cm used for sale

Hydraulic unit pump Vickers 35V 30kW Pump 35V - 81121 cm3 / r Electric motor 380 / 660V power - 30 kW, speed - 1470 rpm Tank dimensions: 123x81x50 cm Condenser electric motor 380V , 0.75 kW, 1470 rpm

used baler Manufacturer: BOA Type: IMPRESS D225-Eco Year of construction: 2022 Operating hours: 1.178 (am 29.03.2023) Specifications: Pressing force: 2112 kn / 215 t Specific pressing force: 16.0 kg/cm² Filling opening: 1,620 x 1,000 mm Bale format: 1,100 x 1,200 x length (adjustable) mm Drive power: 3 x 45 kW theoretical output: approx. 750 m³/h (without material) Throughput under operating conditions: - at 30 kg/m³ approx. 16-18 t/h - at 60 kg/m³ approx. 28-30 t/h - at 100 kg/m³ approx. 40-42 t/h - at 150 kg/m³ approx. 50-52 t/h - at 200 kg/m³ approx. 62-64 t/h Total connected load: 250 kW / 500 A Operating voltage: 400 V / 50 Hz electrical insulation: IP 54 Binding: 5 x vertical + 5 x horizontal Bale weight: up to approx. 1,400 kg Machine dimensions: 13,400 x 2770 x 3,065 mm (L x W x H) Machine width wit ...

350 Ton Crawler Crane KOBELCO”, Model CKE4000C Mastertech (2007) Max. Lifting Capacity - 350 t /6.0 m Boom Length - 18 m to 78 m Main & Aux. winch Max . Line speed: 130 m/min (5th layer) Wire Rope: 28 mm Brake Type: Spring set hydraulically release brake Working speed Swing Speed: 1.3 min-1 {rpm} Travel Speed: 1.0/0.4 km/h Power Plant HINO”, Model K13C-UV Engine Output: 295 kW/2,000 min-1 {rpm} Fuel Tank Capacity: 600 liters Hydraulic System Main Pumps: 6 variable displacement pump Max. Pressure: 31.9 MPa {325 kgf/ cm2 } Self-Erection Device Weights Operation Weight: Approx. 346 t Counterweight: Std. 120 t (Upper) + 41 t (Lower) Transport Weight: 60.0 t (Main machine) Ground Pressure: 150 kPa {1.52 kgf/cm2 } Make KOBELCO Year 2007 Capacity 350

- min. Kantendicke: 0,4 mm - max. Kantendicke: 3 mm - max. Kantenhöhe: 65 mm - Geschwindigkeit: 2, 4, 5, 6 m/min - Temperatur: 120C - 200C - Inhalt Leimbecken: 230 cm³ - Aufheizzeit: ~8 min - im Systainer T-Loc IV - Spannung: 230 V, 50/60 Hz - Leistung: 830 W

clamping force: 1.300 kN injection volume: 106 / 43 cm³ screw diameter: 30 / 25 mm platen size: 850 x 750 mm daylight between platens - max.: 900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 2000 kN injection volume: 251 cm³ screw diameter: 40 mm platen size: 1.050 x 900 mm daylight between platens - max.: 880 mm Condition: used, very good condition Specification: Vertical injection moulding machine, with rotary table injection unit: - screw diameter: 40 mm - injection volume: 251 cm³ - Injection flow: 244 cm³/sec - Spec. injection pressure: 1,300 bar - Spec. injection pressure increased: 2,020 bar - Nozzle stroke: 500 mm - Nozzle pressure: 51.9 kN Clamping unit: - Clamping force max.: 2,000 kN - Clamping platens hor. x vert. 820 x 459 mm - Max. platen distance: 880 mm - Opening stroke: 400 mm - Mould installation height: 480 mm - Ejector stroke: 105 mm Number of heating zones incl. nozzle: 4 - Heating power: 9.3 kW - Weight clamping unit: 11,000 kg - Weight injection unit: 3.500 kg - Wei ...

