51153-71

Hyundai Plate Compactor – model CNP50C/57 Hyundai Power Products vibratory plate, equipped with a 79 cc petrol engine with a power of 2.8 hp. The vibratory plate has a base plate of 47 × 30 cm and a specified compaction depth of approximately 20 cm. Suitable for compacting sand, gravel and soil in paving work, garden projects and light construction work. Compact and practical for use on smaller surfaces. Complete with booklets Not seen working Auction-ID: A1-47450-1930

Bridgeport INT 412X CNC Vertical Machining Centre Type: CNC vertical machining centre Manufacturer: Bridgeport Model: INT 412X Year of manufacture: 1991 Serial number: 76159 Taper: ISO 40 X-axis travel: 450 mm Y-axis travel: 310 mm Z-axis travel: 300 mm Speed range: 4,000 - 6,000 rpm Workpiece weight max.: 250 kg T-slot fixture table size: 840 x 320 mm Motor power: 5.5 kW Approx. machine dimensions (L x W x H): 1,900 x 2,100 x 2,300 mm Approx. machine weight: 2,200 kg Automatic Tool Changer (ATC), typically 12 tools. Max. tool diameter approx. 75 mm. Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-18