ERNST EG3M deburring machine was built in 1988 in Germany. The surface machining of workpieces with a maximum thickness of 70 mm is performed dry” by means of a burr-removing sanding roller installed in the machine and two brush rollers moving in the opposite direction intended for edge rounding. To prevent the workpiece from being drawn into the centre of the ERNST EG 3 M deburring machine, the sheet to be deburred is pressed onto the conveyor belt via a driven roller on slack bearings. The ERNST EG 3/M 1400 automatic deburring machine also allows the use of a magnetic belt to process smaller workpieces. The total weight of the deburring machine is 3500 kg. Technical data of the ERNST EG3M deburring machine - maximum workpiece thickness: 70 mm - minimum workpiece thickness: 1 mm - minimum workpiece length: 350 mm - minimum workpiece length on magnetic band: 80 mm - minimum wor ...

Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available

(side-front moving table) Nominal force: 1000 ton Slide stroke: 400 mm Continuous slide strokes per 1 min: 20 Single slide strokes per 1 min: 16 Shut height: 1060 mm Slide adjustment: 320 mm Table dimensions: 3150x1800 mm Slide dim., front-back: 1700 mm Window H 1500 x W 1900 mm Hydro pneumatic cushion in table clamping force at P = 0.42 MPa (P = 4.2 kg / cm2), kN 2000 ejection force P = 0.45 MPa (P = 4.5 kg / cm2), kN 200 Main-drive electric motor power: 132 kW DIMENSIONS: 5150x4700x11400 H floor7830 mm WEIGHT:193 ton

CANON OCÉ ARIZONA 460XT large format printer built in Canada in 2013, is designed to provide the user with near photographic quality of prints with excellent text clarity. To make this possible, the CANON inkjet printer uses a piezoelectric method, during which special crystals change their shape and volume under tension and pressure on a membrane, and then splash under high pressure onto the printed surface. The use of this technology results in excellent image sharpness, density and uniformity, both while printing on a roll media and on a flat substrate. The OCÉ ARIZONA 460XT UV flatbed printer has an extra large work table with a vacuum system, with which oversized media with a maximum size (L x W) of 3060 x 2510 mm are held stationary to ensure accurate registration of multiple prints. Printing of large-format media uses a piezo head configured for CMYK + WHITE colour support, w ...

Diesel engine, water-cooled, 3-cyl., 980 cm³ displacement, 16 kw/22 hp/3,000 rpm., operating hours only approx. 252, technically perfect condition. Complete with starter and alternator, optionally with other add-on parts such as radiator, centrifugal clutch, control panel. Parts of the same type are available from disassembly: starter, injection pump, crankshaft, camshaft, alternator, air filter, silencer, radiator - also matching centrifugal clutch with pulleys, etc. Isuzu diesel 2 AB1 with 17 kw and 3AB1 with 25 kw power in stock. Other engines available: Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. - Power from 4.5 – 100 kw, used, partly as good as new. Shipping possible. Prices on request. For pick-ups etc. Appointments are required. ------ Jodau Municipal, Environmental & Green Care Technology ------ ...

They are offered from a working measuring machine Electronic components and Heidenhain External impulse formers All prices VB or against bid 1st 1St Renishaw Autochange Control Unit ACC2-2 Closing at the back: Pics in ; Pics out ; RS232 ; CMM ; Rack Price 890.-EUR 2. 1 Pcck Renishaw Probe Head Controller PHC 10 Serial K14908 Connection at the back: output ; IEEE ; RS232 ; Head ; PHD10 Price 490.-EUR 3. 1 Pcs Renishaw Sample Interface Price 490.-EUR 4. 3 Stueck Heidenhain External Pulse Converter Electronics (Measured value converter) EXE 610 C with manual Price 190.-EUR / Stck Special price

Capacity: 4000-6000 cups / h Lane: 4-lane longitudinal machine Required air pressure: 5.000 l / h Main filler: - for liquid products -filling range 100-500 cm³ -cleaning: CIP able Actual Cup Size: Ø 95 mm height 70 mm Max Cupsize: Ø 95 mm height 100 mm Power: 380 V / 10 A / 3.5 kW Condition: general overhauled

CEMIL TR550A quick miter saw with electronic movable stop, Working direction from left to right, consisting of: - motorized roller conveyor at the entrance, measures 4000x600 mm, with additional manual stop - fast lower miter saw model TR550A with: Double button cutting control blade D=550mm Engine HP 7,5 , volt 380 useful cutting capacity (HxW) mm 30x397 / 100x347 / 165x175 ELAP CM77 control for cutting programming (recently changed keyboard) - motorized roller conveyor at the outlet, length 5400mm, with: electronic stop, useful stroke 5150mm (4900mm with protection mounted at cutting side) .. transverse supports with wheels and automatic pneumatic ups / downs, for side discharge - frame with inclined supports with rollers for unloading cut pieces, measures about 4500x1500mm Total size about 10 x 2.5 meters. Machine according to CE standards

(Schloemann) Beche DGH 40 Ton ( Revamped by Schuler group 2019) Manufacturer: BECHE (Schloemann) Type: DGH 40 YOM: Revamped 2019 Machine Number: 2412-HW Including 12 Ton Wellman manipulator Impact work: 40,000 mkg Total bar lift.:1.250 mm Maximum number of strokes:80 Pro Minute Average score: 6 Pro Minute Air consumption per ten blow Blow in . m in required air at the strongest hit: 6.8 Cold Air Compressor performance in m3/min: 41 Cold Air Compressor performance in m3/min:27 Hot air (160° C) Power requirement of the compressor in hp:260 Cold Air Power requirement of the compressor in hp:180 Cold Air Air tank capacity:30 m3 Steam consumption per hit with the strongest hit:3.5 kg Steam consumption per minute (saturated steam):21 kg Clear width between the guides: 1200 mm Maximum singing sounds: 2700 mm Lowest overall height of the dies without dovetail: 575 mm O ...

Veneer press - School press - Experimental press BÜRKLE U40 built 1979 Ges. Power: 6.25 kW Nominal operating current: 14.5 A Power per heating plate: 2,750 W Plate size: 120 x 80 cm Electric Aluminum Heating Plates max. temperature: 120° C Opening width: 40 cm 4 hydraulic cylinders each with a diameter of 70 mm Nominal surface pressure: 4 kp/cm² max. surface pressure at 75% surface design: 5.5 kp/cm² Operating pressure: 260 bar Circumferential safety ripcord (emergency stop) Automatic opening (automatic opening after the preset time has elapsed) Press frame in dismountable design Weight: 1,350 kg Machine dimensions (approx. dimensions): L 165 cm W 96 cm H 173 cm School machine - The machine comes from a school training center.

Brand: Olympia Year of manufacture: 1991 Engine: Chevrolet 5 000 cm3., 8 cylinders, 130 hp Drive: 4 x 4 Transmission: Automatic Water tank: 568 L. Tank for snow: 2915 cm3 Weight: 2758 kg Working hours: 939 Condition: Very nice

clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 17 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1450 bar - Spec. injection pressure increased: 2210 bar - Nozzle path: 200 mm - Operating hours: 54716 h - Pump drive  ...

Brand: Olympia Year of manufacture: 1994 Engine: Chevrolet 5 000 cm3., 8 cylinders, 130 hp Drive: 4 x 4 Transmission: Automatic Water tank: 568 L. Tank for snow: 2915 cm3 Weight: 2758 kg Working hours: 6588 Condition: Very nice

clamping force: 1.750 kN injection volume: 318 cm³ screw diameter: 45 mm platen size: 700 x 700 mm daylight between platens - max.: 460 mm Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ZREMB GH4 tube bending machine, manufactured in 1983, is used in factories during the precise processing of all varieties of installation tubes. The tube bending is performed in a semi-automatic mode on a cam with the mandrel filling the most deformed section of the tube. The machine comes with a comprehensive range of equipment shown in the accompanying photos. The GH4 mandrel bending machine weighs 2450 kg. The ZREMB tube bending machine consists of: – drive mechanism – mandrel feed mechanism – guiding mechanism – control panel mechanism – hydraulic system – electrical installation assembly – frame assembly Technical specification of the ZREMB GH4 bending machine - tube diameters: 1 ½”; 2″, 2 ½”; 3″, 3 ½”; 4″ - maximum bending angle: 180° - bending capacity (30 bends): 180°/h - head working movement time (180°): 38 s - head return movem ...

Europress EP 6500 V5 H4, pressing force 120 t, year of construction 2009, drive power 75 kW, only 15,334 operating hours, overhauled Specifications: Manafacture: Europress Type 6500 V5 H4 Year of construction: 2009 Operating hours 15,334 hours, as of January Number of pressed bales 138,097 bales, as of January Pressing force main press 120 t Specific pressing force 142 kg/cm² Dimensions insertion chute 1,650 x 1,100 mm Filling volume 3 m³ Filling volume / pressing cycle 1.58 m³ Bale dimensions 730 x 1,100 Length variable Drive power 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total connected load 83 kW Current consumption 150 A Binding 5-fold vertical, 4-fold horizontal, fully automatic Bale weights 450 to 900 kg, depending on bale length and material Hydraulic oil tank volume 1,200 L PLC control (manuf., type) Siemens S7-200 Control Panel (Manufactur ...

Table dimensions: - mm Motor output: 7,5 kW Spindle diameter: 40 mm reus: 6000 U/min Weight: 300 kg Year: 2018 Universal profiler Götzinger UP 1730 Machine for frontal and cross-side machining. Different application technology for wood products First-class surface quality of machined workpieces due to high speed, Particularly stable bearing of the milling shaft and through synchronous milling. Rapid tool change through one-sided mounted cutter shaft and through swiveling clamping device. The whole work process, such as clamping, pneumatic-hydraulic table feed with speed control (stepless) and fast reverse. By exchanging the milling segments and by changing the attachment points can be up to ten different with a single profile milling set Create profile companies. Technical specifications: Cutting depth max .: 30 mm Milling height max .: 150 mm Voltage cross section per stroke max. Softw ...

Wilo IL50/270-4/4-S1 glanded single pump 4000W pump 2060085/0810, 4kW, IL50 270-4/4-S1, centrifugal pump, 3~400/690 V, 50 Hz, DN50 PN16 Condition: unused item, but showing slight signs of storage (see pictures) EAN: 4016322797777 Manufacturer's specifications for technical data:Hydraulic dataMinimum Efficiency Index (MEI)0.4Minimum. Liquid temperature T min-20 °CMax. Liquid temperature T max140 °CMax. Ambient temperature T max40 °CMaximal operating pressure PN16 barNote on dimensioning16 bar to 120 °C, 13 bar to 140 °C Motor dataMains connection3~400 V, 50 HzVoltage tolerance±10 %Motor efficiency classIE3Nominal power P 24 kWBrated current I N8.2 ANominal speed n1450 1/minPower factor cos φ0.79Motor efficiency η M 50 %85.8 %Motor efficiency η M 75 %87.6 %Motor efficiency η M 100 %88 %Motor winding up to 3 kWMotor winding from 4 kW insulation classFSuity motorIP55 ...

Wisconsin 2-Cyl. Petrol engine, 7.5 kw/10 hp, air-cooled, 688 cm3,with horizontal crankshaft. E-starters, air filters with filter cartridge, Oil filter, autom. intake air preheating, oil deficiency and overheating protection, sep. Starter rope. Unused from BW stock. 24 pieces available, originally packed in transport boxes of 2 pieces each. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Used sachet packaging machine made by Consumasz AP-10/240. New 1998. Technical parameters: Dimensions: - length 1350 mm - width 1520 mm - height 2350 mm - weight: approx. 450 kg - sachets dimensions: width   85 to 115 mm (for two-track operation)   85 to 180 mm (for single-track operation) length   80 to 240 mm - product volume in sachet: 5 to 150 cm3 - power consumption: 1.5 kW - service: 1 person Efficiency: - in a two-track system up to 80 sachets / min - in the single-track system up to 40 sachets / min

automatic baler Manafacture: UNOTECH Type: UPAMAT 100 V 5 Year of construction: 2014 specifications: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Duct format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Nominal current consumption: 175 A Connection fuse max. 200 A Pump: Internal gear pump Noise emission: 82 - 85 dB/A Machine weight: 32,000 kg Control: Siemens S7 - IM-151 Output: approx. 340 m²/hour under operating conditions Throughput: at 30 kg/m³ bulk density approx. 10.0 t/h at 50 kg/m³ bulk density approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central lubrication point Large-digit display  ...

WEINIG / GreCon Short Wood Finger-jointing Line Ultra TT Data of the system: • Wood inlet length (min. - max.) 150 - 1000 mm (1300 mm) • Reference timber inlet length at the finger-jointing line 400 mm • The length of the wood to be processed must be at least 25 percent longer than the width of the wood to be processed • Wood thickness (min. - max.) 20 - 80 mm • Reference wood thickness 28 mm • Wood width (min. - max.) 40 - 205 mm • Reference wood width 90 mm • Reference wood cross-section 28 mm x 90 mm • Wood outlet length (min. - max.) 3000 - 6100 mm • Reference wood outlet length 6100 mm • Tine profile (length) 10 – 11 mm • Max. wood cross-section for processing softwoods (with specified tine length) 100 cm² • Max. wood cross-section for processing hardwoods (with specified tine length) 80 cm² • Glue type PVAC • Species: Softwood / ...

Truck DAIMLER CHRYSLER Actros 2644 with loading crane HIAB 330-5 + Jib 90-4 Truck DAIMLER CHRYSLER Actros 2644, B9th3af Wheel drive 6x4, air suspension front and rear, AHK, open box with charger, FG-No. WDB9302441xxx EZ 06/04, GG 26 t, km-stand approx. 417,000, diesel, green badge, HU 09/19, 11.946 cm3, 320 kW Crane Hiab 330-5 with radio remote control Jib 90 with winch Rotzler, 3 hydraulic ejectoons + 1x mechanical ejectothe. Maximum extension 26m with lifting force 690kg

- Manufacturer: RATIONAL - Model: CombiMaster Plus CMP 101 G - Capacity: 10 x 1/1 GN - Number of meals/day: 80-150 - Power: 0.5 kW - Dimensions (D x W x H): 776 x 847 x 1042 mm - Weight: 167 kg - Water inlet (for compressed air hose): 3/4'' / d 1/2'' - Water Pressure (Flowing Pressure): 150-600 kPa / 0.15-0.6 Mpa / 1.5 - 6 bar - Nominal heat load LPG liquid gas "Steam": 20 kW - Nominal heat load Total natural gas: 22 kW - Nominal heat load Natural gas "Steam": 20 kW - Nominal heat load Natural gas "Forced Air": 22 kW - Steam mode: 30°C to 130°C - Forced air mode: 30 °C to 300 °C - Mixed mode (combination of steam and forced air): from 30 °C to 300 °C - 3 automatic cleaning programs - 5 air speeds: Rather low or high, the CombiMaster® Plus has the right speed for every food.

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Cmvlgfoyc - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide

Fully functional FARO Arm Measuring Arm Prime High Precision 3D Measuring Instrument Quality Control Year of construction: December 2012 Certification date: August 2014 Number: R04-02-12-28398 Single Point: 0.016 mm Volumetric: +/- 0.023 mm Made in Germany The Best Portable Coordinate Machine (CMM) High Measurement Accuracy, Measurement Stability Reduced inspection times, automatically generates reports Ready to use in a few seconds Measure parts and assemblies quickly, easily and precisely Ideal for complex measurement tasks Solid measuring plate with trolley table, 336 kg Drawer with key Degree of accuracy: DIN 876/1 Permissible deviation: 0.02 mm Actual deviation: 0.00589 mm Checked on 05.03.2013 Made in Germany With various accessories Measuring arm case HP PC Tower Screen Keyboard Lots of software e.g. Cam2 Measure 10, Nvidia Graphics, Windows, HP

NEGRI BOSSI - SACMI 1300 Ton HIGH TONNAGE 2014 Model BI-POWER VH1300 /12100 120mm Screw Calculated Injection Volume 7351 cm3 Shot Weight 6689 Grams Space between HxV Tie Bars 1400 x 1200 ASK FOR VIDEOS

pressure: 60 t square edge steel: 35,0 mm round bar steel: 40,0 mm L-beam: 120 mm punching cross-cut in cmm: 28 in 15 mm throat: 220 mm flat steel: 300 x 15 mm oil volume: 45 ltr. total power requirement: 4,0 kW weight of the machine ca.: 1.250 kg. Dimensions (HxWxD): 1510 x 590 x 1570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- max welding current: 200 A - max welding voltage: 27 V - Total power: 10.6 kW - Machine weight: 88 kg - Weight wire feed unit: 17 kg - Space requirement (W x D x H): 376 x 684 x 381 mm Details with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version is manual power source

punching pressure: 28 t punching cross-cut in cmm: 31 in 7 mm round bar steel: 32,0 mm throat: 250 mm dayligth: 223 mm no. of strokes: 10 - 30 Hub/min oil volume: 32 ltr. work height max.: 1.033 mm total power requirement: 3,0 kW weight of the machine ca.: 553 kg. dimensions of the machine ca.: 730 x 540 x 1530 m Furnishing: - Quick-change punch device up to Ø 31 mm - green series - - built-in: round punch no.5 Ø 25.0 mm and round die no.3 Ø 25.7 mm - Free: LED lighting in the punching area - swiveling scraper (plates exchangeable) - Various material support tables are available separately - support frame - 2-step foot switch, with double press for grain search function - electrical controls - Infinitely adjustable stroke length and stroke position - Integrated hydraulic unit with oil filling - Performance data apply to a material strength of 450 N / mm² The data for this ad was cr ...

Yale GLP55VX V2514 Counterbalance Truck VX Series Designed for medium and demanding applications The Yale Veracitor VX Series is a feature-rich series of internal combustion engine forklifts that combines the highest levels of productivity, ergonomics and reliability with a low (total) cost of ownership. The 40-55VX models are designed to provide customers with choices to meet different application needs. Available in three model configurations: the Base model offers low initial cost without compromising performance, the Value model offers high performance with very low operating costs, and the Productivity model guarantees superior performance in heavy-duty applications. Load-sensing hydraulics (LSH) increases productivity and reduces fuel consumption by up to 15% (VDI test); In the "ECO-eLo" fuel efficiency mode, fuel consumption can be reduced by up to 20% without signifi ...

KBA Rapida 76-5 + L SAPC ALV2 UV Age: 2012 Counter: 105 mio. Impression Max. size: 60.5 x 75 cm Printing format max.: 59.5 x 74 cm Max. paper thickness: 0.8 mm Max. performance: 18,000 sheets/hour Equipment: 5x printing units 5x UV Interdeck Drivetronic SIS Airtronic Cleantronic Air Control Alcolor Technotrans Alpha.C cooling device Ink temperature control Semi Automatic Plate changing system Automatic washing devices Harris & Bruno Coating Unit with Anilox 13 cm3 Extended Delivery IR and UV Dryer with 2 lamps Powder Sprayer Nice to know: -Machine is equipped with standard rollers -All Units have UV-Interdeck -UV system is classic. No LED -Machine has 5 power supplies for UV lamps and 5 UV lamps. They can be used in any configuration on machine.

Universal mixer Volume: 400 ltr. Material : areas in stainless steel that are in contact with the product; Main drive: 18 / 22 KW, 1500 - 3000 rpm; Bucket speed: 70 - 140 rpm; 1 x knife head, Knife head motor: 3/4 KW, 1500 - 3000 rpm; Operating pressure: 4 - 6 kg / cm2, max. Pressure: 10 kg / cm2. --> With base; --> 2 identical mixers in stock.

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

✓ Year of manufacture December 2015 ✓ First installation June 2016 ✓ Impression Counter: 44.7 million impressions (status from yesterday) ✓ 7 colours authorized and installed ✓ Unwinder with max. roll diameter of 800 mm ✓ Priming Unit and Corona Treatment Unit ✓ Rewinder with max. roll diameter of 800 mm ✓ Blanket Automated Replacement System (BARS) ✓ OFIR Kit ✓ PUW Anilox Sleeve High Laydown 3.36 BCM ✓ PUW Anilox Sleeve Low Laydown 2.5 BCM ✓ PUW Rubber Sleeve ✓ Reverse Inspection Bridge (RIB) ✓ Slitting option ✓ HP SmartStream Labels & Packaging Print Server GEN9 ✓ ESKO Version 5.2.3 ✓ HP Authorized Software Version 1.0081.0.0.135 ✓ Machine comes without Chiller Unit ✓ Machine is technically in good condition ✓ Machine is still in HP Service Contract Technical Specifiations: Printing speed: Up to 34 m/min CMYK | Up to 26 m/mi ...

clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: -- kN injection volume: 230 cm³ screw diameter: 40 mm platen size: 475 x 475 mm Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Year of manufacture End of 2016 - First Installation 2017 - Second installation at the current owner after reconditioning by Xeikon in September 2021 - Total printed: 8.24 million Printed meters (status from 03.08.23) - Running hours around 5.500 hours - Electrography using Xeikon Cheetah dry toner QB-CH - 5 x High-Precision LED Printing Heads (CMYK + White) - Unwinder Year of manufacture October 2016 - Rewinder Year of manufacture 2017 - Media Width: 200 mm – 330 mm | Printing Area: max 322 mm x 55 m - Media Weight: 40 - 350 gsm (40 - 550 microns) - Speed 4/C: Up to 30 m/min - Resolution: true 1.200 dpi at 4 bit (1.200 x 3.600 dpi addressability) with variable dot density - Substrates: SA or PS Label (Paper, PP, PET, Vinyl, co-extruded film), Paper, Paperboard, Transfer substrate - Digital Front-End X 800 with Control PC and 2 monitors - Xeikon Workflow x 800 Verse 7. ...

Akyapak APK 121 Profile Bending Machine Machine is in very good condition Machine has pulling tool Max. section modulus cm3 : 120 Motor Power : 15 KW Rolls diameter : 390 mm Shaft diameter : 120 mm Bending speed : 6m/min

Year of manufacture: 2011 Screw diameter: 100 mm Weight: 4006 cm3 PS injection weight: 3645 g Closing force: 1300 t

Year of manufacture: 2015 Screw diameter: 55 mm Chamber volume: 665 cm3 Shot weight: 604 g

Following separator available for sale. Make: ALFA LAVAL Type: MMPX 403 SGP-11 Serial Number: 4119247 Year: 2002 Product No.: 881099-03-01 Inlet & Outlet: 561312-01 Bowl: 561123-01 Machine Bottom part: 561371-01 Max Speed (Bowl): 9365 r/min Speed Motor Shaft: 3600 r/min HZ: 60 KW: 2.5 Maximum Density of Feed: 1100 kg/cm2 Maximum Density of Sediment: 2631 kg/cm2 Maximum of operating Liquid: 1000 kg/cm2 TEMP: 0/100 Deg.C MOTOR Make: ABB Volt: 380/420/220/240D / 40/480/250/280b HZ: 50/60 AMP: 4.6/8.00 / 4.67/8.00 RPM: 2880/3470 KW: 2.2 /2.5 COS Q: 0.87 / 0.86

DEMAG ET 650/5200 - non-functional broken column Robot - broken year of manufacture: 1997 v. no. 8631032 auger: 95 mm weight: 2835 cm3 closing force: 650 t clamping plates: 1450/1350 between columns: 1000/900

POTVEL 35 vertical electric press Distance between columns: 35x27 Maximum pressure 210 Kg / cm2